| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- Support for Mobileye EyeQ6Lplus
- Cleanups and fixes
* tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS/mtd: Handle READY GPIO in generic NAND platform data
MIPS/input: Move RB532 button to GPIO descriptors
MIPS: validate DT bootargs before appending them
MIPS: Alchemy: Remove unused forward declaration
MAINTAINERS: Mobileye: Add EyeQ6Lplus files
MIPS: config: add eyeq6lplus_defconfig
MIPS: Add Mobileye EyeQ6Lplus evaluation board dts
MIPS: Add Mobileye EyeQ6Lplus SoC dtsi
clk: eyeq: Add Mobileye EyeQ6Lplus OLB
clk: eyeq: Adjust PLL accuracy computation
clk: eyeq: Skip post-divisor when computing PLL frequency
pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB
pinctrl: eyeq5: Use match data
reset: eyeq: Add Mobileye EyeQ6Lplus OLB
MIPS: Add Mobileye EyeQ6Lplus support
dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB
dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC
MIPS: dts: loongson64g-package: Switch to Loongson UART driver
mips: pci-mt7620: rework initialization procedure
mips: pci-mt7620: add more register init values
...
|
|
Declare the two reset domains found in the EyeQ6Lplus OLB and add
them to the data matched by 'mobileye,eyeq6lplus-olb' compatible.
Those reset domains are identical to those present in the EyeQ5
OLB, so no changes are needed to support them.
Also select reset-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux into clk-tenstorrent
Pull Tenstorrent clk driver updates from Drew Fustini:
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC
* tag 'tenstorrent-clk-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu
|
|
Reset controller fixes for v7.0, part 2
* Decouple spacemit K3 reset lines that were incorrectly coupled
together as one, but are in fact separate resets in hardware.
* Fix a double free in the reset_add_gpio_aux_device() error path.
This has already been fixed on reset/next by commit a9b95ce36de4
("reset: gpio: add a devlink between reset-gpio and its consumer").
* Fix the MODULE_AUTHOR string in the rzg2l-usbphy-ctrl driver.
We merge this into reset/next to resolve a conflict between commits
a9b95ce36de4 ("reset: gpio: add a devlink between reset-gpio and its
consumer") and fbffb8c7c7bb ("reset: gpio: fix double free in
reset_add_gpio_aux_device() error path").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The RZ/V2H USB2 PHY requires control of the VBUS selection line
(VBENCTL) through a mux controller described in the device tree as
"mux-controller". This change adds support for registering the
rzv2h-usb-vbenctl auxiliary driver during probe.
This enables proper management of USB2.0 VBUS source selection on
platforms using the RZ/V2H SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Replace raw MMIO accesses (readl/writel) with regmap_read() and
regmap_multi_reg_write() via devm_regmap_init_mmio().
Drop the manual spinlock as regmap provides internal locking.
Replace the custom rzv2h_usb2phy_regval struct with the standard
reg_sequence, and encode assert/deassert sequences as reg_sequence
arrays rather than individual scalar fields in the of_data
descriptor.
Use the reg_sequence .delay_us field to encode the 11 µs post-assert
delay, replacing the explicit usleep_range(11, 20) call in
rzv2h_usbphy_reset_assert().
Select REGMAP_MMIO in Kconfig.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Drop unnecessary double quote.
Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/acJbYxKGAB4lxGQr@duo.ucw.cz
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver was disabling the USB2 PHY clock immediately after register
initialization in probe() and after each reset operation. This left the
PHY unclocked even though it must remain active for USB functionality.
The behavior appeared to work only when another driver
(e.g., USB controller) had already enabled the clock, making operation
unreliable and hardware-dependent. In configurations where this driver
is the sole clock user, USB functionality would fail.
Fix this by:
- Enabling the clock once in probe() via pm_runtime_resume_and_get()
- Removing all pm_runtime_put() calls from assert/deassert/status
- Registering a devm cleanup action to release the clock at removal
- Removed rzv2h_usbphy_assert_helper() and its call in
rzv2h_usb2phy_reset_probe()
This ensures the PHY clock remains enabled for the entire device lifetime,
preventing instability and aligning with hardware requirements.
Cc: stable@vger.kernel.org
Fixes: e3911d7f865b ("reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Instead of grouping several different reset lines into one composite
reset, decouple them to individual ones which make it more aligned
with underlying hardware. And for DWC USB driver, it will match well
with the number of the reset property in the DT bindings.
The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
Also three reset lines each for UCIE and RCPU block.
As an agreement with maintainer, the reset IDs has been rearranged as
contiguous number but keep most part unchanged to avoid break patches
which already sent to mailing list. The changes of DT binding header file
and reset driver are merged together as one single commit to avoid
git-bisect breakage.
Fixes: 938ce3b16582 ("reset: spacemit: Add SpacemiT K3 reset driver")
Fixes: 216e0a5e98e5 ("dt-bindings: soc: spacemit: Add K3 reset support and IDs")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
When __auxiliary_device_add() fails, reset_add_gpio_aux_device()
calls auxiliary_device_uninit(adev).
The device release callback reset_gpio_aux_device_release() frees
adev, but the current error path then calls kfree(adev) again,
causing a double free.
Keep kfree(adev) for the auxiliary_device_init() failure path, but
avoid freeing adev after auxiliary_device_uninit().
Fixes: 5fc4e4cf7a22 ("reset: gpio: use software nodes to setup the GPIO lookup")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix a malformed MODULE_AUTHOR macro in the RZ/G2L USBPHY control driver
where the author's name and opening angle bracket were missing, leaving
only the email address with a stray closing >. Correct it to the standard
Name <email> format.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Simplify allocation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix a logic bug in reset_controller_register() where we set
fwnode_reset_n_cells to 1 if fwnode is set and fwnode_xlate is not but
we do it after assigning of_fwnode_handle(of_node) to fwnode.
Modify the logic to: assign fwnode from of_node if applicable, if fwnode
is still not set, try to get it from the device and only then check
of_xlate and fwnode_xlate and either assign fwnode_reset_n_cells from OF
or default to fwnode_reset_simple_xlate and fwnode_reset_n_cells = 1.
Fixes: ba8dbbb14b7e ("reset: convert the core API to using firmware nodes")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/0b72286b-33dd-4bc9-8c0e-161c2f4baed8@sirena.org.uk/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Correct an accidental whitespace change.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603100730.J3pi4xqi-lkp@intel.com/
Fixes: 9035073d0ef1 ("reset: convert reset core to using firmware nodes")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Adds Atlantis Reset Controller driver, which shares the same regmap as
prcm ( clock controller).
This version of the reset controller driver covers resets from the RCPU
prcm.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With reset core now being able to work with firmware nodes, we can make
reset-gpio node-agnostic and drop any OF dependencies.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With everything else now in place, we can convert the remaining parts of
the reset subsystem to becoming fwnode-agnostic - meaning it will work
with all kinds of firmware nodes, not only devicetree.
To that end: extend struct reset_controller_dev with fields taking
information relevant for using firmware nodes (which mirrors what we
already do for OF-nodes) and limit using of_ APIs only to where it's
absolutely necessary (mostly around the of_xlate callback).
For backward compatibility of existing drivers we still support OF-nodes
but firmware nodes become the preferred method.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
In order to simplify the commit converting the internals of reset core
to using firmware nodes, first convert the user-facing API. Modify the
signature of the core consumer functions but leave the specialized
wrappers as is to avoid modifying users for now.
No functional change intended.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Start the conversion of reset core to using firmware nodes by reworking
of_reset_control_get_count(). Unfortunately there is no fwnode-based
alternative to of_count_phandle_with_args() so we have to hand-code it.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently we use a single, global mutex - misleadingly names
reset_list_mutex - to protect the global list of reset devices,
per-controller list of reset control handles and also internal fields of
struct reset_control. Locking can be made a lot more fine-grained if we
use a separate mutex for serializing operations on the list AND
accessing the reset control handle.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently we use a single, global mutex - misleadingly names
reset_list_mutex - to protect the global list of reset devices,
per-controller list of reset control handles and also internal fields of
struct reset_control. Locking can be made a lot more fine-grained if we
use a separate mutex for serializing operations on the list AND
accessing the reset controller device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Except for the reset-gpio, all reset drivers use device tree - and as
such - benefit from the device links set up by driver core. This means,
that no reset supplier will be unbound before all its consumers have
been. For this reason, nobody bothered making the reset core resiliant
to the object life-time issues that are plagueing the kernel. In this
case: reset control handles referencing the reset provider device with
no serialization or NULL-pointer checking.
We now want to make the reset core fwnode-agnostic but before we do, we
must make sure it can survive unbinding of suppliers with consumers
still holding reset control handles.
To that end: use SRCU to protect the rcdev pointer inside struct
reset_control. We protect all sections using the pointer with SRCU
read-only critical sections and synchronize SRCU after every
modification of the pointer.
This is in line with what the GPIO subsystem does and what the proposed
revocable API tries to generalize. When and if the latter makes its way
into the kernel, reset core could potentially also be generalized to use
it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Simplify the locking code in reset core by using lock guard from
linux/cleanup.h.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
We don't need to know the IDA value outside of the function that creates
the auxiliary reset-gpio device. Simplify error handling by folding it
into reset_create_gpio_aux_device().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
While we implement an empty .release() callback for reset-gpio (driver
core requires it), this function will never actually be called as nobody
ever removes the device and the last reference is not dropped anywhere.
This is by design - once created, the reset-gpio device stays in memory.
Make the .release() callback emit a warning, should it ever be called
due to a programming bug.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
There's no user of the driver data so don't needlessly assign it.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The of_args field of struct reset_controller_dev was introduced to allow
the reset-gpio driver to pass the phandle arguments back to reset core.
The thing is: it doesn't even have to do it. The core sets the platform
data of the auxiliary device *AND* has access to it later on during the
lookup. This means the field is unneeded and all can happen entirely in
reset core.
Remove the field from the public header and don't set it in
reset-gpio.c. Retrieve the platform data in reset core when needed
instead.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The device that requests the reset control managed by the reset-gpio
device is effectively its consumer but the devlink is only established
between it and the GPIO controller exposing the reset pin. Add a devlink
between the consumer of the reset control and its supplier. This will
allow us to simplify the GPIOLIB code managing shared GPIOs when
handling the corner case of reset-gpio and gpiolib-shared interacting.
While at it and since we need to store the address of the auxiliary
device: don't allocate memory for the device separately but fold it into
struct reset_gpio_lookup instead.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
priv->rc.of_node is never set in reset core. Even if it were: tasking
the reset-gpio driver with controlling the reference count of an OF node
set up in reset core is a weird inversion of responsability. But it's
also wrong in that the underlying device never actually gets removed so
the node should not be put at all and especially not at driver detach.
Remove the devres action.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block and to
later unregister the handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The pwrrdy regmap_filed is allocated in rzg2l_usbphy_ctrl_pwrrdy_init()
only if the driver data is set to RZG2L_USBPHY_CTRL_PWRRDY. Check that
pwrrdy is valid before using it to avoid "Unable to handle kernel NULL
pointer dereference at virtual address" errors.
Fixes: c5b7cd9adefc ("reset: rzg2l-usbphy-ctrl: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add support for the SpacemiT K3 SoC reset controller. The K3 reset
driver reuses the common reset controller code and provides K3-specific
reset data for devices managed by the following units:
- MPMU (Main Power Management Unit)
- APBC (APB clock unit)
- APMU (Application Subsystem Power Management Unit)
- DCIU (DMA Control and Interface Unit)
Acked-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Extract the common reset controller code from the K1 driver into
separate reset-spacemit-common.{c,h} files to prepare for additional
SpacemiT SoCs that share the same reset controller architecture.
The common code includes handlers for reset assert and deassert
operations and probing for auxiliary bus devices.
Changes during extraction:
- Module ownership: Use dev->driver->owner instead of THIS_MODULE in
spacemit_reset_controller_register() to correctly reference the
calling driver's module.
- Rename spacemit_reset_ids to spacemit_k1_reset_ids.
- Define new namespace "RESET_SPACEMIT" for the exported common
functions (spacemit_reset_probe) and update K1 driver to import it.
This prepares for additional SpacemiT SoCs (K3) that share the same reset
controller architecture.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.
Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.
Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.
Also sort the drivers/reset/Kconfig entries alphabetically.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
|
|
The driver doesn't use any symbols depending on CONFIG_OF, so drop the
dependency. Also, enable it by default when ARCH_CANAAN is selected.
Fixes: 360a7a647759 ("reset: canaan: add reset driver for Kendryte K230")
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The RZ/G2L USBPHY control driver is also used on the RZ/G3S SoC.
The RZ/G3S SoC supports a power-saving mode in which power to most USB
components (including the USBPHY control block) is turned off. Because of
this, the USBPHY control block needs to be reconfigured when returning
from power-saving mode.
Add suspend/resume support to handle runtime suspend/resume of the device,
assert/deassert the reset signal, and reinitialize the USBPHY control
block.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
regmap_field_update_bits()
Propagate the return value of regmap_field_update_bits() to avoid losing
any possible error. With this, the return type of
rzg2l_usbphy_ctrl_set_pwrrdy() was updated accordingly.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
gpiod_set_value_cansleep() now returns an integer and can indicate
failures. Propagate the return value to the caller of the reset API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Support i.MX8ULP's SIM LPAV by adding its reset map definition.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
