diff options
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc/fsl')
7 files changed, 245 insertions, 626 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt deleted file mode 100644 index c11ad5c6db21..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt +++ /dev/null @@ -1,204 +0,0 @@ -* Freescale DMA Controllers - -** Freescale Elo DMA Controller - This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx - series chips such as mpc8315, mpc8349, mpc8379 etc. - -Required properties: - -- compatible : must include "fsl,elo-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller -- cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : interrupt specifier for DMA IRQ - -- DMA channel nodes: - - compatible : must include "fsl,elo-dma-channel" - However, see note below. - - reg : DMA channel specific registers - - cell-index : DMA channel index starts at 0. - -Optional properties: - - interrupts : interrupt specifier for DMA channel IRQ - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - -Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - -** Freescale EloPlus DMA Controller - This is a 4-channel DMA controller with extended addresses and chaining, - mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as - mpc8540, mpc8641 p4080, bsc9131 etc. - -Required properties: - -- compatible : must include "fsl,eloplus-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - However, see note below. - - cell-index : DMA channel index starts at 0. - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - -** Freescale Elo3 DMA Controller - DMA controller which has same function as EloPlus except that Elo3 has 8 - channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx - series chips, such as t1040, t4240, b4860. - -Required properties: - -- compatible : must include "fsl,elo3-dma" -- reg : contains two entries for DMA General Status Registers, - i.e. DGSR0 which includes status for channel 1~4, and - DGSR1 for channel 5~8 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: -dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elo3-dma"; - reg = <0x100300 0x4>, - <0x100600 0x4>; - ranges = <0x0 0x100100 0x500>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - interrupts = <31 2 0 0>; - }; - dma-channel@300 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x300 0x80>; - interrupts = <76 2 0 0>; - }; - dma-channel@380 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x380 0x80>; - interrupts = <77 2 0 0>; - }; - dma-channel@400 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x400 0x80>; - interrupts = <78 2 0 0>; - }; - dma-channel@480 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x480 0x80>; - interrupts = <79 2 0 0>; - }; -}; - -Note on DMA channel compatible properties: The compatible property must say -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA -driver (fsldma). Any DMA channel used by fsldma cannot be used by another -DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA -channel that should be used for another driver should not use -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for -example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt -for more information. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fsl,mpc83xx.yaml b/Documentation/devicetree/bindings/powerpc/fsl/fsl,mpc83xx.yaml new file mode 100644 index 000000000000..9e37d155c582 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/fsl,mpc83xx.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/powerpc/fsl/fsl,mpc83xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale PowerQUICC II Pro (MPC83xx) platforms + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: MPC83xx Reference Design Boards + items: + - enum: + - fsl,mpc8308rdb + - fsl,mpc8315erdb + - fsl,mpc8360rdk + - fsl,mpc8377rdb + - fsl,mpc8377wlan + - fsl,mpc8378rdb + - fsl,mpc8379rdb + + - description: MPC8313E Reference Design Board + items: + - const: MPC8313ERDB + - const: MPC831xRDB + - const: MPC83xxRDB + + - description: MPC8323E Reference Design Board + items: + - const: MPC8323ERDB + - const: MPC832xRDB + - const: MPC83xxRDB + + - description: MPC8349E-mITX(-GP) Reference Design Platform + items: + - enum: + - MPC8349EMITX + - MPC8349EMITXGP + - const: MPC834xMITX + - const: MPC83xxMITX + + - description: Keymile KMETER1 board + const: keymile,KMETER1 + + - description: MPC8308 P1M board + const: denx,mpc8308_p1m + +patternProperties: + "^soc@.*$": + type: object + properties: + compatible: + oneOf: + - items: + - enum: + - fsl,mpc8315-immr + - fsl,mpc8308-immr + - const: simple-bus + - items: + - const: fsl,mpc8360-immr + - const: fsl,immr + - const: fsl,soc + - const: simple-bus + - const: simple-bus + +additionalProperties: true + +examples: + - | + / { + compatible = "fsl,mpc8315erdb"; + model = "MPC8315E-RDB"; + #address-cells = <1>; + #size-cells = <1>; + + soc@e0000000 { + compatible = "fsl,mpc8315-immr", "simple-bus"; + reg = <0xe0000000 0x00000200>; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 0xe0000000 0x00100000>; + bus-frequency = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt deleted file mode 100644 index 37f91fa57654..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ /dev/null @@ -1,17 +0,0 @@ -Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU) - -Required properties: -- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx". -- reg : should specify I2C address (0x0a). -- #gpio-cells : should be 2. -- gpio-controller : should be present. - -Example: - -mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8349emitx", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; -}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt deleted file mode 100644 index dc5744636a57..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt +++ /dev/null @@ -1,231 +0,0 @@ -===================================================================== -Freescale MPIC Interrupt Controller Node -Copyright (C) 2010,2011 Freescale Semiconductor Inc. -===================================================================== - -The Freescale MPIC interrupt controller is found on all PowerQUICC -and QorIQ processors and is compatible with the Open PIC. The -notable difference from Open PIC binding is the addition of 2 -additional cells in the interrupt specifier defining interrupt type -information. - -PROPERTIES - - - compatible - Usage: required - Value type: <string> - Definition: Shall include "fsl,mpic". Freescale MPIC - controllers compatible with this binding have Block - Revision Registers BRR1 and BRR2 at offset 0x0 and - 0x10 in the MPIC. - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical - offset and length of the device's registers within the - CCSR address space. - - - interrupt-controller - Usage: required - Value type: <empty> - Definition: Specifies that this node is an interrupt - controller - - - #interrupt-cells - Usage: required - Value type: <u32> - Definition: Shall be 2 or 4. A value of 2 means that interrupt - specifiers do not contain the interrupt-type or type-specific - information cells. - - - #address-cells - Usage: required - Value type: <u32> - Definition: Shall be 0. - - - pic-no-reset - Usage: optional - Value type: <empty> - Definition: The presence of this property specifies that the - MPIC must not be reset by the client program, and that - the boot program has initialized all interrupt source - configuration registers to a sane state-- masked or - directed at other cores. This ensures that the client - program will not receive interrupts for sources not belonging - to the client. The presence of this property also mandates - that any initialization related to interrupt sources shall - be limited to sources explicitly referenced in the device tree. - - - big-endian - Usage: optional - Value type: <empty> - If present the MPIC will be assumed to be big-endian. Some - device-trees omit this property on MPIC nodes even when the MPIC is - in fact big-endian, so certain boards override this property. - - - single-cpu-affinity - Usage: optional - Value type: <empty> - If present the MPIC will be assumed to only be able to route - non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC). - - - last-interrupt-source - Usage: optional - Value type: <u32> - Some MPICs do not correctly report the number of hardware sources - in the global feature registers. If specified, this field will - override the value read from MPIC_GREG_FEATURE_LAST_SRC. - -INTERRUPT SPECIFIER DEFINITION - - Interrupt specifiers consists of 4 cells encoded as - follows: - - <1st-cell> interrupt-number - - Identifies the interrupt source. The meaning - depends on the type of interrupt. - - Note: If the interrupt-type cell is undefined - (i.e. #interrupt-cells = 2), this cell - should be interpreted the same as for - interrupt-type 0-- i.e. an external or - normal SoC device interrupt. - - <2nd-cell> level-sense information, encoded as follows: - 0 = low-to-high edge triggered - 1 = active low level-sensitive - 2 = active high level-sensitive - 3 = high-to-low edge triggered - - <3rd-cell> interrupt-type - - The following types are supported: - - 0 = external or normal SoC device interrupt - - The interrupt-number cell contains - the SoC device interrupt number. The - type-specific cell is undefined. The - interrupt-number is derived from the - MPIC a block of registers referred to as - the "Interrupt Source Configuration Registers". - Each source has 32-bytes of registers - (vector/priority and destination) in this - region. So interrupt 0 is at offset 0x0, - interrupt 1 is at offset 0x20, and so on. - - 1 = error interrupt - - The interrupt-number cell contains - the SoC device interrupt number for - the error interrupt. The type-specific - cell identifies the specific error - interrupt number. - - 2 = MPIC inter-processor interrupt (IPI) - - The interrupt-number cell identifies - the MPIC IPI number. The type-specific - cell is undefined. - - 3 = MPIC timer interrupt - - The interrupt-number cell identifies - the MPIC timer number. The type-specific - cell is undefined. - - <4th-cell> type-specific information - - The type-specific cell is encoded as follows: - - - For interrupt-type 1 (error interrupt), - the type-specific cell contains the - bit number of the error interrupt in the - Error Interrupt Summary Register. - -EXAMPLE 1 - /* - * mpic interrupt controller with 4 cells per specifier - */ - mpic: pic@40000 { - compatible = "fsl,mpic"; - interrupt-controller; - #interrupt-cells = <4>; - #address-cells = <0>; - reg = <0x40000 0x40000>; - }; - -EXAMPLE 2 - /* - * The MPC8544 I2C controller node has an internal - * interrupt number of 27. As per the reference manual - * this corresponds to interrupt source configuration - * registers at 0x5_0560. - * - * The interrupt source configuration registers begin - * at 0x5_0000. - * - * To compute the interrupt specifier interrupt number - * - * 0x560 >> 5 = 43 - * - * The interrupt source configuration registers begin - * at 0x5_0000, and so the i2c vector/priority registers - * are at 0x5_0560. - */ - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - -EXAMPLE 3 - /* - * Definition of a node defining the 4 - * MPIC IPI interrupts. Note the interrupt - * type of 2. - */ - ipi@410a0 { - compatible = "fsl,mpic-ipi"; - reg = <0x40040 0x10>; - interrupts = <0 0 2 0 - 1 0 2 0 - 2 0 2 0 - 3 0 2 0>; - }; - -EXAMPLE 4 - /* - * Definition of a node defining the MPIC - * global timers. Note the interrupt - * type of 3. - */ - timer0: timer@41100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x41100 0x100 0x41300 4>; - interrupts = <0 0 3 0 - 1 0 3 0 - 2 0 3 0 - 3 0 3 0>; - }; - -EXAMPLE 5 - /* - * Definition of an error interrupt (interrupt type 1). - * SoC interrupt number is 16 and the specific error - * interrupt bit in the error interrupt summary register - * is 23. - */ - memory-controller@8000 { - compatible = "fsl,p4080-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt deleted file mode 100644 index f8d2b7fe06d6..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Freescale MSI interrupt controller - -Required properties: -- compatible : compatible list, may contain one or two entries - The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or - "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic - version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is - provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3" - should be used. The first entry is optional; the second entry is - required. - -- reg : It may contain one or two regions. The first region should contain - the address and the length of the shared message interrupt register set. - The second region should contain the address of aliased MSIIR or MSIIR1 - register for platforms that have such an alias, if using MSIIR1, the second - region must be added because different MSI group has different MSIIR1 offset. - -- interrupts : each one of the interrupts here is one entry per 32 MSIs, - and routed to the host interrupt controller. the interrupts should - be set as edge sensitive. If msi-available-ranges is present, only - the interrupts that correspond to available ranges shall be present. - -Optional properties: -- msi-available-ranges: use <start count> style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the MSI interrupts can be used. - Each available range must begin and end on a multiple of 32 (i.e. - no splitting an individual MSI register or the associated PIC interrupt). - MPIC v4.3 does not support this property because the 32 interrupts of an - individual register are not continuous when using MSIIR1. - -- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register - is used for MSI messaging. The address of MSIIR in PCI address space is - the MSI message address. - - This property may be used in virtualized environments where the hypervisor - has created an alternate mapping for the MSIR block. See below for an - explanation. - - -Example: - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - msi@41600 { - compatible = "fsl,mpic-msi-v4.3"; - reg = <0x41600 0x200 0x44148 4>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0 - 0x100 0 0 0 - 0x101 0 0 0 - 0x102 0 0 0 - 0x103 0 0 0 - 0x104 0 0 0 - 0x105 0 0 0 - 0x106 0 0 0 - 0x107 0 0 0>; - }; - -The Freescale hypervisor and msi-address-64 -------------------------------------------- -Normally, PCI devices have access to all of CCSR via an ATMU mapping. The -Freescale MSI driver calculates the address of MSIIR (in the MSI register -block) and sets that address as the MSI message address. - -In a virtualized environment, the hypervisor may need to create an IOMMU -mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement -because of hardware limitations of the Peripheral Access Management Unit -(PAMU), which is currently the only IOMMU that the hypervisor supports. -The ATMU is programmed with the guest physical address, and the PAMU -intercepts transactions and reroutes them to the true physical address. - -In the PAMU, each PCI controller is given only one primary window. The -PAMU restricts DMA operations so that they can only occur within a window. -Because PCI devices must be able to DMA to memory, the primary window must -be used to cover all of the guest's memory space. - -PAMU primary windows can be divided into 256 subwindows, and each -subwindow can have its own address mapping ("guest physical" to "true -physical"). However, each subwindow has to have the same alignment, which -means they cannot be located at just any address. Because of these -restrictions, it is usually impossible to create a 4KB subwindow that -covers MSIIR where it's normally located. - -Therefore, the hypervisor has to create a subwindow inside the same -primary window used for memory, but mapped to the MSIR block (where MSIIR -lives). The first subwindow after the end of guest memory is used for -this. The address specified in the msi-address-64 property is the PCI -address of MSIIR. The hypervisor configures the PAMU to map that address to -the true physical address of MSIIR. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt deleted file mode 100644 index 07256b7ffcaa..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Power Management Controller - -Properties: -- compatible: "fsl,<chip>-pmc". - - "fsl,mpc8349-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8313-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8548-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8536-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is - compatible; all statements below that apply to "fsl,mpc8548-pmc" also - apply to "fsl,mpc8641d-pmc". - - Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these - bit assignments are indicated via the sleep specifier in each device's - sleep property. - -- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource - is the PMC block, and the second resource is the Clock Configuration - block. - - For devices compatible with "fsl,mpc8548-pmc", the first resource - is a 32-byte block beginning with DEVDISR. - -- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first - resource is the PMC block interrupt. - -- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices, - this is a phandle to an "fsl,gtm" node on which timer 4 can be used as - a wakeup source from deep sleep. - -Sleep specifiers: - - fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit - that is set in the cell, the corresponding bit in SCCR will be saved - and cleared on suspend, and restored on resume. This sleep controller - supports disabling and resuming devices at any time. - - fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of - which will be ORed into PMCDR upon suspend, and cleared from PMCDR - upon resume. The first two cells are as described for fsl,mpc8578-pmc. - This sleep controller only supports disabling devices during system - sleep, or permanently. - - fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the - first of which will be ORed into DEVDISR (and the second into - DEVDISR2, if present -- this cell should be zero or absent if the - hardware does not have DEVDISR2) upon a request for permanent device - disabling. This sleep controller does not support configuring devices - to disable during system sleep (unless supported by another compatible - match), or dynamically. - -Example: - - power@b00 { - compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 8>; - }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml b/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml new file mode 100644 index 000000000000..276ece7f01db --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/powerpc/fsl/pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power Management Controller + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +description: | + The Power Management Controller in several MPC8xxx SoCs helps save power by + controlling chip-wide low-power states as well as peripheral clock gating. + + Sleep of peripheral devices is configured by the `sleep` property, for + example `sleep = <&pmc 0x00000030>`. Any cells after the &pmc phandle are + called a sleep specifier. + + For "fsl,mpc8349-pmc", sleep specifiers consist of one cell. For each bit that + is set in the cell, the corresponding bit in SCCR will be saved and cleared + on suspend, and restored on resume. This sleep controller supports disabling + and resuming devices at any time. + + For "fsl,mpc8536-pmc", sleep specifiers consist of three cells, the third of + which will be ORed into PMCDR upon suspend, and cleared from PMCDR upon + resume. The first two cells are as described for fsl,mpc8548-pmc. This + sleep controller only supports disabling devices during system sleep, or + permanently. + + For "fsl,mpc8548-pmc" or "fsl,mpc8641d-pmc", Sleep specifiers consist of one + or two cells, the first of which will be ORed into DEVDISR (and the second + into DEVDISR2, if present -- this cell should be zero or absent if the + hardware does not have DEVDISR2) upon a request for permanent device + disabling. This sleep controller does not support configuring devices to + disable during system sleep (unless supported by another compatible match), + or dynamically. + +properties: + compatible: + oneOf: + - items: + - const: fsl,mpc8315-pmc + - const: fsl,mpc8313-pmc + - const: fsl,mpc8349-pmc + + - items: + - enum: + - fsl,mpc8313-pmc + - fsl,mpc8323-pmc + - fsl,mpc8360-pmc + - fsl,mpc8377-pmc + - fsl,mpc8378-pmc + - fsl,mpc8379-pmc + - const: fsl,mpc8349-pmc + + - items: + - const: fsl,p1022-pmc + - const: fsl,mpc8536-pmc + - const: fsl,mpc8548-pmc + + - items: + - enum: + - fsl,mpc8536-pmc + - fsl,mpc8568-pmc + - fsl,mpc8569-pmc + - const: fsl,mpc8548-pmc + + - enum: + - fsl,mpc8548-pmc + - fsl,mpc8641d-pmc + + description: | + "fsl,mpc8349-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8313-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8548-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8536-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is + compatible; all statements below that apply to "fsl,mpc8548-pmc" also + apply to "fsl,mpc8641d-pmc". + + Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these + bit assignments are indicated via the sleep specifier in each device's + sleep property. + + reg: + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + fsl,mpc8313-wakeup-timer: + $ref: /schemas/types.yaml#/definitions/phandle + description: + For "fsl,mpc8313-pmc"-compatible devices, this is a phandle to an + "fsl,gtm" node on which timer 4 can be used as a wakeup source from deep + sleep. + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,mpc8349-pmc + then: + properties: + reg: + items: + - description: PMC block + - description: Clock Configuration block + + - if: + properties: + compatible: + contains: + enum: + - fsl,mpc8548-pmc + - fsl,mpc8641d-pmc + then: + properties: + reg: + items: + - description: 32-byte block beginning with DEVDISR + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100>, <0xa00 0x100>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; + }; + + - | + power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + +... |