diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq9574.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq9574.dtsi | 203 |
1 files changed, 148 insertions, 55 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 942290028972..622cfa96ed2b 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -56,7 +56,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -69,7 +68,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -82,7 +80,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -95,7 +92,6 @@ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; - cpu-supply = <&ipq9574_s1>; #cooling-cells = <2>; }; @@ -378,6 +374,8 @@ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; + qcom,num-ees = <4>; + num-channels = <16>; qcom,controlled-remotely; }; @@ -465,6 +463,15 @@ clock-names = "iface", "core", "xo", "ice"; non-removable; supports-cqe; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "disabled"; }; @@ -673,6 +680,33 @@ status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1c000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: spi@79b0000 { + compatible = "qcom,ipq9574-snand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", "aon", "iom"; + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + usb_0_qusbphy: phy@7b000 { compatible = "qcom,ipq9574-qusb2-phy"; reg = <0x0007b000 0x180>; @@ -736,8 +770,14 @@ assigned-clock-rates = <200000000>, <24000000>; - interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event"; + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; resets = <&gcc GCC_USB_BCR>; status = "disabled"; @@ -876,12 +916,18 @@ pcie1: pcie@10000000 { compatible = "qcom,pcie-ipq9574"; - reg = <0x10000000 0xf1d>, - <0x10000f20 0xa8>, - <0x10001000 0x1000>, - <0x000f8000 0x4000>, - <0x10100000 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x10001000 0x1000>, + <0x000f8000 0x4000>, + <0x10100000 0x1000>, + <0x000fe000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -911,10 +957,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE1_AXI_M_CLK>, <&gcc GCC_PCIE1_AXI_S_CLK>, @@ -956,12 +1002,18 @@ pcie3: pcie@18000000 { compatible = "qcom,pcie-ipq9574"; - reg = <0x18000000 0xf1d>, - <0x18000f20 0xa8>, - <0x18001000 0x1000>, - <0x000f0000 0x4000>, - <0x18100000 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; + reg = <0x18000000 0xf1d>, + <0x18000f20 0xa8>, + <0x18001000 0x1000>, + <0x000f0000 0x4000>, + <0x18100000 0x1000>, + <0x000f6000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; device_type = "pci"; linux,pci-domain = <3>; bus-range = <0x00 0xff>; @@ -972,14 +1024,14 @@ ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>, <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -991,10 +1043,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE3_AXI_M_CLK>, <&gcc GCC_PCIE3_AXI_S_CLK>, @@ -1036,12 +1088,18 @@ pcie2: pcie@20000000 { compatible = "qcom,pcie-ipq9574"; - reg = <0x20000000 0xf1d>, - <0x20000f20 0xa8>, - <0x20001000 0x1000>, - <0x00088000 0x4000>, - <0x20100000 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, + <0x20001000 0x1000>, + <0x00088000 0x4000>, + <0x20100000 0x1000>, + <0x0008e000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; device_type = "pci"; linux,pci-domain = <2>; bus-range = <0x00 0xff>; @@ -1071,10 +1129,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE2_AXI_M_CLK>, <&gcc GCC_PCIE2_AXI_S_CLK>, @@ -1114,14 +1172,20 @@ status = "disabled"; }; - pcie0: pci@28000000 { + pcie0: pcie@28000000 { compatible = "qcom,pcie-ipq9574"; - reg = <0x28000000 0xf1d>, - <0x28000f20 0xa8>, - <0x28001000 0x1000>, - <0x00080000 0x4000>, - <0x28100000 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; + reg = <0x28000000 0xf1d>, + <0x28000f20 0xa8>, + <0x28001000 0x1000>, + <0x00080000 0x4000>, + <0x28100000 0x1000>, + <0x00086000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -1150,10 +1214,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE0_AXI_M_CLK>, <&gcc GCC_PCIE0_AXI_S_CLK>, @@ -1193,6 +1257,35 @@ status = "disabled"; }; + nsscc: clock-controller@39b00000 { + compatible = "qcom,ipq9574-nsscc"; + reg = <0x39b00000 0x80000>; + clocks = <&xo_board_clk>, + <&cmn_pll NSS_1200MHZ_CLK>, + <&cmn_pll PPE_353MHZ_CLK>, + <&gcc GPLL0_OUT_AUX>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&gcc GCC_NSSCC_CLK>; + clock-names = "xo", + "nss_1200", + "ppe_353", + "gpll0_out", + "uniphy0_rx", + "uniphy0_tx", + "uniphy1_rx", + "uniphy1_tx", + "uniphy2_rx", + "uniphy2_tx", + "bus"; + #clock-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; }; thermal-zones { |