diff options
Diffstat (limited to 'drivers/usb/musb')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 12 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_host.c | 22 |
2 files changed, 22 insertions, 12 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ba13529cbd52..18cfc0a361cb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -132,7 +132,7 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ #ifndef CONFIG_BLACKFIN -static int musb_ulpi_read(struct usb_phy *phy, u32 offset) +static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -151,7 +151,7 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. */ - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); @@ -176,7 +176,7 @@ out: return ret; } -static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) +static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -191,8 +191,8 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) power &= ~MUSB_POWER_SUSPENDM; musb_writeb(addr, MUSB_POWER, power); - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); - musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); + musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) @@ -1668,7 +1668,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt); static bool use_dma = 1; /* "modprobe ... use_dma=0" etc */ -module_param(use_dma, bool, 0); +module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 26c65e66cc0f..795a45b1b25b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -112,22 +112,32 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) struct musb *musb = ep->musb; void __iomem *epio = ep->regs; u16 csr; - u16 lastcsr = 0; int retries = 1000; csr = musb_readw(epio, MUSB_TXCSR); while (csr & MUSB_TXCSR_FIFONOTEMPTY) { - if (csr != lastcsr) - dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr); - lastcsr = csr; csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); - if (WARN(retries-- < 1, + + /* + * FIXME: sometimes the tx fifo flush failed, it has been + * observed during device disconnect on AM335x. + * + * To reproduce the issue, ensure tx urb(s) are queued when + * unplug the usb device which is connected to AM335x usb + * host port. + * + * I found using a usb-ethernet device and running iperf + * (client on AM335x) has very high chance to trigger it. + * + * Better to turn on dev_dbg() in musb_cleanup_urb() with + * CPPI enabled to see the issue when aborting the tx channel. + */ + if (dev_WARN_ONCE(musb->controller, retries-- < 1, "Could not flush host TX%d fifo: csr: %04x\n", ep->epnum, csr)) return; - mdelay(1); } } |