diff options
Diffstat (limited to 'arch/arm/boot/dts/ti')
64 files changed, 2424 insertions, 532 deletions
diff --git a/arch/arm/boot/dts/ti/davinci/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts index 1f5cd35f8b74..38a191fb0414 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-evm.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts @@ -60,7 +60,7 @@ sync-edge = <0>; sync-ctrl = <1>; raster-order = <0>; - fifo-th = <0>; + fifo-th = <1>; }; display-timings { diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts index 4df10379ff22..173401c58d53 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts @@ -412,14 +412,14 @@ status = "okay"; /* Don't pull down battery voltage adc io channel */ - batt_volt_en { + batt-volt-en-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; /* Don't impede Bluetooth clock signal */ - bt_clock_en { + bt-clock-en-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; @@ -433,19 +433,19 @@ * anything, but they are present in the source code from LEGO. */ - bt_pic_en { + bt-pic-en-hog { gpio-hog; gpios = <51 GPIO_ACTIVE_HIGH>; output-low; }; - bt_pic_rst { + bt-pic-rst-hog { gpio-hog; gpios = <78 GPIO_ACTIVE_HIGH>; output-high; }; - bt_pic_cts { + bt-pic-cts-hog { gpio-hog; gpios = <87 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile index 95c68135dd0c..3a4d9204339b 100644 --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -80,19 +80,26 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb \ + omap4-samsung-espresso7.dtb \ + omap4-samsung-espresso10.dtb \ omap4-xyboard-mz609.dtb \ omap4-xyboard-mz617.dtb + +am335x-bonegreen-hdmi-00a0-dtbs := am335x-bonegreen-eco.dtb \ + am335x-bone-hdmi-00a0.dtbo + dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir2110.dtb \ am335x-baltos-ir3220.dtb \ am335x-baltos-ir5221.dtb \ - am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-boneblack-wireless.dtb \ am335x-boneblue.dtb \ am335x-bonegreen.dtb \ am335x-bonegreen-wireless.dtb \ + am335x-bonegreen-eco.dtb \ + am335x-bonegreen-hdmi-00a0.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ am335x-evm.dtb \ @@ -100,6 +107,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-guardian.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ + am335x-mba335x.dtb \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-myirtech-myd.dtb \ @@ -173,3 +181,11 @@ dtb-$(CONFIG_SOC_TI81XX) += \ dm8148-t410.dtb \ dm8168-evm.dtb \ dra62x-j5eco-evm.dtb + +# Enable support for device-tree overlays +DTC_FLAGS_am335x-bone += -@ +DTC_FLAGS_am335x-boneblack += -@ +DTC_FLAGS_am335x-boneblack-wireless += -@ +DTC_FLAGS_am335x-bonegreen += -@ +DTC_FLAGS_am335x-bonegreen-wireless += -@ +DTC_FLAGS_am335x-bonegreen-eco += -@ diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi index 049fd8e1b40f..a827153ba6bb 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi @@ -17,18 +17,19 @@ compatible = "gpio-leds"; - led-power { + led_power: led-power { label = "onrisc:red:power"; linux,default-trigger = "default-on"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; default-state = "on"; + panic-indicator; }; - led-wlan { + led_wlan: led-wlan { label = "onrisc:blue:wlan"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led-app { + led_app: led-app { label = "onrisc:green:app"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi index ae2e8dffbe04..afb38f023b83 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -45,6 +45,23 @@ startup-delay-us = <70000>; enable-active-high; }; + + mpcie_regulator: mpcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "mpcie-regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 4 0>; + enable-active-high; + regulator-boot-on; + }; + + mpcie_power_switch: mpcie-power-switch { + compatible = "regulator-output"; + regulator-name = "mpcie-power-switch"; + regulator-supplies = "vcc"; + vout-supply = <&mpcie_regulator>; + }; }; &am33xx_pinmux { @@ -269,7 +286,7 @@ vcc7-supply = <&vbat>; vccio-supply = <&vbat>; - ti,en-ck32k-xtal = <1>; + ti,en-ck32k-xtal; regulators { vrtc_reg: regulator@0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-base0033.dts b/arch/arm/boot/dts/ti/omap/am335x-base0033.dts deleted file mode 100644 index 46078af4b7a3..000000000000 --- a/arch/arm/boot/dts/ti/omap/am335x-base0033.dts +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION - * - * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz - */ - -#include "am335x-igep0033.dtsi" - -/ { - model = "IGEP COM AM335x on AQUILA Expansion"; - compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; - - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; - pinctrl-names = "default", "off"; - pinctrl-0 = <&nxp_hdmi_pins>; - pinctrl-1 = <&nxp_hdmi_off_pins>; - status = "okay"; - }; - - leds_base { - pinctrl-names = "default"; - pinctrl-0 = <&leds_base_pins>; - - compatible = "gpio-leds"; - - led0 { - label = "base:red:user"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ - default-state = "off"; - }; - - led1 { - label = "base:green:user"; - gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ - default-state = "off"; - }; - }; -}; - -&am33xx_pinmux { - nxp_hdmi_pins: nxp-hdmi-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) - >; - }; - nxp_hdmi_off_pins: nxp-hdmi-off-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ - >; - }; - - leds_base_pins: leds-base-pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */ - >; - }; -}; - -&lcdc { - status = "okay"; -}; - -&i2c0 { - eeprom: eeprom@50 { - compatible = "atmel,24c256"; - reg = <0x50>; - }; -}; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index c400b7b70d0d..1d83fc116b66 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -16,7 +16,7 @@ }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { @@ -212,12 +212,12 @@ status = "okay"; clock-frequency = <400000>; - tps: tps@24 { + tps: pmic@24 { reg = <0x24>; }; baseboard_eeprom: eeprom@50 { - compatible = "atmel,24c256"; + compatible = "atmel,24c32"; reg = <0x50>; vcc-supply = <&ldo4_reg>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-hdmi-00a0.dtso b/arch/arm/boot/dts/ti/omap/am335x-bone-hdmi-00a0.dtso new file mode 100644 index 000000000000..f43f44c79c96 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-hdmi-00a0.dtso @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * 2017 Copyright (c) Seeed Technology Inc. All right reserved. + * Author: Baozhu Zuo <zuobaozhu@gmail.com> + * Copyright (c) Bootlin 2026 + * + * This device tree overlay is compatible with the BeagleBone Black, Green + * and their subversions. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pinctrl/am33xx.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&it66121_out>; + }; + }; + }; + + clk_mcasp0_fixed: clk-mcasp0-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk-mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Green HDMI cape"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + sound_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&it66121>; + }; + }; +}; + +&am33xx_pinmux { + bb_lcd_pins: pinmux-bb-lcd-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) + >; + }; + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; +}; + +&i2c2 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + it66121: it66121 { + compatible = "ite,it66121"; + reg = <0x4d>; + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pins>; + + #sound-dai-cells = <0>; + + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <24>; + remote-endpoint = <&lcdc_0>; + }; + }; + + port@1 { + reg = <1>; + it66121_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&lcdc { + status = "okay"; + blue-and-red-wiring = "straight"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&it66121_in>; + }; + }; +}; + + +&mcasp0 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < 0 0 1 0 >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts index 16b567e3cb47..b4fdcf9c02b5 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts @@ -35,7 +35,7 @@ "P9_18 [spi0_d1]", "P9_17 [spi0_cs0]", "[mmc0_cd]", - "P8_42A [ecappwm0]", + "P9_42A [ecappwm0]", "P8_35 [lcd d12]", "P8_33 [lcd d13]", "P8_31 [lcd d14]", diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts index f579df4c2c54..d430f0bef165 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts @@ -13,7 +13,7 @@ compatible = "ti,am335x-bone-blue", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts new file mode 100644 index 000000000000..d21118cdb6c2 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025 Bootlin + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "Seeed Studio BeagleBone Green Eco"; + compatible = "seeed,am335x-bone-green-eco", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&buck1>; + }; + }; + + sys_5v: regulator-sys-5v { + compatible = "regulator-fixed"; + regulator-name = "sys_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-always-on; + }; +}; + +&usb0 { + interrupts-extended = <&intc 18>; + interrupt-names = "mc"; +}; + +&baseboard_eeprom { + vcc-supply = <&v3v3>; +}; + +&i2c0 { + /delete-node/ pmic@24; + + tps65214: pmic@30 { + compatible = "ti,tps65214"; + reg = <0x30>; + buck1-supply = <&sys_5v>; + buck2-supply = <&sys_5v>; + buck3-supply = <&sys_5v>; + ldo1-supply = <&sys_5v>; + ldo2-supply = <&sys_5v>; + + interrupt-parent = <&intc>; + interrupts = <7>; + pinctrl-0 = <&pmic_irq_pins_default>; + + regulators { + buck1: buck1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1298500>; + regulator-boot-on; + regulator-always-on; + }; + + buck2: buck2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3: buck3 { + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_1v8_1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_1v8_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&dp83867_0>; + ti,dual-emac-pvid = <1>; +}; + +&mac_sw { + pinctrl-0 = <&cpsw_b_default>; + pinctrl-1 = <&cpsw_b_sleep>; +}; + +&davinci_mdio_sw { + /delete-node/ ethernet-phy@0; + + dp83867_0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&am33xx_pinmux { + cpsw_b_default: cpsw-b-default-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + >; + }; + + cpsw_b_sleep: cpsw-b-sleep-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts index 648e97fe1dfd..ae5bc5898497 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts @@ -12,7 +12,7 @@ "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts index 06767ea164b5..ece7f7854f6a 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts @@ -483,8 +483,6 @@ status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; - /* 16 serializers */ - num-serializer = <16>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 >; diff --git a/arch/arm/boot/dts/ti/omap/am335x-evm.dts b/arch/arm/boot/dts/ti/omap/am335x-evm.dts index 61bf8bcd4c4e..856fa1191ed2 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-evm.dts @@ -23,7 +23,7 @@ }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; vbat: fixedregulator0 { @@ -388,7 +388,7 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; - + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts index eba888dcd60e..d8baccdf8bc4 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts @@ -30,7 +30,7 @@ }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; vbat: fixedregulator0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts index 4b070e634b28..6ce3a2d029ee 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts @@ -14,7 +14,7 @@ compatible = "bosch,am335x-guardian", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; tick-timer = &timer2; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts index 6f0f4fba043b..ba488bba6925 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts @@ -22,7 +22,7 @@ }; chosen { - stdout-path = &uart3; + stdout-path = "serial3:115200n8"; }; vbat: fixedregulator0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts new file mode 100644 index 000000000000..8c0b2a1c99b1 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts @@ -0,0 +1,633 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Authors: Gregor Herburger, Matthias Schiffer + * + * Based on: + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am335x-tqma335x.dtsi" + +/ { + model = "TQ-Systems TQMa335x[L] SoM on MBa335x carrier board"; + compatible = "tq,tqma3359-mba335x", "tq,tqma3359", "ti,am33xx"; + chassis-type = "embedded"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 58 61 66 75 90 125 170 255>; + default-brightness-level = <7>; + enable-gpios = <&expander1 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_mba335x_12v>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-s5 { + label = "S5"; + linux,code = <BTN_0>; + gpios = <&expander2 0 GPIO_ACTIVE_LOW>; + }; + + button-s6 { + label = "S6"; + linux,code = <BTN_1>; + gpios = <&expander2 1 GPIO_ACTIVE_LOW>; + }; + + button-s7 { + label = "S7"; + linux,code = <BTN_2>; + gpios = <&expander2 2 GPIO_ACTIVE_LOW>; + }; + }; + + reg_mba335x_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "MBa335x-V12"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "tqm-tlv320aic32"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Line", "Line Out", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Line Out", "LOL", + "Line Out", "LOR", + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "Line In", "IN1_L", + "Line In", "IN1_R"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + #sound-dai-cells = <0>; + system-clock-direction-out; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic32x4>; + system-clock-frequency = <24000000>; + system-clock-direction-out; + }; + }; +}; + +&am33xx_pinmux { + codec_pins: codec-pins { + pinctrl-single,pins = < + /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) + >; + }; + + cpsw_default_pins: cpsw-default-pins { + pinctrl-single,pins = < + /* Port 1 */ + /* mii1_tx_en.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_rx_dv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_tx_clk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_rx_clk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) + + /* Port 2 */ + /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) + >; + }; + + cpsw_sleep_pins: cpsw-sleep-pins { + pinctrl-single,pins = < + /* Port 1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + + /* Port 2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + davinci_mdio_default_pins: davinci_mdio-default-pins { + pinctrl-single,pins = < + /* mdio.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + /* mdc.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; + + davinci_mdio_sleep_pins: davinci_mdio-sleep-pins { + pinctrl-single,pins = < + /* mdio.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP, MUX_MODE7) + /* mdc.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + davinci_mdio_phy0_pins: davinci_mdio-phy0-pins { + pinctrl-single,pins = < + /* usb0_drvvbus.gpio0_18 - PHY interrupt */ + AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_INPUT, MUX_MODE7) + >; + }; + + davinci_mdio_phy1_pins: davinci_mdio-phy1-pins { + pinctrl-single,pins = < + /* gpmc_csn0.gpio1_29 - PHY interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7) + >; + }; + + dcan0_pins: dcan0-pins { + pinctrl-single,pins = < + /* uart1_ctsn.d_can0_tx */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* uart1_rtsn.d_can0_rx */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + dcan1_pins: dcan1-pins { + pinctrl-single,pins = < + /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + ecap2_pins: ecap2-pins { + pinctrl-single,pins = < + /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE4) + >; + }; + + expander1_pins: expander1-pins { + pinctrl-single,pins = < + /* gpmc_csn3.gpio2_0 - interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7 ) + >; + }; + + expander2_pins: expander2-pins { + pinctrl-single,pins = < + /* gpmc_ben1.gpio1_28 - interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + i2c1_pins: i2c1-pins { + pinctrl-single,pins = < + /* uart1_rxd.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE3) + /* uart1_txd.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE3) + >; + }; + + lcd_pins: lcd-pins { + pinctrl-single,pins = < + /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) + /* lcd_data0.lcd_data0 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + /* lcd_data1.lcd_data1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + /* lcd_data2.lcd_data2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + /* lcd_data3.lcd_data3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + /* lcd_data4.lcd_data4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + /* lcd_data5.lcd_data5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + /* lcd_data6.lcd_data6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + /* lcd_data7.lcd_data7 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + /* lcd_data8.lcd_data8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + /* lcd_data9.lcd_data9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + /* lcd_data10.lcd_data10 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + /* lcd_data11.lcd_data11 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + /* lcd_data12.lcd_data12 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + /* lcd_data13.lcd_data13 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + /* lcd_data14.lcd_data14 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + /* lcd_data15.lcd_data15 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + /* lcd_vsync.lcd_vsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + /* lcd_hsync.lcd_hsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + /* lcd_pclk.lcd_pclk */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_aclkx.mcasp0_aclkx*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_axr1.mcasp0_axr1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_aclkr.mcasp0_aclkr */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_fsr.mcasp0_fsr */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT_PULLDOWN, MUX_MODE0) + >; + }; + + mmc1_pins: mmc1-pins { + pinctrl-single,pins = < + /* mmc0_dat3.mmc0_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat2.mmc0_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat1.mmc0_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat0.mmc0_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + polytouch_pins: polytouch-pins { + pinctrl-single,pins = < + /* gpmc_clk.gpio2_1 - touch interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + uart0_pins: uart0-pins { + pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart3_pins: uart3-pins { + pinctrl-single,pins = < + /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) + /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + >; + }; + + uart4_pins: uart4-pins { + pinctrl-single,pins = < + /* gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) + /* gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) + >; + }; +}; + +&cpsw_port1 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <2>; +}; + +&davinci_mdio_sw { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default_pins>; + pinctrl-1 = <&davinci_mdio_sleep_pins>; + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_phy0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-ps = <1860>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_phy1_pins>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-ps = <1860>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; +}; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&ds1339 { + interrupt-parent = <&expander2>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; +}; + +&ecap2 { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; +}; + +&i2c0 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&codec_pins>; + clocks = <&clk_24mhz>; + clock-names = "mclk"; + iov-supply = <&vcc3v3>; + ldoin-supply = <&vcc3v3>; + #sound-dai-cells = <0>; + }; + + jc42_2: temperature-sensor@19 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander1: gpio@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&expander1_pins>; + vcc-supply = <&vcc3v3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + + expander2: gpio@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&expander2_pins>; + vcc-supply = <&vcc3v3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom3: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + vcc-supply = <&vcc3v3>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + +&lcdc { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + blue-and-red-wiring = "crossed"; +}; + +&mac_sw { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default_pins>; + pinctrl-1 = <&cpsw_sleep_pins>; + status = "okay"; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + #sound-dai-cells = <0>; + op-mode = <0>; + tdm-slots = <2>; + /* 16 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 1 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&tps { + interrupt-parent = <&expander2>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; +}; + +&usb1 { + /* Should be "otg", but role switching currently doesn't work */ + dr_mode = "peripheral"; +}; + +/* SOM supply */ +&vcc3v3in { + vin-supply = <&vcc3v3>; +}; diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts index fd91a3c01a63..476a6bdaf43f 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts @@ -15,7 +15,7 @@ compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; clk12m: clk12m { @@ -143,7 +143,7 @@ sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg =<0xa>; + reg = <0xa>; clocks = <&clk12m>; micbias-resistor-k-ohms = <4>; micbias-voltage-m-volts = <2250>; @@ -155,7 +155,7 @@ tda9988: tda9988@70 { compatible = "nxp,tda998x"; - reg =<0x70>; + reg = <0x70>; audio-ports = <TDA998x_I2S 1>; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts index 56929059f5af..d51cdd6e1ab4 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts @@ -167,7 +167,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; status = "okay"; - rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; @@ -178,7 +178,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; status = "okay"; - rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rts-delay = <1 1>; linux,rs485-enabled-at-boot-time; @@ -187,7 +187,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; - rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; @@ -198,7 +198,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; - rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts index f66d57bb685e..f0519ab30141 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts @@ -222,10 +222,10 @@ "ModeA1", "ModeA2", "ModeA3", - "NC", - "NC", - "NC", - "NC", + "ModeB0", + "ModeB1", + "ModeB2", + "ModeB3", "NC", "NC", "NC", diff --git a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts index d28d39728847..23caaaabf351 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts @@ -147,7 +147,7 @@ }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index ded19e24e666..9f611debc209 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -21,7 +21,7 @@ compatible = "ti,am33xx"; chosen { - stdout-path = &uart3; + stdout-path = "serial3:115200n8"; }; cpus { @@ -256,8 +256,9 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; - rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; + rs485-rx-during-tx; rs485-rts-delay = <0 0>; linux,rs485-enabled-at-boot-time; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts index e7d561a527fd..10d54e0ad15a 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts @@ -347,7 +347,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wireless_pins>; - vmmmc-supply = <&v3v3c_reg>; + vmmc-supply = <&v3v3c_reg>; bus-width = <4>; non-removable; dmas = <&edma_xbar 12 0 1 diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts index 78ce860e59b3..24d9f90fad01 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts @@ -15,7 +15,7 @@ compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts index 7c9f65126c63..8b47f45a9959 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts @@ -87,7 +87,6 @@ bus-width = <4>; non-removable; cap-power-off-card; - ti,needs-special-hs-handling; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts index 757ebd96b3f0..1dc4e344efd6 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts @@ -25,7 +25,7 @@ }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { @@ -109,7 +109,7 @@ audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; /* 24.576MHz */ + clock-frequency = <24576000>; /* 24.576MHz */ }; audio_mclk: audio_mclk_gate@0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi new file mode 100644 index 000000000000..b75949f0f023 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany. + * Authors: Gregor Herburger, Matthias Schiffer + * + * Based on: + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include "am33xx.dtsi" + +/ { + compatible = "tq,tqma3359", "ti,am33xx"; + + aliases { + mmc0 = &mmc2; + mmc1 = &mmc1; + /delete-property/ mmc2; + rtc0 = &tps; + rtc1 = &ds1339; + rtc2 = &rtc; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* SOM input voltage */ + vcc3v3in: regulator-vcc3v3in { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3IN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* + * Regulator is enabled by PMIC power sequence. The supplied voltage + * rail is also usable on baseboard. + */ + vddshv: regulator-vddshv { + compatible = "regulator-fixed"; + regulator-name = "VDDSHV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vcc3v3in>; + }; +}; + +&am33xx_pinmux { + i2c0_pins: i2c0-pins { + pinctrl-single,pins = < + /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + mmc2_pins: mmc2-pins { + pinctrl-single,pins = < + /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) + /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + spi0_pins: spi0-pins { + pinctrl-single,pins = < + /* spi0_sclk.spi0_sclk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) + /* spi0_d0.spi0_d0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE0) + /* spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0) + >; + }; +}; + +&cpu { + cpu0-supply = <&vdd1_reg>; +}; + +&elm { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + /* optional, not on TQMa335xL */ + jc42_1: temperature-sensor@1f { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1f>; + }; + + tps: pmic@2d { + reg = <0x2d>; + ti,en-ck32k-xtal; + /* Filled in by tps65910.dtsi */ + }; + + /* optional, not on TQMa335xL */ + eeprom: eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&vddshv>; + }; + + /* optional, not on TQMa335xL */ + se97btp: eeprom@57 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + vcc-supply = <&vddshv>; + }; + + /* optional, not on TQMa335xL */ + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +#include "../../tps65910.dtsi" + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + vmmc-supply = <&vddshv>; + non-removable; + status = "okay"; +}; + +&rtc { + status = "disabled"; +}; + +&tps { + vcc1-supply = <&vcc3v3in>; + vcc2-supply = <&vcc3v3in>; + vcc3-supply = <&vcc3v3in>; + vcc4-supply = <&vcc3v3in>; + vcc5-supply = <&vcc3v3in>; + vcc6-supply = <&vcc3v3in>; + vcc7-supply = <&vcc3v3in>; + vccio-supply = <&vcc3v3in>; +}; + +/* TPS outputs */ +&vrtc_reg { + regulator-always-on; +}; + +&vio_reg { + regulator-always-on; +}; + +&vdd1_reg { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; +}; + +&vdd2_reg { + regulator-name = "vdd_core"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; +}; + +&vdd3_reg { + regulator-always-on; +}; + +&vdig1_reg { + regulator-always-on; +}; + +&vdig2_reg { + regulator-always-on; +}; + +&vpll_reg { + regulator-always-on; +}; + +&vdac_reg { + regulator-always-on; +}; + +&vaux1_reg { + regulator-always-on; +}; + +&vaux2_reg { + regulator-always-on; +}; + +&vaux33_reg { + regulator-always-on; +}; + +&vmmc_reg { + regulator-always-on; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <24000000>; + vcc-supply = <&vddshv>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&usb0_phy { + vcc-supply = <&vaux1_reg>; +}; + +&usb1_phy { + vcc-supply = <&vaux1_reg>; +}; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi index d6a143abae5f..89d16fcc773e 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi @@ -200,7 +200,7 @@ ranges = <0x0 0x9000 0x1000>; uart0: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <72>; @@ -1108,7 +1108,7 @@ ranges = <0x0 0x22000 0x1000>; uart1: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <73>; @@ -1139,7 +1139,7 @@ ranges = <0x0 0x24000 0x1000>; uart2: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <74>; @@ -1457,10 +1457,10 @@ gpio1: gpio@0 { compatible = "ti,omap4-gpio"; - gpio-ranges = <&am33xx_pinmux 0 0 8>, - <&am33xx_pinmux 8 90 4>, - <&am33xx_pinmux 12 12 16>, - <&am33xx_pinmux 28 30 4>; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1501,7 +1501,6 @@ mmc1: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; @@ -1770,7 +1769,7 @@ ranges = <0x0 0xa6000 0x1000>; uart3: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <44>; @@ -1799,7 +1798,7 @@ ranges = <0x0 0xa8000 0x1000>; uart4: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <45>; @@ -1828,7 +1827,7 @@ ranges = <0x0 0xaa000 0x1000>; uart5: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <46>; @@ -1987,7 +1986,6 @@ mmc2: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; dmas = <&edma 2 0 &edma 3 0>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi index 0614ffdc1578..ca3e7f5d7d0d 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi @@ -45,7 +45,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a8"; enable-method = "ti,am3352"; device_type = "cpu"; @@ -338,7 +338,6 @@ mmc3: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; interrupts = <29>; reg = <0x0 0x1000>; status = "disabled"; @@ -461,10 +460,10 @@ cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x0000 0x1000>, - <0x2000 0x1000>, - <0x3000 0x1000>, - <0x4000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/am3703.dtsi b/arch/arm/boot/dts/ti/omap/am3703.dtsi deleted file mode 100644 index 2b994ae790c9..000000000000 --- a/arch/arm/boot/dts/ti/omap/am3703.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de> - */ - -#include "omap36xx.dtsi" - -&iva { - status = "disabled"; -}; - -&sgx_module { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/ti/omap/am3715.dtsi b/arch/arm/boot/dts/ti/omap/am3715.dtsi deleted file mode 100644 index ab328e8c0bd8..000000000000 --- a/arch/arm/boot/dts/ti/omap/am3715.dtsi +++ /dev/null @@ -1,10 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de> - */ - -#include "omap36xx.dtsi" - -&iva { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi index 0a1df30f2818..504fa6b57d39 100644 --- a/arch/arm/boot/dts/ti/omap/am4372.dtsi +++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi @@ -321,7 +321,6 @@ mmc3: mmc@0 { compatible = "ti,am437-sdhci"; - ti,needs-special-reset; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0x1000>; status = "disabled"; diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi index fd4634f8c629..e08f356e71cb 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi @@ -1103,7 +1103,6 @@ mmc1: mmc@0 { compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; - ti,needs-special-reset; dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; @@ -1620,7 +1619,6 @@ mmc2: mmc@0 { compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; - ti,needs-special-reset; dmas = <&edma 2 0>, <&edma 3 0>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index e6a18954e449..43cf4ade950b 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -545,7 +545,6 @@ non-removable; mmc-pwrseq = <&emmc_pwrseq>; - ti,needs-special-reset; dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; @@ -561,7 +560,6 @@ /* DDR50: DDR up to 50 MHz (1.8 V signaling). */ status = "okay"; - ti,needs-special-reset; vmmc-supply = <&vdd_3v3>; cap-power-off-card; keep-power-in-suspend; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi index 994e69ab38d7..87b61a98d5e9 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi @@ -149,7 +149,7 @@ gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; #cooling-cells = <2>; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts index 3dd898955e76..77c9fbb3bfbd 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts @@ -481,7 +481,6 @@ vmmc-supply = <&vdd_3v3>; bus-width = <8>; ti,non-removable; - cap-mmc-dual-data-rate; }; &qspi { diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi index a8cd724ce4bc..27d1f35a31fd 100644 --- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi @@ -155,10 +155,10 @@ cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi index b68686f0643b..a1e0e904e0f0 100644 --- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi @@ -94,8 +94,8 @@ #address-cells = <1>; #size-cells = <0>; #pinctrl-cells = <1>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xf>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1f>; }; /* Device Configuration Registers */ @@ -643,10 +643,10 @@ cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index ba7fdaae9c6e..c8d325b0f57b 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -109,7 +109,6 @@ scm_conf1: scm_conf@1c04 { compatible = "syscon"; reg = <0x1c04 0x0020>; - #syscon-cells = <2>; }; scm_conf_pcie: scm_conf@1c24 { @@ -267,8 +266,8 @@ syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -279,8 +278,8 @@ syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -294,9 +293,9 @@ clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; @@ -328,7 +327,7 @@ ranges = <0 0 0x8000>; reg = <0x0 0x20>; - pcie1_phy: pciephy@4000 { + pcie1_phy: pcie-phy@4000 { compatible = "ti,phy-pipe3-pcie"; reg = <0x4000 0x80>, /* phy_rx */ <0x4400 0x64>; /* phy_tx */ @@ -348,7 +347,7 @@ #phy-cells = <0>; }; - pcie2_phy: pciephy@5000 { + pcie2_phy: pcie-phy@5000 { compatible = "ti,phy-pipe3-pcie"; reg = <0x5000 0x80>, /* phy_rx */ <0x5400 0x64>; /* phy_tx */ diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi index b709703f6c0d..711ce4c31bb1 100644 --- a/arch/arm/boot/dts/ti/omap/dra7.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi @@ -195,24 +195,22 @@ clock-names = "fck", "phy-clk", "phy-clk-div"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51000000 0x51000000 0x3000>, - <0x20000000 0x20000000 0x10000000>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - reg = <0x51000000 0x2000>, - <0x51002000 0x14c>, - <0x20001000 0x2000>; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, - <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -235,10 +233,7 @@ }; pcie1_ep: pcie_ep@51000000 { - reg = <0x51000000 0x28>, - <0x51002000 0x14c>, - <0x51001000 0x28>, - <0x20001000 0x10000000>; + reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; num-lanes = <1>; @@ -269,21 +264,19 @@ reset-names = "rstctrl"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51800000 0x51800000 0x3000>, - <0x30000000 0x30000000 0x10000000>; + ranges = <0x51800000 0x51800000 0x3000 + 0x0 0x30000000 0x10000000>; dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { - reg = <0x51800000 0x2000>, - <0x51802000 0x14c>, - <0x30001000 0x2000>; + reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, - <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x30013000 0x13000 0 0xffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts index f747ac56eb92..1d2df8128cfe 100644 --- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts @@ -83,10 +83,10 @@ compatible = "ti,lp8733"; reg = <0x60>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&evm_5v0>; - ldo1-in-supply =<&evm_5v0>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&evm_5v0>; + ldo1-in-supply = <&evm_5v0>; lp8733_regulators: regulators { lp8733_buck0_reg: buck0 { @@ -131,10 +131,10 @@ compatible = "ti,lp8732"; reg = <0x61>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&vsys_3v3>; - ldo1-in-supply =<&vsys_3v3>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; lp8732_regulators: regulators { lp8732_buck0_reg: buck0 { diff --git a/arch/arm/boot/dts/ti/omap/omap2430.dtsi b/arch/arm/boot/dts/ti/omap/omap2430.dtsi index b9a9e6e45266..222613d2a4d1 100644 --- a/arch/arm/boot/dts/ti/omap/omap2430.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap2430.dtsi @@ -332,7 +332,7 @@ interrupts = <93>; }; - wd_timer2: wdt@49016000 { + wd_timer2: watchdog@49016000 { compatible = "ti,omap2-wdt"; ti,hwmods = "wd_timer2"; reg = <0x49016000 0x80>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts index 08ee0f8ea68f..71b39a923d37 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts @@ -291,7 +291,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi index 07d5894ebb74..910e3b54f530 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi @@ -275,8 +275,8 @@ ethernet@6,0 { compatible = "davicom,dm9000"; - reg = <6 0x000 2>, - <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + reg = <6 0x000 2>, + <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ bank-width = <2>; interrupt-parent = <&gpio1>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi index a7f99ae0c1fe..78c657429f64 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi @@ -65,7 +65,7 @@ ti,debounce-max = /bits/ 16 <10>; ti,debounce-tol = /bits/ 16 <5>; ti,debounce-rep = /bits/ 16 <1>; - ti,keep-vref-on = <1>; + ti,keep-vref-on; ti,settle-delay-usec = /bits/ 16 <150>; wakeup-source; diff --git a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi index e27837093e43..70e33cdd519a 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi @@ -205,7 +205,7 @@ /* T2_GPIO_2 low to route GPIO_61 to on-board devices */ &twl_gpio { - en_on_board_gpio_61 { + en-on-board-gpio-61-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/ti/omap/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts index 4bde3342bb95..7db73d9bed9e 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-n900.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts @@ -508,7 +508,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; @@ -816,8 +816,6 @@ reg = <0x0c>; VANA-supply = <&vaux4>; - - #io-channel-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts index 07bec48dc441..959fdeeb769e 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts @@ -57,8 +57,8 @@ &mmc1_aux_pins >; - wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ - cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ + cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ }; &dss { diff --git a/arch/arm/boot/dts/ti/omap/omap3.dtsi b/arch/arm/boot/dts/ti/omap/omap3.dtsi index 92cd4c99dae7..959069e24730 100644 --- a/arch/arm/boot/dts/ti/omap/omap3.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3.dtsi @@ -553,7 +553,7 @@ status = "disabled"; }; - wdt2: wdt@48314000 { + wdt2: watchdog@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; ti,hwmods = "wd_timer2"; @@ -862,14 +862,14 @@ #size-cells = <1>; ranges; - usbhsohci: ohci@48064400 { + usbhsohci: usb@48064400 { compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; interrupts = <76>; remote-wakeup-connected; }; - usbhsehci: ehci@48064800 { + usbhsehci: usb@48064800 { compatible = "ti,ehci-omap"; reg = <0x48064800 0x400>; interrupts = <77>; diff --git a/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi deleted file mode 100644 index 6e754d265f18..000000000000 --- a/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi +++ /dev/null @@ -1,237 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for OMAP3430 ES1 clock data - * - * Copyright (C) 2013 Texas Instruments, Inc. - */ -&cm_clocks { - gfx_l3_ck: gfx_l3_ck@b10 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&l3_ick>; - reg = <0x0b10>; - ti,bit-shift = <0>; - }; - - gfx_l3_fck: gfx_l3_fck@b40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l3_ick>; - ti,max-div = <7>; - reg = <0x0b40>; - ti,index-starts-at-one; - }; - - gfx_l3_ick: gfx_l3_ick { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&gfx_l3_ck>; - clock-mult = <1>; - clock-div = <1>; - }; - - gfx_cg1_ck: gfx_cg1_ck@b00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&gfx_l3_fck>; - reg = <0x0b00>; - ti,bit-shift = <1>; - }; - - gfx_cg2_ck: gfx_cg2_ck@b00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&gfx_l3_fck>; - reg = <0x0b00>; - ti,bit-shift = <2>; - }; - - clock@a00 { - compatible = "ti,clksel"; - reg = <0xa00>; - #clock-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - d2d_26m_fck: clock-d2d-26m-fck@3 { - reg = <3>; - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clock-output-names = "d2d_26m_fck"; - clocks = <&sys_ck>; - }; - - fshostusb_fck: clock-fshostusb-fck@5 { - reg = <5>; - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clock-output-names = "fshostusb_fck"; - clocks = <&core_48m_fck>; - }; - - ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1@0 { - reg = <0>; - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clock-output-names = "ssi_ssr_gate_fck_3430es1"; - clocks = <&corex2_fck>; - }; - }; - - clock@a40 { - compatible = "ti,clksel"; - reg = <0xa40>; - #clock-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1@8 { - reg = <8>; - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clock-output-names = "ssi_ssr_div_fck_3430es1"; - clocks = <&corex2_fck>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; - }; - - usb_l4_div_ick: clock-usb-l4-div-ick@4 { - reg = <4>; - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clock-output-names = "usb_l4_div_ick"; - clocks = <&l4_ick>; - ti,max-div = <1>; - ti,index-starts-at-one; - }; - }; - - ssi_ssr_fck: ssi_ssr_fck_3430es1 { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>; - }; - - ssi_sst_fck: ssi_sst_fck_3430es1 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&ssi_ssr_fck>; - clock-mult = <1>; - clock-div = <2>; - }; - - clock@a10 { - compatible = "ti,clksel"; - reg = <0xa10>; - #clock-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1@4 { - reg = <4>; - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clock-output-names = "hsotgusb_ick_3430es1"; - clocks = <&core_l3_ick>; - }; - - fac_ick: clock-fac-ick@8 { - reg = <8>; - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clock-output-names = "fac_ick"; - clocks = <&core_l4_ick>; - }; - - ssi_ick: clock-ssi-ick-3430es1@0 { - reg = <0>; - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clock-output-names = "ssi_ick_3430es1"; - clocks = <&ssi_l4_ick>; - }; - - usb_l4_gate_ick: clock-usb-l4-gate-ick@5 { - reg = <5>; - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clock-output-names = "usb_l4_gate_ick"; - clocks = <&l4_ick>; - }; - }; - - ssi_l4_ick: ssi_l4_ick { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&l4_ick>; - clock-mult = <1>; - clock-div = <1>; - }; - - usb_l4_ick: usb_l4_ick { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; - }; - - clock@e00 { - compatible = "ti,clksel"; - reg = <0xe00>; - #clock-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - dss1_alwon_fck: clock-dss1-alwon-fck-3430es1@0 { - reg = <0>; - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clock-output-names = "dss1_alwon_fck_3430es1"; - clocks = <&dpll4_m4x2_ck>; - ti,set-rate-parent; - }; - }; - - dss_ick: dss_ick_3430es1@e10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&l4_ick>; - reg = <0x0e10>; - ti,bit-shift = <0>; - }; -}; - -&cm_clockdomains { - core_l3_clkdm: core_l3_clkdm { - compatible = "ti,clockdomain"; - clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>; - }; - - gfx_3430es1_clkdm: gfx_3430es1_clkdm { - compatible = "ti,clockdomain"; - clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>; - }; - - dss_clkdm: dss_clkdm { - compatible = "ti,clockdomain"; - clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>, - <&dss1_alwon_fck>, <&dss_ick>; - }; - - d2d_clkdm: d2d_clkdm { - compatible = "ti,clockdomain"; - clocks = <&d2d_26m_fck>; - }; - - core_l4_clkdm: core_l4_clkdm { - compatible = "ti,clockdomain"; - clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>, - <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>, - <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>, - <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>, - <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>, - <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>, - <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>, - <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>, - <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, - <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>; - }; -}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts index c90f43cc2fae..673df1b693f2 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts @@ -229,6 +229,11 @@ interrupts = <11>; }; + pwrbutton { + compatible = "ti,twl6030-pwrbutton"; + interrupts = <0>; + }; + ldo2: regulator-ldo2 { compatible = "ti,twl6032-ldo2"; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi index 59f546a278f8..78ac3d4eceb5 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi @@ -279,7 +279,7 @@ ranges = <0x0 0x30000 0x1000>, <0x49030000 0x49030000 0x1000>; - wdt3: wdt@0 { + wdt3: watchdog@0 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; reg = <0x0 0x80>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi index 3fcef3080eae..4c78a0b28fab 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi @@ -72,13 +72,13 @@ #size-cells = <1>; }; - omap_control_usb2phy: control-phy@300 { + omap_control_usb2phy: phy@300 { compatible = "ti,control-phy-usb2"; reg = <0x300 0x4>; reg-names = "power"; }; - omap_control_usbotg: control-phy@33c { + omap_control_usbotg: phy@33c { compatible = "ti,control-phy-otghs"; reg = <0x33c 0x4>; reg-names = "otghs_control"; @@ -302,14 +302,14 @@ "refclk_60m_ext_p1", "refclk_60m_ext_p2"; - usbhsohci: ohci@800 { + usbhsohci: usb@800 { compatible = "ti,ohci-omap3"; reg = <0x800 0x400>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; remote-wakeup-connected; }; - usbhsehci: ehci@c00 { + usbhsehci: usb@c00 { compatible = "ti,ehci-omap"; reg = <0xc00 0x400>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; @@ -1133,7 +1133,7 @@ #size-cells = <1>; ranges = <0x0 0x4000 0x1000>; - wdt2: wdt@0 { + wdt2: watchdog@0 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; reg = <0x0 0x80>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; @@ -1414,7 +1414,7 @@ uart3: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1765,7 +1765,7 @@ uart1: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1794,7 +1794,7 @@ uart2: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; @@ -1823,7 +1823,7 @@ uart4: serial@0 { compatible = "ti,omap4-uart"; reg = <0x0 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts index 8fd076e5d1b0..4b8bfd0188ad 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts @@ -7,6 +7,11 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +/ { + model = "TI OMAP4 PandaBoard (A4)"; + compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi index 97706d6296a6..05c871d31d7b 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi @@ -130,6 +130,12 @@ clock-frequency = <19200000>; }; + wl12xx_pwrseq: wl12xx-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&twl 0>; + clock-names = "ext_clock"; + }; + /* regulator for wl12xx on sdio5 */ wl12xx_vmmc: wl12xx_vmmc { pinctrl-names = "default"; @@ -361,10 +367,8 @@ */ wl12xx_gpio: wl12xx-gpio-pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 - WLAN_EN */ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ >; }; @@ -387,6 +391,22 @@ OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ >; }; + + bt_pins: bt-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ + OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ + >; + }; + + uart2_pins: uart2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; }; &omap4_pmx_wkup { @@ -408,6 +428,7 @@ reg = <0x48>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + #clock-cells = <1>; system-power-controller; }; @@ -488,6 +509,7 @@ non-removable; bus-width = <4>; cap-power-off-card; + mmc-pwrseq = <&wl12xx_pwrseq>; #address-cells = <1>; #size-cells = <0>; @@ -523,8 +545,19 @@ }; &uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; + + bluetooth { + compatible = "ti,wl1271-st"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* GPIO_46 */ + clocks = <&twl 0>; + clock-names = "ext_clock"; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts index fe7b156d10ed..a933fe560834 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts @@ -49,22 +49,6 @@ OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ >; }; - - bt_pins: bt-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ - OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ - >; - }; - - uart2_pins: uart2-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ - OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ - OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - >; - }; }; &led_wkgpio_pins { @@ -96,19 +80,3 @@ &gpio1_target { ti,no-reset-on-init; }; - -&wl12xx_gpio { - pinctrl-single,pins = < - OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ - >; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins &bt_pins>; - bluetooth: tiwi { - compatible = "ti,wl1271-st"; - enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* GPIO_46 */ - }; -}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi new file mode 100644 index 000000000000..06651072f000 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi @@ -0,0 +1,744 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; +#include "dt-bindings/gpio/gpio.h" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + continuous_splash: framebuffer@bef00000{ + reg = <0xbef00000 (1024 * 600 * 4)>; + no-map; + }; + }; + + chosen { + stdout-path = &uart3; + #address-cells = <1>; + }; + + i2c-gpio5 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: SMB136 Charger for 7" variant at 0x4d */ + }; + + i2c-gpio6 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: STMPE811 ADC at 0x41 */ + }; + + i2c-gpio7 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + pinctrl-0 = <&fuel_alert_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <500>; + maxim,dead-volt = <2500>; + maxim,over-volt = <4300>; + }; + }; + + reg_espresso_wlan: regulator-espresso-wlan { + pinctrl-names = "default"; + pinctrl-0 = <&wlanen_gpio>; + compatible = "regulator-fixed"; + regulator-name = "espresso_wlan"; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */ + startup-delay-us = <70000>; + regulator-always-on; + enable-active-high; + }; + + wlan_pwrseq: wlan-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&twl 0>; + clock-names = "ext_clock"; + }; + + reg_espresso_internal: regulator-espresso-internal { + compatible = "regulator-fixed"; + regulator-name = "eMMC_LDO"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */ + startup-delay-us = <100000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + }; + + reg_espresso_external: regulator-espresso-external { + compatible = "regulator-fixed"; + regulator-name = "vmmc1"; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */ + enable-active-high; + }; + + reg_touch_ldo_en: regulator-touch-ldo-en { + compatible = "regulator-fixed"; + regulator-name = "touch_ldo_en"; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */ + regulator-always-on; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-power { + label = "power"; + + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */ + linux,code = <KEY_POWER>; + wakeup-source; + }; + + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "volume_up"; /* GPIO_wk30 */ + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + }; + + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume_down"; /* GPIO_wk8 */ + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd_en"; + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */ + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; + + pwm10: pwm-10 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_default>; + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer10>; + ti,clock-source = <0x00>; + }; + + lvds-encoder { + compatible = "doestek,dtc34lm85am", "lvds-encoder"; + powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */ + power-supply = <®_lcd>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */ + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&gpadc 4>; + shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */ + #io-channel-cells = <0>; + }; + + led-ir { + compatible = "gpio-ir-tx"; + gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */ + pinctrl-names = "default"; + pinctrl-0 = <&ledir_pins>; + }; +}; + +&omap4_pmx_wkup { + gpio_keys: gpio-keys-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x046, PIN_INPUT | MUX_MODE3) + /* sim_cd.gpio_wk3 - EXT_WAKEUP */ + OMAP4_IOPAD(0x056, PIN_INPUT | MUX_MODE3) + /* fref_clk3_req.gpio_wk30 - VOL_UP */ + OMAP4_IOPAD(0x05C, PIN_INPUT | MUX_MODE3) + /* fref_clk4_out.gpio_wk8 - VOL_DN */ + >; + }; +}; + +&omap4_pmx_core { + backlight_pins: pinmux-backlight-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) + /* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */ + >; + }; + + bluetooth_pins: pinmux-bluetooth-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + /* gpmc_ncs6.gpio_103 - BT_EN */ + OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3) + /* cam_strobe.gpio_82 - BT_nRST */ + OMAP4_IOPAD(0x0c0, PIN_INPUT | MUX_MODE3) + /* cam_globalreset.gpio_83 - BT_HOST_WAKE */ + OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3) + /* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */ + >; + }; + + dss_dpi_pins: pinmux-dss-dpi-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data11 */ + OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data3 */ + + OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data0 */ + >; + }; + + fuel_alert_irq: pinmux-fuel-alert-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_a20.gpio_44 */ + >; + }; + + i2c1_pins: pinmux-i2c1-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux-i2c3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux-i2c4-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c4_sda */ + >; + }; + + i2c5_pins: pinmux-i2c5-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0de, PIN_INPUT_PULLUP | MUX_MODE3) + /* usbc1_icusb_dp.gpio_98 */ + OMAP4_IOPAD(0x0e0, PIN_INPUT_PULLUP | MUX_MODE3) + /* usbc1_icusb_dm.gpio_99 */ + >; + }; + + i2c6_pins: pinmux-i2c6-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE3) + /* hdmi_ddc_scl.gpio_65 */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE3) + /* hdmi_ddc_sda.gpio_66 */ + >; + }; + + i2c7_pins: pinmux-i2c7-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x08a, PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_wait0.gpio_61 */ + OMAP4_IOPAD(0x08c, PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_wait1.gpio_62 */ + >; + }; + + ledir_pins: pimux-ledir-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x086, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_nbe0_cle.gpio_59 */ + OMAP4_IOPAD(0x156, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* mcspi4_simo.gpio_152 */ + >; + }; + + lvds_pins: pinmux-lvds-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3) + /* mcspi1_simo.gpio_136 - LVDS_nSHDN */ + >; + }; + + mmc1_pins: pinmux-mmc1-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0) + /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmcc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmcc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux-mmc2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat0 */ + OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat1 */ + OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat2 */ + OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat3 */ + OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat4 */ + OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat5 */ + OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat6 */ + OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat7 */ + OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_clk */ + OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_cmd */ + >; + }; + + mmc5_pins: pinmux-mmc5-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0) + /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + pwm10_default: pinmux-pwm10-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1) + /* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */ + >; + }; + + touch_pins: pinmux-touch-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3) + /* gpmc_a22.gpio_46 - TSP_INT */ + >; + }; + + uart2_pins: pinmux-uart2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux-uart3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) + /* uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) + /* uart3_tx_irtx */ + >; + }; + + vibrator_default: pinmux-vibrator-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3) + /* gpmc_ad14.gpio_38 - MOTOR_EN */ + >; + }; + + wlanen_gpio: pinmux-wlanen-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + /* gpmc_ncs7.gpio_104 */ + >; + }; + + wlan_host_wake: pinmux-wlan-host-wake-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0bc, PIN_INPUT | MUX_MODE3) + /* cam_shutter.gpio_81 - WLAN_HOST_WAKE */ + >; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: pmic@48 { + reg = <0x48>; + #clock-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_pins + &twl6030_wkup_pins + >; + + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + system-power-controller; + }; +}; + +#include "twl6032.dtsi" +#include "twl6030_omap4.dtsi" + +&ldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldousb { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + vdd-supply = <&ldo4>; + vddio-supply = <&ldo5>; + interrupt-parent = <&gpio4>; + interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>, + <26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + }; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo4>; + iovdd-supply = <&ldo5>; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>; + }; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo4>; + vio-supply = <&ldo4>; + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x20>; + }; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&bridge_in>; + data-lines = <24>; + }; + }; +}; + +&twl_usb_comparator { + usb-supply = <&ldousb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <®_espresso_external>; + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <®_espresso_internal>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + vmmc-supply = <®_espresso_wlan>; + mmc-pwrseq = <&wlan_pwrseq>; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc5_pins>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake>; + }; +}; + +&uart2 { + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_pins>; + shutdown-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + device-wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts new file mode 100644 index 000000000000..558dc3c029e9 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include "omap4-samsung-espresso-common.dtsi" +#include <dt-bindings/power/summit,smb347-charger.h> +/ { + model = "Samsung Galaxy Tab 2 (10 inch)"; + compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4"; + + i2c-gpio5 { + smb347: charger@6 { + compatible = "summit,smb347"; + reg = <0x6>; // 0x0C >> 1 + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,chip-temperature-threshold-celsius = <120>; + summit,usb-current-limit-microamp = <1800000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&pwm10 0 1600 0>; + power-supply = <®_lcd>; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + panel { + compatible = "samsung,ltn101al03", "panel-lvds"; + power-supply = <®_lcd>; + width-mm = <223>; + height-mm = <125>; + data-mapping = "vesa-24"; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <69818000>; + + hback-porch = <64>; + hactive = <1280>; + hfront-porch = <16>; + hsync-len = <48>; + + vback-porch = <11>; + vactive = <800>; + vfront-porch = <16>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&i2c3 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + //avdd-supply = <®_touch_ldo_en>; + vdd-supply = <&ldo6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + syna,sensor-type = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts new file mode 100644 index 000000000000..cae37ff066c3 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include "omap4-samsung-espresso-common.dtsi" + +/ { + model = "Samsung Galaxy Tab 2 (7 inch)"; + compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4"; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&pwm10 0 1200 0>; + power-supply = <®_lcd>; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <2>; + }; + + panel { + compatible = "samsung,ltn070nl01", "panel-lvds"; + power-supply = <®_lcd>; + width-mm = <154>; + height-mm = <90>; + data-mapping = "vesa-24"; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <47255554>; + + hback-porch = <210>; + hactive = <1024>; + hfront-porch = <186>; + hsync-len = <50>; + + vback-porch = <11>; + vactive = <600>; + vfront-porch = <24>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + syncclk-active = <0>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&i2c3 { + touchscreen@48 { + compatible = "melfas,mms136"; + reg = <0x48>; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + avdd-supply = <®_touch_ldo_en>; + vdd-supply = <&ldo6>; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts index b535d24c6140..b550105585a1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts @@ -467,7 +467,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - eth@0 { + ethernet@0 { pinctrl-names = "default"; pinctrl-0 = <&ks8851_pins>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi index cadc7e02592b..80e89a2f8be1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi @@ -194,7 +194,7 @@ pinctrl-0 = <&mcspi1_pins>; status = "okay"; - eth@0 { + ethernet@0 { compatible = "ks8851"; pinctrl-names = "default"; pinctrl-0 = <&ks8851_irq_pins>; diff --git a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi index 3b505fe415ed..915870eb5c99 100644 --- a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi @@ -331,14 +331,14 @@ "refclk_60m_ext_p1", "refclk_60m_ext_p2"; - usbhsohci: ohci@800 { + usbhsohci: usb@800 { compatible = "ti,ohci-omap3"; reg = <0x800 0x400>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; remote-wakeup-connected; }; - usbhsehci: ehci@c00 { + usbhsehci: usb@c00 { compatible = "ti,ehci-omap"; reg = <0xc00 0x400>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; @@ -472,7 +472,7 @@ #phy-cells = <0>; }; - usb3_phy: usb3phy@4400 { + usb3_phy: usb3-phy@4400 { compatible = "ti,omap-usb3"; reg = <0x4400 0x80>, <0x4800 0x64>, @@ -2393,7 +2393,7 @@ #size-cells = <1>; ranges = <0x0 0x4000 0x1000>; - wdt2: wdt@0 { + wdt2: watchdog@0 { compatible = "ti,omap5-wdt", "ti,omap3-wdt"; reg = <0x0 0x80>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi new file mode 100644 index 000000000000..d599a2ca62a4 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Integrated Power Management Chip + * https://www.ti.com/lit/ds/symlink/twl6032.pdf + */ + +&twl { + compatible = "ti,twl6032"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + vio: regulator-vio { + compatible = "ti,twl6032-vio"; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,twl6032-ldo1"; + }; + + ldo2: regulator-ldo2 { + compatible = "ti,twl6032-ldo2"; + }; + + ldo3: regulator-ldo3 { + compatible = "ti,twl6032-ldo3"; + }; + + ldo4: regulator-ldo4 { + compatible = "ti,twl6032-ldo4"; + }; + + ldo5: regulator-ldo5 { + compatible = "ti,twl6032-ldo5"; + }; + + ldo6: regulator-ldo6 { + compatible = "ti,twl6032-ldo6"; + }; + + ldoln: regulator-ldoln { + compatible = "ti,twl6032-ldoln"; + }; + + ldousb: regulator-ldousb { + compatible = "ti,twl6032-ldousb"; + }; + + smps4: regulator-smps4 { + compatible = "ti,twl6032-smps4"; + }; + + gpadc: gpadc { + compatible = "ti,twl6032-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; + + twl_pwm: pwm { + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; +}; |