| Age | Commit message (Collapse) | Author |
|---|
|
Based on wpa_auth as 1x_256 mode, need to set up
"use_fwsup" with BRCMF_PROFILE_FWSUP_1X.
Or it will happen trace warning when call brcmf_cfg80211_set_pmk().
[ 4481.831101] ------------[ cut here ]------------
[ 4481.831102] WARNING: CPU: 1 PID: 2997 at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac]
[...]
[ 4481.831202] Call Trace:
[ 4481.831204] <TASK>
[ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211]
[ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150
[ 4481.831237] genl_rcv_msg+0x104/0x240
[ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211]
[ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150
[ 4481.831259] netlink_rcv_skb+0x4e/0x100
[ 4481.831261] genl_rcv+0x24/0x40
[ 4481.831262] netlink_unicast+0x236/0x380
[ 4481.831264] netlink_sendmsg+0x250/0x4b0
[ 4481.831266] sock_sendmsg+0x5c/0x70
[ 4481.831269] ____sys_sendmsg+0x236/0x2b0
[ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0
[ 4481.831272] ___sys_sendmsg+0x86/0xd0
[ 4481.831274] ? avc_has_perm+0x8c/0x1a0
[ 4481.831276] ? preempt_count_add+0x6a/0xa0
[ 4481.831279] ? sock_has_perm+0x82/0xa0
[ 4481.831280] __sys_sendmsg+0x57/0xa0
[ 4481.831282] do_syscall_64+0x38/0x90
[ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4481.831286] RIP: 0033:0x7fd270d369b4
Fixes: 2526ff21aa77 ("brcmfmac: support 4-way handshake offloading for 802.1X")
Signed-off-by: Shelley Yang <shelley.yang@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260525083859.581246-1-shelley.yang@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mt76_connac_get_eht_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
Fixes: ba01944adee9f ("wifi: mt76: mt7996: add EHT beamforming support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260621-mt76_connac_get_he_phy_cap-fix-v1-4-ed4ccf7a0363@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 14061994184d ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260616161016.19346-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b623 ("wifi: mt76: Introduce the NPU generic layer")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b623 ("wifi: mt76: Introduce the NPU generic layer")
Cc: stable@vger.kernel.org
Tested-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If seems the check for err is wrong as the proper macaddr gets written
to from the EEPROM itself. Meaning checking err from of_get_mac_address is
wrong as the proper macaddr has been written by this point.
Closes:
https://lore.kernel.org/linux-wireless/30a90714-02d8-45f2-a7f1-4cfe0627d50b@skade.local/
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/ajRmlyx_AEGybykL@soda.int.kasm.eu/
Reported-by: Tobias Klausmann <klausman@schwarzvogel.de>
Fixes: 31ee1582717e ("wifi: mt76: fix of_get_mac_address error handling")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: John Rowley <lkml@johnrowley.me>
Link: https://patch.msgid.link/20260706232857.807044-1-rosenp@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260621-mt76_connac_get_he_phy_cap-fix-v1-3-ed4ccf7a0363@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
Fixes: c948b5da6bbec ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260621-mt76_connac_get_he_phy_cap-fix-v1-2-ed4ccf7a0363@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_connac_mcu_uni_bss_he_tlv()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it.
Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260621-mt76_connac_get_he_phy_cap-fix-v1-1-ed4ccf7a0363@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b60 ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad65309a ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708075539.726200-1-lgs201920130244@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The BCM43752 is not reliable with the default 512-byte SDIO function 2
block size: on an i.MX8MP board with an AMPAK AP6275S module at
SDR104 / 200 MHz, an iperf TX stress test kills WLAN within seconds:
mmc_submit_one: CMD53 sg block write failed -84
brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Commit d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
set up the 43752 like the 4373 for the F2 watermark but missed the F2
block size, which the 4373 limits to 256 bytes. The vendor driver
(bcmdhd) also programs a 256-byte F2 block size for this chip and runs
the same hardware without errors.
Group the 43752 with the 4373, matching the F2 watermark handling.
With this change a 10-minute bidirectional iperf3 soak completes with
zero SDIO errors at ~270 Mbit/s in each direction.
Backporting note: kernels before v6.18 name this id
SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752, so on those trees the case
label added by this patch must be adjusted to that name. Cherry-picking
the rename commit 74e2ef72bd4b ("wifi: brcmfmac: fix 43752 SDIO FWVID
incorrectly labelled as Cypress (CYW)") first is not a clean
alternative: on trees before v6.17 its context collides with the 43751
additions, and trees before v6.2 lack the FWVID framework it touches.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.17
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715-b43752-f2-blksz-v2-1-f9be49856050@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwif: fixes - 2026-07-21
This PR contains quite a few fixes, mostly found by LLMs. Notably:
- missing validation of TLVs length
- missing validation on the revision of BIOS tables
- missing validation of fw responses length
- protect against double free of RX pointers
- avoid double deregistration of the tzone core
- validate fields in FW responses before using them
- fix off-by-one in WLAN_EID_EXT_CAPABILITY parsing
- Add missing support for UNII-9
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload
to a struct hwsim_tx_rate * and unconditionally reads
IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds
the attribute from above (NLA_BINARY .len is a maximum) and the op sets
GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is
accepted and the loop reads past the payload.
Require the exact length in the policy, so a malformed attribute is
rejected before the handler runs.
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Link: https://patch.msgid.link/20260721115346.17236-1-security@auditcode.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-3-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-2-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 396939f94084 ("mwifiex: add HT operation IE in TDLS setup confirm")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716103042.88469-1-doruk@0sec.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace deprecated one-element arrays with flexible array members.
CONFIG_FORTIFY_SOURCE reports the following warning when
one-element arrays are used as variable-length buffers:
sta_cmd.c:1033 mwifiex_sta_prepare_cmd
memcpy: detected field-spanning write (size 84) of single field
"domain->triplet" at .../marvell/mwifiex/sta_cmd.c:1033 (size 3)
Convert affected structs to use flexible array members.
- Preserve existing wire layouts.
- Use DECLARE_FLEX_ARRAY() for structs inside affected unions.
Tested-on: WRT3200ACM, OpenWrt
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716001728.57799-1-gvalkov@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
at76_guess_freq() checks only that the received frame is at least a bare
802.11 header (24 bytes) before subtracting the fixed management-body
offset:
len -= el_off;
For both beacon and probe response frames, el_off is 36. If the frame is
shorter than el_off, subtracting it causes the calculated IE length to
wrap. The length is eventually passed to cfg80211_find_elem_match() as a
very large unsigned value, so the element walk runs beyond the RX skb.
This path is reached from at76_rx_tasklet() while scanning. If the device
delivers a truncated beacon or probe response, the oversized IE length
causes an out-of-bounds read during scanning.
Skip the IE lookup if the frame does not reach the variable elements,
before subtracting el_off.
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260715140815.1242033-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the
(re)association request IEs that the firmware copies into the event:
sinfo->assoc_req_ies = &event->data[len];
len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control;
sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len;
event->len is supplied by the device firmware and is never validated,
and the subtraction is unchecked. assoc_req_ies points into
adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the
kmalloc()'d struct mwifiex_adapter.
On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with
cfg80211_find_ie(), whose for_each_element() loop dereferences each
element header. A firmware-reported event->len larger than the bytes
actually received makes assoc_req_ies_len describe IEs that extend past
event_body, so the walk reads out of the adapter slab object, a
slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie).
An event->len smaller than the header instead makes the int subtraction
negative, which wraps to a huge size_t when stored in assoc_req_ies_len.
The same length is handed to cfg80211_new_sta(), so a more modest
over-claim can also copy stale event_body bytes into the
NL80211_CMD_NEW_STATION notification.
A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver
such an event while the interface is in AP/uAP mode.
Validate event->len before use: reject a length that underflows the
header or that would place the IEs outside the event_body[] buffer the
event was copied into. event->len here is struct mwifiex_assoc_event.len,
a payload field internal to this event, not the transport frame length,
so it is validated in this handler rather than at the generic
MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the
transport frame length. The bound is against event_body[MAX_EVENT_SIZE]
rather than the actually-received length because the transports store the
event differently (USB and SDIO leave the 4-byte event header in
event_skb, PCIe strips it via skb_pull), whereas event_body is the single
fixed buffer all of them copy the event into. This is the event-path
analogue of the receive-path bounds checks added in commit 119585281617
("wifi: mwifiex: Fix OOB and integer underflow when rx packets").
Fixes: e568634ae7ac ("mwifiex: add AP event handling framework")
Signed-off-by: HE WEI (ギカク) <skyexpoc@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260715135711.34688-1-skyexpoc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association.
Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260714091811.3596126-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.2-rc4
The most significant change is to fix an ath12k regression which led
to low MLO RX throughput on WCN7850.
The remainder are an assortment of minor bug fixes spread across many
of the ath drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix regression in rgpower table loading, caused by using
request_firmware(): when the requested firmware does not exist, e.g.
nxp/rgpower_WW.bin does not exist on OpenWRT builds for WRT3200ACM,
request_firmware() falls back to firmware_fallback_sysfs(), which expects
the firmware to be provided by user space using SYSFS. No such utility is
provided in this configuration, so the entire system locks up for 60
seconds, until the request times out. During this time, no other log
messages are observed, and the device does not respond to commands over
UART.
The request_firmware() call is performed in the following context:
current->comm kworker/1:2 in_task 1 irqs_disabled 0 in_atomic 0
Fixed by using request_firmware_direct(). This prevents fallback to SYSFS,
and avoids delay. The rgpower table is optional. The driver falls back
to the device tree power table if the firmware is not present.
The error code is printed for debugging and returned to the caller,
which only cares for success or failure, so there are no side effects.
Fixes: 7b6f16a25806 ("wifi: mwifiex: add rgpower table loading support")
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260712221709.7099-1-gvalkov@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reject firmware section TLVs that are shorter than the offset field
before subtracting sizeof(offset) from the section size.
This prevents size underflow for malformed TLVs.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.17b040b27edc.I6b32d1e9ad707417e2e604f08a63582456209372@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Validate revision is below 32 before BIT(revision) in PPAG parsing.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.d116dd2efdc1.I3c6cae5cb9d0acc2d94544bc755b0754a91b10ba@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.52a01f841f2a.Ic0131eaac31d9ff71b169138d9b0865cb39b44a9@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Validate ALIGN(tlv_len, 4) before advancing through external debug
TLVs to prevent parser length underflow.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.e08d6550c6ec.Iad64190a7d5cded553aff41973120396aef1b557@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Validate ALIGN(tlv_len, 4) against remaining parser length before
consuming bytes from the firmware image.
This avoids length underflow on malformed TLVs.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.393c286488f9.Ia39144dc3ca334325ee4eacb7420901e2446fc23@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Switch iwl_scan_offload_match_info::matches to a fixed-size array and
adjust D3 netdetect size handling accordingly.
In MVM D3 paths, compute expected payload size as
offsetof(struct iwl_scan_offload_match_info, matches) + matches_len to
preserve previous behavior after the struct layout change.
In MLD D3 netdetect handling, keep the simple full-notification size
assumption and validate against sizeof(*notif) before accessing data.
This keeps scan offload / netdetect functionality unchanged while
making length checks consistent with the new struct definition.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.4c4346140bcc.I44313ac41daca352e6aecdba09a1c3570c3eea06@changeid
|
|
We shouldn't trust the firmware about the length of the wowlan packet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.fbd989cc85e2.If68de403bfa4943732c025961154c20b01b09e83@changeid
|
|
When setting the TK for ranging with an associated peer, 32 bytes of
TK are copied from the vif key without verifying the actual key length
which may be only 16 bytes if CCMP-128 is used. Fix it by setting the
copy length according to the key cipher.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.e339570086bd.Iafff5aaf0e25f7d29e06f0ef456107c4062bbc7d@changeid
|
|
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.d7c3e75d47af.If88948108cfc8b5fb3ce5531d927855d1b3b6b30@changeid
|
|
mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of
the actual TID value 'tid'. This writes lq_color into a random tid_data
slot unrelated to the BA entry.
Since multi-TID blockack is not really in use, 'i' was always 0 and no
harm was done.
Add a out-of-bound check before accessing the array.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.919edee567eb.Ie85c350e3afe2b39709d0039072740d86660f8ae@changeid
|
|
iwl_pcie_init_fw_sec() iterates over LMAC, UMAC, and paging
firmware sections and writes to ctxt_dram->lmac_img[i],
ctxt_dram->umac_img[i], and ctxt_dram->virtual_img[i] without
first verifying that the counts derived from the firmware image
do not exceed the array size. An oversized firmware image could
cause out-of-bounds writes into the fixed-size context-info DRAM
arrays.
Add explicit WARN_ON checks for all three section counts and
return -EINVAL if any is exceeded.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.34db46ca12f3.I1aa225492a62f25293c147aa7293afa80a5d4215@changeid
|
|
Release CMD_WANT_SKB response buffer after successful timestamp parsing
to avoid leaking response allocations.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.31b38bef398b.Ib6a5a8bdd800779c8911da6859fd450d3d19c9e9@changeid
|
|
In iwl_mvm_wowlan_store_wake_pkt(), packet_len was initialized from
notif->wake_packet_length before the explicit check that len >=
sizeof(*notif).
Move the assignment of packet_len to after the size check so that
notif->wake_packet_length is only accessed once the payload length
has been validated.
Fixes: 219ed58feda9 ("wifi: iwlwifi: mvm: Add support for wowlan wake packet notification")
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.99d5cf85a528.Ic4aa736011d4fe88e0cd19723d1d48bb24642198@changeid
|
|
iwl_pnvm_complete_fn() casts pkt->data directly to
struct iwl_pnvm_init_complete_ntfy and reads the status field
without first verifying that the firmware notification payload
is large enough to contain that structure.
Add a WARN_ON_ONCE check against sizeof(*pnvm_ntf) and return
early without reading uninitialised memory if the payload is too
short.
Fixes: b3e4c0f34c17 ("iwlwifi: move PNVM implementation to common code")
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.7f2a669e5c75.I00465dcfcbccb250ae9af2d9bb305e24de1ba394@changeid
|
|
The expression list[*size++] increments the pointer 'size'
rather than the u8 value it points to (operator precedence: ++
binds to the pointer before the dereference). As a result the
block-list entry is written at the correct index but *size is
never incremented, so the caller's count stays at zero and
subsequent calls overwrite slot 0 every time.
Change to list[(*size)++] so that the value pointed to by size
is incremented after use as the array index.
Fixes: 5f4656610edb ("wifi: iwlwifi: extend TAS_CONFIG cmd support for v5")
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.d2cd92242582.Ife4140a4e27be2a1cd9f886c5a9b376ce182a019@changeid
|
|
The SMEM parsers cast firmware response payloads directly to shared
memory configuration structures. A short response can leave fields
outside the received payload while the driver still dereferences them.
Check the response payload length before reading the base fields in
both parser variants. Require the full legacy extended layout before
reading internal TX FIFO data. Valid responses keep the same parsed
values.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.fbdb0016a91d.I5f6c6e04589a24a233559191170ccb43372dee63@changeid
|
|
The SAR GEO command response is cast to
iwl_geo_tx_power_profiles_resp without verifying the payload length.
A malformed or unexpected firmware response can lead to reading an
invalid structure layout.
Add an explicit size check before accessing the response data and
return -EIO when the payload size is wrong.
Fixes: f604324eefec ("iwlwifi: remove iwl_validate_sar_geo_profile() export")
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.7e749b7d374a.I4ef54548bff6c6e7c7a57bee771ac12508aad677@changeid
|
|
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.0474ee89bab9.I84f151aabecb8921b587da092f29f78c47128f0f@changeid
|
|
We need to expect more channels on devices that support UNII-9.
Since iwl_ext_nvm_channels and iwl_uhb_nvm_channels are just a prefix
of iwl_unii9_nvm_channels just use iwl_unii9_nvm_channels and modify the
number of channels if the device does not support UNII-9 channels.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.473f48e6135d.I0e93cda753558aa4d9e3efcdd52cbc2eb9302c4a@changeid
|
|
Validate txq_id from TX response notification before passing to
iwl_trans_reclaim(). Other reclaim paths in this file perform this
check to prevent out-of-bounds access on malformed notifications.
Assisted-by: GitHubCopilot:claude-haiku-4.5
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715215523.b938c2dcf08d.I8a88ec359e229f1c41ac9c49fd9ce28a2b62b274@changeid
|
|
D3 resume notification handlers read firmware notification fields
before validating that the payload contains the complete fixed structure.
This causes buffer underread on malformed or truncated notifications.
Move payload length validation to occur before any field access in:
- iwl_mvm_parse_wowlan_info_notif: validate before reading num_mlo_link_keys
- iwl_mvm_wait_d3_notif D3_END handler: validate before reading flags
Assisted-by: GitHub Copilot <copilot@github.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.762193753434.I148991b8136cc5042fa08b5faf7b57d38aa2fb47@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.33e8978d8b36.Ibaedd4b0ce01405b940de7b90223b6d2c5136ffd@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260714141909.53d2722c79e7.Iebb922efa6173c92f14cd8aa8b4e7f372c0a0fb7@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
