1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
|
/*
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC8360E MDS board specific routines.
*
* Changelog:
* Jun 21, 2006 Initial version
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/qe_ic.h>
#include "mpc83xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc836x_mds_setup_arch(void)
{
struct device_node *np;
u8 __iomem *bcsr_regs = NULL;
mpc83xx_setup_arch();
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, resource_size(&res));
of_node_put(np);
}
#ifdef CONFIG_QUICC_ENGINE
if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
for_each_node_by_name(np, "ucc")
par_io_of_config(np);
#ifdef CONFIG_QE_USB
/* Must fixup Par IO before QE GPIO chips are registered. */
par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
#endif /* CONFIG_QE_USB */
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
uint svid;
/* Reset the Ethernet PHY */
#define BCSR9_GETHRST 0x20
clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
udelay(1000);
setbits8(&bcsr_regs[9], BCSR9_GETHRST);
/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
svid = mfspr(SPRN_SVR);
if (svid == 0x80480021) {
void __iomem *immap;
immap = ioremap(get_immrbase() + 0x14a8, 8);
/*
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
*/
setbits32(immap, 0x0c003000);
/*
* IMMR + 0x14AC[20:27] = 10101010
* (data delay for both UCC's)
*/
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
iounmap(immap);
}
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
}
machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
#ifdef CONFIG_QE_USB
static int __init mpc836x_usb_cfg(void)
{
u8 __iomem *bcsr;
struct device_node *np;
const char *mode;
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
if (!np)
return -ENODEV;
bcsr = of_iomap(np, 0);
of_node_put(np);
if (!bcsr)
return -ENOMEM;
np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
if (!np) {
ret = -ENODEV;
goto err;
}
#define BCSR8_TSEC1M_MASK (0x3 << 6)
#define BCSR8_TSEC1M_RGMII (0x0 << 6)
#define BCSR8_TSEC2M_MASK (0x3 << 4)
#define BCSR8_TSEC2M_RGMII (0x0 << 4)
/*
* Default is GMII (2), but we should set it to RGMII (0) if we use
* USB (Eth PHY is in RGMII mode anyway).
*/
clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
#define BCSR13_USBMASK 0x0f
#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
mode = of_get_property(np, "mode", NULL);
if (mode && !strcmp(mode, "peripheral")) {
setbits8(&bcsr[13], BCSR13_nUSBVCC);
qe_usb_clock_set(QE_CLK21, 48000000);
} else {
setbits8(&bcsr[13], BCSR13_USBMODE);
/*
* The BCSR GPIOs are used to control power and
* speed of the USB transceiver. This is needed for
* the USB Host only.
*/
simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
}
of_node_put(np);
err:
iounmap(bcsr);
return ret;
}
machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
#endif /* CONFIG_QE_USB */
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc836x_mds_probe(void)
{
return of_machine_is_compatible("MPC836xMDS");
}
define_machine(mpc836x_mds) {
.name = "MPC836x MDS",
.probe = mpc836x_mds_probe,
.setup_arch = mpc836x_mds_setup_arch,
.init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
|
