| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
# Conflicts:
# Documentation/devicetree/bindings/phy/qcom,x1e80100-csi2-phy.yaml
|
|
Add support for the PCI-Express Gen4 S-PHY found in the latest
MediaTek SoCs, including MT6991, MT8196, MT8894 and variants.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260915101022.23852-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
USB2 PHY port sub-nodes may carry an optional phys property referencing
an external eUSB2 repeater.
Fetch the repeater during probe using devm_of_phy_optional_get(),
initialize and exit it alongside the USB2 PHY, and propagate USB mode
changes to it.
This follows the same pattern used by the Synopsys eUSB2 PHY driver.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260826-mtk-usb2-repeater-usb2-v1-2-e8e48e2fd6d8@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On mobile SoCs, the USB PHY is completely powered off during bootup.
As a result, various bits in the DTM0 register are set that prevent
the USB 2.0 PHY from functioning. Clear them as part of the
initialization sequence.
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260711-mt6858-xsphy-poweron-v1-1-dee2fb71c7d5@jolla.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Recent changes in driver added unused variables causing build warnings:
drivers/phy/mediatek/phy-mtk-dp.c: In function ‘mtk_dp_phy_set_digital_drv_params’:
drivers/phy/mediatek/phy-mtk-dp.c:332:16: error: unused variable ‘ret’ [-Werror=unused-variable]
332 | int i, ret;
| ^~~
drivers/phy/mediatek/phy-mtk-dp.c: In function ‘mtk_dp_phy_init’:
drivers/phy/mediatek/phy-mtk-dp.c:348:24: error: unused variable ‘dev’ [-Werror=unused-variable]
348 | struct device *dev = &phy->dev;
| ^~~
drivers/phy/mediatek/phy-mtk-dp.c: In function ‘mtk_dp_phy_disable_all_lanes’:
drivers/phy/mediatek/phy-mtk-dp.c:457:13: error: unused variable ‘ret’ [-Werror=unused-variable]
457 | int ret;
| ^~~
Drop these to fix these
Link: https://patch.msgid.link/20260913105445.211613-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Building arm/arm64/i386 allmodconfig with clang fails:
drivers/phy/mediatek/phy-mtk-dp.c:761:18: error: incompatible pointer
to integer conversion initializing 'u16' (aka 'unsigned short') with
an expression of type 'const u16[4]' [-Wint-conversion]
drivers/phy/mediatek/phy-mtk-dp.c:761:18: error: initializer element
is not a compile-time constant
drivers/phy/mediatek/phy-mtk-dp.c:761:18: error: suggest braces around
initialization of subobject [-Werror,-Wmissing-braces]
14 errors in total, one set per offending member.
off_ana_lane, off_dig_lane and driving_params are declared as arrays in
struct mtk_dp_phy_pdata:
u16 off_ana_lane[MTK_DP_PHY_MAX_LANES];
u16 off_dig_lane[MTK_DP_PHY_MAX_LANES];
u32 driving_params[PHYD_DIG_NUM_DRV_PARA_REGS];
but the SoC data instances initialize them with compound literals. A
compound literal is an object, not an initializer list, so this is not
an array initializer: the member is initialized element-wise from a
scalar, the first element gets the address of the literal truncated to
u16/u32, and the remaining elements are zeroed. Hence the three
diagnostics above - the pointer-to-integer conversion, the address not
being a compile-time constant, and the missing braces.
Arrays are the right type here, since both members are indexed per lane
and driving_params is sized with ARRAY_SIZE(), so drop the casts and use
plain braced initializers.
Found by KernelCI builds of the linus-next tree.
Fixes: ae859204b519 ("phy: phy-mtk-dp: Migrate register offsets to SoC specific pdata")
Fixes: 7cf38eb0ab59 ("phy: phy-mtk-dp: Add support for digital and analog calibration")
Fixes: 6fe4d5beac72 ("phy: phy-mtk-dp: Add support for MT8196 eDP PHY")
Assisted-by: LLM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260913172930.1150324-1-sashal@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The MT8196 SoC features an updated PHY IP compared to the older
ones, and there is one that is specific to Embedded DisplayPort.
Add support for the eDP PHY found in the MediaTek MT8196 SoC and
all of its variants.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-13-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for adding support for the eDP PHY found in newer
SoCs, transfer the register mask for PHYD_TX_LN_EN to SoC specific
data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260910092038.48291-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for adding support for the eDP PHY found in newer
SoCs, transfer the bitrate register value definitions to SoC
specific data.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use FIELD_PREP_CONST and add nicer definitions/macros to build the
default driving parameters for the PHY and, while at it, also add
comments explaining what they are supposed to set in the PHY.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for reading the calibration values from eFuse: if
present, write those - otherwise, rely on the defaults from
SoC-specific data.
This also adds support for writing the calibration values for
the analog part of the PHY.
Note that before this change, only default hardcoded calibration
values were supported for the digital driving parameters.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260910092038.48291-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for honoring the set_voltages request to set the
voltage swing and preemphasis values in the .configure() callback.
For proper hardware cleanup, reset both in the .reset() callback.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for enabling a specifically requested number of lanes
in the .configure() callback and disable all lanes in power off
and reset callbacks for proper hardware cleanup.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260910092038.48291-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add .power_on() and .power_off() callbacks to mtk_dp_phy_dev_ops
to be able to call those with phy_power_on() and phy_power_off()
API in the DisplayPort driver to be able to stop using all of
those hardcoded register writes in that external driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260910092038.48291-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for adding support for newer SoCs and for adding
more capabilities to this driver in an efficient manner, migrate
all of the hardcoded register offsets to SoC specific pdata and
assign that for both DT and platform probing.
While at it also cleanup writing the driving parameters to the PHY
by iterating through all lanes with a loop instead: note that for
that to happen the default 0/1/2 driving parameters were added,
those are really just zero.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make it possible to decouple the registration of the DisplayPort
PHY driver from the DisplayPort IP driver by adding a devicetree
match to probe the PHY, registering an OF PHY provider and this
device's own MMIO regmap - if, and only if, this PHY driver was
registered with an OF match.
In order to retain compatibility with older devicetrees that are
not declaring the DisplayPort PHY as a separate node, the legacy
code was moved in a `mtk_dp_phy_legacy_probe()` function, which
gets called if the driver was registered by the DisplayPort one.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to perform further cleanups and to extend the
driver to support more SoCs, rename the `regs` member to `regmap`
to improve readability, as this is a common name across many
kernel drivers for a struct regmap.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260910092038.48291-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The comment in the mtk_phy_tmds_clk_ratio() function clearly and
correctly explains that the TMDS ratio has to be 1/10 for data
rates under 3.4Gbps, and 1/40 over that.
Unfortunately though, the TXC_DIV register setting was wrong, as
in value 3 means to divide by 8 and, in order to achieve the in
spec 1/40 (tmds) data rate, this has to divide by 4 instead!
Add definitions for the TXC_DIV register values clearly explaining
the meanings (DIV2, DIV4, DIV8), and program the correct, DIV 4,
value to the register in mtk_phy_tmds_clk_ratio().
This fixes out of spec clocking and, with this change, SoCs using
the MT8195 class HDMI PHYs can now successfully be configured to
output 3840x2160@60Hz over HDMI.
Fixes: 45810d486bb4 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260911074015.9994-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When trying to calculate a PLL rate for target display resolutions
above 2560x1440, 24bpp, 30Hz, the pixel clock value will be more
than 32-bits long but the division to finally calculate the digital
clock divider is being done with div_u64(), which expects a 32bit
unsigned divisor.
Fix the overflow by using div64_u64() instead.
Fixes: 9d9ff3d2a4a5 ("phy: mediatek: hdmi: mt8195: fix wrong pll calculus")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260911074015.9994-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual bunch of new device and driver support and updates to
existing drivers and addition of Manivannan to help with reviews.
New Support:
- Mediatek MT8196 DSI PHY support
- Renesas RZ/G3L usb2 support
- Qualcomm SM8475 QMP USB PHY and PCIe phy, IPQ9650 QMP PCIe PHY,
QUSB2 Phy for Shikra SoC, Hawi support for QMP PCIe phy and UFS
PHY. Glymur QMP PCIe Multi-PHY driver and multiple link-mode
support, ipq5210 PCIe phy support
- Spacemit USB3/PCIe comb PHY driver
Updates:
- Samsung hdptx driver improvements for modernizing the register
access and code cleanup
- Qualcomm drop duplicate v8 DP headers, improved runtime handling
for qmp drivers
- Rockchip clock lane phase tuning and 2500 Mbps support and TMDS
rate handling
- Freescale imx8mq improvements for runtime pm, pd handling"
* tag 'phy-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (76 commits)
MAINTAINERS: Add Manivannan Sadhasivam as the Reviewer for Generic PHY Framework
phy: rockchip-samsung-dcphy: fix out-of-range max_register
phy: qcom: qmp-pcie: Add QMP PCIe Multi-PHY driver
dt-bindings: phy: qcom: Add Glymur QMP PCIe multiple link-mode PHY
phy: rockchip: samsung-hdptx: Consistently use bitfield macros
phy: rockchip: samsung-hdptx: Simplify GRF access with FIELD_PREP_WM16()
phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
phy: rockchip: samsung-hdptx: Consolidate consumer_put on error path
phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround
phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes
phy: rockchip: samsung-hdptx: Fix rate recalculation for 3.2GHz FRL
phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow
phy: rockchip: samsung-hdptx: Prevent divide-by-zero when computing clk rate
phy: rockchip: samsung-hdptx: Fix rate recalculation for high bpc
phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
phy: renesas: rcar-gen3-usb2: Ignore missing VBUS regulator
phy: qcom: qmp-pcie: Add support for SM8475 Gen3x1 PCIe0 port
phy: qcom: qmp-pcie: Add pcs_lane1 offset to V5 offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SM8475 QMP PHY
...
|
|
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
|
|
Add support for the MIPI DSI PHY found in the MediaTek MT8196 SoC
and its variants.
This PHY has a different register layout and provides support for
more hardware features compared to the previous generation.
This initial driver only adds support for basic functionality that
is necessary to drive MIPI DSI displays as a D-PHY.
Feature additions like lane-swap, DPHY/CPHY switching, dual-port,
and others, may be done in the future.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260713103805.23030-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Instead of kzalloc and kcalloc, we can use a flex array to reduce to a
single allocation.
Also added __counted_by() for extra possible analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20260304043420.14151-1-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
mtk_phy_pdata documentation does not use correct tag for struct, while at
it fix one of member wrongly documented.
Warning: drivers/phy/mediatek/phy-mtk-tphy.c:289 cannot understand function prototype: 'struct mtk_phy_pdata'
Warning: drivers/phy/mediatek/phy-mtk-tphy.c:296 struct member 'slew_ref_clock_mhz' not described in 'mtk_phy_pdata'
Link: https://patch.msgid.link/20260223071032.408425-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no function clk_bulk_prepare_disable. Refer instead to
clk_bulk_disable_unprepare, which is called in the function
defined just below.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20251230140601.93474-1-Julia.Lawall@inria.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-6-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-5-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-4-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-3-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-2-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While it's true that, generally, the T-PHY V3 does not support the
slew calibration process, some minor versions of it actually do,
moreover, some SoCs may not support this even though the version
of the PHY IP does.
The reference clock and rate coefficient parameters are used only
for slew calibration: move those to platform data, then document
and change the checks in hs_slew_rate_calibrate() to perform the
calibration only if:
- EYE value was not supplied (pre-calculated calibration); and
- Slew reference clock value is present (not zero); and
- Slew coefficient is present (not zero).
Moreover, change the probe function to always check if both the
slew reference clock and coefficient properties are present and,
if not, assign the value from platform data (which, as reminder,
if not added means that it's zero!), instead of checking the PHY
IP version.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623120315.109881-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As struct mtk_phy_pdata was almost fully documented, transfer
the comments into kerneldoc on top.
While at it, also rewrite the comments to both improve the writing
writing and the actual information in the documentation, and add a
description for the `version` member of the structure.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623120315.109881-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Patch from Sam Shih <sam.shih@mediatek.com> found in MediaTek SDK
released under GPL.
Get syscon and use it to set the PHY type.
Extend support to PCIe and SGMII mode in addition to USB2 and USB3.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-7-linux@fw-web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The use of (of|device)_property_read_bool() for non-boolean properties
is deprecated in favor of (of|device)_property_present() when testing
for property presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20241231163121.241543-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Lots of Qualcomm and Rockchip device support.
New Support:
- Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and
PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY
- Rockchip rk3576 combo phy support
Updates:
- Drop Shengyang for JH7110 maintainer
- Freescale hdmi register calculation optimization
- Rockchip pcie phy mutex and regmap updates"
* tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits)
dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY
phy: rockchip: phy-rockchip-typec: Fix Copyright description
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs
phy: qcom-qusb2: Add support for QCS615
dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
phy: core: Simplify API of_phy_simple_xlate() implementation
phy: sun4i-usb: Remove unused of_gpio.h
phy: HiSilicon: Don't use "proxy" headers
phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle()
phy: qualcomm: qmp-pcie: add support for SAR2130P
phy: qualcomm: qmp-pcie: define several new registers
phy: qualcomm: qmp-pcie: split PCS_LANE1 region
phy: qualcomm: qmp-combo: add support for SAR2130P
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible
phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation
phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found
phy: freescale: fsl-samsung-hdmi: Expand Integer divider range
phy: rockchip-naneng-combo: add rk3576 support
dt-bindings: phy: rockchip: add rk3576 compatible
...
|
|
use debgufs_{create_file,get}_aux_num() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-11-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver no longer builds when regulator support is unavailable:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_register_regulators':
phy-mtk-hdmi.c:(.text.unlikely+0x3e): undefined reference to `devm_regulator_register'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_is_enabled':
phy-mtk-hdmi-mt8195.c:(.text+0x326): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_disable':
phy-mtk-hdmi-mt8195.c:(.text+0x346): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_enable':
Fixes: 49393b2da1cd ("phy: mediatek: phy-mtk-hdmi: Register PHY provided regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241213083056.2596499-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
At least version 2 of the HDMI PHY, found in MediaTek MT8195 and
MT8188 SoCs, does provide hardware support to switch on/off the
HDMI 5V pins (which are also used for DDC), and this translates
to this being a fixed regulator.
Register this PHY-provided regulator so that it can be fed to the
hdmi-connector driver to manage the HDMI +5V PWR rail.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241120124143.132637-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-6-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-5-5b4d82582644@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add driver for MediaTek's XFI T-PHY which can be found in the MT7988
SoC. The XFI T-PHY is a 10 Gigabit/s Ethernet SerDes PHY with muxes on
the internal side to be used with either USXGMII PCS or LynxI PCS,
depending on the selected PHY interface mode.
The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
PHY_INTERFACE_MODE_* corresponding to the supported modes:
* USXGMII \
* 10GBase-R }- USXGMII PCS - XGDM \
* 5GBase-R / \
}- Ethernet MAC
* 2500Base-X \ /
* 1000Base-X }- LynxI PCS - GDM /
* Cisco SGMII (MAC side) /
I chose the name XFI T-PHY because names of functions dealing with the
phy in the vendor driver are prefixed "xfi_pextp_".
The register space used by the phy is called "pextp" in the vendor
sources, which could be read as "_P_CI _ex_press _T_-_P_hy", and that
is quite misleading as this phy isn't used for anything related to
PCIe, so I wanted to find a better name.
XFI is still somehow related (as in: you would find the relevant
places using grep in the vendor driver when looking for that) and the
term seemed to at least somehow be aligned with the function of that
phy: Dealing with (up to) 10 Gbit/s Ethernet serialized differential
signals.
In order to work-around a performance issue present on the first of
two XFI T-PHYs found in MT7988, special tuning is applied which can
be selected by adding the 'mediatek,usxgmii-performance-errata'
property to the device tree node, similar to how the vendor driver is
doing that too.
There is no documentation for most registers used for the
analog/tuning part, however, most of the registers have been partially
reverse-engineered from MediaTek's SDK implementation (see links, an
opaque sequence of 32-bit register writes) and descriptions for all
relevant digital registers and bits such as resets and muxes have been
supplied by MediaTek.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/dec96a1d9b82cdcda4a56453fd0b453d4cab4b85/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/8719c82634df7e8e984f1a608be3ba2f2d494fb4.1712625857.git.daniel@makrotopia.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is a new driver that supports the MIPI CSI CD-PHY version 0.5
The number of PHYs depend on the SoC.
Each PHY can support D-PHY only or CD-PHY configuration.
The driver supports only D-PHY mode, so CD-PHY
compatible PHY are configured in D-PHY mode.
[Julien Stephan: simplify driver model: one instance per phy vs
one instance for all phys]
Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
[Julien Stephan: refactor code]
Co-developed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240111101738.468916-1-jstephan@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75
USB3, X1E80100 USB3 support
- Mediatek MT8195 support
- Rockchip RK3128 usb2 support
- TI SGMII mode for J784S4
Updates:
- Qualcomm v7 register offsets updates
- Mediatek tphy support for force phy mode switch"
* tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits)
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
phy: ti: gmii-sel: Enable SGMII mode for J784S4
phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
phy: mediatek: tphy: add support force phy mode switch
dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
phy: phy-can-transceiver: insert space after include
phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY
phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
phy: qcom-qmp: qserdes-com: Add v7 register offsets
phy: qcom-qmp: pcs-usb: Add v7 register offsets
phy: qcom-qmp: pcs: Add v7 register offsets
phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
...
|
|
this is used to be compatible with old SoCs, such as mt8195, which shares
t-phy between usb3 and pcie controller, usually, it's default mode is pcie
rc mode, and could use force mode to switch into usb3 mode, because pericfg
layer doesn't provide mode switch, also no efuse or jumper can be used;
Currently, only support switch from default pcie mode to usb3;
Note: don't use this way on new SoCs, use pericfg layer's mode switch
instead (by perperty "mediatek,syscon-type").
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20231211025624.28991-2-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.
Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual a couple of new drivers, a bunch of new device support and
few updates to existing drivers
New Support:
- Starfive dphy rx, JH7110 usb and pcie support
- Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
- Qualcomm sa8775p PCIe support, M31 USB PHY driver
- Samsung Exynos850 usb support
Updates:
- Mediatek dsi driver clock updates
- Qualcomm sm8150 combo phy with reworking of qmp pcie driver
- Xilinx zynqmp runtime PM support"
* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
phy: exynos5-usbdrd: Add Exynos850 support
phy: exynos5-usbdrd: Add 26MHz ref clk support
phy: exynos5-usbdrd: Make it possible to pass custom phy ops
dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
phy: qcom-qmp-combo: fix clock probing
phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
phy: qcom-qmp-pcie: populate offsets configuration
phy: qcom-qmp-pcie: simplify clock handling
phy: qcom-qmp-pcie: keep offset tables sorted
phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
phy: qcom: Introduce M31 USB PHY driver
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: rockchip: inno-dsidphy: Add rv1126 support
dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
...
|
