| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
|
|
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
|
|
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
|
|
display_get_pci_dev_of() gets a referenced PCI device via
pci_get_device(). Drop that reference when pci_enable_device() fails and
release it during the managed teardown path after pci_disable_device().
Without that, ofdrm leaks the pci_dev reference on both the error path
and the normal cleanup path.
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420002513.216-1-dbgh9129@gmail.com
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
|
|
Replace ofdrm's code for programming the hardware gamma LUT with
DRM helpers. Either load a provided gamma ramp or program a default.
Set the individual entries with a callback.
Each gamma value is given as 3 individual 16-bit values for red,
green and blue. The driver reduces them to 8 bit to make them fit
into hardware registers.
v2:
- fix coding style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-5-tzimmermann@suse.de
|
|
Provide sysfb helpers for validating framebuffer integer values
against limits. Update drivers. If a driver did not specify a limit
for a certain value, use INT_MAX.
v2:
- declare module information near EOF (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-3-tzimmermann@suse.de
|
|
Add EDID support to sysfb connector helpers. Read the EDID property
from the OF node in ofdrm. Without EDID, this does nothing.
Some systems with OF display, such as 32-bit PPC Macintoshs, provide
the system display's EDID data as node property in their DT. Exporting
this information allows compositors to implement correct DPI and
meaningful color management.
v3:
- avoid parser error by clearing EDID extension field
v2:
- return errno codes on errors (Jani)
- simplify EDID read logic (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-13-tzimmermann@suse.de
|
|
Merge the primary plane code of ofdrm and simpledrm. Replace the
plane implementation in each driver with the shared helpers. Set
up driver callbacks and format modifiers with initializer macros.
The plane code in ofdrm and simpledrm is very similar. Ofdrm has a
more sophisticated implementation of atomic_disable, which clears
individual scanlines. The code in simpledrm clears the whole buffer
at once. Take the ofdrm version.
Simpledrm supports get_scanout_buffer. Import it into the shared
helpers, which makes it available in ofdrm.
The supported formats are all native formats plus an optional enulated
XRGB8888 if that's not already a native format. Provide an initializer
macro that computes the size of the formats array.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-12-tzimmermann@suse.de
|
|
Merge the CRTC functions of ofdrm and simpledrm. Replace the code
in each driver with the shared helpers. Set up callbacks with
initializer macros.
Ofdrm supports a gamma LUT, while simpledrm does not. So far ofdrm's
LUT size has been hard-coded in the driver CRTC's atomic_check helper.
Now pass the size of the LUT to the sysfb device. Ofdrm's custom
atomic_flush is still required to apply changes to the LUT. Simpledrm
passes a LUT size of 0, which disables the gamma LUT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-11-tzimmermann@suse.de
|
|
Move ofdrm's struct ofdrm_crtc_state plus functions to sysfb
helpers and rename everything to drm_sysfb_crtc_state.
The sysfb CRTC state is a regular CRTC state with information on
the primary plane's color format, as required for color management.
Helpers for sysfb planes will later set this up automatically.
In ofdrm and simpledrm, replace existing code with the new helpers.
Ofdrm continues to use the CRTC state for color management. This
has no effect on simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-10-tzimmermann@suse.de
|
|
Merge the connector functions of ofdrm and simpledrm. Replace the
code in each driver with the shared helpers. Set up callbacks with
initializer macros.
No effective code changes. The sysfb connector only returns the
preconfigured display mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-9-tzimmermann@suse.de
|
|
Provide initializer to set struct drm_mode_config_funcs. Convert
ofdrm and simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-8-tzimmermann@suse.de
|
|
Merge the mode-init functions of ofdrm and simpledrm to the new helper
drm_sysfb_mode(). Also implement the DPI defaults there. Replace the
code in each driver with the shared helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-7-tzimmermann@suse.de
|
|
Add struct drm_sysfb_device that stores the system display's hardware
settings. Further helpers for the mode-setting pipeline will use these
fields. Convert ofdrm and simpledrm by embedding the sysfb device in
their device structs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-6-tzimmermann@suse.de
|
|
The ofdrm and simpledrm drivers are special as they operate on
externally provided framebuffers. Move them into their own sub-
directory. Will let them share common code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-5-tzimmermann@suse.de
|
