diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pmcx0102.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pmcx0102.dtsi | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/pmcx0102.dtsi b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi new file mode 100644 index 000000000000..db2da9ef4f01 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmcx0102-c0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_c_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102-c1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_c_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102_d0_thermal: pmcx0102-d0-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_d_e0_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmcx0102-d1-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pmcx0102_d_e1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + pmcx0102_c_e0: pmic@2 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_c_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_c_e0_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_c_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmcx0102_d_e0: pmic@3 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_d_e0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_d_e0_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_d_e0_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&spmi_bus1 { + pmcx0102_c_e1: pmic@2 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_c_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_c_e1_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_c_e1_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmcx0102_d_e1: pmic@3 { + compatible = "qcom,pmcx0102", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmcx0102_d_e1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmcx0102_d_e1_gpios: gpio@8800 { + compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmcx0102_d_e1_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; |