summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
10 daystreewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
13 daysidpf: fix adapter NULL pointer dereference on rebootEmil Tantilov
With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. Reported-by: Yuying Ma <yuma@redhat.com> Fixes: e850efed5e15 ("idpf: add module register and probe functionality") Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
13 daysixgbe: fix media type detection for E610 devicePiotr Kwapulinski
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect media type detection for E610 device. It reproduces when advertised speed is modified after driver reload. Clear the previous outdated PHY type high value. Reproduction steps: modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 modprobe -r ixgbe modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 Result before the fix: netlink error: link settings update failed netlink error: Invalid argument Result after the fix: No output error Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
13 dayse1000e: change k1 configuration on MTP and later platformsVitaly Lifshits
Starting from Meteor Lake, the Kumeran interface between the integrated MAC and the I219 PHY works at a different frequency. This causes sporadic MDI errors when accessing the PHY, and in rare circumstances could lead to packet corruption. To overcome this, introduce minor changes to the Kumeran idle state (K1) parameters during device initialization. Hardware reset reverts this configuration, therefore it needs to be applied in a few places. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
13 daysigc: Fix TX drops in XDP ZCZdenek Bouska
Fixes TX frame drops in AF_XDP zero copy mode when budget < 4. xsk_tx_peek_desc() consumed TX frame and it was ignored because of low budget. Not even AF_XDP completion was done for dropped frames. It can be reproduced on i226 by sending 100000x 60 B frames with launch time set to minimal IPG (672 ns between starts of frames) on 1Gbit/s. Always 1026 frames are not sent and are missing a completion. Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
13 daysigc: Fix XSK queue NAPI ID mappingJoe Damato
In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK queues were incorrectly unmapped from their NAPI instances. After discussion on the mailing list and the introduction of a test to codify the expected behavior, we can see that the unmapping causes the check_xsk test to fail: NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py [...] # Check| ksft_eq(q.get('xsk', None), {}, # Check failed None != {} xsk attr on queue we configured not ok 4 queues.check_xsk After this commit, the test passes: ok 4 queues.check_xsk Note that the test itself is only in net-next, so I tested this change by applying it to my local net-next tree, booting, and running the test. Cc: stable@vger.kernel.org Fixes: b65969856d4f ("igc: Link queues to NAPI instances") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-26Merge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-25Merge tag 'ipsec-next-2025-03-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-03-24 1) Prevent setting high order sequence number bits input in non-ESN mode. From Leon Romanovsky. 2) Support PMTU handling in tunnel mode for packet offload. From Leon Romanovsky. 3) Make xfrm_state_lookup_byaddr lockless. From Florian Westphal. 4) Remove unnecessary NULL check in xfrm_lookup_with_ifid(). From Dan Carpenter. * tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid() xfrm: state: make xfrm_state_lookup_byaddr lockless xfrm: check for PMTU in tunnel mode for packet offload xfrm: provide common xdo_dev_offload_ok callback implementation xfrm: rely on XFRM offload xfrm: simplify SA initialization routine xfrm: delay initialization of offload path till its actually requested xfrm: prevent high SEQ input in non-ESN mode ==================== Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-20igb: reject invalid external timestamp requests for 82580-based HWJacob Keller
The igb_ptp_feature_enable_82580 function correctly checks that unknown flags are not passed to the function. However, it does not actually check PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp function. The data sheet for the 82580 product says: Upon a change in the input level of one of the SDP pins that was configured to detect Time stamp events using the TSSDP register, a time stamp of the system time is captured into one of the two auxiliary time stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1). For example to define timestamping of events in the AUXSTMPL0 and AUXSTMPH0 registers, Software should: 1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1. 2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping The same paragraph is in the i350 and i354 data sheets. The wording implies that the time stamps are captured at any level change. There does not appear to be any way to only timestamp one edge of the signal. Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18idpf: check error for register_netdev() on initEmil Tantilov
Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Suggested-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()Mateusz Polchlopek
Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. Fixes: 99f419df8a5c ("ice: enable FDIR filters from raw binary patterns for VFs") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix input validation for virtchnl BWLukasz Czapnik
Add missing validation of tc and queue id values sent by a VF in ice_vc_cfg_q_bw(). Additionally fixed logged value in the warning message, where max_tx_rate was incorrectly referenced instead of min_tx_rate. Also correct error handling in this function by properly exiting when invalid configuration is detected. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: validate queue quanta parameters to prevent OOB accessJan Glaza
Add queue wraparound prevention in quanta configuration. Ensure end_qid does not overflow by validating start_qid and num_queues. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: stop truncating queue ids when checkingJan Glaza
Queue IDs can be up to 4096, fix invalid check to stop truncating IDs to 8 bits. Fixes: bf93bf791cec8 ("ice: introduce ice_virtchnl.c and ice_virtchnl.h") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix reservation of resources for RDMA when disabledJesse Brandeburg
If the CONFIG_INFINIBAND_IRDMA symbol is not enabled as a module or a built-in, then don't let the driver reserve resources for RDMA. The result of this change is a large savings in resources for older kernels, and a cleaner driver configuration for the IRDMA=n case for old and new kernels. Implement this by avoiding enabling the RDMA capability when scanning hardware capabilities. Note: Loading the out-of-tree irdma driver in connection to the in-kernel ice driver, is not supported, and should not be attempted, especially when disabling IRDMA in the kernel config. Fixes: d25a0fc41c1f ("ice: Initialize RDMA support") Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Acked-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: ensure periodic output start time is in the futureKarol Kolacinski
On E800 series hardware, if the start time for a periodic output signal is programmed into GLTSYN_TGT_H and GLTSYN_TGT_L registers, the hardware logic locks up and the periodic output signal never starts. Any future attempt to reprogram the clock function is futile as the hardware will not reset until a power on. The ice_ptp_cfg_perout function has logic to prevent this, as it checks if the requested start time is in the past. If so, a new start time is calculated by rounding up. Since commit d755a7e129a5 ("ice: Cache perout/extts requests and check flags"), the rounding is done to the nearest multiple of the clock period, rather than to a full second. This is more accurate, since it ensures the signal matches the user request precisely. Unfortunately, there is a race condition with this rounding logic. If the current time is close to the multiple of the period, we could calculate a target time that is extremely soon. It takes time for the software to program the registers, during which time this requested start time could become a start time in the past. If that happens, the periodic output signal will lock up. For large enough periods, or for the logic prior to the mentioned commit, this is unlikely. However, with the new logic rounding to the period and with a small enough period, this becomes inevitable. For example, attempting to enable a 10MHz signal requires a period of 100 nanoseconds. This means in the *best* case, we have 99 nanoseconds to program the clock output. This is essentially impossible, and thus such a small period practically guarantees that the clock output function will lock up. To fix this, add some slop to the clock time used to check if the start time is in the past. Because it is not critical that output signals start immediately, but it *is* critical that we do not brick the function, 0.5 seconds is selected. This does mean that any requested output will be delayed by at least 0.5 seconds. This slop is applied before rounding, so that we always round up to the nearest multiple of the period that is at least 0.5 seconds in the future, ensuring a minimum of 0.5 seconds to program the clock output registers. Finally, to ensure that the hardware registers programming the clock output complete in a timely manner, add a write flush to the end of ice_ptp_write_perout. This ensures we don't risk any issue with PCIe transaction batching. Strictly speaking, this fixes a race condition all the way back at the initial implementation of periodic output programming, as it is theoretically possible to trigger this bug even on the old logic when always rounding to a full second. However, the window is narrow, and the code has been refactored heavily since then, making a direct backport not apply cleanly. Fixes: d755a7e129a5 ("ice: Cache perout/extts requests and check flags") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: health.c: fix compilation on gcc 7.5Przemek Kitszel
GCC 7 is not as good as GCC 8+ in telling what is a compile-time const, and thus could be used for static storage. Fortunately keeping strings as const arrays is enough to make old gcc happy. Excerpt from the report: My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0. CC [M] drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution') drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]') drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant "Change or replace the module or cable.", {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]') drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 85d6164ec56d ("ice: add fw and port health reporters") Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ixgbe: add support for thermal sensor event receptionJedrzej Jagielski
E610 NICs unlike the previous devices utilising ixgbe driver are notified in the case of overheating by the FW ACI event. In event of overheat when threshold is exceeded, FW suspends all traffic and sends overtemp event to the driver. Then driver logs appropriate message and disables the adapter instance. The card remains in that state until the platform is rebooted. This approach is a solution to the fact current version of the E610 FW doesn't support reading thermal sensor data by the SW. So give to user at least any info that overtemp event has occurred, without interface disappearing from the OS without any note. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ixgbe: add PTP support for E610 devicePiotr Kwapulinski
Add PTP support for E610 adapter. The E610 is based on X550 and adds firmware managed link, enhanced security capabilities and support for updated server manageability. It does not introduce any new PTP features compared to X550. Reviewed-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-6-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ice: E825C PHY register cleanupKarol Kolacinski
Minor PTP register refactor, including logical grouping E825C 1-step timestamping registers. Remove unused register definitions (PHY_REG_GPCS_BITSLIP, PHY_REG_REVISION). Also, apply preferred GENMASK macro (instead of ICE_M) for register fields definition affected by this patch. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-5-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ice: Refactor E825C PHY registers info structKarol Kolacinski
Simplify ice_phy_reg_info_eth56g struct definition to include base address for the very first quad. Use base address info and 'step' value to determine address for specific PHY quad. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-4-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ice: rename ice_ptp_init_phc_eth56g functionKarol Kolacinski
Refactor the code by changing ice_ptp_init_phc_eth56g function name to ice_ptp_init_phc_e825, to be consistent with the naming pattern for other devices. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-3-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ice: Add E830 checksum offload supportPaul Greenwalt
E830 supports raw receive and generic transmit checksum offloads. Raw receive checksum support is provided by hardware calculating the checksum over the whole packet, regardless of type. The calculated checksum is provided to driver in the Rx flex descriptor. Then the driver assigns the checksum to skb->csum and sets skb->ip_summed to CHECKSUM_COMPLETE. Generic transmit checksum support is provided by hardware calculating the checksum given two offsets: the start offset to begin checksum calculation, and the offset to insert the calculated checksum in the packet. Support is advertised to the stack using NETIF_F_HW_CSUM feature. E830 has the following limitations when both generic transmit checksum offload and TCP Segmentation Offload (TSO) are enabled: 1. Inner packet header modification is not supported. This restriction includes the inability to alter TCP flags, such as the push flag. As a result, this limitation can impact the receiver's ability to coalesce packets, potentially degrading network throughput. 2. The Maximum Segment Size (MSS) is limited to 1023 bytes, which prevents support of Maximum Transmission Unit (MTU) greater than 1063 bytes. Therefore NETIF_F_HW_CSUM and NETIF_F_ALL_TSO features are mutually exclusive. NETIF_F_HW_CSUM hardware feature support is indicated but is not enabled by default. Instead, IP checksums and NETIF_F_ALL_TSO are the defaults. Enforcement of mutual exclusivity of NETIF_F_HW_CSUM and NETIF_F_ALL_TSO is done in ice_set_features(). Mutual exclusivity of IP checksums and NETIF_F_HW_CSUM is handled by netdev_fix_features(). When NETIF_F_HW_CSUM is requested the provided skb->csum_start and skb->csum_offset are passed to hardware in the Tx context descriptor generic checksum (GCS) parameters. Hardware calculates the 1's complement from skb->csum_start to the end of the packet, and inserts the result in the packet at skb->csum_offset. Co-developed-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-2-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-08net: move misc netdev_lock flavors to a separate headerJakub Kicinski
Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-06net: hold netdev instance lock during nft ndo_setup_tcStanislav Fomichev
Introduce new dev_setup_tc for nft ndo_setup_tc paths. Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-06net: hold netdev instance lock during ndo_open/ndo_stopStanislav Fomichev
For the drivers that use shaper API, switch to the mode where core stack holds the netdev lock. This affects two drivers: * iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly remove these * netdevsim - switch to _locked APIs to avoid deadlock iavf_close diff is a bit confusing, the existing call looks like this: iavf_close() { netdev_lock() .. netdev_unlock() wait_event_timeout(down_waitqueue) } I change it to the following: netdev_lock() iavf_close() { .. netdev_unlock() wait_event_timeout(down_waitqueue) netdev_lock() // reusing this lock call } netdev_unlock() Since I'm reusing existing netdev_lock call, so it looks like I only add netdev_unlock. Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05ice: register devlink prior to creating health reportersPrzemek Kitszel
ice_health_init() was introduced in the commit 2a82874a3b7b ("ice: add Tx hang devlink health reporter"). The call to it should have been put after ice_devlink_register(). It went unnoticed until next reporter by Konrad, which receives events from FW. FW is reporting all events, also from prior driver load, and thus it is not unlikely to have something at the very beginning. And that results in a splat: [ 24.455950] ? devlink_recover_notify.constprop.0+0x198/0x1b0 [ 24.455973] devlink_health_report+0x5d/0x2a0 [ 24.455976] ? __pfx_ice_health_status_lookup_compare+0x10/0x10 [ice] [ 24.456044] ice_process_health_status_event+0x1b7/0x200 [ice] Do the analogous thing for deinit patch. Fixes: 85d6164ec56d ("ice: add fw and port health reporters") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: Fix switchdev slow-path in LAGMarcin Szycik
Ever since removing switchdev control VSI and using PF for port representor Tx/Rx, switchdev slow-path has been working improperly after failover in SR-IOV LAG. LAG assumes that the first uplink to be added to the aggregate will own VFs and have switchdev configured. After failing-over to the other uplink, representors are still configured to Tx through the uplink they are set up on, which fails because that uplink is now down. On failover, update all PRs on primary uplink to use the currently active uplink for Tx. Call netif_keep_dst(), as the secondary uplink might not be in switchdev mode. Also make sure to call ice_eswitch_set_target_vsi() if uplink is in LAG. On the Rx path, representors are already working properly, because default Tx from VFs is set to PF owning the eswitch. After failover the same PF is receiving traffic from VFs, even though link is down. Fixes: defd52455aee ("ice: do Tx through PF netdev in slow-path") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: fix memory leak in aRFS after resetGrzegorz Nitka
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by adding a checker to verify if aRFS memory is already allocated while configuring VSI. aRFS objects are allocated in two cases: - as part of VSI initialization (at probe), and - as part of reset handling However, VSI reconfiguration executed during reset involves memory allocation one more time, without prior releasing already allocated resources. This led to the memory leak with the following signature: [root@os-delivery ~]# cat /sys/kernel/debug/kmemleak unreferenced object 0xff3c1ca7252e6000 (size 8192): comm "kworker/0:0", pid 8, jiffies 4296833052 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340 [<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice] [<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice] [<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice] [<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice] [<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice] [<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0 [<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20 [<ffffffff98f0b6d9>] process_one_work+0x179/0x390 [<ffffffff98f0c1e9>] worker_thread+0x239/0x340 [<ffffffff98f14abc>] kthread+0xcc/0x100 [<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50 [<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30 ... Fixes: 28bf26724fdb ("ice: Implement aRFS") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: do not configure destination override for switchdevLarysa Zaremba
After switchdev is enabled and disabled later, LLDP packets sending stops, despite working perfectly fine before and during switchdev state. To reproduce (creating/destroying VF is what triggers the reconfiguration): devlink dev eswitch set pci/<address> mode switchdev echo '2' > /sys/class/net/<ifname>/device/sriov_numvfs echo '0' > /sys/class/net/<ifname>/device/sriov_numvfs This happens because LLDP relies on the destination override functionality. It needs to 1) set a flag in the descriptor, 2) set the VSI permission to make it valid. The permissions are set when the PF VSI is first configured, but switchdev then enables it for the uplink VSI (which is always the PF) once more when configured and disables when deconfigured, which leads to software-generated LLDP packets being blocked. Do not modify the destination override permissions when configuring switchdev, as the enabled state is the default configuration that is never modified. Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-27ice: dpll: Remove newline at the end of a netlink error messageGal Pressman
Netlink error messages should not have a newline at the end of the string. Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250226093904.6632-6-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.14-rc5). Conflicts: drivers/net/ethernet/cadence/macb_main.c fa52f15c745c ("net: cadence: macb: Synchronize stats calculations") 75696dd0fd72 ("net: cadence: macb: Convert to get_stats64") https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au Adjacent changes: drivers/net/ethernet/intel/ice/ice_sriov.c 79990cf5e7ad ("ice: Fix deinitializing VF in error path") a203163274a4 ("ice: simplify VF MSI-X managing") net/ipv4/tcp.c 18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace") 297d389e9e5b ("net: prefix devmem specific helpers") net/mptcp/subflow.c 8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join") c3349a22c200 ("mptcp: consolidate subflow cleanup") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27idpf: fix checksums set in idpf_rx_rsc()Eric Dumazet
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26idpf: use napi's irq affinityAhmed Zaki
Delete the driver CPU affinity info and use the core's napi config instead. Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://patch.msgid.link/20250224232228.990783-6-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26ice: use napi's irq affinity and rmap IRQ notifiersAhmed Zaki
Delete the driver CPU affinity and aRFS rmap info, use the core's API instead. Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://patch.msgid.link/20250224232228.990783-5-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26ice: clear NAPI's IRQ numbers in ice_vsi_clear_napi_queues()Ahmed Zaki
We set the NAPI's IRQ number in ice_vsi_set_napi_queues(). Clear the NAPI's IRQ in ice_vsi_clear_napi_queues(). Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://patch.msgid.link/20250224232228.990783-4-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net: skb: free up one bit in tx_flagsWillem de Bruijn
The linked series wants to add skb tx completion timestamps. That needs a bit in skb_shared_info.tx_flags, but all are in use. A per-skb bit is only needed for features that are configured on a per packet basis. Per socket features can be read from sk->sk_tsflags. Per packet tsflags can be set in sendmsg using cmsg, but only those in SOF_TIMESTAMPING_TX_RECORD_MASK. Per packet tsflags can also be set without cmsg by sandwiching a send inbetween two setsockopts: val |= SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); write(fd, buf, sz); val &= ~SOF_TIMESTAMPING_$FEATURE; setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); Changing a datapath test from skb_shinfo(skb)->tx_flags to skb->sk->sk_tsflags can change behavior in that case, as the tx_flags is written before the second setsockopt updates sk_tsflags. Therefore, only bits can be reclaimed that cannot be set by cmsg and are also highly unlikely to be used to target individual packets otherwise. Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This selects between clock and free running counter source for HW TX timestamps. It is probable that all packets of the same socket will always use the same source. Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ixgbe: fix media cage present detection for E610 devicePiotr Kwapulinski
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect checking of media cage presence for E610 device. Fix it. Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25iavf: fix circular lock dependency with netdev_lockJacob Keller
We have recently seen reports of lockdep circular lock dependency warnings when loading the iAVF driver: [ 1504.790308] ====================================================== [ 1504.790309] WARNING: possible circular locking dependency detected [ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted [ 1504.790311] ------------------------------------------------------ [ 1504.790312] kworker/u128:0/13566 is trying to acquire lock: [ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710 [ 1504.790320] [ 1504.790320] but task is already holding lock: [ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf] [ 1504.790330] [ 1504.790330] which lock already depends on the new lock. [ 1504.790330] [ 1504.790330] [ 1504.790330] the existing dependency chain (in reverse order) is: [ 1504.790331] [ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}: [ 1504.790333] __lock_acquire+0x52d/0xbb0 [ 1504.790337] lock_acquire+0xd9/0x330 [ 1504.790338] mutex_lock_nested+0x4b/0xb0 [ 1504.790341] iavf_finish_config+0x37/0x240 [iavf] [ 1504.790347] process_one_work+0x248/0x6d0 [ 1504.790350] worker_thread+0x18d/0x330 [ 1504.790352] kthread+0x10e/0x250 [ 1504.790354] ret_from_fork+0x30/0x50 [ 1504.790357] ret_from_fork_asm+0x1a/0x30 [ 1504.790361] [ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}: [ 1504.790364] check_prev_add+0xf1/0xce0 [ 1504.790366] validate_chain+0x46a/0x570 [ 1504.790368] __lock_acquire+0x52d/0xbb0 [ 1504.790370] lock_acquire+0xd9/0x330 [ 1504.790371] mutex_lock_nested+0x4b/0xb0 [ 1504.790372] register_netdevice+0x52c/0x710 [ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf] [ 1504.790379] process_one_work+0x248/0x6d0 [ 1504.790381] worker_thread+0x18d/0x330 [ 1504.790383] kthread+0x10e/0x250 [ 1504.790385] ret_from_fork+0x30/0x50 [ 1504.790387] ret_from_fork_asm+0x1a/0x30 [ 1504.790389] [ 1504.790389] other info that might help us debug this: [ 1504.790389] [ 1504.790389] Possible unsafe locking scenario: [ 1504.790389] [ 1504.790390] CPU0 CPU1 [ 1504.790391] ---- ---- [ 1504.790391] lock(&adapter->crit_lock); [ 1504.790393] lock(&dev->lock); [ 1504.790394] lock(&adapter->crit_lock); [ 1504.790395] lock(&dev->lock); [ 1504.790397] [ 1504.790397] *** DEADLOCK *** This appears to be caused by the change in commit 5fda3f35349b ("net: make netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in register_netdevice. The iAVF driver calls register_netdevice() from iavf_finish_config(), as a final stage of its state machine post-probe. It currently takes the RTNL lock, then the netdev lock, and then the device critical lock. This pattern is used throughout the driver. Thus there is a strong dependency that the crit_lock should not be acquired before the net device lock. The change to register_netdevice creates an ABBA lock order violation because the iAVF driver is holding the crit_lock while calling register_netdevice, which then takes the netdev_lock. It seems likely that future refactors could result in netdev APIs which hold the netdev_lock while calling into the driver. This means that we should not re-order the locks so that netdev_lock is acquired after the device private crit_lock. Instead, notice that we already release the netdev_lock prior to calling the register_netdevice. This flow only happens during the early driver initialization as we transition through the __IAVF_STARTUP, __IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc. Analyzing the places where we take crit_lock in the driver there are two sources: a) several of the work queue tasks including adminq_task, watchdog_task, reset_task, and the finish_config task. b) various callbacks which ultimately stem back to .ndo operations or ethtool operations. The latter cannot be triggered until after the netdevice registration is completed successfully. The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue that has a max limit of 1, and thus guarantees that only a single work item on the queue is executing at any given time, so none of the other work threads could be executing due to the ordered workqueue guarantees. The iavf_finish_config() function also does not do anything else after register_netdevice, unless it fails. It seems unlikely that the driver private crit_lock is protecting anything that register_netdevice() itself touches. Thus, to fix this ABBA lock violation, lets simply release the adapter->crit_lock as well as netdev_lock prior to calling register_netdevice(). We do still keep holding the RTNL lock as required by the function. If we do fail to register the netdevice, then we re-acquire the adapter critical lock to finish the transition back to __IAVF_INIT_CONFIG_ADAPTER. This ensures every call where both netdev_lock and the adapter->crit_lock are acquired under the same ordering. Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ice: Avoid setting default Rx VSI twice in switchdev setupMarcin Szycik
As part of switchdev environment setup, uplink VSI is configured as default for both Tx and Rx. Default Rx VSI is also used by promiscuous mode. If promisc mode is enabled and an attempt to enter switchdev mode is made, the setup will fail because Rx VSI is already configured as default (rule exists). Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on echo 1 > /sys/class/net/$PF1/device/sriov_numvfs In switchdev setup, use ice_set_dflt_vsi() instead of plain ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if it's already configured. Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ice: Fix deinitializing VF in error pathMarcin Szycik
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ethtool: Symmetric OR-XOR RSS hashGal Pressman
Add an additional type of symmetric RSS hash type: OR-XOR. The "Symmetric-OR-XOR" algorithm transforms the input as follows: (SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT) Change 'cap_rss_sym_xor_supported' to 'supported_input_xfrm', a bitmap of supported RXH_XFRM_* types. Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250224174416.499070-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2025-02-20 We've added 19 non-merge commits during the last 8 day(s) which contain a total of 35 files changed, 1126 insertions(+), 53 deletions(-). The main changes are: 1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing 2) Add network TX timestamping support to BPF sock_ops, from Jason Xing 3) Add TX metadata Launch Time support, from Song Yoong Siang * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: igc: Add launch time support to XDP ZC igc: Refactor empty frame insertion for launch time support net: stmmac: Add launch time support to XDP ZC selftests/bpf: Add launch time request to xdp_hw_metadata xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add simple bpf tests in the tx path for timestamping feature bpf: Support selective sampling for bpf timestamping bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING bpf: Disable unsafe helpers in TX timestamping callbacks bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping bpf: Add networking timestamping support to bpf_get/setsockopt() selftests/bpf: Add rto max for bpf_setsockopt test bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt ==================== Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21xfrm: provide common xdo_dev_offload_ok callback implementationLeon Romanovsky
Almost all drivers except bond and nsim had same check if device can perform XFRM offload on that specific packet. The check was that packet doesn't have IPv4 options and IPv6 extensions. In NIC drivers, the IPv4 HELEN comparison was slightly different, but the intent was to check for the same conditions. So let's chose more strict variant as a common base. Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-02-20igc: Add launch time support to XDP ZCSong Yoong Siang
Enable Launch Time Control (LTC) support for XDP zero copy via XDP Tx metadata framework. This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata on Intel I225-LM Ethernet controller. Below are the test steps and result. Test 1: Send a single packet with the launch time set to 1 s in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 -L 1 2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 1 s in the future, the delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in printout of the xdp_hw_metadata application below. 0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP rx_hash: 0xE343384 with RSS type:0x1 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to User RX-time sec:0.0002 (183.103 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User RX-time sec:0.0001 (80.309 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x562ff5dc8880: ping-pong with csum=561c (want c7dd) csum_start=34 csum_offset=6 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW Launch-time sec:1.0000 (1000000.000 usec) 0x562ff5dc8880: complete tx idx=4 addr=4018 HW Launch-time: 1734578016467548904 (sec:1734578016.4675) delta to HW TX-complete-time sec:0.0000 (0.016 usec) HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675) delta to User TX-complete-time sec:0.0000 (32.546 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User TX-complete-time sec:0.9999 (999929.768 usec) HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW TX-complete-time sec:1.0000 (1000000.016 usec) 0x562ff5dc8880: complete rx idx=132 addr=84110 Test 2: Send 1000 packets with a 10 ms interval and the launch time set to 500 us in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo chrt -f 99 ./xdp_hw_metadata enp2s0 -l 500000 -L 1 > \ /dev/shm/result.log 2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 500 us in the future, the average delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in the analysis of /dev/shm/result.log below. The XDP launch time works correctly in sending 1000 packets continuously. Min delta: 0.005 us Avr delta: 0.016 us Max delta: 0.031 us Total packets forwarded: 1000 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-6-yoong.siang.song@intel.com
2025-02-20igc: Refactor empty frame insertion for launch time supportSong Yoong Siang
Refactor the code for inserting an empty frame into a new function igc_insert_empty_frame(). This change extracts the logic for inserting an empty packet from igc_xmit_frame_ring() into a separate function, allowing it to be reused in future implementations, such as the XDP zero copy transmit function. Remove the igc_desc_unused() checking in igc_init_tx_empty_descriptor() because the number of descriptors needed is guaranteed. Ensure that skb allocation and DMA mapping work for the empty frame, before proceeding to fill in igc_tx_buffer info, context descriptor, and data descriptor. Rate limit the error messages for skb allocation and DMA mapping failures. Update the comment to indicate that the 2 descriptors needed by the empty frame are already taken into consideration in igc_xmit_frame_ring(). Handle the case where the insertion of an empty frame fails and explain the reason behind this handling. Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-5-yoong.siang.song@intel.com
2025-02-18igc: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/baeaabb84aef1803dfae385f6e9614d6fc547667.1738746872.git.namcao@linutronix.de