| Age | Commit message (Collapse) | Author |
|---|
|
During capture time, the target job may be unavailable (e.g., if it's in
LR mode). However, the associated exec queue will be available
regardless, change xe_engine_snapshot_capture_for_job to take a queue
argument ann rename to xe_engine_snapshot_capture_for_queue.
v2:
- Reword commit message (Jonathan)
- Remove redundant queueu check (Zhanjun)
- Remove devcoredump job member (Zhanjun)
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-7-matthew.brost@intel.com
|
|
Save manual engine capture into capture list.
This removes duplicate register definitions across manual-capture vs
guc-err-capture.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-7-zhanjun.dong@intel.com
|
|
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
|
|
Export hw engine's mmio accessors. This is in preparation
to use these from eudebug code.
v2: s/hw_engine_mmio/xe_hw_engine_mmio (Matthew)
v3: kernel doc (Matthew)
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806153009.1081382-1-mika.kuoppala@linux.intel.com
|
|
Move and export xe_hw_engine lookup. This is in preparation
to use this in eudebug code where we want to find active
engine.
v2: s/tile/gt due to uapi changes (Mika)
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729130152.100130-1-mika.kuoppala@linux.intel.com
|
|
Per client engine utilization uses RING_TIMESTAMP to return
drm-total-cycles to the user. Current code uses XE_FW_GT to read this
register on the first available engine in a GT. When testing on DG2, it
is observed that this value is 0 when running test on some engines. To
resolve that, get the hwe domain specific FW for reading the engine
timestamp.
v2:
- update commit message
- use domain specific FW (Matt)
v3:
- Drop check for hwe in the helper (Matt, Michal)
v4:
- checkpatch fixes
v5: Rebase
Fixes: 188ced1e0ff8 ("drm/xe/client: Print runtime to fdinfo")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627235105.2631135-1-umesh.nerlige.ramappa@intel.com
|
|
Just like CTX_TIMESTAMP is used to calculate runtime, add a helper to
get the timestamp for the engine so it can be used to calculate the
"engine time" with the same unit as the runtime is recorded.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Move it out of the sysfs compilation unit so it can be re-used in other
places.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Allow preemption timeout to be specified as a config option.
v2: Change unit to microseconds (Tejas)
v3: Remove get_default_preempt_timeout()
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add sysfs entries for the min, max, and defaults for each of
engine scheduler controls for every hardware engine class.
Non-elevated user IOCTLs to set these controls must be within
the min-max ranges of the sysfs entries, elevated user can set
these controls to any value. However, introduced compile time
CONFIG min-max values which restricts elevated user to be in
compile time min-max range if at all sysfs min/max are violated.
Sysfs entries examples are,
DUT# cat /sys/class/drm/cardX/device/tileN/gtN/engines/ccs/.defaults/
job_timeout_max job_timeout_ms preempt_timeout_min timeslice_duration_max timeslice_duration_us
job_timeout_min preempt_timeout_max preempt_timeout_us timeslice_duration_min
DUT# cat /sys/class/drm/card1/device/tileN/gtN/engines/ccs/
.defaults/ job_timeout_min preempt_timeout_max preempt_timeout_us timeslice_duration_min
job_timeout_max job_timeout_ms preempt_timeout_min timeslice_duration_max timeslice_duration_us
V12:
- Rebase
V11:
- Make engine_get_prop_minmax and enforce_sched_limit static - Matt
- use enum in place of string in engine_get_prop_minmax - Matt
- no need to use enforce_sched_limit or no need to filter min/max
per user type in sysfs - Matt
V10:
- Add kernel doc for non-static func
- Make helper to get min/max for range validation - Matt
- Filter min/max per user type
V9 :
- Rebase to use s/xe_engine/xe_hw_engine/ - Matt
V8 :
- fix enforce_sched_limit and avoid code duplication - Niranjana
- Make sure min < max - Niranjana
V7 :
- Rebase to replace hw engine with eclass interface
- return EINVAL in place of EPERM
- Use some APIs to avoid code duplication
V6 :
- Rebase changes to reflect per engine class props interface - MattB
- Use #if ENABLED - MattB
- Remove MAX_SCHED_TIMEOUT check as range validation is enough
V5 :
- Rebase to resolve conflicts - CI
V4 :
- Rebase
- Update commit to reflect tile addition
- Use XE_HW macro directly as they are already filtered
for CONFIG checks - Niranjana
- Add CONFIG for enable/disable min/max limitation
on elevated user. Default is enable - Matt/Joonas
V3 :
- Resolve CI hooks warning for kernel-doc
V2 :
- Restric min/max setting to #define default min/max for
elevated user - Himal
- Remove unrelated changes from patch - Niranjana
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Addressing these Matthew comments:
- Handle memory allocation failures.
- Do not use GFP_ATOMIC on cases like debugfs prints.
- placement of @reg doc.
- identation issues.
v3: checkpatch
v4: Rebase and get back to GFP_ATOMIC only.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
copy cs instructions that dont have a explict MOCS field will use this
default MOCS value.
v2:
- move to xe_hw_engine.c
- remove BLIT_CCTL auxiliary macros
- removed MASKED_REG
v3:
- rebased
v4:
- process workaround in hwe->reg_lrc
v5:
- add a new function and call it from xe_gt_record_default_lrcs()
because hwe->reg_lrc is initialized later
BSpec: 45807
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
