| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Syzbot reports [1] an uninitialized value issue found by KMSAN in
dib3000_read_reg().
Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case
that call fails, the buffer may end up with some undefined values.
Since no elaborate error handling is expected in dib3000_write_reg(),
simply zero out rb buffer to mitigate the problem.
[1] Syzkaller report
dvb-usb: bulk message failed: -22 (6/0)
=====================================================
BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31
dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline]
dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline]
dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310
dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110
...
Local variable rb created at:
dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54
dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
...
Fixes: 74340b0a8bc6 ("V4L/DVB (4457): Remove dib3000-common-module")
Reported-by: syzbot+c88fc0ebe0d5935c70da@syzkaller.appspotmail.com
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240517155800.9881-1-n.zhandarovich@fintech.ru
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
- uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in
uvc_parse_format
* tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- removal of the old omap4iss media driver
- mantis: remove orphan mantis_core.h
- add support for Raspberypi CFE
- uvc driver got a co-maintainer
- main media tree moved to git://linuxtv.org/media.git
- lots of driver cleanups, updates and fixes
* tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits)
docs: media: update location of the media patches
MAINTAINERS: update location of media main tree
media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer
media: platform: samsung: s5p-jpeg: Remove deadcode
media: qcom: camss: Add MSM8953 resources
media: dt-bindings: Add qcom,msm8953-camss
media: qcom: camss: implement pm domain ops for VFE v4.1
media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
media: adv7180: Also check for "adi,force-bt656-4"
media: dt-bindings: adv7180: Document 'adi,force-bt656-4'
media: mgb4: Fix inconsistent input/output alignment in loopback mode
media: replace obsolete hans.verkuil@cisco.com alias
Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc
media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls
media: atomisp: Add check for rgby_data memory allocation failure
media: atomisp: remove redundant re-checking of err
media: atomisp: Fix spelling errors reported by codespell
media: atomisp: Remove License information boilerplate
media: atomisp: Fix typos in comment
media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The only real core work we've got this time around is the completion
of the transition to the new host/target naming for the core APIs,
Kconfig still needs doing but that's a lot less invasive.
Otherwise the big changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging
helper in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers"
* tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
spi: imx: support word delay
spi: imx: pass struct spi_transfer to prepare_transfer()
spi: cs42l43: Add GPIO speaker id support to the bridge configuration
spi: Delete useless checks
spi: apple: Remove unnecessary .owner for apple_spi_driver
spi: spidev_test: add support for word delay
spi: apple: Add driver for Apple SPI controller
spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers
spi: Use of_property_present() for non-boolean properties
spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time
spi: spi-mem: rtl-snand: Correctly handle DMA transfers
spi: tegra210-quad: Avoid shift-out-of-bounds
spi: axi-spi-engine: Emit trace events for spi transfers
dt-bindings: spi: sprd,sc9860-spi: convert to YAML
spi: Replace deprecated PCI functions
spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi
spi: spi-mem: Add Realtek SPI-NAND controller
dt-bindings: spi: Add realtek,rtl9301-snand
spi: make class structs const
spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
|
|
uvc_parse_format
This can lead to out of bounds writes since frames of this type were not
taken into account when calculating the size of the frames buffer in
uvc_parse_streaming.
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Benoit Sevens <bsevens@google.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- dvb-core fixes for vb2 check and device registration
- v4l2-core: fix an issue with error handling for VIDIOC_G_CTRL
- vb2 core: fix an issue with vb plane copy logic
- videobuf2-core: copy vb planes unconditionally
- vivid: fix buffer overwrite when using > 32 buffers
- vivid: fix a potential division by zero due to an issue at v4l2-tpg
- some spectre vulnerability fixes
- several OOM access fixes
- some buffer overflow fixes
* tag 'media/v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2-core: copy vb planes unconditionally
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
media: vivid: fix buffer overwrite when using > 32 buffers
media: pulse8-cec: fix data timestamp at pulse8_setup()
media: cec: extron-da-hd-4k-plus: don't use -1 as an error code
media: stb0899_algo: initialize cfr before using it
media: adv7604: prevent underflow condition when reporting colorspace
media: cx24116: prevent overflows on SNR calculus
media: ar0521: don't overflow when checking PLL values
media: s5p-jpeg: prevent buffer overflows
media: av7110: fix a spectre vulnerability
media: mgb4: protect driver against spectre
media: dvb_frontend: don't play tricks with underflow values
media: dvbdev: prevent the risk of out of memory access
media: v4l2-tpg: prevent the risk of a division by zero
media: v4l2-ctrls-api: fix error handling for v4l2_g_ctrl()
media: dvb-core: add missing buffer index check
|
|
exynos3250_jpeg_operating() has been unused since it was added in 2014's
commit 3246fdaa0ac2 ("[media] s5p-jpeg: Add support for Exynos3250 SoC")
exynos4_jpeg_get_fifo_status(), exynos4_jpeg_get_frame_size(), and
exynos4_jpeg_set_timer_count() have been unused since they were added by
commit 80529ae5c137 ("[media] s5p-jpeg: JPEG codec")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This commit describes the hardware layout for the MSM8953
for the following hardware blocks:
- 2 x VFE, 3 RDI per VFE
- 3 x CSID
- 3 x CSI PHY
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
MSM8917 and MSM8953 have multiple VFE power-domains they
have to be powered on/off explicitly.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
fimc_md_is_isp_available
In fimc_md_is_isp_available(), of_get_child_by_name() is called to check
if FIMC-IS is available. Current code does not decrement the refcount of
the returned device node, which causes an OF node reference leak. Fix it
by calling of_node_put() at the end of the variable scope.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: e781bbe3fecf ("[media] exynos4-is: Add fimc-is subdevs registration")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added CC to stable]
|
|
According to adv7180.yaml, the correct property name is
"adi,force-bt656-4".
Expand the check to also test against the "adi,force-bt656-4" compatible
string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fixes broken output due to different input/output alignment in loopback
mode when the (last) input device is closed. Instead of on device close,
do the alignment synchronisation when starting the stream (and clear
it when streaming is stopped).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Stateful codecs must support the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT
and V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls. The vicodec driver
was missing support for these controls. Add them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Copy the relevant data from userspace to the vb->planes unconditionally
as it's possible some of the fields may have changed after the buffer
has been validated.
Keep the dma_buf_put(planes[plane].dbuf) calls in the first
`if (!reacquired)` case, in order to be close to the plane validation code
where the buffers were got in the first place.
Cc: stable@vger.kernel.org
Fixes: 95af7c00f35b ("media: videobuf2-core: release all planes first in __prepare_dmabuf()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Factor out common instance destruction code into
a common function.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When destroying an inst we should make sure that we don't race
against threaded IRQ (or pending IRQ), otherwise we can concurrently
kfree() inst context and inst itself.
BUG: KASAN: slab-use-after-free in vb2_queue_error+0x80/0x90
Call trace:
dump_backtrace+0x1c4/0x1f8
show_stack+0x38/0x60
dump_stack_lvl+0x168/0x1f0
print_report+0x170/0x4c8
kasan_report+0x94/0xd0
__asan_report_load2_noabort+0x20/0x30
vb2_queue_error+0x80/0x90
venus_helper_vb2_queue_error+0x54/0x78
venc_event_notify+0xec/0x158
hfi_event_notify+0x878/0xd20
hfi_process_msg_packet+0x27c/0x4e0
venus_isr_thread+0x258/0x6e8
hfi_isr_thread+0x70/0x90
venus_isr_thread+0x34/0x50
irq_thread_fn+0x88/0x130
irq_thread+0x160/0x2c0
kthread+0x294/0x328
ret_from_fork+0x10/0x20
Allocated by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_alloc_info+0x28/0x38
__kasan_kmalloc+0x84/0xa0
kmalloc_trace+0x7c/0x98
v4l2_m2m_ctx_init+0x74/0x280
venc_open+0x444/0x6d0
v4l2_open+0x19c/0x2a0
chrdev_open+0x374/0x3f0
do_dentry_open+0x710/0x10a8
vfs_open+0x88/0xa8
path_openat+0x1e6c/0x2700
do_filp_open+0x1a4/0x2e0
do_sys_openat2+0xe8/0x508
do_sys_open+0x15c/0x1a0
__arm64_sys_openat+0xa8/0xc8
invoke_syscall+0xdc/0x270
el0_svc_common+0x1ec/0x250
do_el0_svc+0x54/0x70
el0_svc+0x50/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Freed by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_free_info+0x3c/0x60
____kasan_slab_free+0x124/0x1a0
__kasan_slab_free+0x18/0x28
__kmem_cache_free+0x134/0x300
kfree+0xc8/0x1a8
v4l2_m2m_ctx_release+0x44/0x60
venc_close+0x78/0x130 [venus_enc]
v4l2_release+0x20c/0x2f8
__fput+0x328/0x7f0
____fput+0x2c/0x48
task_work_run+0x1e0/0x280
get_signal+0xfb8/0x1190
do_notify_resume+0x34c/0x16a8
el0_svc+0x9c/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Rearrange inst destruction. First remove the inst from the
core->instances list, second synchronize IRQ/IRQ-thread to
make sure that nothing else would see the inst while we take
it down.
Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
We destroy mutex-es too early as they are still taken in
v4l2_fh_exit()->v4l2_event_unsubscribe()->v4l2_ctrl_find().
We should destroy mutex-es right before kfree(). Also
do not vdec_ctrl_deinit() before v4l2_fh_exit().
Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files")
Suggested-by: Tomasz Figa <tfiga@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
HFI supports hierarchical P encoding and the ability to specify the
bitrate for the different layers.
Connect the controls that V4L2 provides and HFI supports.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Move the dynamic bitrate updating functionality to a separate function
so that it can be shared.
No functionality changes.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use runtime PM autosuspend function to avoid rapid power state bouncing.
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Switch from s_stream() to enable_streams() and disable_streams() pad
operations. They are preferred and required for streams support.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Port the ov5645 sensor driver to use the subdev active state.
Move all the format configuration to the subdevice state and simplify
the format handling, locking and initialization.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove the `power_lock` mutex used during control applications, as it is
only utilized in the .s_ctrl() function. Since the control framework
already serializes calls to this function, the mutex is unnecessary.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Utilize the v4l2_async_register_subdev_sensor() helper to register the
sub-device, as this facilitates parsing of firmware interfaces for remote
references.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Refactor error handling in the ov5645_probe() function by replacing
multiple dev_err() calls with dev_err_probe().
- Note that during this process, the error string "external clock
frequency %u is not supported" was replaced with "unsupported xclk
frequency %u" to ensure it wraps at 80 columns.
- Additionally, the error string for control initialization failure was
changed from "%s: control initialization error %d\n" to "failed to add
controls\n" as there is no need to print the function name and error code
in the string, since dev_err_probe() already provides this information.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
While assigning the subdev device pointer, use the local `dev` pointer
which is already extracted from the `i2c_client` pointer.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The DMA unmap API is not supposed to return value. Thus this patch
changes the ipu6_mmu_unmap() as a void function and DMA unmapping
didn't check the return value.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
[Sakari Ailus: Drop unnecessary returns.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The MMU mapping flow is optimized for improve the performance, the
unmapping flow could also be optimized to follow same flow.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
ipu6_mmu_map() operated on a per-page basis, it leads frequent
spin_lock/unlock() and clflush_cache_range() for each page, it
will cause inefficiencies especially when handling dma-bufs
with large number of pages. However, the pages are likely concentrated
pages by IOMMU DMA driver, IPU MMU driver can map the concentrated
pages into less entries in l1 table.
This change enhances ipu6_mmu_map() with batching process multiple
contiguous pages. It significantly reduces calls for spin_lock/unlock
and clflush_cache_range() and improve the performance.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
l2_map() and l2_unmap() are better to be grouped together.
l2_unmap() will soon be called from l2_map() for mapping
optimization.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
[Sakari Ailus: Rebase on debug print fixes on 32-bit.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Rename the pad field in __media_pipeline_start() to both better describe
what it is and avoid masking it during the loop.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The buttress ipc ish structure is not effectively used on IPU6 - data
is nullified on init. Remove the ish structure and handing of related
interrupts to cleanup the code.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When using buffers from DRM, DMA-API gives a warning about: "mapping sg
segment longer than device claims to support [len=307200] [max=65536]"
Add a call to vb2_dma_contig_set_max_seg_size() to tell the DMA-API
about the supported segment size (which is UINT_MAX).
Fixes: 6edb685abb2a ("media: raspberrypi: Add support for RP1-CFE")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Some IPU6 devices have shared interrupts. We need to handle properly
case when interrupt is triggered from other device on shared irq line
and IPU6 itself disabled. In such case we get 0xffffffff from
ISR_STATUS register and handle all irq's cases, for what we are not
not prepared and usually hang the whole system.
To avoid the issue use pm_runtime_get_if_active() to check if
the device is enabled and prevent suspending it when we handle irq
until the end of irq. Additionally use synchronize_irq() in suspend
Fixes: ab29a2478e70 ("media: intel/ipu6: add IPU6 buttress interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
2X.. mbus formats are related to parallel interface and
as such should not be acceptable on the sink pad of the bridge.
Only keep their csi counterpart in 1X..
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add handling of pm_runtime in order to control the supplies
and clocks of the bridge.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add pad enable_streams and disable_streams ops in addition to
v4l2_subdev_s_stream_helper. Moreover, use functions
v4l2_subdev_enable_streams and v4l2_subdev_disable_streams to
control the source subdev.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Following addition of cascaded s_stream call within
mipid02_stream_enable and mipid02_stream_disable,
the mipid02_stream_enable error handling must be fixed to simply
disable the clocks & data lanes without also calling
again the s_stream of the source subdev.
Moreover, main control registers are reset to 0 for all cases
of error within the mipid02_stream_enable even if they haven't yet
been written. Correct this behavior by simply returning an
error when register clear are not necessary.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Introduce enable_streams and disable_streams pad ops and
replace s_stream with the v4l2_subdev_s_stream_helper
function.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add new structure 'mt9p031_model_info' to encapsulate format codes for
the mt9p031 camera sensor family. This approach enhances code clarity
and maintainability.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
