| Age | Commit message (Collapse) | Author |
|---|
|
When the size of a transfer exceeds the size of the FIFO (32 bytes), RX
overflows will be generated and receive data will be corrupted and
warnings will be produced. For example, here's an error generated by a
transfer of 36 bytes:
spi_master spi0: mchp_corespi_interrupt: RX OVERFLOW: rxlen: 4, txlen: 0
The driver is currently split between handling receiving in the
interrupt handler, and sending outside of it. Move all handling out of
the interrupt handling, and explicitly link the number of bytes read of
of the RX FIFO to the number written into the TX one. This both resolves
the overflow problems as well as simplifying the flow of the driver.
CC: stable@vger.kernel.org
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250303-veal-snooper-712c1dfad336@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/spi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
The change for the spi-npcm-fiu stands out in the diffstat because the
inconsistent formatting style of the platform_driver initializer is
fixed to match the other struct initializer in the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240925113501.25208-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current implementation only supports a word size of 8 bits,
which limits the devices it can be used with. Add support for any
word size between 1 and 32 bits, as supported by the hardware.
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-cogwheel-uniquely-0d4ef518b809@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While transmitting with rx_len == 0, the RX FIFO is not going to be
emptied in the interrupt handler. A subsequent transfer could then
read crap from the previous transfer out of the RX FIFO into the
start RX buffer. The core provides a register that will empty the RX and
TX FIFOs, so do that before each transfer.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-flammable-provoke-459226d08e70@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mchp_corespi_init() reads the CONTROL register, sets the master and
motorola bits, but doesn't write the value back to the register. The
function also doesn't ensure the controller is disabled at the start,
which may present a problem if the controller was used by an
earlier boot stage as some settings (including the mode) can only be
modified while the controller is disabled.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-designing-thus-05f7c26e1da7@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
requires it
Setting up many of the registers for a new SPI transfer involves
unconditionally disabling the SPI controller, writing the register
value and re-enabling the controller. This is being done for registers
even when the value is unchanged and is also done for registers that
don't require the controller to be disabled for the change to take
effect. Make an effort to detect changes to the register values, and
only disables the controller if the new register value is different
and disabling the controller is required. This stops the controller
being repeated disabled and the bus going tristate before every
transfer.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-depict-twirl-7e592eeabaad@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TX FIFO
Setting up many of the registers for a new SPI transfer requires the
SPI controller to be disabled after set_cs() has been called to assert
the chip select line. However, disabling the controller results in the
SCLK and MOSI output pins being tristate, which can cause clock
transitions to be seen by a slave device whilst SS is active. To fix
this, the CS is only set to inactive inline, whilst setting it active
is deferred until all registers are set up and the any controller
disables have been completed.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-sanitizer-recant-dd96b7a97048@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is possible for the TXDONE interrupt be raised if the tx FIFO becomes
temporarily empty while transmitting, resulting in recursive calls to
mchp_corespi_write_fifo() and therefore a garbage message might be
transmitted depending on when the interrupt is triggered. Moving all of
the tx FIFO writes out of the TXDONE portion of the interrupt handler
avoids this problem.
Most of rest of the TXDONE portion of the handler is problematic too.
Only reading the rx FIFO (and finalising the transfer) when the TXDONE
interrupt is raised can cause the transfer to stall, if the final bytes
of rx data are not available in the rx FIFO when the final TXDONE
interrupt is raised. The transfer should be finalised regardless of
which interrupt is raised, provided that all tx data has been set and
all rx data received.
The first issue was encountered "in the wild", the second is
theoretical.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-candied-deforest-585685ef3c8a@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPI "hard" controller within the PolarFire SoC is capable of
handling eight CS lines, but only one CS line is wired. Therefore, use
GPIO descriptors to configure additional CS lines.
Signed-off-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://msgid.link/r/20240514104508.938448-4-prajna.rajendrakumar@microchip.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPI "hard" controller in PolarFire SoC has eight CS lines, but only
one CS line is wired. When the 'num-cs' property is not specified in
the device tree, the driver defaults to the MAX_CS value, which has
been fixed to 1 to match the hardware configuration; however, when the
'num-cs' property is explicitly defined in the device tree, it
overrides the default value.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240514104508.938448-3-prajna.rajendrakumar@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Li Zetao <lizetao1@huawei.com>:
Commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks") provides a new helper function for prepared and
enabled clocks when a driver keeps a clock prepared (or enabled) during
the whole lifetime of the driver. So where drivers get clocks and enable
them immediately, it can be combined into a single function
devm_clk_get_*(). Moreover, the unprepare and disable function
has been registered to devm_clk_state, and before devm_clk_state is
released, the clocks will be unprepareed and disable, so it is unnecessary
to unprepare and disable clocks explicitly when remove drivers or in the
error handling path.
|
|
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230823133938.1359106-19-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230823033003.3407403-7-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refering to platform_get_irq()'s definition, the return value has
already been checked if ret < 0, and printed via dev_err_probe().
Calling dev_err_probe() one more time outside platform_get_irq()
is obviously redundant.
Furthermore, platform_get_irq() will never return irq equals 0,
removing spi->irq == 0 checking to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230728075729.3451867-1-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver
Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi
Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver
Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part
Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303172041.2103336-38-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function mchp_corespi_enable() is defined in the spi-microchip-core.c
file, but not called elsewhere, so delete this unused function.
drivers/spi/spi-microchip-core.c:122:20: warning: unused function 'mchp_corespi_enable'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2418
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221017092141.9789-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dev_err_probe() already prints the error code in a human readable way, so
there is no need to duplicate it as a numerical value at the end of the
message.
Moreover, in the case of devm_clk_get() it would only display '0' because
'ret' is know to be 0 at this point.
Fixes: cdeaf3a99a02 ("spi: microchip-core: switch to use dev_err_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/fb894ecec68e03fb7fc9353027c8b1a2610833d7.1659735153.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use dev_err_probe() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220713025657.3524506-4-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use devm_spi_alloc_master() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220713025657.3524506-3-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using devm_spi_register_master(), the unregister function will
be called in devres_release_all() which is called after ->remove(),
so remove spi_unregister_master() andspi_master_put().
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220713025657.3524506-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is possible that the error case for devm_clk_get() returns NULL,
in which case zero will be passed to PTR_ERR() as shown by the Smatch
static checker warning:
drivers/spi/spi-microchip-core.c:557 mchp_corespi_probe()
warn: passing zero to 'PTR_ERR'
Remove the NULL check and carry on with a dummy clock in case of an
error. To avoid a potential div zero, abort calculating clkgen if
clk_get_rate(spi->clk) is zero.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/linux-spi/20220615091633.GI2168@kadam/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220615142028.2991915-1-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If platform_get_irqi() returns 0, the error case will be triggered but
probe() will return 0 rather than an error. Ape the other drivers using
this pattern and return -ENXIO.
Reported-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/linux-spi/20220609055533.95866-2-yang.lee@linux.alibaba.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Link: https://lore.kernel.org/r/20220614065809.1969177-1-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mchp_corespi_probe()
Fix the unreasonable clk_prepare_enable() with clk_disable_unprepare()
before return from mchp_corespi_probe() in the error handling case.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220611021117.40494-1-wupeng58@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove .owner field if calls are used which set it automatically.
Eliminate the following coccicheck warning:
./drivers/spi/spi-microchip-core.c:624:3-8: No need to set .owner here.
The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220609055533.95866-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for Microchip FPGA SPI controllers, specifically
supporting the "hard" controllers on PolarFire SoC.
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220607073833.2331539-2-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
