diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/chipidea/ci_hdrc_imx.c | 15 | ||||
-rw-r--r-- | drivers/usb/class/cdc-acm.c | 8 | ||||
-rw-r--r-- | drivers/usb/class/cdc-wdm.c | 6 | ||||
-rw-r--r-- | drivers/usb/common/Kconfig | 3 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/function/f_uac2.c | 14 | ||||
-rw-r--r-- | drivers/usb/host/ohci-omap.c | 72 | ||||
-rw-r--r-- | drivers/usb/host/xhci-dbgtty.c | 28 | ||||
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 6 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 39 | ||||
-rw-r--r-- | drivers/usb/host/xhci-tegra.c | 12 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 5 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 1 | ||||
-rw-r--r-- | drivers/usb/musb/musb_dsps.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/qcserial.c | 1 | ||||
-rw-r--r-- | drivers/usb/typec/tcpm/tcpci.c | 2 | ||||
-rw-r--r-- | drivers/usb/typec/tcpm/tcpm.c | 1 | ||||
-rw-r--r-- | drivers/usb/typec/tipd/core.c | 8 |
19 files changed, 114 insertions, 121 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 8b7bc10b6e8b..f1d100671ee6 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -420,11 +420,16 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { ret = PTR_ERR(data->phy); - /* Return -EINVAL if no usbphy is available */ - if (ret == -ENODEV) - data->phy = NULL; - else - goto err_clk; + if (ret == -ENODEV) { + data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0); + if (IS_ERR(data->phy)) { + ret = PTR_ERR(data->phy); + if (ret == -ENODEV) + data->phy = NULL; + else + goto err_clk; + } + } } pdata.usb_phy = data->phy; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4e2f1552f4b7..7b2e2420ecae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -340,6 +340,9 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) acm->iocount.overrun++; spin_unlock_irqrestore(&acm->read_lock, flags); + if (newctrl & ACM_CTRL_BRK) + tty_flip_buffer_push(&acm->port); + if (difference) wake_up_all(&acm->wioctl); @@ -475,11 +478,16 @@ static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags) static void acm_process_read_urb(struct acm *acm, struct urb *urb) { + unsigned long flags; + if (!urb->actual_length) return; + spin_lock_irqsave(&acm->read_lock, flags); tty_insert_flip_string(&acm->port, urb->transfer_buffer, urb->actual_length); + spin_unlock_irqrestore(&acm->read_lock, flags); + tty_flip_buffer_push(&acm->port); } diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 35d5908b5478..fdf79bcf7eb0 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -824,7 +824,7 @@ static struct usb_class_driver wdm_class = { }; /* --- WWAN framework integration --- */ -#ifdef CONFIG_WWAN_CORE +#ifdef CONFIG_WWAN static int wdm_wwan_port_start(struct wwan_port *port) { struct wdm_device *desc = wwan_port_get_drvdata(port); @@ -963,11 +963,11 @@ static void wdm_wwan_rx(struct wdm_device *desc, int length) /* inbuf has been copied, it is safe to check for outstanding data */ schedule_work(&desc->service_outs_intr); } -#else /* CONFIG_WWAN_CORE */ +#else /* CONFIG_WWAN */ static void wdm_wwan_init(struct wdm_device *desc) {} static void wdm_wwan_deinit(struct wdm_device *desc) {} static void wdm_wwan_rx(struct wdm_device *desc, int length) {} -#endif /* CONFIG_WWAN_CORE */ +#endif /* CONFIG_WWAN */ /* --- error handling --- */ static void wdm_rxwork(struct work_struct *work) diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig index 5e8a04e3dd3c..b856622431a7 100644 --- a/drivers/usb/common/Kconfig +++ b/drivers/usb/common/Kconfig @@ -6,8 +6,7 @@ config USB_COMMON config USB_LED_TRIG bool "USB LED Triggers" - depends on LEDS_CLASS && LEDS_TRIGGERS - select USB_COMMON + depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS help This option adds LED triggers for USB host and/or gadget activity. diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 804b50548163..4519d06c9ca2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4243,7 +4243,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) } - usb_initialize_gadget(dwc->sysdev, dwc->gadget, dwc_gadget_release); + usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release); dev = &dwc->gadget->dev; dev->platform_data = dwc; dwc->gadget->ops = &dwc3_gadget_ops; diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index be864560bfea..ef55b8bb5870 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -674,11 +674,17 @@ static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, ssize = uac2_opts->c_ssize; } - if (!is_playback && (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) + if (!is_playback && (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) { + // Win10 requires max packet size + 1 frame srate = srate * (1000 + uac2_opts->fb_max) / 1000; - - max_size_bw = num_channels(chmask) * ssize * - DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))); + // updated srate is always bigger, therefore DIV_ROUND_UP always yields +1 + max_size_bw = num_channels(chmask) * ssize * + (DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)))); + } else { + // adding 1 frame provision for Win10 + max_size_bw = num_channels(chmask) * ssize * + (DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))) + 1); + } ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw, max_size_ep)); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 0b3722770760..ded9738392e4 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -40,17 +40,6 @@ #include <mach/usb.h> -/* OMAP-1510 OHCI has its own MMU for DMA */ -#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ -#define OMAP1510_LB_CLOCK_DIV 0xfffec10c -#define OMAP1510_LB_MMU_CTL 0xfffec208 -#define OMAP1510_LB_MMU_LCK 0xfffec224 -#define OMAP1510_LB_MMU_LD_TLB 0xfffec228 -#define OMAP1510_LB_MMU_CAM_H 0xfffec22c -#define OMAP1510_LB_MMU_CAM_L 0xfffec230 -#define OMAP1510_LB_MMU_RAM_H 0xfffec234 -#define OMAP1510_LB_MMU_RAM_L 0xfffec238 - #define DRIVER_DESC "OHCI OMAP driver" struct ohci_omap_priv { @@ -104,61 +93,6 @@ static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on) return 0; } -#ifdef CONFIG_ARCH_OMAP15XX -/* - * OMAP-1510 specific Local Bus clock on/off - */ -static int omap_1510_local_bus_power(int on) -{ - if (on) { - omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); - udelay(200); - } else { - omap_writel(0, OMAP1510_LB_MMU_CTL); - } - - return 0; -} - -/* - * OMAP-1510 specific Local Bus initialization - * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. - * See also arch/mach-omap/memory.h for __virt_to_dma() and - * __dma_to_virt() which need to match with the physical - * Local Bus address below. - */ -static int omap_1510_local_bus_init(void) -{ - unsigned int tlb; - unsigned long lbaddr, physaddr; - - omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, - OMAP1510_LB_CLOCK_DIV); - - /* Configure the Local Bus MMU table */ - for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { - lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; - physaddr = tlb * 0x00100000 + PHYS_OFFSET; - omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); - omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, - OMAP1510_LB_MMU_CAM_L); - omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); - omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); - omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); - omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); - } - - /* Enable the walking table */ - omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); - udelay(200); - - return 0; -} -#else -#define omap_1510_local_bus_power(x) {} -#define omap_1510_local_bus_init() {} -#endif - #ifdef CONFIG_USB_OTG static void start_hnp(struct ohci_hcd *ohci) @@ -229,10 +163,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd) omap_ohci_clock_power(priv, 1); - if (cpu_is_omap15xx()) { - omap_1510_local_bus_power(1); - omap_1510_local_bus_init(); - } + if (config->lb_reset) + config->lb_reset(); ret = ohci_setup(hcd); if (ret < 0) diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index 6e784f2fc26d..eb46e642e87a 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -408,40 +408,38 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc) return -EBUSY; xhci_dbc_tty_init_port(dbc, port); - tty_dev = tty_port_register_device(&port->port, - dbc_tty_driver, 0, NULL); - if (IS_ERR(tty_dev)) { - ret = PTR_ERR(tty_dev); - goto register_fail; - } ret = kfifo_alloc(&port->write_fifo, DBC_WRITE_BUF_SIZE, GFP_KERNEL); if (ret) - goto buf_alloc_fail; + goto err_exit_port; ret = xhci_dbc_alloc_requests(dbc, BULK_IN, &port->read_pool, dbc_read_complete); if (ret) - goto request_fail; + goto err_free_fifo; ret = xhci_dbc_alloc_requests(dbc, BULK_OUT, &port->write_pool, dbc_write_complete); if (ret) - goto request_fail; + goto err_free_requests; + + tty_dev = tty_port_register_device(&port->port, + dbc_tty_driver, 0, NULL); + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + goto err_free_requests; + } port->registered = true; return 0; -request_fail: +err_free_requests: xhci_dbc_free_requests(&port->read_pool); xhci_dbc_free_requests(&port->write_pool); +err_free_fifo: kfifo_free(&port->write_fifo); - -buf_alloc_fail: - tty_unregister_device(dbc_tty_driver, 0); - -register_fail: +err_exit_port: xhci_dbc_tty_exit_port(port); dev_err(dbc->dev, "can't register tty port, err %d\n", ret); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2c9f25ca8edd..2484a9d38ce2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -30,6 +30,7 @@ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -113,6 +114,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 || pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && pdev->revision == 0x0) { @@ -279,8 +281,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; + } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e676749f543b..311597bba80e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -366,16 +366,22 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, /* Must be called with xhci->lock held, releases and aquires lock back */ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) { - u64 temp_64; + u32 temp_32; int ret; xhci_dbg(xhci, "Abort command ring\n"); reinit_completion(&xhci->cmd_ring_stop_completion); - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, - &xhci->op_regs->cmd_ring); + /* + * The control bits like command stop, abort are located in lower + * dword of the command ring control register. Limit the write + * to the lower dword to avoid corrupting the command ring pointer + * in case if the command ring is stopped by the time upper dword + * is written. + */ + temp_32 = readl(&xhci->op_regs->cmd_ring); + writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); /* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the * completion of the Command Abort operation. If CRR is not negated in 5 @@ -559,8 +565,11 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; struct xhci_command *cmd; struct xhci_segment *new_seg; + struct xhci_segment *halted_seg = NULL; union xhci_trb *new_deq; int new_cycle; + union xhci_trb *halted_trb; + int index = 0; dma_addr_t addr; u64 hw_dequeue; bool cycle_found = false; @@ -598,7 +607,27 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - new_cycle = hw_dequeue & 0x1; + + /* + * Quirk: xHC write-back of the DCS field in the hardware dequeue + * pointer is wrong - use the cycle state of the TRB pointed to by + * the dequeue pointer. + */ + if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && + !(ep->ep_state & EP_HAS_STREAMS)) + halted_seg = trb_in_td(xhci, td->start_seg, + td->first_trb, td->last_trb, + hw_dequeue & ~0xf, false); + if (halted_seg) { + index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / + sizeof(*halted_trb); + halted_trb = &halted_seg->trbs[index]; + new_cycle = halted_trb->generic.field[3] & 0x1; + xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", + (u8)(hw_dequeue & 0x1), index, new_cycle); + } else { + new_cycle = hw_dequeue & 0x1; + } /* * We want to find the pointer, segment and cycle state of the new trb diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 575fa89a783f..1bf494b649bd 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1787,7 +1787,6 @@ static int tegra_xusb_remove(struct platform_device *pdev) return 0; } -#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_PM_SLEEP) static bool xhci_hub_ports_suspended(struct xhci_hub *hub) { struct device *dev = hub->hcd->self.controller; @@ -2102,7 +2101,7 @@ out: return err; } -static int tegra_xusb_suspend(struct device *dev) +static __maybe_unused int tegra_xusb_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2144,7 +2143,7 @@ out: return err; } -static int tegra_xusb_resume(struct device *dev) +static __maybe_unused int tegra_xusb_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2174,10 +2173,8 @@ static int tegra_xusb_resume(struct device *dev) return 0; } -#endif -#ifdef CONFIG_PM -static int tegra_xusb_runtime_suspend(struct device *dev) +static __maybe_unused int tegra_xusb_runtime_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int ret; @@ -2190,7 +2187,7 @@ static int tegra_xusb_runtime_suspend(struct device *dev) return ret; } -static int tegra_xusb_runtime_resume(struct device *dev) +static __maybe_unused int tegra_xusb_runtime_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); int err; @@ -2201,7 +2198,6 @@ static int tegra_xusb_runtime_resume(struct device *dev) return err; } -#endif static const struct dev_pm_ops tegra_xusb_pm_ops = { SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 93c38b557afd..541fe4dcc43a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3214,10 +3214,13 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; /* Bail out if toggle is already being cleared by a endpoint reset */ + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); return; } + spin_unlock_irqrestore(&xhci->lock, flags); /* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */ if (usb_endpoint_xfer_control(&host_ep->desc) || usb_endpoint_xfer_isoc(&host_ep->desc)) @@ -3303,8 +3306,10 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, xhci_free_command(xhci, cfg_cmd); cleanup: xhci_free_command(xhci, stop_cmd); + spin_lock_irqsave(&xhci->lock, flags); if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE) ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE; + spin_unlock_irqrestore(&xhci->lock, flags); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index dca6181c33fd..5a75fe563123 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1899,6 +1899,7 @@ struct xhci_hcd { #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) #define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index ce9fc46c9266..b5935834f9d2 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -899,11 +899,13 @@ static int dsps_probe(struct platform_device *pdev) if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) { ret = dsps_setup_optional_vbus_irq(pdev, glue); if (ret) - goto err; + goto unregister_pdev; } return 0; +unregister_pdev: + platform_device_unregister(glue->musb); err: pm_runtime_disable(&pdev->dev); iounmap(glue->usbss_base); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6cfb5d33609f..a484ff5e4ebf 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -246,11 +246,13 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define CMOTECH_VENDOR_ID 0x16d8 @@ -1111,6 +1113,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, @@ -1128,6 +1133,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, @@ -1227,6 +1233,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff), /* Telit LE910Cx (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff), /* Telit LE910Cx (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 83da8236e3c8..c18bf8164bc2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ + {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 9858716698df..c15eec9cc460 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -696,7 +696,7 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci) tcpm_pd_receive(tcpci->port, &msg); } - if (status & TCPC_ALERT_EXTENDED_STATUS) { + if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) { ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw); if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V)) tcpm_vbus_change(tcpci->port); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index a4d37205df54..7f2f3ff1b391 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4876,6 +4876,7 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, tcpm_set_state(port, SRC_ATTACH_WAIT, 0); break; case SRC_ATTACHED: + case SRC_STARTUP: case SRC_SEND_CAPABILITIES: case SRC_READY: if (tcpm_port_is_disconnected(port) || diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 21b3ae25c76d..ea4cc0a6e40c 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -625,10 +625,6 @@ static int tps6598x_probe(struct i2c_client *client) if (ret < 0) return ret; - fwnode = device_get_named_child_node(&client->dev, "connector"); - if (!fwnode) - return -ENODEV; - /* * This fwnode has a "compatible" property, but is never populated as a * struct device. Instead we simply parse it to read the properties. @@ -636,7 +632,9 @@ static int tps6598x_probe(struct i2c_client *client) * with existing DT files, we work around this by deleting any * fwnode_links to/from this fwnode. */ - fw_devlink_purge_absent_suppliers(fwnode); + fwnode = device_get_named_child_node(&client->dev, "connector"); + if (fwnode) + fw_devlink_purge_absent_suppliers(fwnode); tps->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(tps->role_sw)) { |