diff options
Diffstat (limited to 'drivers/net/dsa/realtek/rtl8366rb.c')
| -rw-r--r-- | drivers/net/dsa/realtek/rtl8366rb.c | 265 |
1 files changed, 10 insertions, 255 deletions
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index 23374178a176..f54771cab56d 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -21,16 +21,13 @@ #include <linux/irqchip/chained_irq.h> #include <linux/of_irq.h> #include <linux/regmap.h> +#include <linux/string_choices.h> #include "realtek.h" #include "realtek-smi.h" #include "realtek-mdio.h" #include "rtl83xx.h" - -#define RTL8366RB_PORT_NUM_CPU 5 -#define RTL8366RB_NUM_PORTS 6 -#define RTL8366RB_PHY_NO_MAX 4 -#define RTL8366RB_PHY_ADDR_MAX 31 +#include "rtl8366rb.h" /* Switch Global Configuration register */ #define RTL8366RB_SGCR 0x0000 @@ -175,39 +172,6 @@ */ #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f -/* LED control registers */ -/* The LED blink rate is global; it is used by all triggers in all groups. */ -#define RTL8366RB_LED_BLINKRATE_REG 0x0430 -#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 -#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 -#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 -#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 -#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 -#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 -#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 - -/* LED trigger event for each group */ -#define RTL8366RB_LED_CTRL_REG 0x0431 -#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ - (4 * (led_group)) -#define RTL8366RB_LED_CTRL_MASK(led_group) \ - (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) - -/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only - * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is - * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. - */ -#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 -#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 -#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ - ((led_group) <= 1 ? \ - RTL8366RB_LED_0_1_CTRL_REG : \ - RTL8366RB_LED_2_3_CTRL_REG) -#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) -#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) - #define RTL8366RB_MIB_COUNT 33 #define RTL8366RB_GLOBAL_MIB_COUNT 1 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 @@ -243,7 +207,6 @@ #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 #define RTL8366RB_NUM_VLANS 16 -#define RTL8366RB_NUM_LEDGROUPS 4 #define RTL8366RB_NUM_VIDS 4096 #define RTL8366RB_PRIORITYMAX 7 #define RTL8366RB_NUM_FIDS 8 @@ -350,46 +313,6 @@ #define RTL8366RB_GREEN_FEATURE_TX BIT(0) #define RTL8366RB_GREEN_FEATURE_RX BIT(2) -enum rtl8366_ledgroup_mode { - RTL8366RB_LEDGROUP_OFF = 0x0, - RTL8366RB_LEDGROUP_DUP_COL = 0x1, - RTL8366RB_LEDGROUP_LINK_ACT = 0x2, - RTL8366RB_LEDGROUP_SPD1000 = 0x3, - RTL8366RB_LEDGROUP_SPD100 = 0x4, - RTL8366RB_LEDGROUP_SPD10 = 0x5, - RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, - RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, - RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, - RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, - RTL8366RB_LEDGROUP_FIBER = 0xa, - RTL8366RB_LEDGROUP_AN_FAULT = 0xb, - RTL8366RB_LEDGROUP_LINK_RX = 0xc, - RTL8366RB_LEDGROUP_LINK_TX = 0xd, - RTL8366RB_LEDGROUP_MASTER = 0xe, - RTL8366RB_LEDGROUP_FORCE = 0xf, - - __RTL8366RB_LEDGROUP_MODE_MAX -}; - -struct rtl8366rb_led { - u8 port_num; - u8 led_group; - struct realtek_priv *priv; - struct led_classdev cdev; -}; - -/** - * struct rtl8366rb - RTL8366RB-specific data - * @max_mtu: per-port max MTU setting - * @pvid_enabled: if PVID is set for respective port - * @leds: per-port and per-ledgroup led info - */ -struct rtl8366rb { - unsigned int max_mtu[RTL8366RB_NUM_PORTS]; - bool pvid_enabled[RTL8366RB_NUM_PORTS]; - struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; -}; - static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { { 0, 0, 4, "IfInOctets" }, { 0, 4, 4, "EtherStatsOctets" }, @@ -830,9 +753,10 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, return 0; } -static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, - u8 led_group, - enum rtl8366_ledgroup_mode mode) +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode) { int ret; u32 val; @@ -849,144 +773,7 @@ static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, return 0; } -static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) -{ - switch (led_group) { - case 0: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 1: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 2: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 3: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - default: - return 0; - } -} - -static int rb8366rb_get_port_led(struct rtl8366rb_led *led) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - u32 val; - - ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), - &val); - if (ret) { - dev_err(priv->dev, "error reading LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); -} - -static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_X_X_CTRL_REG(led_group), - rtl8366rb_led_group_port_mask(led_group, - port_num), - enable ? 0xffff : 0); - if (ret) { - dev_err(priv->dev, "error updating LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - /* Change the LED group to manual controlled LEDs if required */ - ret = rb8366rb_set_ledgroup_mode(priv, led_group, - RTL8366RB_LEDGROUP_FORCE); - - if (ret) { - dev_err(priv->dev, "error updating LED GROUP group %d\n", - led_group); - return ret; - } - - return 0; -} - -static int -rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, - enum led_brightness brightness) -{ - struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, - cdev); - - return rb8366rb_set_port_led(led, brightness == LED_ON); -} - -static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, - struct fwnode_handle *led_fwnode) -{ - struct rtl8366rb *rb = priv->chip_data; - struct led_init_data init_data = { }; - enum led_default_state state; - struct rtl8366rb_led *led; - u32 led_group; - int ret; - - ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); - if (ret) - return ret; - - if (led_group >= RTL8366RB_NUM_LEDGROUPS) { - dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", - led_group, dp->index); - return -EINVAL; - } - - led = &rb->leds[dp->index][led_group]; - led->port_num = dp->index; - led->led_group = led_group; - led->priv = priv; - - state = led_init_default_state_get(led_fwnode); - switch (state) { - case LEDS_DEFSTATE_ON: - led->cdev.brightness = 1; - rb8366rb_set_port_led(led, 1); - break; - case LEDS_DEFSTATE_KEEP: - led->cdev.brightness = - rb8366rb_get_port_led(led); - break; - case LEDS_DEFSTATE_OFF: - default: - led->cdev.brightness = 0; - rb8366rb_set_port_led(led, 0); - } - - led->cdev.max_brightness = 1; - led->cdev.brightness_set_blocking = - rtl8366rb_cled_brightness_set_blocking; - init_data.fwnode = led_fwnode; - init_data.devname_mandatory = true; - - init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", - dp->ds->index, dp->index, led_group); - if (!init_data.devicename) - return -ENOMEM; - - ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); - if (ret) { - dev_warn(priv->dev, "Failed to init LED %d for port %d", - led_group, dp->index); - return ret; - } - - return 0; -} - +/* This code is used also with LEDs disabled */ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) { int ret = 0; @@ -1007,38 +794,6 @@ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) return ret; } -static int rtl8366rb_setup_leds(struct realtek_priv *priv) -{ - struct dsa_switch *ds = &priv->ds; - struct device_node *leds_np; - struct dsa_port *dp; - int ret = 0; - - dsa_switch_for_each_port(dp, ds) { - if (!dp->dn) - continue; - - leds_np = of_get_child_by_name(dp->dn, "leds"); - if (!leds_np) { - dev_dbg(priv->dev, "No leds defined for port %d", - dp->index); - continue; - } - - for_each_child_of_node_scoped(leds_np, led_np) { - ret = rtl8366rb_setup_led(priv, dp, - of_fwnode_handle(led_np)); - if (ret) - break; - } - - of_node_put(leds_np); - if (ret) - return ret; - } - return 0; -} - static int rtl8366rb_setup(struct dsa_switch *ds) { struct realtek_priv *priv = ds->priv; @@ -1522,7 +1277,7 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, rb = priv->chip_data; dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port, - vlan_filtering ? "enable" : "disable"); + str_enable_disable(vlan_filtering)); /* If the port is not in the member set, the frame will be dropped */ ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, @@ -1884,7 +1639,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, enable ? RTL8366RB_SGCR_EN_VLAN : 0); @@ -1892,7 +1647,7 @@ static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN 4k\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN_4KTB, enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); |