diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net')
5 files changed, 190 insertions, 12 deletions
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index be130bf585a4..6364ca02642d 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -13,6 +13,7 @@ TEST_PROGS := \ bond_options.sh \ bond_passive_lacp.sh \ bond_stacked_header_parse.sh \ + bond_vlan_real_dev.sh \ dev_addr_lists.sh \ mode-1-recovery-updelay.sh \ mode-2-recovery-updelay.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_vlan_real_dev.sh b/tools/testing/selftests/drivers/net/bonding/bond_vlan_real_dev.sh new file mode 100755 index 000000000000..542d9ffc4819 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_vlan_real_dev.sh @@ -0,0 +1,180 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test propagation of a real device's state to the VLANs stacked on top of it +# when the real device is (or becomes) a bond member. +# +# The kernel mirrors a real device's UP/DOWN, MTU and feature changes onto its +# VLANs. This is done asynchronously (netdev_work): doing it synchronously from +# the real device's notifier could deadlock. If the real device is brought up +# while enslaved to a bond - so its instance lock is held across NETDEV_UP - and +# a VLAN on top of it is itself a bond member, the synchronous propagation +# re-entered the stack and tried to take the same instance lock again. +# +# Cover both halves: +# - the deferred UP/DOWN, MTU and feature propagation actually lands on the +# VLAN (link state and MTU use an ops-locked dummy, i.e. the deferral path), +# - the deadlock-prone topology - a VLAN on a dummy, with the VLAN and the +# dummy each enslaved to a different bond - can be built without hanging. + +ALL_TESTS=" + vlan_link_state + vlan_mtu + vlan_features + vlan_real_dev_enslave +" + +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +# Return 0 if $dev in netns $ns has flag $flag set (e.g. UP) in its <...> flags. +link_has_flag() +{ + local ns=$1 dev=$2 flag=$3 + + ip -n "$ns" link show dev "$dev" 2>/dev/null | grep -q "[<,]${flag}[,>]" +} + +link_lacks_flag() +{ + ! link_has_flag "$@" +} + +link_mtu_is() +{ + local ns=$1 dev=$2 want=$3 cur + + cur=$(ip -n "$ns" link show dev "$dev" 2>/dev/null | \ + sed -n 's/.* mtu \([0-9]\+\).*/\1/p') + [ "$cur" = "$want" ] +} + +vlan_feature_is() +{ + local ns=$1 dev=$2 feature=$3 value=$4 + + ip netns exec "$ns" ethtool -k "$dev" 2>/dev/null | \ + grep -q "^$feature: $value" +} + +link_has_master() +{ + local ns=$1 dev=$2 master=$3 + + ip -n "$ns" -o link show dev "$dev" 2>/dev/null | grep -q "master $master" +} + +vlan_link_state() +{ + RET=0 + + ip -n "$NS" link add ls_dummy type dummy + ip -n "$NS" link add link ls_dummy name ls_vlan type vlan id 100 + + # Bringing the real device up must propagate UP to the VLAN. + ip -n "$NS" link set ls_dummy up + busywait "$BUSYWAIT_TIMEOUT" link_has_flag "$NS" ls_vlan UP + check_err $? "VLAN did not go UP after the real device went UP" + + # ... and likewise for DOWN. + ip -n "$NS" link set ls_dummy down + busywait "$BUSYWAIT_TIMEOUT" link_lacks_flag "$NS" ls_vlan UP + check_err $? "VLAN did not go DOWN after the real device went DOWN" + + ip -n "$NS" link del ls_vlan + ip -n "$NS" link del ls_dummy + + log_test "VLAN link state follows the real device" +} + +vlan_mtu() +{ + RET=0 + + # The VLAN inherits the real device's MTU (2000) at creation time. + ip -n "$NS" link add mtu_dummy mtu 2000 type dummy + ip -n "$NS" link add link mtu_dummy name mtu_vlan type vlan id 100 + + # Shrinking the real device's MTU must clamp the VLAN's MTU. + ip -n "$NS" link set mtu_dummy mtu 1500 + busywait "$BUSYWAIT_TIMEOUT" link_mtu_is "$NS" mtu_vlan 1500 + check_err $? "VLAN MTU not clamped after the real device's MTU shrank" + + ip -n "$NS" link del mtu_vlan + ip -n "$NS" link del mtu_dummy + + log_test "VLAN MTU clamped to the real device" +} + +vlan_features() +{ + RET=0 + + # Use veth as the real device: unlike dummy it exports vlan_features, so + # the VLAN actually inherits a toggleable offload to assert on. + ip -n "$NS" link add ft_veth type veth peer name ft_veth_pr + ip -n "$NS" link add link ft_veth name ft_vlan type vlan id 100 + + vlan_feature_is "$NS" ft_vlan scatter-gather on + check_err $? "VLAN did not inherit scatter-gather from the real device" + + # Toggling the offload on the real device must propagate to the VLAN. + ip netns exec "$NS" ethtool -K ft_veth sg off + busywait "$BUSYWAIT_TIMEOUT" \ + vlan_feature_is "$NS" ft_vlan scatter-gather off + check_err $? "VLAN scatter-gather still on after disabling it on real dev" + + ip netns exec "$NS" ethtool -K ft_veth sg on + busywait "$BUSYWAIT_TIMEOUT" \ + vlan_feature_is "$NS" ft_vlan scatter-gather on + check_err $? "VLAN scatter-gather still off after enabling it on real dev" + + ip -n "$NS" link del ft_vlan + ip -n "$NS" link del ft_veth + + log_test "VLAN features follow the real device" +} + +vlan_real_dev_enslave() +{ + RET=0 + + # dummy <- VLAN -> bond0, then enslave the dummy itself to bond1. The + # last step brings the dummy up under bond1's instance lock, which used + # to deadlock while synchronously propagating UP to the (bond-enslaved) + # VLAN on top. + ip -n "$NS" link add dl_dummy type dummy + ip -n "$NS" link set dl_dummy up + ip -n "$NS" link add link dl_dummy name dl_vlan type vlan id 100 + + ip -n "$NS" link add dl_bond0 type bond mode active-backup + ip -n "$NS" link set dl_vlan down + ip -n "$NS" link set dl_vlan master dl_bond0 + check_err $? "could not enslave the VLAN to bond0" + + ip -n "$NS" link add dl_bond1 type bond mode active-backup + ip -n "$NS" link set dl_dummy down + ip -n "$NS" link set dl_dummy master dl_bond1 + check_err $? "could not enslave the real device to bond1" + + # If we got here the kernel did not deadlock; make sure it is still + # responsive and the enslave really took effect. + link_has_master "$NS" dl_dummy dl_bond1 + check_err $? "real device not enslaved to bond1" + + ip -n "$NS" link del dl_bond1 + ip -n "$NS" link del dl_bond0 + ip -n "$NS" link del dl_vlan + ip -n "$NS" link del dl_dummy + + log_test "VLAN real device enslaved to a second bond" +} + +setup_ns NS +trap 'cleanup_ns $NS' EXIT + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/hw/tso.py b/tools/testing/selftests/drivers/net/hw/tso.py index 1b789fea8929..802bb4868046 100755 --- a/tools/testing/selftests/drivers/net/hw/tso.py +++ b/tools/testing/selftests/drivers/net/hw/tso.py @@ -187,28 +187,24 @@ def query_nic_features(cfg) -> None: cfg.wanted_features.add(f["name"]) cfg.hw_features = set() - hw_all_features_cmd = "" for f in features["hw"]["bits"]["bit"]: if f.get("value", False): - feature = f["name"] - cfg.hw_features.add(feature) - hw_all_features_cmd += f" {feature} on" - try: - ethtool(f"-K {cfg.ifname} {hw_all_features_cmd}") - except Exception as e: - ksft_pr(f"WARNING: failure enabling all hw features: {e}") - ksft_pr("partial gso feature detection may be impacted") + cfg.hw_features.add(f["name"]) # Check which features are supported via GSO partial cfg.partial_features = set() if 'tx-gso-partial' in cfg.hw_features: + seg_features = {f for f in cfg.hw_features if "segmentation" in f} + ethtool(f"-K {cfg.ifname} " + + " ".join(f"{f} on" for f in seg_features)) + ethtool(f"-K {cfg.ifname} tx-gso-partial off") no_partial = set() features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) for f in features["active"]["bits"]["bit"]: no_partial.add(f["name"]) - cfg.partial_features = cfg.hw_features - no_partial + cfg.partial_features = seg_features - no_partial ethtool(f"-K {cfg.ifname} tx-gso-partial on") restore_wanted_features(cfg) diff --git a/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh b/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh index cb59cf436dd0..d9111f2102bc 100755 --- a/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh +++ b/tools/testing/selftests/drivers/net/netconsole/netcons_resume.sh @@ -44,7 +44,8 @@ function trigger_reactivation() { # Restore MACs ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" \ address "${SAVED_DSTMAC}" - if [ "${BINDMODE}" == "mac" ]; then + if [ "${BINDMODE}" == "mac" ] && + [ "$(mac_get "${SRCIF}")" != "${SAVED_SRCMAC}" ]; then ip link set dev "${SRCIF}" down ip link set dev "${SRCIF}" address "${SAVED_SRCMAC}" # Rename device in order to trigger target resume, as initial diff --git a/tools/testing/selftests/drivers/net/so_txtime.c b/tools/testing/selftests/drivers/net/so_txtime.c index 75f3beef13d9..55a386f3d1b9 100644 --- a/tools/testing/selftests/drivers/net/so_txtime.c +++ b/tools/testing/selftests/drivers/net/so_txtime.c @@ -37,7 +37,7 @@ static int cfg_clockid = CLOCK_TAI; static uint16_t cfg_port = 8000; -static int cfg_variance_us = 4000; +static int cfg_variance_us = 8000; static bool cfg_machine_slow; static uint64_t cfg_start_time_ns; static int cfg_mark; |