| Age | Commit message (Collapse) | Author |
|---|
|
Calling rcutree_report_cpu_starting() early during boot can lead to
livelocks with the generic CPU hotplug mechanism if the boot CPU blocks
on an RCU grace period while the CPU being onlined is spinning in
cpuhp_ap_sync_alive().
In preparation for enabling the generic CPU hotplug code on arm64, split
up the trace_hardirqs_off() call during secondary CPU bringup so that we
update lockdep early but defer the tracing updates until after the new
CPU has been registered with RCU, which itself is deferred until after
the early CPU compatibility checks, allowing us to drop the explicit
call to rcutree_report_cpu_dead() entirely.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Populating the 'cpuinfo_arm64' structure during CPU bringup and
subsequently checking/updating cpufeature structures is slightly
convoluted and differs unnecessarily between the boot CPU and secondary
CPUs.
Rework the code so that cpuinfo_store_cpu() is used to populate the
'cpuinfo_arm64' structure for each CPU, with secondary CPUs then calling
update_cpu_features() to update the global view of the available
features. This allows us to internalise init_cpu_features() and the
'boot_cpu_data' in cpufeature.c and paves the way for parallelising the
ID register probing during bring-up of secondary CPUs.
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
smp_prepare_cpus() is always run on the boot CPU (i.e. CPU 0) but goes
to great lengths to support running on a CPU where smp_processor_id()
is non-zero.
Clean up the code a little by hardcoding zero for the boot CPU ID.
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
sort_ftr_regs() sorts nothing. It checks that arm64_ftr_regs[] is in
sys_id order, which the binary search in get_arm64_ftr_reg() relies on,
and that no register's fields overlap. It runs at the top of
init_cpu_features(), after the boot CPU's __cpuinfo_store_cpu(). A
subsequent patch makes __cpuinfo_store_cpu() look registers up in the
table.
Rename it validate_ftr_regs() and call it from smp_prepare_boot_cpu(),
ahead of cpuinfo_store_boot_cpu().
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* for-next/sdei:
arm64: escalate smp_send_stop() to an SDEI NMI as a last resort
drivers/firmware: add SDEI cross-CPU NMI service for arm64
firmware: arm_sdei: add SDEI_EVENT_SIGNAL support
firmware: arm_sdei: add sdei_is_present()
|
|
Sashiko reported that during CPU offlining, __cpu_disable() is
executed by the stopper thread via take_cpu_down() with local
interrupts disabled. __cpu_disable() calls ipi_teardown(), which
invokes ipi_lpi_disable(). For the GICv5 flow, this eventually calls
the sleepable disable_irq().
This can be reproduced easily with CONFIG_DEBUG_ATOMIC_SLEEP=y by
offlining a CPU:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:702
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 20, name: migration/1
preempt_count: 1, expected: 0
no locks held by migration/1/20.
irq event stamp: 186
hardirqs last enabled at (185): [<ffff800080b084c8>] _raw_spin_unlock_irq+0x38/0x68
hardirqs last disabled at (186): [<ffff8000801f8e08>] multi_cpu_stop+0xc8/0x190
softirqs last enabled at (80): [<ffff8000800c48b8>] handle_softirqs+0x410/0x468
softirqs last disabled at (75): [<ffff8000800102f4>] __do_softirq+0x1c/0x28
Fix this by using disable_irq_nosync() instead, which is safe in this
atomic context.
Fixes: ba1004f861d1 ("arm64: smp: Support non-SGIs for IPIs")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A CPU wedged with interrupts masked ignores the stop IPI, and without
pseudo-NMI there is no NMI IPI to escalate to: a reboot proceeds with
the CPU still running, and a kdump misses its registers.
Add a third rung to smp_send_stop(): once the IPI (and pseudo-NMI IPI,
if enabled) rungs have run, signal SDEI event 0 at whatever stayed
online. Firmware delivers it regardless of the target's DAIF, so it
reaches a CPU a plain IPI cannot; the target acks by going offline,
which the caller already polls for.
Fold the stop bookkeeping into one arm64_nmi_cpu_stop(regs,
die_on_crash), shared by the stop IPI handlers, panic_smp_self_stop()
and the SDEI handler, replacing the near-duplicate local_cpu_stop() and
ipi_cpu_crash_stop(). @die_on_crash is the only difference: the IPI
handlers pass true and PSCI CPU_OFF the CPU on a crash stop so a capture
kernel can reclaim it; the SDEI handler and self-stop pass false and
park. The SDEI park is required, not conservative -- its handler runs
inside an SDEI event that is never completed (completing it resumes the
wedged context), and a CPU_OFF from that unfinished-event context wedges
EL3 on some firmware (left as a follow-up). The dump is unaffected; only
re-onlining the CPU in an SMP capture kernel is lost.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Deliver an NMI-like event to an interrupt-masked arm64 CPU via the
standard SDEI software-signalled event (event 0), without the pseudo-NMI
hot-path cost: register a handler for event 0 and poke a target with
sdei_event_signal(0, mpidr).
First user is arch_trigger_cpumask_backtrace() (sysrq-l, RCU stalls,
hung-task/soft-lockup dumps), which otherwise rides an IPI that can't
reach a masked CPU. Falls back to the IPI path when SDEI is absent; no
watchdog backend yet, so the stock detector is untouched.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: stable@vger.kernel.org
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#gic-cpu-interface-gicc-structure
Fixes: eed4583bcf9a ("arm64: Kconfig: Enable HOTPLUG_SMT")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sashiko review pointed out the following issue[1].
Commit eba4675008a6 ("arm64: arch_register_cpu() variant to check if
an ACPI handle is now available.") introduced architectural safety
blocks inside arch_unregister_cpu(). If a hot-unplug operation is
determined to be a physical hardware removal (where _STA evaluates to
!ACPI_STA_DEVICE_PRESENT), or if firmware evaluation fails, it aborts
the unregistration transaction early to protect unreadied arm64
infrastructure.
However, returning early from arch_unregister_cpu() causes a catastrophic
state tearing because the generic ACPI layer (acpi_processor_post_eject())
unconditionally continues its cleanup flow. This leaves the stale sysfs
device leaked in the memory, deadlocking any subsequent hot-add attempts
on the same CPU.
Fix it by simplifying arch_unregister_cpu() to always proceed with
the unregistration, as a pr_err_once() warning is sufficient to make
it more visible for currently not supported physical CPU removal.
Also remove the redundant NULL check on acpi_handle as it cannot be
NULL when calling arch_unregister_cpu().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260520022023.126670-1-ruanjinjie@huawei.com [1]
Fixes: eba4675008a6 ("arm64: arch_register_cpu() variant to check if an ACPI handle is now available.")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
|
|
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
|
|
Under nosmp (maxcpus=0), arm64 never brings up secondary CPUs.
smp_prepare_cpus() already treats this as a UP-mandated boot and returns
before marking secondary CPUs present. However, smp_init_cpus() may still
enumerate firmware-described secondary CPUs and mark them possible before
that point.
Avoid marking secondary CPUs possible when nosmp/maxcpus=0 is in effect,
so that cpu_possible_mask reflects the nosmp boot policy for this boot.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
This patch corrects several minor typographical and spelling errors
in comments across multiple arm64 source files.
No functional changes.
Signed-off-by: mrigendrachaubey <mrigendra.chaubey@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Continue spreading the notion of affinity to the per CPU interrupt request
code by updating the call sites that use request_percpu_nmi() (all two of
them) to take an affinity pointer. This pointer is firmly NULL for now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-16-maz@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
Breno reports that pNMIs are not behaving the way they should since
they were reworked for GICv5. Turns out we feed the IRQ number to
the pNMI helper instead of the IPI number -- not a good idea.
Fix it by providing the correct number (duh).
Fixes: ba1004f861d16 ("arm64: smp: Support non-SGIs for IPIs")
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
An IRS supports Logical Peripheral Interrupts (LPIs) and implement
Linux IPIs on top of it.
LPIs are used for interrupt signals that are translated by a
GICv5 ITS (Interrupt Translation Service) but also for software
generated IRQs - namely interrupts that are not driven by a HW
signal, ie IPIs.
LPIs rely on memory storage for interrupt routing and state.
LPIs state and routing information is kept in the Interrupt
State Table (IST).
IRSes provide support for 1- or 2-level IST tables configured
to support a maximum number of interrupts that depend on the
OS configuration and the HW capabilities.
On systems that provide 2-level IST support, always allow
the maximum number of LPIs; On systems with only 1-level
support, limit the number of LPIs to 2^12 to prevent
wasting memory (presumably a system that supports a 1-level
only IST is not expecting a large number of interrupts).
On a 2-level IST system, L2 entries are allocated on
demand.
The IST table memory is allocated using the kmalloc() interface;
the allocation required may be smaller than a page and must be
made up of contiguous physical pages if larger than a page.
On systems where the IRS is not cache-coherent with the CPUs,
cache mainteinance operations are executed to clean and
invalidate the allocated memory to the point of coherency
making it visible to the IRS components.
On GICv5 systems, IPIs are implemented using LPIs.
Add an LPI IRQ domain and implement an IPI-specific IRQ domain created
as a child/subdomain of the LPI domain to allocate the required number
of LPIs needed to implement the IPIs.
IPIs are backed by LPIs, add LPIs allocation/de-allocation
functions.
The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs.
Associate an IPI irqchip with IPI IRQ descriptors to provide
core code with the irqchip.ipi_send_single() method required
to raise an IPI.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The arm64 arch has relied so far on GIC architectural software
generated interrupt (SGIs) to handle IPIs. Those are per-cpu
software generated interrupts.
arm64 architecture code that allocates the IPIs virtual IRQs and
IRQ descriptors was written accordingly.
On GICv5 systems, IPIs are implemented using LPIs that are not
per-cpu interrupts - they are just normal routable IRQs.
Add arch code to set-up IPIs on systems where they are handled
using normal routable IRQs.
For those systems, force the IRQ affinity (and make it immutable)
to the cpu a given IRQ was assigned to.
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
[lpieralisi: changed affinity set-up, log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-18-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For really large values of CONFIG_NR_CPUS, a CPU mask value should
not be put on the stack:
arch/arm64/kernel/smp.c:1188:1: error: the frame size of 8544 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This could be achieved using alloc_cpumask_var(), which makes it
depend on CONFIG_CPUMASK_OFFSTACK, but as this function is already
serialized and can only run on one CPU, making the variable 'static'
is easier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250620111045.3364827-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
When testing hard lockup handling on my sc7180-trogdor-lazor device
with pseudo-NMI enabled, with serial console enabled and with kgdb
disabled, I found that the stack crawls printed to the serial console
ended up as a jumbled mess. After rebooting, the pstore-based console
looked fine though. Also, enabling kgdb to trap the panic made the
console look fine and avoided the mess.
After a bit of tracking down, I came to the conclusion that this was
what was happening:
1. The panic path was stopping all other CPUs with
panic_other_cpus_shutdown().
2. At least one of those other CPUs was in the middle of printing to
the serial console and holding the console port's lock, which is
grabbed with "irqsave". ...but since we were stopping with an NMI
we didn't care about the "irqsave" and interrupted anyway.
3. Since we stopped the CPU while it was holding the lock it would
never release it.
4. All future calls to output to the console would end up failing to
get the lock in qcom_geni_serial_console_write(). This isn't
_totally_ unexpected at panic time but it's a code path that's not
well tested, hard to get right, and apparently doesn't work
terribly well on the Qualcomm geni serial driver.
The Qualcomm geni serial driver was fixed to be a bit better in commit
9e957a155005 ("serial: qcom-geni: Don't cancel/abort if we can't get
the port lock") but it's nice not to get into this situation in the
first place.
Taking a page from what x86 appears to do in native_stop_other_cpus(),
do this:
1. First, try to stop other CPUs with a normal IPI and wait a second.
This gives them a chance to leave critical sections.
2. If CPUs fail to stop then retry with an NMI, but give a much lower
timeout since there's no good reason for a CPU not to react quickly
to a NMI.
This works well and avoids the corrupted console and (presumably)
could help avoid other similar issues.
In order to do this, we need to do a little re-organization of our
IPIs since we don't have any more free IDs. Do what was suggested in
previous conversations and combine "stop" and "crash stop". That frees
up an IPI so now we can have a "stop" and "stop NMI".
In order to do this we also need a slight change in the way we keep
track of which CPUs still need to be stopped. We need to know
specifically which CPUs haven't stopped yet when we fall back to NMI
but in the "crash stop" case the "cpu_online_mask" isn't updated as
CPUs go down. This is why that code path had an atomic of the number
of CPUs left. Solve this by also updating the "cpu_online_mask" for
crash stops.
All of the above lets us combine the logic for "stop" and "crash stop"
code, which appeared to have a bunch of arbitrary implementation
differences.
Aside from the above change where we try a normal IPI and then an NMI,
the combined function has a few subtle differences:
* In the normal smp_send_stop(), if we fail to stop one or more CPUs
then we won't include the current CPU (the one running
smp_send_stop()) in the error message.
* In crash_smp_send_stop(), if we fail to stop some CPUs we'll print
the CPUs that we failed to stop instead of printing all _but_ the
current running CPU.
* In crash_smp_send_stop(), we will now only print "SMP: stopping
secondary CPUs" if (system_state <= SYSTEM_RUNNING).
Fixes: d7402513c935 ("arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240821145353.v3.1.Id4817adef610302554b8aa42b090d57270dc119c@changeid
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, kasan_init_sw_tags() is called before setup_per_cpu_areas(),
so per_cpu(prng_state, cpu) accesses the same address regardless of the
value of "cpu", and the same seed value gets copied to the percpu area
for every CPU. Fix this by moving the call to smp_prepare_boot_cpu(),
which is the first architecture hook after setup_per_cpu_areas().
Fixes: 3c9e3aa11094 ("kasan: add tag related helper functions")
Fixes: 3f41b6093823 ("kasan: fix random seed generation for tag-based mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20240814091005.969756-1-samuel.holland@sifive.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
|
|
commit 83cfac95c018 ("genirq: Allow interrupts to be excluded from
/proc/interrupts") is to avoid IPIs appear twice in /proc/interrupts.
But the commit 331a1b3a836c ("arm64: smp: Add arch support for backtrace
using pseudo-NMI") and commit 2f5cd0c7ffde("arm64: kgdb: Implement
kgdb_roundup_cpus() to enable pseudo-NMI roundup") set CPU_BACKTRACE and
KGDB_ROUNDUP IPIs "IRQ_HIDDEN" flag but not show them in
arch_show_interrupts(), which cause the interrupt kstat_irqs accounting
is missing in display.
Before this patch, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are missing:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 466 600 309 332 GICv3 27 Level arch_timer
13: 24 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 3 3 3 3 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 7 14 9 26 Rescheduling interrupts
IPI1: 354 93 233 255 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 0 IRQ work interrupts
Err: 0
After this pacth, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are displayed:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 393 281 532 449 GICv3 27 Level arch_timer
13: 15 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 2 2 2 2 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 11 19 4 23 Rescheduling interrupts
IPI1: 279 347 222 72 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 1 IRQ work interrupts
IPI6: 0 0 0 0 CPU backtrace interrupts
IPI7: 0 0 0 0 KGDB roundup interrupts
Err: 0
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240620063600.573559-1-ruanjinjie@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ARM64 architecture does not support physical CPU HP today.
To avoid any possibility of a bug against such an architecture if defined
in future, check for the physical CPU HP case (not present) and
return an error on any such attempt.
On ARM64 virtual CPU Hotplug relies on the status value that can be
queried via the AML method _STA for the CPU object.
There are two conditions in which the CPU can be registered.
1) ACPI disabled.
2) ACPI enabled and the acpi_handle is available.
_STA evaluates to the CPU is both enabled and present.
(Note that in absence of the _STA method they are always in this
state).
If neither of these conditions is met the CPU is not 'yet' ready
to be used and -EPROBE_DEFER is returned.
Success occurs in the early attempt to register the CPUs if we
are booting with DT (no concept yet of vCPU HP) if not it succeeds
for already enabled CPUs when the ACPI Processor driver attaches to
them. Finally it may succeed via the CPU Hotplug code indicating that
the CPU is now enabled.
For ACPI if CONFIG_ACPI_PROCESSOR the only path to get to
arch_register_cpu() with that handle set is via
acpi_processor_hot_add_init() which is only called from an ACPI bus
scan in which _STA has already been queried there is no need to
repeat it here. Add a comment to remind us of this in the future.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-17-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When a CPU is marked as disabled, but online capable in the MADT, PSCI
applies some firmware policy to control when it can be brought online.
PSCI returns DENIED to a CPU_ON request if this is not currently
permitted. The OS can learn the current policy from the _STA enabled bit.
Handle the PSCI DENIED return code gracefully instead of printing an
error.
Note the alternatives to the PSCI cpu_boot() callback do not
return -EPERM so the change in smp.c has no affect.
See https://developer.arm.com/documentation/den0022/f/?lang=en page 58.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
[ morse: Rewrote commit message ]
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-16-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To support virtual CPU hotplug, ACPI has added an 'online capable' bit
to the MADT GICC entries. This indicates a disabled CPU entry may not
be possible to online via PSCI until firmware has set enabled bit in
_STA.
This means that a "usable" GIC redistributor is one that is marked as
either enabled, or online capable. The meaning of the
acpi_gicc_is_usable() would become less clear than just checking the
pair of flags at call sites. As such, drop that helper function.
The test in gic_acpi_match_gicc() remains as testing just the
enabled bit so the count of enabled distributors is correct.
What about the redistributor in the GICC entry? ACPI doesn't want to say.
Assume the worst: When a redistributor is described in the GICC entry,
but the entry is marked as disabled at boot, assume the redistributor
is inaccessible.
The GICv3 driver doesn't support late online of redistributors, so this
means the corresponding CPU can't be brought online either.
Rather than modifying cpu masks that may already have been used,
register a new cpuhp callback to fail this case. This must run earlier
than the main gic_starting_cpu() so that this case can be rejected
before the section of cpuhp that runs on the CPU that is coming up as
that is not allowed to fail. This solution keeps the handling of this
broken firmware corner case local to the GIC driver. As precise ordering
of this callback doesn't need to be controlled as long as it is
in that initial prepare phase, use CPUHP_BP_PREPARE_DYN.
Systems that want CPU hotplug in a VM can ensure their redistributors
are always-on, and describe them that way with a GICR entry in the MADT.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Historically, arm64 implemented raw_smp_processor_id() as a read of
current_thread_info()->cpu. This changed when arm64 moved thread_info into
task struct, as at the time CONFIG_THREAD_INFO_IN_TASK made core code use
thread_struct::cpu for the cpu number, and due to header dependencies
prevented using this in raw_smp_processor_id(). As a workaround, we moved to
using a percpu variable in commit:
57c82954e77fa12c ("arm64: make cpu number a percpu variable")
Since then, thread_info::cpu was reintroduced, and core code was made to use
this in commits:
001430c1910df65a ("arm64: add CPU field to struct thread_info")
bcf9033e5449bdca ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y")
Consequently it is possible to use current_thread_info()->cpu again.
This decreases the number of emitted instructions like in the following
example:
Dump of assembler code for function bpf_get_smp_processor_id:
0xffff8000802cd608 <+0>: nop
0xffff8000802cd60c <+4>: nop
0xffff8000802cd610 <+8>: adrp x0, 0xffff800082138000
0xffff8000802cd614 <+12>: mrs x1, tpidr_el1
0xffff8000802cd618 <+16>: add x0, x0, #0x8
0xffff8000802cd61c <+20>: ldrsw x0, [x0, x1]
0xffff8000802cd620 <+24>: ret
After this patch:
Dump of assembler code for function bpf_get_smp_processor_id:
0xffff8000802c9130 <+0>: nop
0xffff8000802c9134 <+4>: nop
0xffff8000802c9138 <+8>: mrs x0, sp_el0
0xffff8000802c913c <+12>: ldr w0, [x0, #24]
0xffff8000802c9140 <+16>: ret
A microbenchmark[1] was built to measure the performance improvement
provided by this change. It calls the following function given number of
times and finds the runtime overhead:
static noinline int get_cpu_id(void)
{
return smp_processor_id();
}
Run the benchmark like:
modprobe smp_processor_id nr_function_calls=1000000000
+--------------------------+------------------------+
| | Number of Calls | Time taken |
+--------+-----------------+------------------------+
| Before | 1000000000 | 1602888401ns |
+--------+-----------------+------------------------+
| After | 1000000000 | 1206212658ns |
+--------+-----------------+------------------------+
| Difference (decrease) | 396675743ns (24.74%) |
+---------------------------------------------------+
Remove the percpu variable cpu_number as it is used only in
set_smp_ipi_range() as a dummy variable to be passed to ipi_handler().
Use irq_stat in place of cpu_number here like arm32.
[1] https://github.com/puranjaymohan/linux/commit/77d3fdd
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240503171847.68267-2-puranjay@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For historical reasons we unmask debug exceptions in __cpu_setup(), but
it's not necessary to unmask debug exceptions this early in the
boot/idle entry paths. It would be better to unmask debug exceptions
later in C code as this simplifies the current code and will make it
easier to rework exception masking logic to handle non-DAIF bits in
future (e.g. PSTATE.{ALLINT,PM}).
We started clearing DAIF.D in __cpu_setup() in commit:
2ce39ad15182604b ("arm64: debug: unmask PSTATE.D earlier")
At the time, we needed to ensure that DAIF.D was clear on the primary
CPU before scheduling and preemption were possible, and chose to do this
in __cpu_setup() so that this occurred in the same place for primary and
secondary CPUs. As we cannot handle debug exceptions this early, we
placed an ISB between initializing MDSCR_EL1 and clearing DAIF.D so that
no exceptions should be triggered.
Subsequently we rewrote the return-from-{idle,suspend} paths to use
__cpu_setup() in commit:
cabe1c81ea5be983 ("arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va")
... which allowed for earlier use of the MMU and had the desirable
property of using the same code to reset the CPU in the cold and warm
boot paths. This introduced a bug: DAIF.D was clear while
cpu_do_resume() restored MDSCR_EL1 and other control registers (e.g.
breakpoint/watchpoint control/value registers), and so we could
unexpectedly take debug exceptions.
We fixed that in commit:
744c6c37cc18705d ("arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1")
... by having cpu_do_resume() use the `disable_dbg` macro to set DAIF.D
before restoring MDSCR_EL1 and other control registers. This relies on
DAIF.D being subsequently cleared again in cpu_resume().
Subsequently we reworked DAIF masking in commit:
0fbeb318754860b3 ("arm64: explicitly mask all exceptions")
... where we began enforcing a policy that DAIF.D being set implies all
other DAIF bits are set, and so e.g. we cannot take an IRQ while DAIF.D
is set. As part of this the use of `disable_dbg` in cpu_resume() was
replaced with `disable_daif` for consistency with the rest of the
kernel.
These days, there's no need to clear DAIF.D early within __cpu_setup():
* setup_arch() clears DAIF.DA before scheduling and preemption are
possible on the primary CPU, avoiding the problem we we originally
trying to work around.
Note: DAIF.IF get cleared later when interrupts are enabled for the
first time.
* secondary_start_kernel() clears all DAIF bits before scheduling and
preemption are possible on secondary CPUs.
Note: with pseudo-NMI, the PMR is initialized here before any DAIF
bits are cleared. Similar will be necessary for the architectural NMI.
* cpu_suspend() restores all DAIF bits when returning from idle,
ensuring that we don't unexpectedly leave DAIF.D clear or set.
Note: with pseudo-NMI, the PMR is initialized here before DAIF is
cleared. Similar will be necessary for the architectural NMI.
This patch removes the unmasking of debug exceptions from __cpu_setup(),
relying on the above locations to initialize DAIF. This allows some
other cleanups:
* It is no longer necessary for cpu_resume() to explicitly mask debug
(or other) exceptions, as it is always called with all DAIF bits set.
Thus we drop the use of `disable_daif`.
* The `enable_dbg` macro is no longer used, and so is dropped.
* It is no longer necessary to have an ISB immediately after
initializing MDSCR_EL1 in __cpu_setup(), and we can revert to relying
on the context synchronization that occurs when the MMU is enabled
between __cpu_setup() and code which clears DAIF.D
Comments are added to setup_arch() and secondary_start_kernel() to
explain the initial unmasking of the DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240422113523.4070414-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the detection+enablement of boot cpucaps is separate from the
patching of boot cpucap alternatives, which means there's a period where
cpus_have_cap($CAP) and alternative_has_cap($CAP) may be mismatched.
It would be preferable to manage the boot cpucaps in the same way as the
system cpucaps, both for clarity and to minimize the risk of accidental
usage of code relying upon an alternative which has not yet been
patched.
This patch aligns the handling of boot cpucaps with the handling of
system cpucaps:
* The existing setup_boot_cpu_capabilities() function is moved to be
closer to the setup_system_capabilities() and setup_system_features()
functions so that they're more clearly related and more likely to be
updated together in future.
* The patching of boot cpucap alternatives is moved into
setup_boot_cpu_capabilities(), immediately after boot cpucaps are
detected and enabled.
* A new setup_boot_cpu_features() function is added to mirror
setup_system_features(); this handles initialization of cpucap data
structures and calls setup_boot_cpu_capabilities(). This makes
init_cpu_features() a closer mirror to update_cpu_features(), and
makes smp_prepare_boot_cpu() a closer mirror to smp_cpus_done().
Importantly, while these changes alter the structure of the code, they
retain the existing order of calls to:
init_cpu_features(); // prefix initializing feature regs
init_cpucap_indirect_list();
detect_system_supports_pseudo_nmi();
update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
enable_cpu_capabilities(SCOPE_BOOT_CPU);
apply_boot_alternatives();
... and hence there should be no functional change as a result of this
patch; this is purely a structural cleanup.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231212170910.3745497-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Recent changes to remove cpus_have_const_cap() introduced new users of
cpus_have_cap() in the period between detecting system cpucaps and
patching alternatives. It would be preferable to defer these until after
the relevant cpucaps have been patched so that these can use the usual
feature check helper functions, which is clearer and has less risk of
accidental usage of code relying upon an alternative which has not yet
been patched.
This patch reworks the system-wide cpucap detection and patching to
minimize this transient period:
* The detection, enablement, and patching of system cpucaps is moved
into a new setup_system_capabilities() function so that these can be
grouped together more clearly, with no other functions called in the
period between detection and patching. This is called from
setup_system_features() before the subsequent checks that depend on
the cpucaps.
The logging of TTBR0 PAN and cpucaps with a mask is also moved here to
keep these as close as possible to update_cpu_capabilities().
At the same time, comments are corrected and improved to make the
intent clearer.
* As hyp_mode_check() only tests system register values (not hwcaps) and
must be called prior to patching, the call to hyp_mode_check() is
moved before the call to setup_system_features().
* In setup_system_features(), the use of system_uses_ttbr0_pan() is
restored, now that this occurs after alternatives are patched. This is
a partial revert of commit:
53d62e995d9eaed1 ("arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN")
* In sve_setup() and sme_setup(), the use of system_supports_sve() and
system_supports_sme() respectively are restored, now that these occur
after alternatives are patched. This is a partial revert of commit:
a76521d160284a1e ("arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231212170910.3745497-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
This reverts commit a07a594152173a3dd3bdd12fc7d73dbba54cdbca.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
* for-next/cpus_have_const_cap: (38 commits)
: cpus_have_const_cap() removal
arm64: Remove cpus_have_const_cap()
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_REPEAT_TLBI
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_CAVIUM_23154
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_2645198
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1742098
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1542419
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_843419
arm64: Avoid cpus_have_const_cap() for ARM64_UNMAP_KERNEL_AT_EL0
arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}
arm64: Avoid cpus_have_const_cap() for ARM64_SPECTRE_V2
arm64: Avoid cpus_have_const_cap() for ARM64_SSBS
arm64: Avoid cpus_have_const_cap() for ARM64_MTE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_TLB_RANGE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_WFXT
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_RNG
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_EPAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_DIT
...
|
|
'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
|
|
ACPI, irqchip and the architecture code all inspect the MADT
enabled bit for a GICC entry in the MADT.
The addition of an 'online capable' bit means all these sites need
updating.
Move the current checks behind a helper to make future updates easier.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/E1quv5D-00AeNJ-U8@rmk-PC.armlinux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently setup_cpu_features() handles a mixture of one-time kernel
feature setup (e.g. cpucaps) and one-time user feature setup (e.g. ELF
hwcaps). Subsequent patches will rework other one-time setup and expand
the logic currently in setup_cpu_features(), and in preparation for this
it would be helpful to split the kernel and user setup into separate
functions.
This patch splits setup_user_features() out of setup_cpu_features(),
with a few additional cleanups of note:
* setup_cpu_features() is renamed to setup_system_features() to make it
clear that it handles system-wide feature setup rather than cpu-local
feature setup.
* setup_system_capabilities() is folded into setup_system_features().
* Presence of TTBR0 pan is logged immediately after
update_cpu_capabilities(), so that this is guaranteed to appear
alongside all the other detected system cpucaps.
* The 'cwg' variable is removed as its value is only consumed once and
it's simpler to use cache_type_cwg() directly without assigning its
return value to a variable.
* The call to setup_user_features() is moved after alternatives are
patched, which will allow user feature setup code to depend on
alternative branches and allow for simplifications in subsequent
patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In commit 2b2d0a7a96ab ("arm64: smp: Remove dedicated wakeup IPI") we
started using a scheduler IPI to avoid a dedicated reschedule. When we
did this, we used arch_smp_send_reschedule() directly rather than
calling smp_send_reschedule(). The only difference is that calling
arch_smp_send_reschedule() directly avoids tracing. Presumably we
_don't_ want to avoid tracing here, so switch to
smp_send_reschedule().
Fixes: 2b2d0a7a96ab ("arm64: smp: Remove dedicated wakeup IPI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Some MediaTek devices have broken firmware which corrupts some GICR
registers behind the back of the OS, and pseudo-NMIs cannot be used on
these devices. For more details see commit:
44bd78dd2b8897f5 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
We did not take this problem into account in commit:
331a1b3a836c0f38 ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Since that commit arm64's SMP code will try to setup some IPIs as
pseudo-NMIs, even on systems with broken FW. The GICv3 code will
(rightly) reject attempts to request interrupts as pseudo-NMIs,
resulting in boot-time failures.
Avoid the problem by taking the broken FW into account when deciding to
request IPIs as pseudo-NMIs. The GICv3 driver maintains a static_key
named "supports_pseudo_nmis" which is false on systems with broken FW,
and we can consult this within ipi_should_be_nmi().
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Closes: https://issuetracker.google.com/issues/197061987#comment68
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
rcu_report_dead() and rcutree_migrate_callbacks() have their headers in
rcupdate.h while those are pure rcutree calls, like the other CPU-hotplug
functions.
Also rcu_cpu_starting() and rcu_report_dead() have different naming
conventions while they mirror each other's effects.
Fix the headers and propose a naming that relates both functions and
aligns with the prefix of other rcutree CPU-hotplug functions.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
rcu_report_dead() has to be called locally by the CPU that is going to
exit the RCU state machine. Passing a cpu argument here is error-prone
and leaves the possibility for a racy remote call.
Use local access instead.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Mark the three IPI-related globals in smp.c as "__ro_after_init" since
they are only ever set in set_smp_ipi_range(), which is marked
"__init". This is a better and more secure marking than the old
"__read_mostly".
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230906090246.v13.7.I625d393afd71e1766ef73d3bfaac0b347a4afd19@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Up until now we've been using the generic (weak) implementation for
kgdb_roundup_cpus() when using kgdb on arm64. Let's move to a custom
one. The advantage here is that, when pseudo-NMI is enabled on a
device, we'll be able to round up CPUs using pseudo-NMI. This allows
us to debug CPUs that are stuck with interrupts disabled. If
pseudo-NMIs are not enabled then we'll fallback to just using an IPI,
which is still slightly better than the generic implementation since
it avoids the potential situation described in the generic
kgdb_call_nmi_hook().
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230906090246.v13.6.I2ef26d1b3bfbed2d10a281942b0da7d9854de05e@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There's no reason why IPI_CPU_STOP and IPI_CPU_CRASH_STOP can't be
handled as NMI. They are very simple and everything in them is
NMI-safe. Mark them as things to use NMI for if NMI is available.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Misono Tomohiro <misono.tomohiro@fujitsu.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230906090246.v13.5.Ifadbfd45b22c52edcb499034dd4783d096343260@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Enable arch_trigger_cpumask_backtrace() support on arm64. This enables
things much like they are enabled on arm32 (including some of the
funky logic around NR_IPI, nr_ipi, and MAX_IPI) but with the
difference that, unlike arm32, we'll try to enable the backtrace to
use pseudo-NMI.
NOTE: this patch is a squash of the little bit of code adding the
ability to mark an IPI to try to use pseudo-NMI plus the little bit of
code to hook things up for kgdb. This approach was decided upon in the
discussion of v9 [1].
This patch depends on commit 8d539b84f1e3 ("nmi_backtrace: allow
excluding an arbitrary CPU") since that commit changed the prototype
of arch_trigger_cpumask_backtrace(), which this patch implements.
[1] https://lore.kernel.org/r/ZORY51mF4alI41G1@FVFF77S0Q05N
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Misono Tomohiro <misono.tomohiro@fujitsu.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230906090246.v13.4.Ie6c132b96ebbbcddbf6954b9469ed40a6960343c@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable NMI backtrace and KGDB's NMI cpu roundup, we need to free up
at least one dedicated IPI.
On arm64 the IPI_WAKEUP IPI is only used for the ACPI parking protocol,
which itself is only used on some very early ARMv8 systems which
couldn't implement PSCI.
Remove the IPI_WAKEUP IPI, and rely on the IPI_RESCHEDULE IPI to wake
CPUs from the parked state. This will cause a tiny amonut of redundant
work to check the thread flags, but this is miniscule in relation to the
cost of taking and handling the IPI in the first place. We can safely
handle redundant IPI_RESCHEDULE IPIs, so there should be no functional
impact as a result of this change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230906090246.v13.3.I7209db47ef8ec151d3de61f59005bbc59fe8f113@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.
Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
