diff options
Diffstat (limited to 'sound/soc/codecs/cs35l56-shared.c')
| -rw-r--r-- | sound/soc/codecs/cs35l56-shared.c | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index e0ed4fc11155..e28bfefa72f3 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -10,6 +10,7 @@ #include <linux/gpio/consumer.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> #include <linux/types.h> #include <sound/cs-amp-lib.h> @@ -303,6 +304,79 @@ void cs35l56_wait_min_reset_pulse(void) } EXPORT_SYMBOL_NS_GPL(cs35l56_wait_min_reset_pulse, "SND_SOC_CS35L56_SHARED"); +static const struct { + u32 addr; + u32 value; +} cs35l56_spi_system_reset_stages[] = { + { .addr = CS35L56_DSP_VIRTUAL1_MBOX_1, .value = CS35L56_MBOX_CMD_SYSTEM_RESET }, + /* The next write is necessary to delimit the soft reset */ + { .addr = CS35L56_DSP_MBOX_1_RAW, .value = CS35L56_MBOX_CMD_PING }, +}; + +static void cs35l56_spi_issue_bus_locked_reset(struct cs35l56_base *cs35l56_base, + struct spi_device *spi) +{ + struct cs35l56_spi_payload *buf = cs35l56_base->spi_payload_buf; + struct spi_transfer t = { + .tx_buf = buf, + .len = sizeof(*buf), + }; + struct spi_message m; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(cs35l56_spi_system_reset_stages); i++) { + buf->addr = cpu_to_be32(cs35l56_spi_system_reset_stages[i].addr); + buf->value = cpu_to_be32(cs35l56_spi_system_reset_stages[i].value); + spi_message_init_with_transfers(&m, &t, 1); + ret = spi_sync_locked(spi, &m); + if (ret) + dev_warn(cs35l56_base->dev, "spi_sync failed: %d\n", ret); + + usleep_range(CS35L56_SPI_RESET_TO_PORT_READY_US, + 2 * CS35L56_SPI_RESET_TO_PORT_READY_US); + } +} + +static void cs35l56_spi_system_reset(struct cs35l56_base *cs35l56_base) +{ + struct spi_device *spi = to_spi_device(cs35l56_base->dev); + unsigned int val; + int read_ret, ret; + + /* + * There must not be any other SPI bus activity while the amp is + * soft-resetting. + */ + ret = spi_bus_lock(spi->controller); + if (ret) { + dev_warn(cs35l56_base->dev, "spi_bus_lock failed: %d\n", ret); + return; + } + + cs35l56_spi_issue_bus_locked_reset(cs35l56_base, spi); + spi_bus_unlock(spi->controller); + + /* + * Check firmware boot by testing for a response in MBOX_2. + * HALO_STATE cannot be trusted yet because the reset sequence + * can leave it with stale state. But MBOX is reset. + * The regmap must remain in cache-only until the chip has + * booted, so use a bypassed read. + */ + ret = read_poll_timeout(regmap_read_bypassed, read_ret, + (val > 0) && (val < 0xffffffff), + CS35L56_HALO_STATE_POLL_US, + CS35L56_HALO_STATE_TIMEOUT_US, + false, + cs35l56_base->regmap, + CS35L56_DSP_VIRTUAL1_MBOX_2, + &val); + if (ret) { + dev_err(cs35l56_base->dev, "SPI reboot timed out(%d): MBOX2=%#x\n", + read_ret, val); + } +} + static const struct reg_sequence cs35l56_system_reset_seq[] = { REG_SEQ0(CS35L56_DSP1_HALO_STATE, 0), REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_SYSTEM_RESET), @@ -315,6 +389,12 @@ void cs35l56_system_reset(struct cs35l56_base *cs35l56_base, bool is_soundwire) * accesses other than the controlled system reset sequence below. */ regcache_cache_only(cs35l56_base->regmap, true); + + if (cs35l56_is_spi(cs35l56_base)) { + cs35l56_spi_system_reset(cs35l56_base); + return; + } + regmap_multi_reg_write_bypassed(cs35l56_base->regmap, cs35l56_system_reset_seq, ARRAY_SIZE(cs35l56_system_reset_seq)); |