diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8150-hdk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 174 |
1 files changed, 151 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 6ea883b1edfa..6ae6e07c37df 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -20,6 +20,7 @@ aliases { serial0 = &uart2; + serial1 = &uart13; }; chosen { @@ -66,6 +67,43 @@ }; }; }; + + wcn3998-pmu { + compatible = "qcom,wcn3998-pmu"; + + pinctrl-0 = <&sw_ctrl_default>; + pinctrl-names = "default"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + vddch1-supply = <&vreg_l10c_3p3>; + + swctrl-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_io: ldo0 { + regulator-name = "vreg_pmu_io"; + }; + + vreg_pmu_xo: ldo1 { + regulator-name = "vreg_pmu_xo"; + }; + + vreg_pmu_rf: ldo2 { + regulator-name = "vreg_pmu_rf"; + }; + + vreg_pmu_ch0: ldo3 { + regulator-name = "vreg_pmu_ch0"; + }; + + vreg_pmu_ch1: ldo4 { + regulator-name = "vreg_pmu_ch1"; + }; + }; + }; }; &apps_rsc { @@ -387,6 +425,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/sm8150/a640_zap.mbn"; +}; + &i2c4 { clock-frequency = <100000>; @@ -478,15 +520,11 @@ qcom,dual-dsi-mode; qcom,master-dsi; +}; - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; }; &mdss_dsi0_phy { @@ -500,18 +538,15 @@ qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; status = "okay"; +}; - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_b>; - data-lanes = <0 1 2 3>; - }; - }; - }; +&mdss_dsi1_out { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; }; &mdss_dsi1_phy { @@ -601,6 +636,10 @@ status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; @@ -633,12 +672,97 @@ bias-disable; }; + qup_uart13_default: qup-uart13-default-state { + cts-pins { + pins = "gpio43"; + function = "qup13"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio44"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio46"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_uart13_sleep: qup-uart13-sleep-state { + cts-pins { + pins = "gpio43"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio50"; + function = "gpio"; + bias-pull-down; + }; }; &uart2 { status = "okay"; }; +&uart13 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&qup_uart13_default>; + pinctrl-1 = <&qup_uart13_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_pmu_io>; + vddxo-supply = <&vreg_pmu_xo>; + vddrf-supply = <&vreg_pmu_rf>; + vddch0-supply = <&vreg_pmu_ch0>; + }; +}; + &ufs_mem_hc { status = "okay"; @@ -712,12 +836,16 @@ }; &wifi { - status = "okay"; - + /* SoC */ vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; - vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; - qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk"; + /* WiFi / BT PMU */ + vdd-1.8-xo-supply = <&vreg_pmu_xo>; + vdd-1.3-rfa-supply = <&vreg_pmu_rf>; + vdd-3.3-ch0-supply = <&vreg_pmu_ch0>; + vdd-3.3-ch1-supply = <&vreg_pmu_ch1>; + + qcom,calibration-variant = "Qualcomm_sm8150hdk"; + + status = "okay"; }; |