summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/gvt/mmio.c
AgeCommit message (Collapse)Author
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-04-25fix missing vmalloc.h includesKent Overstreet
Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-19drm/i915/dpio: Extract bxt_dpio_phy_regs.hVille Syrjälä
Extract the BXT/GLK DPIO PHY register definitions into their own file. v2: Adjust gvt accordingly Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417151232.32175-1-ville.syrjala@linux.intel.com
2022-11-03drm/i915/dpio: move dpio_channel and dpio_phy enums to intel_dpio_phy.hJani Nikula
Reduce the size of intel_display.h by moving out the dpio_channel and dpio_phy enums. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7c3ee7a6482540a0267f7b2974d22cab8188707a.1667383630.git.jani.nikula@intel.com
2022-04-21drm/i915/gvt: devirtualize ->{read,write}_gpaChristoph Hellwig
Just call the VFIO functions directly instead of through the method table. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-14-hch@lst.de Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
2022-02-02drm/i915: Only include i915_reg.h from .c filesMatt Roper
Several of our i915 header files, have been including i915_reg.h. This means that any change to i915_reg.h will trigger a full rebuild of pretty much every file of the driver, even those that don't have any kind of register access. Let's delete the i915_reg.h include from all headers and add an explicit include from the .c files that truly need the register definitions; those that need a definition of i915_reg_t for a function definition can get it from i915_reg_defs.h instead. We also remove two non-register #define's (VLV_DISPLAY_BASE and GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the i915_reg.h include from a couple of headers. There's probably a lot more header dependency optimization possible, but the changes here roughly cut the number of files compiled after 'touch i915_reg.h' in half --- a good first step. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
2022-02-02drm/i915: Move GT registers to their own header fileMatt Roper
This is a huge, chaotic mass of registers copied over as-is without any real cleanup. We'll come back and organize these better, align on consistent coding style, remove dead code, etc. in separate patches later that will be easier to review. v2: - Add missing include in intel_pxp_irq.c v3: - Correct a few indentation errors (Lucas) - Minor conflict resolution Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
2020-11-10drm/i915/gvt: Fix virtual display setup for BXT/APLColin Xu
Program display related vregs to proper value at initialization, setup virtual monitor and hotplug. vGPU virtual display vregs inherit the value from pregs. The virtual DP monitor is always setup on PORT_B for BXT/APL. However the host may connect monitor on other PORT or without any monitor connected. Without properly setup PIPE/DDI/PLL related vregs, guest driver may not setup the virutal display as expected, and the guest desktop may not be created. Since only one virtual display is supported, enable PIPE_A only. And enable transcoder/DDI/PLL based on which port is setup for BXT/APL. V2: Revise commit message. V3: set_edid should on PORT_B for BXT. Inject hpd event for BXT. V4: Temporarily disable vfio edid on BXT/APL until issue fixed. V5: Rebase to use new HPD define GEN8_DE_PORT_HOTPLUG for BXT. Put vfio edid disabling on BXT/APL to a separate patch. Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201109073922.757759-1-colin.xu@intel.com
2020-09-10drm/i915/gvt: Init vreg GUC_STATUS to GS_MIA_IN_RESETColin Xu
Although GVT doesn't support guest GuC, MIA core is still expected to be GS_MIA_IN_RESET after uc HW reset. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200819010900.54598-1-colin.xu@intel.com
2020-03-06drm/i915/gvt: Wean gvt off using dev_privChris Wilson
Teach gvt to use intel_gt directly as it currently assumes direct HW access. [Zhenyu: rebase, fix compiling] Cc: Ding Zhuocheng <zhuocheng.ding@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-3-zhenyuw@linux.intel.com
2020-02-24drm/i915/gvt: Make WARN* drm specific where vgpu ptr is availablePankaj Bharadiya
Drm specific drm_WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @@ identifier func, T; @@ func(struct intel_vgpu *T,...) { +struct drm_i915_private *i915 = T->gvt->dev_priv; <+... ( -WARN( +drm_WARN(&i915->drm, ...) | -WARN_ON( +drm_WARN_ON(&i915->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&i915->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&i915->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-9-pankaj.laxminarayan.bharadiya@intel.com
2019-03-11drm/i915/gvt: remove the unused sregYan Zhao
code cleanup. sreg is not used now. remove it for code cleanness. v3: remove unnecessary array_size in vreg's memory allocation (min he) v2: do not allocate memory for sreg. (min he) Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-01-23drm/i915/gvt: switch to kernel typesJani Nikula
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-27BackMerge v4.19-rc5 into drm-nextDave Airlie
Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-09-18drm/i915/gvt: Init PHY related registers for BXTColin Xu
Recent patch fixed the call trace "ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)". but introduced another similar call trace shown as: "ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)". The call trace will appear when host and guest enabled different ports, i.e. host using PORT C or neither PORT is enabled, while guest is always using PORT B as simulated by gvt. The issue is actually covered previously before the commit and reverals now when the commit do the right thing. On BXT, some PHY registers are initialized by vbios, before i915 loaded. Later i915 will re-program some, or skip some based on the implementation. The initialized mmio for guest i915 is done by gvt, based on the snapshot taken from host. If host and guest have different PORT enabled, some DPIO PHY mmios that gvt initialized for guest i915 will not match the simualted monitor for guest, which leads to guest i915 print the calltrace when it's trying to enable PHY and PORT. The solution is to init these DPIO PHY registers to default value, then guest i915 will program them to reasonable value based on the default powerwell table and enabled PORT. Together with the old patch, all similar call trace in guest kernel on BXT can be resolved. v2: Move PHY register init to intel_vgpu_reset_mmio (Min) v3: Do not delete empty line in issue fix patch. (zhenyu) Fixes: c8ab5ac30ccc ("drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY") Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-06Merge tag 'gvt-next-2018-09-04' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen
drm-intel-next-queued gvt-next-2018-09-04 - guest context shadow optimization for restore inhibit one (Yan) - cmd parser optimization (Yan) - W=1 warning fixes (Zhenyu) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # Conflicts: # drivers/gpu/drm/i915/gvt/reg.h From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904030154.GG20737@zhen-hp.sh.intel.com
2018-08-07drm/i915/gvt: Fix function comment doc errorsZhenyu Wang
Caught by W=1 to fix left wrong function comment doc. Reviewed-by: Hang Yuan <hang.yuan@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-28Merge tag 'drm-intel-next-2018-06-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Chris is doing many reworks that allow us to get full-ppgtt supported on all platforms back to HSW. As well many other fix and improvements, Including: - Use GEM suspend when aborting initialization (Chris) - Change i915_gem_fault to return vm_fault_t (Chris) - Expand VMA to Non gem object entities (Chris) - Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris) - Other page directory handling fixes and improvements for gen6 (Chris) - Other gtt clean-up removing redundancies and unused checks (Chris) - Reorder aliasing ppgtt fini (Chris) - Refactor of unsetting obg->mm.pages (Chris) - Apply batch location restrictions before pinning (Chris) - Ringbuffer fixes for context restore (Chris) - Execlist fixes on freeing error pointer on allocation error (Chris) - Make closing request flush mandatory (Chris) - Move GEM sanitize from resume_early to resume (Chris) - Improve debug dumps (Chris) - Silent compiler for selftest (Chris) - Other execlists changes to improve hangcheck and reset. - Many gtt page directory fixes and improvements (Chris) - Reorg context workarounds (Chris) - Avoid ERR_PTR dereference on selftest (Chris) Other GEM related work: - Stop trying to reset GPU if reset failed (Mika) - Add HW workaround for KBL to fix GPU reset (Mika) - Fix context ban and hang accounting for client (Mika) - Fixes on OA perf (Michel, Jani) - Refactor on GuC log mechanisms (Piotr) - Enable provoking vertex fix on Gen9 system (Kenneth) More ICL patches for Display enabling: - ICL - 10-bit support for HDMI (RK) - ICL - Start adding TBT PLL (Paulo) - ICL - DDI HDMK level selection (Manasi) - ICL - GMBUS GPIO pin mapping fix (Mahesh) - ICL - Adding DP_AUX_E support (James) - ICL - Display interrupts handling (DK) Other display fixes and improvements: - Fix sprite destination color keying on SKL+ (Ville) - Fixes and improvements on PCH detection, specially for non PCH systems (Jani) - Document PCH_NOP (Lucas) - Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville) - Opregion and ACPI cleanup and organization (Jani) - Kill delays when activation psr (Rodrigo) - ...and a consequent fix of the psr activation flow (DK) - Fix HDMI infoframe setting (Imre) - Fix Display interrupts and modes on old gens (Ville) - Start switching to kernel unsigned int types (Jani) - Introduction to Amber Lake and Whiskey Lake platforms (Jose) - Audio clock fixes for HBR3 (RK) - Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo) - Remove unused timespec_to_jiffies_timeout function (Arnd) - Increase the scope of PSR wake fix for other VBTs out there (Vathsala) - Improve debug msgs with prop name/id (Ville) - Other clean up on unecessary cursor size defines (Ville) - Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville) - Make ELD pointers constant (Jani) - Fix for PSR VBT parse (Colin) - Add warn about unsupported CDCLK rates (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-18drm/i915/gvt: Use vgpu_lock to protect per vgpu accessColin Xu
The patch set splits out 2 small locks from the original big gvt lock: - vgpu_lock protects per-vGPU data and logic, especially the vGPU trap emulation path. - sched_lock protects gvt scheudler structure, context schedule logic and vGPU's schedule data. Use vgpu_lock to replace the gvt big lock. By doing this, the mmio read/write trap path, vgpu virtual event emulation and other vgpu related process, would be protected under per vgpu_lock. v9: - Change commit author since the patches are improved a lot compared with original version. Original author: Pei Zhang <pei.zhang@intel.com> - Rebase to latest gvt-staging. v8: - Correct coding and comment style. - Rebase to latest gvt-staging. v7: - Remove gtt_lock since already proteced by gvt_lock and vgpu_lock. - Fix a typo in intel_gvt_deactivate_vgpu, unlock the wrong lock. v6: - Rebase to latest gvt-staging. v5: - Rebase to latest gvt-staging. - intel_vgpu_page_track_handler should use vgpu_lock. v4: - Rebase to latest gvt-staging. - Protect vgpu->active access with vgpu_lock. - Do not wait gpu idle in vgpu_lock. v3: update to latest code base v2: add gvt->lock in function gvt_check_vblank_emulation Performance comparison on Kabylake platform. - Configuration: Host: Ubuntu 16.04. Guest 1 & 2: Ubuntu 16.04. glmark2 score comparison: - Configuration: Host: glxgears. Guests: glmark2. +--------------------------------+-----------------+ | Setup | glmark2 score | +--------------------------------+-----------------+ | unified lock, iommu=on | 58~62 (avg. 60) | +--------------------------------+-----------------+ | unified lock, iommu=igfx_off | 57~61 (avg. 59) | +--------------------------------+-----------------+ | per-logic lock, iommu=on | 60~68 (avg. 64) | +--------------------------------+-----------------+ | per-logic lock, iommu=igfx_off | 61~67 (avg. 64) | +--------------------------------+-----------------+ lock_stat comparison: - Configuration: Stop lock stat immediately after boot up. Boot 2 VM Guests. Run glmark2 in guests. Start perf lock_stat for 20 seconds and stop again. - Legend: c - contentions; w - waittime-avg +------------+-----------------+-----------+---------------+------------+ | | gvt_lock |sched_lock | vgpu_lock | gtt_lock | + lock type; +-----------------+-----------+---------------+------------+ | iommu set | c | w | c | w | c | w | c | w | +------------+-------+---------+----+------+------+--------+-----+------+ | unified; | 20697 | 839 |N/A | N/A | N/A | N/A | N/A | N/A | | on | | | | | | | | | +------------+-------+---------+----+------+------+--------+-----+------+ | unified; | 21838 | 658.15 |N/A | N/A | N/A | N/A | N/A | N/A | | igfx_off | | | | | | | | | +------------+-------+---------+----+------+------+--------+-----+------+ | per-logic; | 1553 | 1599.96 |9458|429.97| 5846 | 274.33 | 0 | 0.00 | | on | | | | | | | | | +------------+-------+---------+----+------+------+--------+-----+------+ | per-logic; | 1911 | 1678.32 |8335|445.16| 5451 | 244.80 | 0 | 0.00 | | igfx_off | | | | | | | | | +------------+-------+---------+----+------+------+--------+-----+------+ Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-05-14drm/i915/gvt: Remove disable_warn_untrack and print untracked mmio with ↵Changbin Du
debug level The disable_warn_untrack never prevent gvt from printing untracked mmio errors. We were disturbed by this error storm and the fix is just adding them to the list with no essential new change. This message is only useful for enabling new platform during developing process. So lower the message level to debug and then remove disable_warn_untrack. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-06drm/i915/gvt: Rename ggtt related functions to be more specificChangbin Du
Accurate names help to avoid confusing so improve readability. Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-06drm/i915/gvt: Rework shadow graphic memory management codeChangbin Du
This is a big one and the GVT shadow graphic memory management code is heavily refined. The new code is more straightforward with less code. The struct intel_vgpu_mm is restructured to be clearly defined, use accurate names and some of the original fields are removed which are really redundant. Now we only manage ppgtt mm object with mm->ppgtt_mm.lru_list. No need to mix ppgtt and ggtt together, since one vGPU only has one ggtt object. v4: Don't invoke ppgtt_free_all_shadow_page before intel_vgpu_destroy_all_ppgtt_mm. v3: Add GVT_RING_CTX_NR_PDPS to avoid confusing about the PDPs. v2: Split some changes into small standalone patches. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-02-06drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=onChangbin Du
When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest is emulated. But the vgpu_aperture_rw() function take wrong offset when do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture. This mistake cause GPU command in guest get lost and so the seqno is not updated in engine HWSP. This patch fix this, and it also move the emulation code to kvmgt. Because only vfio need to emulate it. Put aperture rw to MMIO emulation path breaks assumptions in xengt. v2: Remove PAGE_ALIGN for size (zhenyu) Fixes: f090a00df9ec ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-12-22drm/i915/gvt: move write protect handler out of mmio emulation functionZhenyu Wang
It's a bit confusing that page write protect handler is live in mmio emulation handler. This moves it to stand alone gvt ops. Also remove unnecessary check of write protected page access in mmio read handler and cleanup handling of failsafe case. v2: rebase Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-22drm/i915/gvt: cleanup usage for typed mmio reg vs. offsetZhenyu Wang
We had previous hack that tried to accept either i915_reg_t or offset value to access vGPU virtual/shadow regs which broke that purpose to be type safe in context. This one trys to explicitly separate the usage of typed mmio reg with real offset. Old vgpu_vreg(offset) helper is used only for offset now with new vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage of that to new helper. Also fixed left KASAN warning issues caused by previous hack. v2: rebase, fixup against recent mmio switch change Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-11drm/i915/gvt: refine function emulate_mmio_read/writePei Zhang
These 2 functions are coded by multiple person in multiple patches. The 'return' and 'goto err' are mix-used in same place, which cause the function looks disorder. Unify to use only 'goto' so that the gvt lock is acquired in one place and released in one place. Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-11-16drm/i915/gvt: Factor intel_vgpu_page_trackZhi Wang
As the data structure of "intel_vgpu_guest_page" will become much heavier in future, it's better to factor out the guest memory page track mechnisim as early as possible. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2017-09-08drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approachChangbin Du
For vfio-pci, if the region support MMAP then it should support both mmap and normal file access. The user-space is free to choose which is being used. For qemu, we just need add 'x-no-mmap=on' for vfio-pci option. Currently GVTg only support MMAP for BAR2. So GVTg will not work when user turn on x-no-mmap option. This patch added file style access for BAR2, aka the GPU aperture. We map the entire aperture partition of active vGPU to kernel space when guest driver try to enable PCI Memory Space. Then we redirect the file RW operation from kvmgt to this mapped area. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032 Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Refine virtual reset functionfred gao
during the emulation of virtual reset: 1. only reset the engine related mmio ending with MMIO offset Master_IRQ, not include display stuff. 2. fences are not required to set default value as well to prevent screen flicking. this will fix the issue of Guest screen hang while running Force tdr in Linux guest. v2: - only reset the engine related mmio. (Zhenyu & Zhiyuan) v3: - IMR/Ring mode registers are not save/restored. (Changbin) v4: - redefine the MMIO reset offset for easy understanding. (Zhenyu) - pvinfo can be reset. (Zhenyu) v5: - add more comments for mmio reset. (Zhenyu) Cc: Changbin Du <changbin.du@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Lv zhiyuan <zhiyuan.lv@intel.com> Cc: Zhang Yulei <yulei.zhang@intel.com> Signed-off-by: fred gao <fred.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: Optimize MMIO register handling for some large MMIO blocksChangbin Du
Some of traced MMIO registers are a large continuous section. These stuffed the MMIO lookup hash table and so waste lots of memory and get much lower lookup performance. Here we picked out these sections by special handling. These sections include: o Display pipe registers, total 768. o The PVINFO page, total 1024. o MCHBAR_MIRROR, total 65536. o CSR_MMIO, total 3072. So we removed 70,400 items from the hash table, and speed up guest boot time by ~500ms. v2: o add a local function find_mmio_block(). o fix comments. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-06-08drm/i915/gvt: add RING_INSTDONE and SC_INSTDONE mmio handler in GVT-gWeinan Li
kernel hangcheck needs to check RING_INSTDONE and SC_INSTDONE registers' state to know if hardware is still running. In GVT-g environment, we need to emulate these registers changing for all the guests although they are not render owner. Here we return the physical state for all the guests, then if INSTDONE is changing guest can know hardware is still running although its workload is pending. Read INSTDONE isn't one correct way to know if guest trigger gfx reset, especially with Linux guest, it will read ACTH first, then check INSTDONE and SUBSLICE registers to check if hardware is still running, at last trigger gfx reset when it finds all the registers is frozen. In Windows guest, read INSTDONE usually happens when OS detect TDR. With the difference between Windows and Linux guest, "disable_warn_untrack" may let debug log run into wrong state(Linux guest trigger hangcheck with no ACTHD changed, then check INSTDONE), but actually there is no TDR happened. The new policy is always WARN with untrack MMIO r/w. Bad effect is many noisy untrack mmio warning logs exist when real TDR happen. Even so you can control the log output or not by setting the debug mask bit. v2: remove log in instdone_mmio_read Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-03-17drm/i915/gvt: replace the gvt_err with gvt_vgpu_errTina Zhang
gvt_err should be used only for the very few critical error message during host i915 drvier initialization. This patch 1. removes the redundant gvt_err; 2. creates a new gvt_vgpu_err to show errors caused by vgpu; 3. replaces the most gvt_err with gvt_vgpu_err; 4. leaves very few gvt_err for dumping gvt error during host gvt initialization. v2. change name to gvt_vgpu_err and add vgpu id to the message. (Kevin) add gpu id to gvt_vgpu_err. (Zhi) v3. remove gpu id from gvt_vgpu_err caller. (Zhi) v4. add vgpu check to the gvt_vgpu_err macro. (Zhiyuan) v5. add comments for v3 and v4. v6. split the big patch into two, with this patch only for checking gvt_vgpu_err. (Zhenyu) v7. rebase to staging branch v8. rebase to fix branch Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-02-23drm/i915/gvt: decrease priority of output msg for untracked mmioZhao, Xinda
When untracked mmio is visited, too many log info will be printed out, it may confuse the user, but most of the time, it is not the urgent case, so use gvt_dbg_mmio() instead. Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-02-17drm/i915/gvt: handle fence reg access during GPU resetZhao, Xinda
Lots of reduntant log info will be printed out during GPU reset, including accessing untracked mmio register and fence register, variable disable_warn_untrack is added previously to handle the situation, but the accessing of fence register is ignored in the previously patch, so add it back. Besides, set the variable disable_warn_untrack to the defalut value after GPU reset is finished. Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-02-17drm/i915/gvt: introduced failsafe mode into vgpuMin He
New failsafe mode is introduced, when we detect guest not supporting GVT-g. In failsafe mode, we will ignore all the MMIO and cfg space read/write from guest. This patch can fix the issue that when guest kernel or graphics driver version is too low, there will be a lot of kernel traces in host. V5: rebased onto latest gvt-staging V4: changed coding style by Zhenyu and Ping's advice V3: modified coding style and error messages according to Zhenyu's comment V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified function to enter failsafe mode Signed-off-by: Min He <min.he@intel.com> Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-13drm/i915/gvt: introduce intel_vgpu_reset_mmio() to reset mmio spaceChangbin Du
This patch introduces a new function intel_vgpu_reset_mmio() to reset vGPU MMIO space (virtual registers of the vGPU). The default values are loaded as firmware during gvt inititiation. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-13drm/i915/gvt: move mmio init/clean function to mmio.cChangbin Du
Move the mmio space inititation function setup_vgpu_mmio() and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated source file mmio.c, and rename them as intel_vgpu_init_mmio() and intel_vgpu_clean_mmio() respectively. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: print correct value for untracked mmioPei Zhang
In function intel_vgpu_emulate_mmio_read, the untracked mmio register is dumped through kernel log, but the register value is not correct. This patch fixes this issue. V2: fix the fromat warning from checkpatch.pl. Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-11-10drm/i915/gvt: refactor intel_gvt_io_emulation_ops to be intel_gvt_opsJike Song
There are currently 4 methods in intel_gvt_io_emulation_ops to emulate CFG/MMIO reading/writing for intel vGPU. A possibly better scope is: add 3 more methods for vgpu create/destroy/reset respectively, and rename the ops to 'intel_gvt_ops', then pass it to the MPT module (say the future kvmgt) to use: they are all methods for external usage. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: clean up intel_gvt.h as interface for i915 coreZhenyu Wang
i915 core should only call functions and structures exposed through intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h. Change for internal intel_gvt structure as private handler which not requires to expose gvt internal structure for i915 core. v2: Fix per Chris's comment - carefully handle dev_priv->gvt assignment - add necessary bracket for macro helper - forward declartion struct intel_gvt - keep free operation within same file handling alloc v3: fix use after free and remove intel_gvt.initialized v4: change to_gvt() to an inline Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU MMIO virtualizationZhi Wang
This patch introduces the generic vGPU MMIO emulation intercept framework. The MPT modules will request GVT-g core logic to emulate MMIO read/write through IO emulation operations callback when hypervisor trapped a guest GTTMMIO read/write. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>