summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbevf
AgeCommit message (Collapse)Author
2026-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-7.1-rc5). No conflicts, adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c cc199cd1b912 ("net/mlx5e: Reduce branches in napi poll") c326f9c68921 ("net/mlx5e: xsk: Fix unlocked writing to ICOSQ") drivers/net/ethernet/mellanox/mlx5/core/eswitch.c c6df9a65cbb0 ("net/mlx5: Skip disabled vports when setting max TX speed") 1fba57c91416 ("net/mlx5: Add VHCA_ID page management mode support") net/mac80211/mlme.c a6e6ccd5bd07 ("wifi: mac80211: consume only present negotiated TTLM maps") 49e62ec6eb06 ("wifi: mac80211: move frame RX handling to type files") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-18ixgbevf: fix use-after-free in VEPA multicast source pruningMichael Bommarito
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-12net: Consistently define pci_device_ids using named initializersUwe Kleine-König (The Capable Hub)
... and PCI device helpers. The various struct pci_device_id arrays were initialized mostly by one the PCI_DEVICE macros and then list expressions. The latter isn't easily readable if you're not into PCI. Using named initializers is more explicit and thus easier to parse. Also use PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and .subdevice where appropriate and skip explicit assignments of 0 (which the compiler takes care of). The secret plan is to make struct pci_device_id::driver_data an anonymous union (similar to https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/) and that requires named initializers. But it's also a nice cleanup on its own. This change doesn't introduce changes to the compiled pci_device_id arrays. Tested on x86 and arm64. Reviewed-by: Jijie Shao <shaojijie@huawei.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2) Reviewed-by: Michael Grzeschik <mgr@kernel.org> Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-06ixgbevf: add missing negotiate_features op to Hyper-V ops tableMichal Schmidt
Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") added the .negotiate_features callback to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL on Hyper-V VMs. During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(), which unconditionally dereferences hw->mac.ops.negotiate_features(). On Hyper-V this results in a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...] Workqueue: events work_for_cpu_fn RIP: 0010:0x0 [...] Call Trace: ixgbevf_negotiate_api+0x66/0x160 [ixgbevf] ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf] ixgbevf_probe+0x20f/0x4a0 [ixgbevf] local_pci_probe+0x50/0xa0 work_for_cpu_fn+0x1a/0x30 [...] Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP gracefully. Fixes: a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Reported-by: Xiaoqiang Xiong <xxiong@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-155455 Assisted-by: Claude:claude-4.6-opus-high Cursor Tested-by: Xiaoqiang Xiong <xxiong@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-02-28Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-02-19 (idpf, ice, i40e, ixgbevf, e1000e) For idpf: Li Li moves the check for software marker to occur after incrementing next to clean to avoid re-encountering the same packet. He also adds a couple of checks to prevent NULL pointer dereferences and NULLs rss_key, after free, in error path so that later checks are properly evaluated. Brian Vazquez adjusts IRQ naming to have correlation with netdev naming. Sreedevi removes validation of action type as part of ntuple rule deletion. For ice: Aaron Ma breaks RDMA initialization into two steps and adjusts calls so that VSIs are entirely configured before plugging. Michal Schmidt fixes initialization of loopback VSI to have proper resources allocated to allow for loopback testing to occur. For i40e: Thomas Gleixner fixes a leak of preempt count by replacing get_cpu() with smp_processor_id(). For ixgbevf: Jedrzej adds a check for mailbox version before attempting to call an associated link state call that is supported in that mailbox version. For e1000e: Vitaly clears power gating feature for Panther Lake systems to avoid packet issues. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: clear DPG_EN after reset to avoid autonomous power-gating e1000e: introduce new board type for Panther Lake PCH ixgbevf: fix link setup issue i40e: Fix preempt count leak in napi poll tracepoint ice: fix crash in ethtool offline loopback test ice: recap the VSI and QoS info after rebuild idpf: Fix flow rule delete failure due to invalid validation idpf: change IRQ naming to match netdev and ethtool queue numbering idpf: nullify pointers after they are freed idpf: skip deallocating txq group's txqs if it is NULL idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL idpf: increment completion queue next_to_clean in sw marker wait routine ==================== Link: https://patch.msgid.link/20260225211546.1949260-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-25ixgbevf: fix link setup issueJedrzej Jagielski
It may happen that VF spawned for E610 adapter has problem with setting link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates with PF driver which doesn't support this version of API, and hence doesn't support new approach for getting PF link data. In that case VF asks PF to provide link data but as PF doesn't support it, returns -EOPNOTSUPP what leads to early bail from link configuration sequence. Avoid such situation by using legacy VFLINKS approach whenever negotiated API version is less than 1.6. To reproduce the issue just create VF and set its link up - adapter must be any from the E610 family, ixgbevf must support API 1.6 or higher while ixgbevf must not. Fixes: 53f0eb62b4d2 ("ixgbevf: fix getting link speed data for E610 devices") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2025-11-27ixgbevf: ixgbevf_q_vector clean upNatalia Wochtman
Flex array should be at the end of the structure and use [] syntax Remove unused fields of ixgbevf_q_vector. They aren't used since busy poll was moved to core code in commit 508aac6dee02 ("ixgbevf: get rid of custom busy polling code"). Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Natalia Wochtman <natalia.wochtman@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20251125223632.1857532-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-26ixgbevf: extract GRXRINGS from .get_rxnfcBreno Leitao
Commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to optimize RX ring queries") added specific support for GRXRINGS callback, simplifying .get_rxnfc. Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new .get_rx_ring_count(). This simplifies the RX ring count retrieval and aligns ixgbevf with the new ethtool API for querying RX ring parameters. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20251125-gxring_intel-v2-7-f55cd022d28b@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbevf: fix mailbox API compatibility by negotiating supported featuresJedrzej Jagielski
There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/ Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code") Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbevf: fix getting link speed data for E610 devicesJedrzej Jagielski
E610 adapters no longer use the VFLINKS register to read PF's link speed and linkup state. As a result VF driver cannot get actual link state and it incorrectly reports 10G which is the default option. It leads to a situation where even 1G adapters print 10G as actual link speed. The same happens when PF driver set speed different than 10G. Add new mailbox operation to let the VF driver request a PF driver to provide actual link data. Update the mailbox api to v1.6. Incorporate both ways of getting link status within the legacy ixgbe_check_mac_link_vf() function. Fixes: 4c44b450c69b ("ixgbevf: Add support for Intel(R) E610 device") Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-19ixgbevf: fix proper type for error code in ixgbevf_resume()Aleksandr Loktionov
The variable 'err' in ixgbevf_resume() is used to store the return value of different functions, which return an int. Currently, 'err' is declared as u32, which is semantically incorrect and misleading. In the Linux kernel, u32 is typically reserved for fixed-width data used in hardware interfaces or protocol structures. Using it for a generic error code may confuse reviewers or developers into thinking the value is hardware-related or size-constrained. Replace u32 with int to reflect the actual usage and improve code clarity and semantic correctness. No functional change. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-08-18eth: intel: use vmalloc_array() to simplify codeQianfeng Rong
Remove array_size() calls and replace vmalloc() with vmalloc_array() to simplify the code and maintain consistency with existing kmalloc_array() usage. vmalloc_array() is also optimized better, resulting in less instructions being used. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Link: https://patch.msgid.link/20250816090659.117699-2-rongqianfeng@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25net: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18ixgbevf: remove unused fields from struct ixgbevf_adapterYuto Ohnuki
Remove hw_rx_no_dma_resources and eitr_param fields from struct ixgbevf_adapter since these fields are never referenced in the driver. Note that the interrupt throttle rate is controlled by the rx_itr_setting and tx_itr_setting variables. This change simplifies the ixgbevf driver by removing unused fields, which improves maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-16xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}Cosmin Ratiu
Previously, device driver IPSec offload implementations would fall into two categories: 1. Those that used xso.dev to determine the offload device. 2. Those that used xso.real_dev to determine the offload device. The first category didn't work with bonding while the second did. In a non-bonding setup the two pointers are the same. This commit adds explicit pointers for the offload netdevice to .xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free() which eliminates the confusion and allows drivers from the first category to work with bonding. xso.real_dev now becomes a private pointer managed by the bonding driver. Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-02-21xfrm: provide common xdo_dev_offload_ok callback implementationLeon Romanovsky
Almost all drivers except bond and nsim had same check if device can perform XFRM offload on that specific packet. The check was that packet doesn't have IPv4 options and IPv6 extensions. In NIC drivers, the IPv4 HELEN comparison was slightly different, but the intent was to check for the same conditions. So let's chose more strict variant as a common base. Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-01-07ixgbevf: Fix passing 0 to ERR_PTR in ixgbevf_run_xdp()Yue Haibing
ixgbevf_run_xdp() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in ixgbevf_clean_rx_irq(). Remove this error pointer handing instead use plain int return value. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-12-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07ixgbevf: Remove unused ixgbevf_hv_mbx_opsDr. David Alan Gilbert
The const struct ixgbevf_hv_mbx_ops was added in 2016 as part of commit c6d45171d706 ("ixgbevf: Support Windows hosts (Hyper-V)") but has remained unused. The functions it references are still referenced elsewhere. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250105122847.27341-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20ixgbevf: Add support for Intel(R) E610 devicePiotr Kwapulinski
Add support for Intel(R) E610 Series of network devices. The E610 is based on X550 but adds firmware managed link, enhanced security capabilities and support for updated server manageability Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-03ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5Jacob Keller
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") added support for v1.5 of the PF to VF mailbox communication API. This commit mistakenly enabled IPSEC offload for API v1.5. No implementation of the v1.5 API has support for IPSEC offload. This offload is only supported by the Linux PF as mailbox API v1.4. In fact, the v1.5 API is not implemented in any Linux PF. Attempting to enable IPSEC offload on a PF which supports v1.5 API will not work. Only the Linux upstream ixgbe and ixgbevf support IPSEC offload, and only as part of the v1.4 API. Fix the ixgbevf Linux driver to stop attempting IPSEC offload when the mailbox API does not support it. The existing API design choice makes it difficult to support future API versions, as other non-Linux hosts do not implement IPSEC offload. If we add support for v1.5 to the Linux PF, then we lose support for IPSEC offload. A full solution likely requires a new mailbox API with a proper negotiation to check that IPSEC is actually supported by the host. Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-10net: intel: Use *-y instead of *-objs in MakefileAndy Shevchenko
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04ixgbevf: Remove unused function declarationsYue Haibing
ixgbe_napi_add_all()/ixgbe_napi_del_all() are declared but never implemented in commit 92915f71201b ("ixgbevf: Driver main and ethool interface module and main header") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230803141904.15316-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-26ixgbevf: fill IPsec state validation failure reasonLeon Romanovsky
Rely on extack to return failure reason. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-26xfrm: extend add state callback to set failure reasonLeon Romanovsky
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-05xfrm: allow state packet offload modeLeon Romanovsky
Allow users to configure xfrm states with packet offload mode. The packet mode must be requested both for policy and state, and such requires us to do not implement fallback. We explicitly return an error if requested packet mode can't be configured. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23ixgbevf: Fix resource leak in ixgbevf_init_module()Shang XiaoJing
ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") Fixes: 40a13e2493c9 ("ixgbevf: Use a private workqueue to avoid certain possible hangs") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-04ixgbevf: Add error messages on vlan errorJan Sokolowski
ixgbevf did not provide an error in dmesg if VLAN addition failed. Add two descriptive failure messages in the kernel log. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30intel/ixgbevf:fix repeated words in commentsJilin Yuan
Delete the redundant word 'slot'. Delete the redundant word 'we'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06ixgbe: propagate XFRM offload state direction instead of flagsLeon Romanovsky
Convert the ixgbe driver to rely on XFRM offload state direction instead of flags bits that were not checked at all. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-08ixgbevf: add disable link stateSlawomir Mrozowicz
Add possibility to disable link state if it is administratively disabled in PF. It is part of the general functionality that allows the PF driver to control the state of the virtual link VF devices. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-23ixgbevf: clean up some inconsistent indentingYang Li
Eliminate the follow smatch warning: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:2756 ixgbevf_alloc_q_vector() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04ixgbevf: Require large buffers for build_skb on 82599VFSamuel Mendoza-Jonas
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb around new data in the page buffer shared with the ixgbe PF. This uses either a 2K or 3K buffer, and offsets the DMA mapping by NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to ensure the PF does not write a full 2K bytes into the buffer, which is actually 2K minus the offset. However on the 82599 virtual function, the RXDCTL mechanism is not available. The driver attempts to work around this by using the SET_LPE mailbox method to lower the maximm frame size, but the ixgbe PF driver ignores this in order to keep the PF and all VFs in sync[0]. This means the PF will write up to the full 2K set in SRRCTL, causing it to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer. With 4K pages split into two buffers, this means it either writes NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA mapping. Avoid this by only enabling build_skb when using "large" buffers (3K). These are placed in each half of an order-1 page, preventing the PF from writing past the end of the mapping. [0]: Technically it only ever raises the max frame size, see ixgbe_set_vf_lpe() in ixgbe_sriov.c Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27ixgbevf: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>