| Age | Commit message (Collapse) | Author |
|---|
|
The UART used for the Bluetooth HCI on the Vexia EDU ATLA 10 is enumerated
as a PCI device, but the ODBA7823 ACPI fwnode for the HCI expects it to
use the more standard ACPI enumeration mode.
So Bluetooth does not work out of the box. Add x86_serdev_info to make
the x86-android-tablets manually associate the fwnode with the UART.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204204227.95757-9-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
by PCI parent
On the Vexia EDU ATLA 10 tablet, which ships with Android + a custom Linux
(guadalinex) using the custom Android kernel the UART controllers are not
enumerated as ACPI devices as they typically are.
Instead they are enumerated through PCI and getting the serdev-controller
by ACPI HID + UID does not work.
Add support for getting the serdev-controller by the PCI devfn of its
parent instead.
This also renames the use_pci_devname flag to use_pci since the former
name now no longer is accurate.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204204227.95757-8-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit 06f876def346 ("platform/x86: x86-android-tablets: Add support for
Vexia EDU ATLA 10 tablet") omitted the static keyword from some variables
which are only used inside other.c .
Add the missing static keyword to these, this fixes the following warnings:
.../x86-android-tablets/other.c:605:12: sparse: sparse: symbol 'crystal_cove_pwrsrc_psy' was not declared. Should it be static?
.../x86-android-tablets/other.c:612:28: sparse: sparse: symbol 'vexia_edu_atla10_ulpmc_node' was not declared. Should it be static?
Fixes: 06f876def346 ("platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411301001.1glTy7Xm-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204204227.95757-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
|
|
Add support for the Vexia EDU ATLA 10 tablet, Android 4.2/4.4 + Guadalinex
Ubuntu tablet distributed to schools in the Spanish Andalucía region.
Besides the usual broken DSDT issues this tablet is special because all
its LPSS island peripherals are enumerated as PCI devices rather then as
ACPI devices as they typically are.
At the same time there are disabled (_STA=0) ACPI devices for
the peripherals and child ACPI devices for e.g. attached I2C/SDIO devices
are children of these disabled ACPI devices and thus will not be used
by Linux since the parent is disabled.
So besides the usual manual i2c-client instantiation for accel/touchscreen
this tablet also requires manual i2c-client instantiation for the codec
and for the PMIC.
Also it seems the mainboard was designed for Windows not Android, so
it has an I2C attached embedded controller instead of allowing direct
access to the charger + fuel-gauge chips as is usual with Android boards.
Normally when there is an embedded controller, there also is ACPI battery
support, but since this shipped with Android that is missing and Linux
needs to have a power_supply class driver talking directly to the EC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104200848.58693-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
buttons LED
The "input-events" LED trigger used to turn on the backlight LEDs had to
be rewritten to use led_trigger_register_simple() + led_trigger_event()
to fix a serious locking issue.
This means it no longer supports using blink_brightness to set a per LED
brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME.
Adjust the MiPad 2 bottom bezel touch buttons LED class device to match:
1. Make LED_FULL the maximum brightness to fix the LED brightness
being very low when on.
2. Set flags = LED_CORE_SUSPENDRESUME.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240916090255.35548-1-hdegoede@redhat.com
|
|
Fix spelling across comments (besides obvious grammar issues):
- spell words in full, e.g., 'img' --> 'image'
- refer to 'gpio-keys' consistently
- refer to acpi_power_off() clearly as to function
- make sure that the first line is only for the affected model(s)
- miscellaneous improvements
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240902150625.2722187-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
bezel touch buttons
The Xiaomi [Mi]Pad 2 has 3 menu / home / back capacitive touch-buttons
on its bottom bezel. These are backlit by LEDs attached to a TPS61158 LED
controller which is controlled by the "pwm_soc_lpss_2" PWM output.
Create a LED class device for this, using the new input-events trigger
as default trigger so that the buttons automatically light up on any
input activity.
Note alternatively a "leds_pwm" platform device could be created together
with the necessary fwnode_s_ and a fwnode link to the PWM controller.
There are 2 downsides to this approach:
1. The code would still need to pwm_get() the PWM controller to get/attach
a fwnode for the PWM controller fwnode link and setting up the necessary
fwnodes is non-trivial. So this would likely require more code then simply
registering the LED class device directly.
2. Currently the leds_pwm driver and its devicetree bindings do not support
limiting the maximum dutycycle to less then 100% which is required in this
case (the leds_pwm driver can probably be extended to allow this).
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240509141207.63570-2-hdegoede@redhat.com
|
|
Xiaomi pad2 RGB LED fwnode updates:
1. Set "label" instead "function" to change the LED classdev name from
"rgb:indicator" to "mipad2:rgb:indicator" to match the usual
triplet name format for LED classdevs.
2. Set the trigger to the new "bq27520-0-charging-orange-full-green"
powersupply trigger type for multi-color LEDs.
3. Put the fwnode link for red before green in ktd2026_node_group[] so that
multi_index becomes "red green blue".
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240504164105.114017-8-hdegoede@redhat.com
|
|
Pass a struct device pointer for x86_android_tablet_device to the board
specific init() functions, so that these functions can use this for
e.g. devm_*() functions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240509141207.63570-1-hdegoede@redhat.com
|
|
There is a KTD2026 LED controller to manage the indicator LED for Xiaomi
pad2. The ACPI for it is not properly made so the kernel can't get
a correct description of it.
This work adds a description for this RGB LED controller and also sets
a trigger to indicate the charging event (bq27520-0-charging). When it
is charging, the indicator LED will be turned on.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Link: https://lore.kernel.org/r/20240322033736.9344-2-hpa@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.
Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
|
|
Refactor x86_android_tablet_get_gpiod() to no longer use
gpiolib private functions like gpiochip_find().
As a bonus this allows specifying that the GPIO is active-low,
like the /CE (charge enable) pin on the bq25892 charger on
the Lenovo Yoga Tablet 3.
Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Closes: https://lore.kernel.org/platform-driver-x86/20230905185309.131295-12-brgl@bgdev.pl/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-7-hdegoede@redhat.com
|
|
Remove the invalid_aei_gpiochip setting from the x86_dev_info
for the Peaq C1010.
This is no longer necessary since there now is a quirk to ignore
the "dolby" button GPIO in gpiolib_acpi_quirks[] in
drivers/gpio/gpiolib-acpi.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-4-hdegoede@redhat.com
|
|
Cyberbook T116
The Cyberbook T116 rugged tablet comes in both Windows and Android versions
and even on the Android version the DSDT is mostly sane. This tablet has
2 extra general purpose buttons in the row with the power + volume-buttons,
labeled P and F.
Use the x86-android-tablets infra to create a gpio-button device for these
2 extra buttons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230505205901.42649-2-hdegoede@redhat.com
|
|
Modify the gpio_keys support in x86_android_tablet_init() for
tablets which have more then 1 key/button which needs to be handled
by the gpio_keys driver.
This requires copying over the struct gpio_keys_button from
the x86_gpio_button struct array to a new gpio_keys_button struct array,
as an added benefit this allows marking the per model x86_gpio_button
arrays __initconst so that they all can be freed after module init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230505205901.42649-1-hdegoede@redhat.com
|
|
The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Note the Ares 8A is the Cherry Trail (CHT) model, the regular Ares 8
is Bay Trail (BYT) based and was already supported. This also updates
the comments for the BYT model to point out this is the BYT model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230429105057.7697-3-hdegoede@redhat.com
|
|
settings
Since commit 5adc409340b1 ("ACPI: x86: Introduce an
acpi_quirk_skip_gpio_event_handlers() helper") the ACPI GPIO code will
not register any GPIO event handlers at all for devices which have
the ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS set in their DMI table entry
in drivers/acpi/x86/utils.c .
This includes the Nextbook Ares 8 and the Asus ME176C and TF103C models,
so x86-android-tablets no longer needs to disable the GPIO event handlers
on these, since they have never been registered at all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230429105057.7697-2-hdegoede@redhat.com
|
|
C1010
The Peaq C1010 tablet has a special "Dolby" button. This button has
a WMI interface, but this is broken in several ways:
1. It only supports polling
2. The value read on polling goes from 0 -> 1 for one poll on both edges
of the button, with no way to tell which edge causes the poll to
return 1.
3. It uses a non unique GUID (it uses the Microsoft docs WMI example GUID).
There currently is a WMI driver for this, but it uses several kludges
to work around these issues and is not entirely reliable due to 2.
Replace the unreliable WMI driver by using the x86-android-tablets code
to instantiate a gpio_keys device for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-11-hdegoede@redhat.com
|
|
x86_android_tablet_init()
Add gpio_keys instantation support to x86_android_tablet_init(), to avoid
this having to be repeated in various x86_dev_info.init() functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-10-hdegoede@redhat.com
|
|
All that remains now in x86-android-tablets-main.c is info for other
(non Asus / Lenovo) tablets. Rename it to other.c to reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-9-hdegoede@redhat.com
|
