Merge tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.11

This introduces 11 new boards, namely:
* ASUS Vivobook S 15
* Lenovo Smart Tab M10 DTS
* Motorola Moto E 2015 LTE (surnia)
* Motorola Moto G 2015 (osprey)
* Motorola Moto G4 Play (harpia)
* Qualcomm AIM300 AIoT development board
* Qualcomm SM8650 Hardware Development Kit (HDK)
* SHIFTphone 8
* Samsung Galaxy Z Fold5
* Schneider HMIBSC board DTS
* TP-Link Archer AX55 v1

Of particular interest here is the Asus Vivobook, the first supported X1
Elite consumer laptop.

For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
described.

The improvements to MSM8916-based devices continues, with sound and
mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
definitions, NFC support and MUIC. Accelerometer and magnetometer
support is added to the Samsung Galaxy Grand Prime devices.

On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
and Adreno GPU are added.

On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
added for the audio DSP, glink-edges are described where available, the
display subsystem reset is added.

Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
allow ath10k to come up.

GPU support is added to QCM2290 and enabled on the RB1 development
board.
The I2C controller used for communicating with the LT9611UXC HDMI
bridge is temporarily replaced with i2c-gpio while issues with the
builtin controller is diagnosed. The same is done for RB2, on the
QRB4210 platform.
On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
marked as always on to match expectations.

On the QDU1000 platform, USB is added, secure QFPROM is introduced to
allow LLCC to access OTP data. USB is enabled on the two IDP boards.

SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
info regions. Nodes are marked as dma-coherent as needed, a dedicated
carveout for shared memory bridge allocations is introduced.
The SA8775P ride device is split in the two versions r2 and r3.

The SC7180 Trogdor clamshell/detachable fragments are refactored for
convenience, and pwmleds are disabled where unused.

On SC7280 the APR nodes for interfacing with the audio services in audio
DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
enable improved debug support. QoS clocks are added to interconnects, as
needed in order to operate the QoS settings on some buses.
SuperSpeed in park is disabled for the primary DWC3 instance to address
host controller issues under load.

The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
named for better output, and firmware name for IPA is adjusted to the
preferred file format.
The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
enabled.

The Type-C port manager found in PM7250b is enabled, for targets not
using pmic-glink firmware for Type-C management.

SC8180X gets a number of smaller corrections, and some cleanups -
related to both functional issues and DeviceTree validation.

The PSHOLD node is marked reserved, after reports that this causes
issues during shutdown. Description of the USB signals are updated to
match the signal path. The PM8008 camera PMIC is added to Lenovo
ThinkPad X13s.

The PM660 PMIC is extended with charger and rradc definitions, and the
SDM670 gains a SMEM region definition.

On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
debug output during faults etc. The UFS PHY is associated with its GDSC,
and the DisplayPort controller is wired up to the QMP PHY.

The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
and Type-C port management and altmode support. The C630 also gains WiFI
calibration variant information, to cause selection of the right data.
The missing IPA firmware path is corrected.

For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
SPI nodes are introduced. SD-card support is added to the IDP board.

CPUfreq support is introduced for the SM4450 platform.

Missing reset is added to the SDHC controller of SM6115. The UFS PHY
is associated with its GDSC, so is the PHY on SM6350.

On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
named for more informative debug output, and USB role switching is
enabled.

On the Fairphone 3, vibrator support is added and enabled.

On SM8250, the USB signal paths are properly described in the OF graph,
the UFS PHY gains its required power-domains description.
Thanks to the introduction of PCI power sequence support, the QRB5165
RB5 WiFi chip can now be powered up, so this is added.

Touchscreen interrupt flags are corrected accross a number of Sony
Xperia devices, to remove the unexpected traces from downstream.

On SM8450 an OPP-table is introduced for the PCIe controllers, to
specify the bandwidth and performance state requirements for the
different genrations and link widths. For this the PCIe controllers also
gains interconnect path definitions. The LLCC register layout is
corrected, and the UFS PHY is associated with its GDSC.

On the SM8550 development boards speaker port mapping is added. WiFi
support is finally enabled on the QRD board.
The new AIM300 development platform/board is introduced.

For SM8650 video and camera clock controller are introduced. SCM node
gains details necessary to trigger USB ramdump (download mode) upon a
system crash.
WiFi support and speaker port mapping is added to the QRD and the newly
introduced HDK. On the MTP the USB Type-C connector is describe to be
routed to the PHY.
In addition to the base HDK, a Display Card overlay is also introduced.

For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
6a instance are added. Thermal zones are described. Pmic-glink is
introduced for both CRD and QCP devices, and remaining PMICs are
described. Audio support is also added to the QCP.
An explicit, larger, chunk of CMA memory is added to the various
devices, in order to compensate for the lack of IOMMU for PCIe.

Across a wide range of platforms, the thermal zone polling delays are
removed as supplies are interrupt driven anyways. Also thermal related
is the introduction of GPU thermal throttling, across many SoCs.

The old SMSM implementation is finally transitioned to using the
mailbox-based description and implementation for invoking interrupts on
remote processors. As such interrupt-triggering is converted to use this
mechanism on related platforms.

The usb-role-switch property is removed for all USB instances hard coded
to either host or peripheral across a range of boards.

* tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits)
  dt-bindings: arm: qcom: Document samsung,ms013g
  arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
  dt-bindings: arm: qcom: Add ASUS Vivobook S 15
  arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS
  arm64: dts: qcom: msm8998: add venus node
  arm64: dts: qcom: sa8775p-ride-r3: add new board file
  arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
  dt-bindings: arm: qcom: add sa8775p-ride Rev 3
  arm64: dts: qcom: sm8550-qrd: add port mapping to speakers
  arm64: dts: qcom: sm8550-mtp: add port mapping to speakers
  arm64: dts: qcom: sm8550-hdk: add port mapping to speakers
  arm64: dts: qcom: sm8650-qrd: add port mapping to speakers
  arm64: dts: qcom: sm8650-mtp: add port mapping to speakers
  arm64: dts: qcom: sm8650-hdk: add port mapping to speakers
  arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators
  arm64: dts: qcom: pm8916: correct thermal zone name
  arm64: dts: qcom: x1e80100: Add gpu support
  arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply
  arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
  arm64: dts: qcom: sm6115: add resets for sdhc_1
  ...

Link: https://lore.kernel.org/r/20240706173140.18887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 250 insertions, 0 deletions

diff --git a/include/dt-bindings/clock/qcom,qcm2290-gpucc.h b/include/dt-bindings/clock/qcom,qcm2290-gpucc.h
new file mode 100644
index 000000000000..7c76dd05278f
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,qcm2290-gpucc.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_QCM2290_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_QCM2290_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK			0
+#define GPU_CC_CRC_AHB_CLK		1
+#define GPU_CC_CX_GFX3D_CLK		2
+#define GPU_CC_CX_GMU_CLK		3
+#define GPU_CC_CX_SNOC_DVM_CLK		4
+#define GPU_CC_CXO_AON_CLK		5
+#define GPU_CC_CXO_CLK			6
+#define GPU_CC_GMU_CLK_SRC		7
+#define GPU_CC_GX_GFX3D_CLK		8
+#define GPU_CC_GX_GFX3D_CLK_SRC		9
+#define GPU_CC_PLL0			10
+#define GPU_CC_SLEEP_CLK		11
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK	12
+
+/* Resets */
+#define GPU_GX_BCR			0
+
+/* GDSCs */
+#define GPU_CX_GDSC			0
+#define GPU_GX_GDSC			1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,sm8650-camcc.h b/include/dt-bindings/clock/qcom,sm8650-camcc.h
new file mode 100644
index 000000000000..df73bf35f4bf
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8650-camcc.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8650_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK					0
+#define CAM_CC_BPS_CLK						1
+#define CAM_CC_BPS_CLK_SRC					2
+#define CAM_CC_BPS_FAST_AHB_CLK					3
+#define CAM_CC_BPS_SHIFT_CLK					4
+#define CAM_CC_CAMNOC_AXI_NRT_CLK				5
+#define CAM_CC_CAMNOC_AXI_RT_CLK				6
+#define CAM_CC_CAMNOC_AXI_RT_CLK_SRC				7
+#define CAM_CC_CAMNOC_DCD_XO_CLK				8
+#define CAM_CC_CAMNOC_XO_CLK					9
+#define CAM_CC_CCI_0_CLK					10
+#define CAM_CC_CCI_0_CLK_SRC					11
+#define CAM_CC_CCI_1_CLK					12
+#define CAM_CC_CCI_1_CLK_SRC					13
+#define CAM_CC_CCI_2_CLK					14
+#define CAM_CC_CCI_2_CLK_SRC					15
+#define CAM_CC_CORE_AHB_CLK					16
+#define CAM_CC_CPAS_AHB_CLK					17
+#define CAM_CC_CPAS_BPS_CLK					18
+#define CAM_CC_CPAS_CRE_CLK					19
+#define CAM_CC_CPAS_FAST_AHB_CLK				20
+#define CAM_CC_CPAS_IFE_0_CLK					21
+#define CAM_CC_CPAS_IFE_1_CLK					22
+#define CAM_CC_CPAS_IFE_2_CLK					23
+#define CAM_CC_CPAS_IFE_LITE_CLK				24
+#define CAM_CC_CPAS_IPE_NPS_CLK					25
+#define CAM_CC_CPAS_SBI_CLK					26
+#define CAM_CC_CPAS_SFE_0_CLK					27
+#define CAM_CC_CPAS_SFE_1_CLK					28
+#define CAM_CC_CPAS_SFE_2_CLK					29
+#define CAM_CC_CPHY_RX_CLK_SRC					30
+#define CAM_CC_CRE_AHB_CLK					31
+#define CAM_CC_CRE_CLK						32
+#define CAM_CC_CRE_CLK_SRC					33
+#define CAM_CC_CSI0PHYTIMER_CLK					34
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC				35
+#define CAM_CC_CSI1PHYTIMER_CLK					36
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC				37
+#define CAM_CC_CSI2PHYTIMER_CLK					38
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC				39
+#define CAM_CC_CSI3PHYTIMER_CLK					40
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC				41
+#define CAM_CC_CSI4PHYTIMER_CLK					42
+#define CAM_CC_CSI4PHYTIMER_CLK_SRC				43
+#define CAM_CC_CSI5PHYTIMER_CLK					44
+#define CAM_CC_CSI5PHYTIMER_CLK_SRC				45
+#define CAM_CC_CSI6PHYTIMER_CLK					46
+#define CAM_CC_CSI6PHYTIMER_CLK_SRC				47
+#define CAM_CC_CSI7PHYTIMER_CLK					48
+#define CAM_CC_CSI7PHYTIMER_CLK_SRC				49
+#define CAM_CC_CSID_CLK						50
+#define CAM_CC_CSID_CLK_SRC					51
+#define CAM_CC_CSID_CSIPHY_RX_CLK				52
+#define CAM_CC_CSIPHY0_CLK					53
+#define CAM_CC_CSIPHY1_CLK					54
+#define CAM_CC_CSIPHY2_CLK					55
+#define CAM_CC_CSIPHY3_CLK					56
+#define CAM_CC_CSIPHY4_CLK					57
+#define CAM_CC_CSIPHY5_CLK					58
+#define CAM_CC_CSIPHY6_CLK					59
+#define CAM_CC_CSIPHY7_CLK					60
+#define CAM_CC_DRV_AHB_CLK					61
+#define CAM_CC_DRV_XO_CLK					62
+#define CAM_CC_FAST_AHB_CLK_SRC					63
+#define CAM_CC_GDSC_CLK						64
+#define CAM_CC_ICP_AHB_CLK					65
+#define CAM_CC_ICP_CLK						66
+#define CAM_CC_ICP_CLK_SRC					67
+#define CAM_CC_IFE_0_CLK					68
+#define CAM_CC_IFE_0_CLK_SRC					69
+#define CAM_CC_IFE_0_FAST_AHB_CLK				70
+#define CAM_CC_IFE_0_SHIFT_CLK					71
+#define CAM_CC_IFE_1_CLK					72
+#define CAM_CC_IFE_1_CLK_SRC					73
+#define CAM_CC_IFE_1_FAST_AHB_CLK				74
+#define CAM_CC_IFE_1_SHIFT_CLK					75
+#define CAM_CC_IFE_2_CLK					76
+#define CAM_CC_IFE_2_CLK_SRC					77
+#define CAM_CC_IFE_2_FAST_AHB_CLK				78
+#define CAM_CC_IFE_2_SHIFT_CLK					79
+#define CAM_CC_IFE_LITE_AHB_CLK					80
+#define CAM_CC_IFE_LITE_CLK					81
+#define CAM_CC_IFE_LITE_CLK_SRC					82
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK				83
+#define CAM_CC_IFE_LITE_CSID_CLK				84
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC				85
+#define CAM_CC_IPE_NPS_AHB_CLK					86
+#define CAM_CC_IPE_NPS_CLK					87
+#define CAM_CC_IPE_NPS_CLK_SRC					88
+#define CAM_CC_IPE_NPS_FAST_AHB_CLK				89
+#define CAM_CC_IPE_PPS_CLK					90
+#define CAM_CC_IPE_PPS_FAST_AHB_CLK				91
+#define CAM_CC_IPE_SHIFT_CLK					92
+#define CAM_CC_JPEG_1_CLK					93
+#define CAM_CC_JPEG_CLK						94
+#define CAM_CC_JPEG_CLK_SRC					95
+#define CAM_CC_MCLK0_CLK					96
+#define CAM_CC_MCLK0_CLK_SRC					97
+#define CAM_CC_MCLK1_CLK					98
+#define CAM_CC_MCLK1_CLK_SRC					99
+#define CAM_CC_MCLK2_CLK					100
+#define CAM_CC_MCLK2_CLK_SRC					101
+#define CAM_CC_MCLK3_CLK					102
+#define CAM_CC_MCLK3_CLK_SRC					103
+#define CAM_CC_MCLK4_CLK					104
+#define CAM_CC_MCLK4_CLK_SRC					105
+#define CAM_CC_MCLK5_CLK					106
+#define CAM_CC_MCLK5_CLK_SRC					107
+#define CAM_CC_MCLK6_CLK					108
+#define CAM_CC_MCLK6_CLK_SRC					109
+#define CAM_CC_MCLK7_CLK					110
+#define CAM_CC_MCLK7_CLK_SRC					111
+#define CAM_CC_PLL0						112
+#define CAM_CC_PLL0_OUT_EVEN					113
+#define CAM_CC_PLL0_OUT_ODD					114
+#define CAM_CC_PLL1						115
+#define CAM_CC_PLL1_OUT_EVEN					116
+#define CAM_CC_PLL2						117
+#define CAM_CC_PLL3						118
+#define CAM_CC_PLL3_OUT_EVEN					119
+#define CAM_CC_PLL4						120
+#define CAM_CC_PLL4_OUT_EVEN					121
+#define CAM_CC_PLL5						122
+#define CAM_CC_PLL5_OUT_EVEN					123
+#define CAM_CC_PLL6						124
+#define CAM_CC_PLL6_OUT_EVEN					125
+#define CAM_CC_PLL7						126
+#define CAM_CC_PLL7_OUT_EVEN					127
+#define CAM_CC_PLL8						128
+#define CAM_CC_PLL8_OUT_EVEN					129
+#define CAM_CC_PLL9						130
+#define CAM_CC_PLL9_OUT_EVEN					131
+#define CAM_CC_PLL9_OUT_ODD					132
+#define CAM_CC_PLL10						133
+#define CAM_CC_PLL10_OUT_EVEN					134
+#define CAM_CC_QDSS_DEBUG_CLK					135
+#define CAM_CC_QDSS_DEBUG_CLK_SRC				136
+#define CAM_CC_QDSS_DEBUG_XO_CLK				137
+#define CAM_CC_SBI_CLK						138
+#define CAM_CC_SBI_FAST_AHB_CLK					139
+#define CAM_CC_SBI_SHIFT_CLK					140
+#define CAM_CC_SFE_0_CLK					141
+#define CAM_CC_SFE_0_CLK_SRC					142
+#define CAM_CC_SFE_0_FAST_AHB_CLK				143
+#define CAM_CC_SFE_0_SHIFT_CLK					144
+#define CAM_CC_SFE_1_CLK					145
+#define CAM_CC_SFE_1_CLK_SRC					146
+#define CAM_CC_SFE_1_FAST_AHB_CLK				147
+#define CAM_CC_SFE_1_SHIFT_CLK					148
+#define CAM_CC_SFE_2_CLK					149
+#define CAM_CC_SFE_2_CLK_SRC					150
+#define CAM_CC_SFE_2_FAST_AHB_CLK				151
+#define CAM_CC_SFE_2_SHIFT_CLK					152
+#define CAM_CC_SLEEP_CLK					153
+#define CAM_CC_SLEEP_CLK_SRC					154
+#define CAM_CC_SLOW_AHB_CLK_SRC					155
+#define CAM_CC_TITAN_TOP_SHIFT_CLK				156
+#define CAM_CC_XO_CLK_SRC					157
+
+/* CAM_CC power domains */
+#define CAM_CC_TITAN_TOP_GDSC					0
+#define CAM_CC_BPS_GDSC						1
+#define CAM_CC_IFE_0_GDSC					2
+#define CAM_CC_IFE_1_GDSC					3
+#define CAM_CC_IFE_2_GDSC					4
+#define CAM_CC_IPE_0_GDSC					5
+#define CAM_CC_SBI_GDSC						6
+#define CAM_CC_SFE_0_GDSC					7
+#define CAM_CC_SFE_1_GDSC					8
+#define CAM_CC_SFE_2_GDSC					9
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR						0
+#define CAM_CC_DRV_BCR						1
+#define CAM_CC_ICP_BCR						2
+#define CAM_CC_IFE_0_BCR					3
+#define CAM_CC_IFE_1_BCR					4
+#define CAM_CC_IFE_2_BCR					5
+#define CAM_CC_IPE_0_BCR					6
+#define CAM_CC_QDSS_DEBUG_BCR					7
+#define CAM_CC_SBI_BCR						8
+#define CAM_CC_SFE_0_BCR					9
+#define CAM_CC_SFE_1_BCR					10
+#define CAM_CC_SFE_2_BCR					11
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,sm8650-videocc.h b/include/dt-bindings/clock/qcom,sm8650-videocc.h
new file mode 100644
index 000000000000..4e3c2d87280f
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8650-videocc.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8650_H
+
+#include "qcom,sm8450-videocc.h"
+
+/* SM8650 introduces below new clocks and resets compared to SM8450 */
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_SHIFT_CLK					12
+#define VIDEO_CC_MVS0C_SHIFT_CLK				13
+#define VIDEO_CC_MVS1_SHIFT_CLK					14
+#define VIDEO_CC_MVS1C_SHIFT_CLK				15
+#define VIDEO_CC_XO_CLK_SRC					16
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_XO_CLK_ARES					7
+
+#endif