diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_tsn.c')
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_tsn.c | 76 |
1 files changed, 62 insertions, 14 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c index 22cefb1eeedf..d68fa7f3d5f0 100644 --- a/drivers/net/ethernet/intel/igc/igc_tsn.c +++ b/drivers/net/ethernet/intel/igc/igc_tsn.c @@ -49,12 +49,19 @@ static unsigned int igc_tsn_new_flags(struct igc_adapter *adapter) return new_flags; } +static bool igc_tsn_is_tx_mode_in_tsn(struct igc_adapter *adapter) +{ + struct igc_hw *hw = &adapter->hw; + + return !!(rd32(IGC_TQAVCTRL) & IGC_TQAVCTRL_TRANSMIT_MODE_TSN); +} + void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; u16 txoffset; - if (!is_any_launchtime(adapter)) + if (!igc_tsn_is_tx_mode_in_tsn(adapter)) return; switch (adapter->link_speed) { @@ -78,6 +85,23 @@ void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter) wr32(IGC_GTXOFFSET, txoffset); } +static void igc_tsn_restore_retx_default(struct igc_adapter *adapter) +{ + struct igc_hw *hw = &adapter->hw; + u32 retxctl; + + retxctl = rd32(IGC_RETX_CTL) & IGC_RETX_CTL_WATERMARK_MASK; + wr32(IGC_RETX_CTL, retxctl); +} + +bool igc_tsn_is_taprio_activated_by_user(struct igc_adapter *adapter) +{ + struct igc_hw *hw = &adapter->hw; + + return (rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) && + adapter->taprio_offload_enable; +} + /* Returns the TSN specific registers to their default values after * the adapter is reset. */ @@ -91,6 +115,9 @@ static int igc_tsn_disable_offload(struct igc_adapter *adapter) wr32(IGC_TXPBS, I225_TXPBSIZE_DEFAULT); wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_DEFAULT); + if (igc_is_device_id_i226(hw)) + igc_tsn_restore_retx_default(adapter); + tqavctrl = rd32(IGC_TQAVCTRL); tqavctrl &= ~(IGC_TQAVCTRL_TRANSMIT_MODE_TSN | IGC_TQAVCTRL_ENHANCED_QAV | IGC_TQAVCTRL_FUTSCDDIS); @@ -111,6 +138,25 @@ static int igc_tsn_disable_offload(struct igc_adapter *adapter) return 0; } +/* To partially fix i226 HW errata, reduce MAC internal buffering from 192 Bytes + * to 88 Bytes by setting RETX_CTL register using the recommendation from: + * a) Ethernet Controller I225/I226 Specification Update Rev 2.1 + * Item 9: TSN: Packet Transmission Might Cross the Qbv Window + * b) I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control + */ +static void igc_tsn_set_retx_qbvfullthreshold(struct igc_adapter *adapter) +{ + struct igc_hw *hw = &adapter->hw; + u32 retxctl, watermark; + + retxctl = rd32(IGC_RETX_CTL); + watermark = retxctl & IGC_RETX_CTL_WATERMARK_MASK; + /* Set QBVFULLTH value using watermark and set QBVFULLEN */ + retxctl |= (watermark << IGC_RETX_CTL_QBVFULLTH_SHIFT) | + IGC_RETX_CTL_QBVFULLEN; + wr32(IGC_RETX_CTL, retxctl); +} + static int igc_tsn_enable_offload(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; @@ -123,6 +169,9 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter) wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_TSN); wr32(IGC_TXPBS, IGC_TXPBSIZE_TSN); + if (igc_is_device_id_i226(hw)) + igc_tsn_set_retx_qbvfullthreshold(adapter); + for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; u32 txqctl = 0; @@ -262,14 +311,6 @@ skip_cbs: s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle); base_time = ktime_add_ns(base_time, (n + 1) * cycle); - - /* Increase the counter if scheduling into the past while - * Gate Control List (GCL) is running. - */ - if ((rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) && - (adapter->tc_setup_type == TC_SETUP_QDISC_TAPRIO) && - (adapter->qbv_count > 1)) - adapter->qbv_config_change_errors++; } else { if (igc_is_device_id_i226(hw)) { ktime_t adjust_time, expires_time; @@ -331,15 +372,22 @@ int igc_tsn_reset(struct igc_adapter *adapter) return err; } -int igc_tsn_offload_apply(struct igc_adapter *adapter) +static bool igc_tsn_will_tx_mode_change(struct igc_adapter *adapter) { - struct igc_hw *hw = &adapter->hw; + bool any_tsn_enabled = !!(igc_tsn_new_flags(adapter) & + IGC_FLAG_TSN_ANY_ENABLED); - /* Per I225/6 HW Design Section 7.5.2.1, transmit mode - * cannot be changed dynamically. Require reset the adapter. + return (any_tsn_enabled && !igc_tsn_is_tx_mode_in_tsn(adapter)) || + (!any_tsn_enabled && igc_tsn_is_tx_mode_in_tsn(adapter)); +} + +int igc_tsn_offload_apply(struct igc_adapter *adapter) +{ + /* Per I225/6 HW Design Section 7.5.2.1 guideline, if tx mode change + * from legacy->tsn or tsn->legacy, then reset adapter is needed. */ if (netif_running(adapter->netdev) && - (igc_is_device_id_i225(hw) || !adapter->qbv_count)) { + igc_tsn_will_tx_mode_change(adapter)) { schedule_work(&adapter->reset_task); return 0; } |