diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts index 9d65fa58ba92..677e4e286ac0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts @@ -21,6 +21,76 @@ }; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + +&bosch_accel { + status = "okay"; +}; + +&bosch_magn { + status = "okay"; +}; + +&blsp_i2c6 { + /* pmic@34 is on i2c_nfc instead */ + /delete-node/ pmic@34; + + nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; + + en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; + + pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; + pinctrl-names = "default"; + }; +}; + +&i2c_nfc { + /* nfc@27 is on &blsp_i2c6 */ + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &mpss_mem { /* Firmware for gprimeltecan needs more space */ reg = <0x0 0x86800000 0x0 0x5400000>; |