summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc
AgeCommit message (Collapse)Author
39 hoursMerge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-02-26net: skb: free up one bit in tx_flagsWillem de Bruijn
The linked series wants to add skb tx completion timestamps. That needs a bit in skb_shared_info.tx_flags, but all are in use. A per-skb bit is only needed for features that are configured on a per packet basis. Per socket features can be read from sk->sk_tsflags. Per packet tsflags can be set in sendmsg using cmsg, but only those in SOF_TIMESTAMPING_TX_RECORD_MASK. Per packet tsflags can also be set without cmsg by sandwiching a send inbetween two setsockopts: val |= SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); write(fd, buf, sz); val &= ~SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); Changing a datapath test from skb_shinfo(skb)->tx_flags to skb->sk->sk_tsflags can change behavior in that case, as the tx_flags is written before the second setsockopt updates sk_tsflags. Therefore, only bits can be reclaimed that cannot be set by cmsg and are also highly unlikely to be used to target individual packets otherwise. Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This selects between clock and free running counter source for HW TX timestamps. It is probable that all packets of the same socket will always use the same source. Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20igc: Add launch time support to XDP ZCSong Yoong Siang
Enable Launch Time Control (LTC) support for XDP zero copy via XDP Tx metadata framework. This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata on Intel I225-LM Ethernet controller. Below are the test steps and result. Test 1: Send a single packet with the launch time set to 1 s in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 -L 1 2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 1 s in the future, the delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in printout of the xdp_hw_metadata application below. 0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP rx_hash: 0xE343384 with RSS type:0x1 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to User RX-time sec:0.0002 (183.103 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User RX-time sec:0.0001 (80.309 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x562ff5dc8880: ping-pong with csum=561c (want c7dd) csum_start=34 csum_offset=6 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW Launch-time sec:1.0000 (1000000.000 usec) 0x562ff5dc8880: complete tx idx=4 addr=4018 HW Launch-time: 1734578016467548904 (sec:1734578016.4675) delta to HW TX-complete-time sec:0.0000 (0.016 usec) HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675) delta to User TX-complete-time sec:0.0000 (32.546 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User TX-complete-time sec:0.9999 (999929.768 usec) HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW TX-complete-time sec:1.0000 (1000000.016 usec) 0x562ff5dc8880: complete rx idx=132 addr=84110 Test 2: Send 1000 packets with a 10 ms interval and the launch time set to 500 us in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo chrt -f 99 ./xdp_hw_metadata enp2s0 -l 500000 -L 1 > \ /dev/shm/result.log 2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 500 us in the future, the average delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in the analysis of /dev/shm/result.log below. The XDP launch time works correctly in sending 1000 packets continuously. Min delta: 0.005 us Avr delta: 0.016 us Max delta: 0.031 us Total packets forwarded: 1000 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-6-yoong.siang.song@intel.com
2025-02-20igc: Refactor empty frame insertion for launch time supportSong Yoong Siang
Refactor the code for inserting an empty frame into a new function igc_insert_empty_frame(). This change extracts the logic for inserting an empty packet from igc_xmit_frame_ring() into a separate function, allowing it to be reused in future implementations, such as the XDP zero copy transmit function. Remove the igc_desc_unused() checking in igc_init_tx_empty_descriptor() because the number of descriptors needed is guaranteed. Ensure that skb allocation and DMA mapping work for the empty frame, before proceeding to fill in igc_tx_buffer info, context descriptor, and data descriptor. Rate limit the error messages for skb allocation and DMA mapping failures. Update the comment to indicate that the 2 descriptors needed by the empty frame are already taken into consideration in igc_xmit_frame_ring(). Handle the case where the insertion of an empty frame fails and explain the reason behind this handling. Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-5-yoong.siang.song@intel.com
2025-02-18igc: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/baeaabb84aef1803dfae385f6e9614d6fc547667.1738746872.git.namcao@linutronix.de
2025-02-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.14-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11igc: Set buffer type for empty frames in igc_init_empty_frameSong Yoong Siang
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the igc_init_empty_frame function. This ensures that the buffer type is correctly identified and handled during Tx ring cleanup. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11igc: Fix HW RX timestamp when passed by ZC XDPZdenek Bouska
Fixes HW RX timestamp in the following scenario: - AF_PACKET socket with enabled HW RX timestamps is created - AF_XDP socket with enabled zero copy is created - frame is forwarded to the BPF program, where the timestamp should still be readable (extracted by igc_xdp_rx_timestamp(), kfunc behind bpf_xdp_metadata_rx_timestamp()) - the frame got XDP_PASS from BPF program, redirecting to the stack - AF_PACKET socket receives the frame with HW RX timestamp Moves the skb timestamp setting from igc_dispatch_skb_zc() to igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to igc_construct_skb(). This issue can also be reproduced by running: # tools/testing/selftests/bpf/xdp_hw_metadata enp1s0 When a frame with the wrong port 9092 (instead of 9091) is used: # echo -n xdp | nc -u -q1 192.168.10.9 9092 then the RX timestamp is missing and xdp_hw_metadata prints: skb hwtstamp is not found! With this fix or when copy mode is used: # tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0 then RX timestamp is found and xdp_hw_metadata prints: found skb hwtstamp = 1736509937.852786132 Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10igc: Avoid unnecessary link down event in XDP_SETUP_PROG processSong Yoong Siang
The igc_close()/igc_open() functions are too drastic for installing a new XDP prog because they cause undesirable link down event and device reset. To avoid delays in Ethernet traffic, improve the XDP_SETUP_PROG process by using the same sequence as igc_xdp_setup_pool(), which performs only the necessary steps, as follows: 1. stop the traffic and clean buffer 2. stop NAPI 3. install the XDP program 4. resume NAPI 5. allocate buffer and resume the traffic This patch has been tested using the 'ip link set xdpdrv' command to attach a simple XDP prog that always returns XDP_PASS. Before this patch, attaching xdp program will cause ptp4l to lose sync for few seconds, as shown in ptp4l log below: ptp4l[198.082]: rms 4 max 8 freq +906 +/- 2 delay 12 +/- 0 ptp4l[199.082]: rms 3 max 4 freq +906 +/- 3 delay 12 +/- 0 ptp4l[199.536]: port 1 (enp2s0): link down ptp4l[199.536]: port 1 (enp2s0): SLAVE to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED) ptp4l[199.600]: selected local clock 22abbc.fffe.bb1234 as best master ptp4l[199.600]: port 1 (enp2s0): assuming the grand master role ptp4l[199.600]: port 1 (enp2s0): master state recommended in slave only mode ptp4l[199.600]: port 1 (enp2s0): defaultDS.priority1 probably misconfigured ptp4l[202.266]: port 1 (enp2s0): link up ptp4l[202.300]: port 1 (enp2s0): FAULTY to LISTENING on INIT_COMPLETE ptp4l[205.558]: port 1 (enp2s0): new foreign master 44abbc.fffe.bb2144-1 ptp4l[207.558]: selected best master clock 44abbc.fffe.bb2144 ptp4l[207.559]: port 1 (enp2s0): LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[208.308]: port 1 (enp2s0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[208.933]: rms 742 max 1303 freq -195 +/- 682 delay 12 +/- 0 ptp4l[209.933]: rms 178 max 274 freq +387 +/- 243 delay 12 +/- 0 After this patch, attaching xdp program no longer cause ptp4l to lose sync, as shown in ptp4l log below: ptp4l[201.183]: rms 1 max 3 freq +959 +/- 1 delay 8 +/- 0 ptp4l[202.183]: rms 1 max 3 freq +961 +/- 2 delay 8 +/- 0 ptp4l[203.183]: rms 2 max 3 freq +958 +/- 2 delay 8 +/- 0 ptp4l[204.183]: rms 3 max 5 freq +961 +/- 3 delay 8 +/- 0 ptp4l[205.183]: rms 2 max 4 freq +964 +/- 3 delay 8 +/- 0 Besides, before this patch, attaching xdp program will causes flood ping to lose 10 packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 99990 received, +6 errors, 0.01% packet loss, time 34001ms rtt min/avg/max/mdev = 0.028/0.301/3104.360/13.838 ms, pipe 10, ipg/ewma 0.340/0.243 ms After this patch, attaching xdp program no longer cause flood ping to loss any packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 100000 received, 0% packet loss, time 32326ms rtt min/avg/max/mdev = 0.027/0.231/19.589/0.155 ms, pipe 2, ipg/ewma 0.323/0.322 ms On the other hand, this patch has been tested with tools/testing/selftests/ bpf/xdp_hw_metadata app to make sure AF_XDP zero-copy is working fine with XDP Tx and Rx metadata. Below is the result of last packet after received 10000 UDP packets with interval 1 ms: poll: 1 (0) skip=0 fail=0 redir=10000 xsk_ring_cons__peek: 1 0x55881c7ef7a8: rx_desc[9999]->addr=8f110 addr=8f110 comp_addr=8f110 EoP rx_hash: 0xFB9BB6A3 with RSS type:0x1 HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (43.280 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (31.664 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x55881c7ef7a8: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6 0x55881c7ef7a8: complete tx idx=9999 addr=f010 HW TX-complete-time: 1733923136269591637 (sec:1733923136.2696) delta to User TX-complete-time sec:0.0001 (108.571 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User TX-complete-time sec:0.0002 (217.726 usec) HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to HW TX-complete-time sec:0.0001 (120.771 usec) 0x55881c7ef7a8: complete rx idx=10127 addr=8f110 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igc: Link queues to NAPI instancesJoe Damato
Link queues to NAPI instances via netdev-genl API so that users can query this information with netlink. Handle a few cases in the driver: 1. Link/unlink the NAPIs when XDP is enabled/disabled 2. Handle IGC_FLAG_QUEUE_PAIRS enabled and disabled Example output when IGC_FLAG_QUEUE_PAIRS is enabled: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'}, {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'}, {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'tx'}, {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'}, {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}] Since IGC_FLAG_QUEUE_PAIRS is enabled, you'll note that the same NAPI ID is present for both rx and tx queues at the same index, for example index 0: {'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'}, To test IGC_FLAG_QUEUE_PAIRS disabled, a test system was booted using the grub command line option "maxcpus=2" to force igc_set_interrupt_capability to disable IGC_FLAG_QUEUE_PAIRS. Example output when IGC_FLAG_QUEUE_PAIRS is disabled: $ lscpu | grep "On-line CPU" On-line CPU(s) list: 0,2 $ ethtool -l enp86s0 | tail -5 Current hardware settings: RX: n/a TX: n/a Other: 1 Combined: 2 $ cat /proc/interrupts | grep enp 144: [...] enp86s0 145: [...] enp86s0-rx-0 146: [...] enp86s0-rx-1 147: [...] enp86s0-tx-0 148: [...] enp86s0-tx-1 1 "other" IRQ, and 2 IRQs for each of RX and Tx, so we expect netlink to report 4 IRQs with unique NAPI IDs: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 2}' [{'id': 8196, 'ifindex': 2, 'irq': 148}, {'id': 8195, 'ifindex': 2, 'irq': 147}, {'id': 8194, 'ifindex': 2, 'irq': 146}, {'id': 8193, 'ifindex': 2, 'irq': 145}] Now we examine which queues these NAPIs are associated with, expecting that since IGC_FLAG_QUEUE_PAIRS is disabled each RX and TX queue will have its own NAPI instance: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}] Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-15-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igc: Link IRQs to NAPI instancesJoe Damato
Link IRQs to NAPI instances via netdev-genl API so that users can query this information with netlink. Compare the output of /proc/interrupts (noting that IRQ 128 is the "other" IRQ which does not appear to have a NAPI instance): $ cat /proc/interrupts | grep enp86s0 | cut --delimiter=":" -f1 128 129 130 131 132 The output from netlink shows the mapping of NAPI IDs to IRQs (again noting that 128 is absent as it is the "other" IRQ): $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 2}' [{'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8196, 'ifindex': 2, 'irq': 132}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8195, 'ifindex': 2, 'irq': 131}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8194, 'ifindex': 2, 'irq': 130}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8193, 'ifindex': 2, 'irq': 129}] Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-14-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igc: Fix passing 0 to ERR_PTR in igc_xdp_run_prog()Yue Haibing
igc_xdp_run_prog() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in igc_clean_rx_irq(). Remove this error pointer handing instead use plain int return value to fix this smatch warnings: drivers/net/ethernet/intel/igc/igc_main.c:2533 igc_xdp_run_prog() warn: passing zero to 'ERR_PTR' Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igc: Allow hot-swapping XDP programSong Yoong Siang
Currently, the driver would always close and reopen the network interface when setting/removing the XDP program, regardless of the presence of XDP resources. This could cause unnecessary disruptions. To avoid this, introduces a check to determine if there is a need to close and reopen the interface, allowing for seamless hot-swapping of XDP programs. Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07igc: return early when failing to read EECD registerEn-Wei Wu
When booting with a dock connected, the igc driver may get stuck for ~40 seconds if PCIe link is lost during initialization. This happens because the driver access device after EECD register reads return all F's, indicating failed reads. Consequently, hw->hw_addr is set to NULL, which impacts subsequent rd32() reads. This leads to the driver hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr prevents retrieving the expected value. To address this, a validation check and a corresponding return value catch is added for the EECD register read result. If all F's are returned, indicating PCIe link loss, the driver will return -ENXIO immediately. This avoids the 40-second hang and significantly improves boot time when using a dock with an igc NIC. Log before the patch: [ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set. [ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13 [ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity Log after the patch: [ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity Fixes: ab4056126813 ("igc: Add NVM support") Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-06igc: Remove unused igc_read/write_pcie_cap_regDr. David Alan Gilbert
The last uses of igc_read_pcie_cap_reg() and igc_write_pcie_cap_reg() were removed in 2019 by commit 16ecd8d9af26 ("igc: Remove the obsolete workaround") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102174142.200700-4-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06igc: Remove unused igc_read/write_pci_cfg wrappersDr. David Alan Gilbert
igc_read_pci_cfg() and igc_write_pci_cfg were added in 2018 as part of commit 146740f9abc4 ("igc: Add support for PF") but have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102174142.200700-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06igc: Remove unused igc_acquire/release_nvmDr. David Alan Gilbert
igc_acquire_nvm() and igc_release_nvm() were added in 2018 as part of commit ab4056126813 ("igc: Add NVM support") but never used. Remove them. The igc_1225.c has it's own specific implementations. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102174142.200700-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13igc: remove autoneg parameter from igc_mac_infoVitaly Lifshits
Since the igc driver doesn't support forced speed configuration and its current related hardware doesn't support it either, there is no use of the mac.autoneg parameter. Moreover, in one case this usage might result in a NULL pointer dereference due to an uninitialized function pointer, phy.ops.force_speed_duplex. Therefore, remove this parameter from the igc code. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06igc: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-02igc: Unlock on error in igc_io_resume()Dan Carpenter
Call rtnl_unlock() on this error path, before returning. Fixes: bc23aa949aeb ("igc: Add pcie error handler support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-30igc: Move the MULTI GBT AN Control Register to _regs fileSasha Neftin
MULTI GBT AN Control Register is IEEE Standard Register 7.32 (not a mask). The right place should be in igc_reg.h file. In accordance with the registers naming convention added IGC_' prefix. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-30igc: Add Energy Efficient Ethernet abilitySasha Neftin
According to the IEEE standard report the EEE ability (registers 7.60 and 7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the kernel's 'ethtool_keee' structure and report EEE link modes. Example: ethtool --show-eee <device> Before: Advertised EEE link modes: Not reported Link partner advertised EEE link modes: Not reported After: Advertised EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-30igc: Get rid of spurious interruptsKurt Kanzenbach
When running the igc with XDP/ZC in busy polling mode with deferral of hard interrupts, interrupts still happen from time to time. That is caused by the igc task watchdog which triggers Rx interrupts periodically. That mechanism has been introduced to overcome skb/memory allocation failures [1]. So the Rx clean functions stop processing the Rx ring in case of such failure. The task watchdog triggers Rx interrupts periodically in the hope that memory became available in the mean time. The current behavior is undesirable for real time applications, because the driver induced Rx interrupts trigger also the softirq processing. However, all real time packets should be processed by the application which uses the busy polling method. Therefore, only trigger the Rx interrupts in case of real allocation failures. Introduce a new flag for signaling that condition. [1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436 Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-30igc: Add MQPRIO offload supportKurt Kanzenbach
Add support for offloading MQPRIO. The hardware has four priorities as well as four queues. Each queue must be a assigned with a unique priority. However, the priorities are only considered in TSN Tx mode. There are two TSN Tx modes. In case of MQPRIO the Qbv capability is not required. Therefore, use the legacy TSN Tx mode, which performs strict priority arbitration. Example for mqprio with hardware offload: |tc qdisc replace dev ${INTERFACE} handle 100 parent root mqprio num_tc 4 \ | map 0 0 0 0 0 1 2 3 0 0 0 0 0 0 0 0 \ | queues 1@0 1@1 1@2 1@3 \ | hw 1 The mqprio Qdisc also allows to configure the `preemptible_tcs'. However, frame preemption is not supported yet. Tested on Intel i225 and implemented by following data sheet section 7.5.2, Transmit Scheduling. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix qbv tx latency by setting gtxoffsetFaizal Rahim
A large tx latency issue was discovered during testing when only QBV was enabled. The issue occurs because gtxoffset was not set when QBV is active, it was only set when launch time is active. The patch "igc: Correct the launchtime offset" only sets gtxoffset when the launchtime_enable field is set by the user. Enabling launchtime_enable ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as LaunchT in the SW user manual). Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states: "The latency between transmission scheduling (launch time) and the time the packet is transmitted to the network is listed in Table 7-61." However, the patch misinterprets the phrase "launch time" in that section by assuming it specifically refers to the LaunchT register, whereas it actually denotes the generic term for when a packet is released from the internal buffer to the MAC transmit logic. This launch time, as per that section, also implicitly refers to the QBV gate open time, where a packet waits in the buffer for the QBV gate to open. Therefore, latency applies whenever QBV is in use. TSN features such as QBU and QAV reuse QBV, making the latency universal to TSN features. Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that the term "launch time" used in Section 7.5.2.6 is not clear and can be easily misinterpreted. Avi will update this section to: "When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission scheduling and the time the packet is transmitted to the network is listed in Table 7-61." Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to write to gtxoffset, aligning with the newly updated SW User Manual. Tested: 1. Enrol taprio on talker board base-time 0 cycle-time 1000000 flags 0x2 index 0 cmd S gatemask 0x1 interval1 index 0 cmd S gatemask 0x1 interval2 Note: interval1 = interval for a 64 bytes packet to go through interval2 = cycle-time - interval1 2. Take tcpdump on listener board 3. Use udp tai app on talker to send packets to listener 4. Check the timestamp on listener via wireshark Test Result: 100 Mbps: 113 ~193 ns 1000 Mbps: 52 ~ 84 ns 2500 Mbps: 95 ~ 223 ns Note that the test result is similar to the patch "igc: Correct the launchtime offset". Fixes: 790835fcc0cb ("igc: Correct the launchtime offset") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix reset adapter logics when tx mode changeFaizal Rahim
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes, remaining issues with the reset adapter logic in igc_tsn_offload_apply() have been observed: 1. The reset adapter logics for i225 and i226 differ, although they should be the same according to the guidelines in I225/6 HW Design Section 7.5.2.1 on software initialization during tx mode changes. 2. The i225 resets adapter every time, even though tx mode doesn't change. This occurs solely based on the condition igc_is_device_id_i225() when calling schedule_work(). 3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only resets adapter for legacy->tsn tx mode transitions. 4. qbv_count introduced in the patch is actually not needed; in this context, a non-zero value of qbv_count is used to indicate if tx mode was unconditionally set to tsn in igc_tsn_enable_offload(). This could be replaced by checking the existing register IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit. This patch resolves all issues and enters schedule_work() to reset the adapter only when changing tx mode. It also removes reliance on qbv_count. qbv_count field will be removed in a future patch. Test ran: 1. Verify reset adapter behaviour in i225/6: a) Enrol a new GCL Reset adapter observed (tx mode change legacy->tsn) b) Enrol a new GCL without deleting qdisc No reset adapter observed (tx mode remain tsn->tsn) c) Delete qdisc Reset adapter observed (tx mode change tsn->legacy) 2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed" to confirm it remains resolved. Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix qbv_config_change_errors logicsFaizal Rahim
When user issues these cmds: 1. Either a) or b) a) mqprio with hardware offload disabled b) taprio with txtime-assist feature enabled 2. etf 3. tc qdisc delete 4. taprio with base time in the past At step 4, qbv_config_change_errors wrongly increased by 1. Excerpt from IEEE 802.1Q-2018 8.6.9.3.1: "If AdminBaseTime specifies a time in the past, and the current schedule is running, then: Increment ConfigChangeError counter" qbv_config_change_errors should only increase if base time is in the past and no taprio is active. In user perspective, taprio was not active when first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is enabled with a dummy schedule at step 2 where it enters igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it enters igc_tsn_enable_offload() again, qbv_count is incremented to 2. Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and qbv_count > 1, qbv_config_change_errors value got incremented. This issue happens due to reliance on qbv_count field where a non-zero value indicates that taprio is running. But qbv_count increases regardless if taprio is triggered by user or by other tsn feature. It does not align with qbv_config_change_errors expectation where it is only concerned with taprio triggered by user. Fixing this by relocating the qbv_config_change_errors logic to igc_save_qbv_schedule(), eliminating reliance on qbv_count and its inaccuracies from i225/6's multiple uses of qbv feature for other TSN features. The new function created: igc_tsn_is_taprio_activated_by_user() uses taprio_offload_enable field to indicate that the current running taprio was triggered by user, instead of triggered by non-qbv feature like etf. Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix packet still tx after gate close by reducing i226 MAC retry bufferFaizal Rahim
Testing uncovered that even when the taprio gate is closed, some packets still transmit. According to i225/6 hardware errata [1], traffic might overflow the planned QBV window. This happens because MAC maintains an internal buffer, primarily for supporting half duplex retries. Therefore, even when the gate closes, residual MAC data in the buffer may still transmit. To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes to the recommended 88 bytes by modifying the RETX_CTL register value. This follows guidelines from: [1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9: TSN: Packet Transmission Might Cross Qbv Window [2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control Note that the RETX_CTL register can't be used in TSN mode because half duplex feature cannot coexist with TSN. Test Steps: 1. Send taprio cmd to board A: tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 4 \ map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \ queues 1@0 1@1 1@2 1@3 \ base-time 0 \ sched-entry S 0x07 500000 \ sched-entry S 0x0f 500000 \ flags 0x2 \ txtime-delay 0 Note that for TC3, gate should open for 500us and close for another 500us. 3. Take tcpdump log on Board B. 4. Send udp packets via UDP tai app from Board A to Board B. 5. Analyze tcpdump log via wireshark log on Board B. Ensure that the total time from the first to the last packet received during one cycle for TC3 does not exceed 500us. Fixes: 43546211738e ("igc: Add new device ID's") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-31igc: Fix double reset adapter triggered from a single taprio cmdFaizal Rahim
Following the implementation of "igc: Add TransmissionOverrun counter" patch, when a taprio command is triggered by user, igc processes two commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both commands unconditionally pass through igc_tsn_offload_apply() which evaluates and triggers reset adapter. The double reset causes issues in the calculation of adapter->qbv_count in igc. TAPRIO_CMD_REPLACE command is expected to reset the adapter since it activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same because it doesn't configure any driver-specific TSN settings. So, the evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS. To address this, commands parsing are relocated to igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter reset will exit after processing, thus avoiding igc_tsn_offload_apply(). Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-16Merge tag 'net-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
2024-07-15Merge branch 'net-make-timestamping-selectable'Jakub Kicinski
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-13Merge tag 'timers-v6.11-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event driver updates from Daniel Lezcano: - Remove unnecessary local variables initialization as they will be initialized in the code path anyway right after on the ARM arch timer and the ARM global timer (Li kunyu) - Fix a race condition in the interrupt leading to a deadlock on the SH CMT driver. Note that this fix was not tested on the platform using this timer but the fix seems reasonable enough to be picked confidently (Niklas Söderlund) - Increase the rating of the gic-timer and use the configured width clocksource register on the MIPS architecture (Jiaxun Yang) - Add the DT bindings for the TMU on the Renesas platforms (Geert Uytterhoeven) - Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas Bonnefille) - Add the rtl-otto timer driver along with the DT bindings for the Realtek platform (Chris Packham) Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
2024-07-11igc: Remove the internal 'eee_advert' fieldSasha Neftin
Since the kernel's 'ethtool_keee' structure is in use, the internal 'eee_advert' field becomes pointless and can be removed. This patch comes to clean up this redundant code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13Revert "igc: fix a log entry using uninitialized netdev"Sasha Neftin
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-10net: intel: Use *-y instead of *-objs in MakefileAndy Shevchenko
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05igc: Fix Energy Efficient Ethernet support declarationSasha Neftin
The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show <device>" (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-03igc: Remove convert_art_ns_to_tsc()Thomas Gleixner
The core code now provides a mechanism to convert the ART base clock to the corresponding TSC value without requiring an architecture specific function. Replace the direct conversion by filling in the required data. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240513103813.5666-5-lakshmi.sowjanya.d@intel.com
2024-05-20Merge tag 'dma-mapping-6.10-2024-05-20' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation
2024-05-08igc: fix a log entry using uninitialized netdevCorinna Vinschen
During successful probe, igc logs this: [ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The reason is that igc_ptp_init() is called very early, even before register_netdev() has been called. So the netdev_info() call works on a partially uninitialized netdev. Fix this by calling igc_ptp_init() after register_netdev(), right after the media autosense check, just as in igb. Add a comment, just as in igb. Now the log message is fine: [ 5.200987] igc 0000:01:00.0 eth0: PHC added Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-26igc: Add Tx hardware timestamp request for AF_XDP zero-copy packetSong Yoong Siang
This patch adds support to per-packet Tx hardware timestamp request to AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that user needs to enable Tx HW timestamp capability via igc_ioctl() with SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request. Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0 (adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have four sets of timestamping registers. *skb and *xsk_tx_buffer pointers are used to indicate whether the timestamping register is already occupied. Furthermore, a boolean variable named xsk_pending_ts is used to hold the transmit completion until the tx hardware timestamp is ready. This is because, for i225/i226, the timestamp notification event comes some time after the transmit completion event. The driver will retrigger hardware irq to clean the packet after retrieve the tx hardware timestamp. Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook to the metadata location of the transmit packet. When the Tx timestamp interrupt is fired, the interrupt handler will copy the value of Tx hwts into metadata location via xsk_tx_metadata_complete(). This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata on Intel ADL-S platform. Below are the test steps and results. Test Step 1: Run xdp_hw_metadata app ./xdp_hw_metadata <iface> > /dev/shm/result.log Test Step 2: Enable Tx hardware timestamp hwstamp_ctl -i <iface> -t 1 -r 1 Test Step 3: Run ptp4l and phc2sys for time synchronization Test Step 4: Generate UDP packets with 1ms interval for 10s trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000 Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic Based on iperf3 results below, the impact of holding tx completion to throughput is not observable. Result of last UDP packet (no. 10000) in Step 4: poll: 1 (0) skip=99 fail=0 redir=10000 xsk_ring_cons__peek: 1 0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP rx_hash: 0x2049BE1D with RSS type:0x1 HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec) XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6 0x5640a37972d0: complete tx idx=9999 addr=f010 HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec) XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec) HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec) 0x5640a37972d0: complete rx idx=10127 addr=f2110 Result of iperf3 without tx hwts request in step 5: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender [ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver Result of iperf3 running parallel with trafgen command in step 6: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender [ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com> Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24igc: Fix LED-related deadlock on driver unbindLukas Wunner
Roman reports a deadlock on unplug of a Thunderbolt docking station containing an Intel I225 Ethernet adapter. The root cause is that led_classdev's for LEDs on the adapter are registered such that they're device-managed by the netdev. That results in recursive acquisition of the rtnl_lock() mutex on unplug: When the driver calls unregister_netdev(), it acquires rtnl_lock(), then frees the device-managed resources. Upon unregistering the LEDs, netdev_trig_deactivate() invokes unregister_netdevice_notifier(), which tries to acquire rtnl_lock() again. Avoid by using non-device-managed LED registration. Stack trace for posterity: schedule+0x6e/0xf0 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x2a0/0x750 unregister_netdevice_notifier+0x40/0x150 netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev] led_trigger_set+0x102/0x330 led_classdev_unregister+0x4b/0x110 release_nodes+0x3d/0xb0 devres_release_all+0x8b/0xc0 device_del+0x34f/0x3c0 unregister_netdevice_many_notify+0x80b/0xaf0 unregister_netdev+0x7c/0xd0 igc_remove+0xd8/0x1e0 [igc] pci_device_remove+0x3f/0xb0 Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226") Reported-by: Roman Lozko <lozko.roma@gmail.com> Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/ Reported-by: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com> Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/ Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225 Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08igc: Remove redundant runtime resume for ethtool opsBjorn Helgaas
8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to resume suspended devices before any ethtool_ops callback and allow suspend after it completed. Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path, so the device is resumed before any ethtool_ops callback even if the driver didn't supply a .begin() callback. Remove the .begin() and .complete() callbacks, which are now redundant because dev_ethtool() already resumes the device. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>