diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 88 |
1 files changed, 60 insertions, 28 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 363d7dd2255a..efbd79c67be2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -7,7 +7,7 @@ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation */ #include <linux/ethtool.h> @@ -127,6 +127,8 @@ struct wiphy; * even if it is otherwise disabled. * @IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP: Allow using this channel for AP operation * with very low power (VLP), even if otherwise set to NO_IR. + * @IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY: Allow activity on a 20 MHz channel, + * even if otherwise set to NO_IR. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = BIT(0), @@ -155,6 +157,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = BIT(23), IEEE80211_CHAN_CAN_MONITOR = BIT(24), IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP = BIT(25), + IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY = BIT(26), }; #define IEEE80211_CHAN_NO_HT40 \ @@ -1006,6 +1009,17 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width); /** + * cfg80211_chandef_get_width - return chandef width in MHz + * @c: chandef to return bandwidth for + * Return: channel width in MHz for the given chandef; note that it returns + * 80 for 80+80 configurations + */ +static inline int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + return nl80211_chan_width_to_mhz(c->width); +} + +/** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check * Return: %true if the channel definition is valid. %false otherwise. @@ -2045,9 +2059,6 @@ struct cfg80211_tid_stats { * @assoc_at: bootime (ns) of the last association * @rx_bytes: bytes (size of MPDUs) received from this station * @tx_bytes: bytes (size of MPDUs) transmitted to this station - * @llid: mesh local link id - * @plid: mesh peer link id - * @plink_state: mesh peer link state * @signal: The signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. @@ -2067,14 +2078,20 @@ struct cfg80211_tid_stats { * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. + * @beacon_loss_count: Number of times beacon loss event has triggered. * @assoc_req_ies: IEs from (Re)Association Request. * This is used only when in AP mode with drivers that do not use * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. * @sta_flags: station flags mask & values - * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @llid: mesh local link id + * @plid: mesh peer link id + * @plink_state: mesh peer link state + * @connected_to_gate: true if mesh STA has a path to mesh gate + * @connected_to_as: true if mesh STA has a path to authentication server + * @airtime_link_metric: mesh airtime link metric. * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode @@ -2083,7 +2100,6 @@ struct cfg80211_tid_stats { * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer - * @connected_to_gate: true if mesh STA has a path to mesh gate * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer * @airtime_weight: current airtime scheduling weight @@ -2097,8 +2113,6 @@ struct cfg80211_tid_stats { * @fcs_err_count: number of packets (MPDUs) received from this station with * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. - * @airtime_link_metric: mesh airtime link metric. - * @connected_to_as: true if mesh STA has a path to authentication server * @mlo_params_valid: Indicates @assoc_link_id and @mld_addr fields are filled * by driver. Drivers use this only in cfg80211_new_sta() calls when AP * MLD's MLME/SME is offload to driver. Drivers won't fill this @@ -2125,9 +2139,6 @@ struct station_info { u64 assoc_at; u64 rx_bytes; u64 tx_bytes; - u16 llid; - u16 plid; - u8 plink_state; s8 signal; s8 signal_avg; @@ -2147,36 +2158,38 @@ struct station_info { int generation; + u32 beacon_loss_count; + const u8 *assoc_req_ies; size_t assoc_req_ies_len; - u32 beacon_loss_count; s64 t_offset; + u16 llid; + u16 plid; + u8 plink_state; + u8 connected_to_gate; + u8 connected_to_as; + u32 airtime_link_metric; enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; u32 expected_throughput; - u64 tx_duration; - u64 rx_duration; - u64 rx_beacon; - u8 rx_beacon_signal_avg; - u8 connected_to_gate; + u16 airtime_weight; - struct cfg80211_tid_stats *pertid; s8 ack_signal; s8 avg_ack_signal; + struct cfg80211_tid_stats *pertid; - u16 airtime_weight; + u64 tx_duration; + u64 rx_duration; + u64 rx_beacon; + u8 rx_beacon_signal_avg; u32 rx_mpdu_count; u32 fcs_err_count; - u32 airtime_link_metric; - - u8 connected_to_as; - bool mlo_params_valid; u8 assoc_link_id; u8 mld_addr[ETH_ALEN] __aligned(2); @@ -2265,7 +2278,7 @@ static inline int cfg80211_get_station(struct net_device *dev, * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP * @MONITOR_FLAG_CONTROL: pass control frames * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering - * @MONITOR_FLAG_COOK_FRAMES: report frames after processing + * @MONITOR_FLAG_COOK_FRAMES: deprecated, will unconditionally be refused * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address * @MONITOR_FLAG_SKIP_TX: do not pass locally transmitted frames */ @@ -2947,6 +2960,7 @@ struct cfg80211_bss_ies { * @nontrans_list: list of non-transmitted BSS, if this is a transmitted one * (multi-BSSID support) * @signal: signal strength value (type depends on the wiphy's signal_type) + * @ts_boottime: timestamp of the last BSS update in nanoseconds since boot * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. * @bssid_index: index in the multiple BSS set @@ -2971,6 +2985,8 @@ struct cfg80211_bss { s32 signal; + u64 ts_boottime; + u16 beacon_interval; u16 capability; @@ -3081,6 +3097,19 @@ struct cfg80211_assoc_link { }; /** + * struct cfg80211_ml_reconf_req - MLO link reconfiguration request + * @add_links: data for links to add, see &struct cfg80211_assoc_link + * @rem_links: bitmap of links to remove + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the ML reconfiguration action frame + */ +struct cfg80211_ml_reconf_req { + struct cfg80211_assoc_link add_links[IEEE80211_MLD_MAX_NUM_LINKS]; + u16 rem_links; + u16 ext_mld_capa_ops; +}; + +/** * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. * * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) @@ -3130,10 +3159,10 @@ enum cfg80211_assoc_req_flags { * included in the Current AP address field of the Reassociation Request * frame. * @flags: See &enum cfg80211_assoc_req_flags - * @supported_selectors: supported selectors in IEEE 802.11 format + * @supported_selectors: supported BSS selectors in IEEE 802.11 format * (or %NULL for no change). * If %NULL, then support for SAE_H2E should be assumed. - * @supported_selectors_len: Length of supported_selectors in octets. + * @supported_selectors_len: number of supported BSS selectors * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. @@ -3152,6 +3181,8 @@ enum cfg80211_assoc_req_flags { * the link on which the association request should be sent * @ap_mld_addr: AP MLD address in case of MLO association request, * valid iff @link_id >= 0 + * @ext_mld_capa_ops: extended MLD capabilities and operations set by + * userspace for the association */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; @@ -3172,6 +3203,7 @@ struct cfg80211_assoc_request { struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS]; const u8 *ap_mld_addr; s8 link_id; + u16 ext_mld_capa_ops; }; /** @@ -4970,8 +5002,7 @@ struct cfg80211_ops { struct cfg80211_ttlm_params *params); u32 (*get_radio_mask)(struct wiphy *wiphy, struct net_device *dev); int (*assoc_ml_reconf)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_assoc_link *add_links, - u16 rem_links); + struct cfg80211_ml_reconf_req *req); int (*set_epcs)(struct wiphy *wiphy, struct net_device *dev, bool val); }; @@ -9750,6 +9781,7 @@ struct cfg80211_mlo_reconf_done_data { u16 added_links; struct { struct cfg80211_bss *bss; + u8 *addr; } links[IEEE80211_MLD_MAX_NUM_LINKS]; }; |