diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless')
14 files changed, 642 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index a3607d55ef36..81fd3e37452a 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -16,7 +16,7 @@ description: binding. allOf: - - $ref: ieee80211.yaml# + - $ref: /schemas/net/wireless/wireless-controller.yaml# properties: compatible: @@ -42,6 +42,7 @@ properties: - brcm,bcm4356-fmac - brcm,bcm4359-fmac - brcm,bcm4366-fmac + - brcm,bcm43752-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac - infineon,cyw43439-fmac @@ -53,6 +54,7 @@ properties: - pci14e4,4488 # BCM4377 - pci14e4,4425 # BCM4378 - pci14e4,4433 # BCM4387 + - pci14e4,4434 # BCM4388 - pci14e4,449d # BCM43752 reg: diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index eabceb849537..ae6b97cdc44b 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -151,6 +151,12 @@ properties: - ETSI - JP + country: + $ref: /schemas/types.yaml#/definitions/string + pattern: '^[A-Z]{2}$' + description: + ISO 3166-1 alpha-2 country code for power limits + patternProperties: "^txpower-[256]g$": type: object @@ -210,6 +216,66 @@ properties: minItems: 13 maxItems: 13 + paths-cck: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm-bf: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values for beamforming + (1 - 4 antennas, single spacial stream) + + paths-ru: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff values for 802.11ax rates for + 1T1ss (aka 1 transmitting antenna with 1 spacial stream), + 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, 4T3ss + and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + + paths-ru-bf: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff (beamforming) values for 802.11ax + rates for 1T1ss (aka 1 transmitting antenna with 1 spacial + stream), 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, + 4T3ss and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + txs-delta: $ref: /schemas/types.yaml#/definitions/uint32-array description: diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml index 0e5412cff2bc..d16ca8e0a25d 100644 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml @@ -12,7 +12,7 @@ maintainers: description: | This node provides properties for configuring the ath9k wireless device. The node is expected to be specified as a child node of the PCI controller - to which the wireless chip is connected. + or AHB bus to which the wireless chip is connected. allOf: - $ref: ieee80211.yaml# @@ -35,6 +35,12 @@ properties: - pci168c,0034 # AR9462 - pci168c,0036 # AR9565 - pci168c,0037 # AR1111 and AR9485 + - qca,ar9130-wifi + - qca,ar9330-wifi + - qca,ar9340-wifi + - qca,qca9530-wifi + - qca,qca9550-wifi + - qca,qca9560-wifi reg: maxItems: 1 @@ -88,3 +94,13 @@ examples: nvmem-cell-names = "mac-address", "calibration"; }; }; + - | + ahb { + #address-cells = <1>; + #size-cells = <1>; + wifi@180c0000 { + compatible = "qca,ar9130-wifi"; + reg = <0x180c0000 0x230000>; + interrupts = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index f2440d39b7eb..d4f4d72ee0d3 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -158,7 +158,13 @@ properties: description: State bits used by the AP to signal the WLAN Q6. items: - description: Signal bits used to enable/disable low power mode - on WCN in the case of WoW (Wake on Wireless). + on WCN in the case of WoW (Wake on Wireless). + items: + - description: Phandle to the Shared Memory Point 2 Point device + handling the communication with a remote processor + - description: Single bit index to toggle in the value sent to + the remote processor + maximum: 32 qcom,smem-state-names: description: The names of the state bits used for SMP2P output. @@ -171,6 +177,12 @@ properties: Quirk specifying that the firmware expects the 8bit version of the host capability QMI request + qcom,snoc-host-cap-skip-quirk: + type: boolean + description: + Quirk specifying that the firmware wants to skip the host + capability QMI request + qcom,xo-cal-data: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -292,6 +304,11 @@ allOf: required: - interrupts + - not: + required: + - qcom,snoc-host-cap-8bit-quirk + - qcom,snoc-host-cap-skip-quirk + examples: # SNoC - | diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml index 653b319fee88..0162e365798b 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -35,6 +35,13 @@ properties: string to uniquely identify variant of the calibration data for designs with colliding bus and device ids + firmware-name: + maxItems: 1 + deprecated: true + description: + If present, a board or platform specific string used to lookup + usecase-specific firmware files for the device. + vddrfacmn-supply: description: VDD_RFA_CMN supply regulator handle diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index c089677702cf..d4aa56e2f823 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -80,7 +80,13 @@ properties: description: State bits used by the AP to signal the WLAN Q6. items: - description: Signal bits used to enable/disable low power mode - on WCN6750 in the case of WoW (Wake on Wireless). + on WCN6750 in the case of WoW (Wake on Wireless). + items: + - description: Phandle to the Shared Memory Point 2 Point device + handling the communication with a remote processor + - description: Single bit index to toggle in the value sent to + the remote processor + maximum: 32 qcom,smem-state-names: description: The names of the state bits used for SMP2P output. @@ -214,15 +220,6 @@ allOf: - const: wbm2host-tx-completions-ring2 - const: wbm2host-tx-completions-ring1 - const: tcl2host-status-ring - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq8074-wifi - - qcom,ipq6018-wifi - then: required: - interrupt-names diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml index 9e557cb838c7..dc68dd59988f 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml @@ -21,6 +21,12 @@ properties: reg: maxItems: 1 + firmware-name: + maxItems: 1 + description: + If present, a board or platform specific string used to lookup + usecase-specific firmware files for the device. + vddaon-supply: description: VDD_AON supply regulator handle diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml new file mode 100644 index 000000000000..18cd91e2728c --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml @@ -0,0 +1,334 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ipq5332-wifi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath12k wireless devices (AHB) + +maintainers: + - Jeff Johnson <jjohnson@kernel.org> + +description: + Qualcomm Technologies IEEE 802.11be AHB devices. + +properties: + compatible: + enum: + - qcom,ipq5332-wifi + - qcom,ipq5424-wifi + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock used for copy engine + + clock-names: + items: + - const: xo + + interrupts: + items: + - description: Fatal interrupt + - description: Ready interrupt + - description: Spawn acknowledge interrupt + - description: Stop acknowledge interrupt + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring4 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring host2tx-monitor-ring1 + - description: interrupt event for ring txmon2host-monitor-destination-mac3 + - description: interrupt event for ring txmon2host-monitor-destination-mac2 + - description: interrupt event for ring txmon2host-monitor-destination-mac1 + - description: interrupt event for umac-reset + + interrupt-names: + items: + - const: fatal + - const: ready + - const: spawn + - const: stop-ack + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring4 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: host2tx-monitor-ring1 + - const: txmon2host-monitor-destination-mac3 + - const: txmon2host-monitor-destination-mac2 + - const: txmon2host-monitor-destination-mac1 + - const: umac-reset + + memory-region: + description: + Memory regions used by the ath12k firmware. + items: + - description: Q6 memory region + - description: m3 dump memory region + - description: Q6 caldata memory region + - description: Multi Link Operation (MLO) Global memory region + + memory-region-names: + items: + - const: q6-region + - const: m3-dump + - const: q6-caldb + - const: mlo-global-mem + + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + String to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + + qcom,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the Qualcomm Hexagon DSP(q6 remote processor), which is utilized + for offloading WiFi processing tasks, this q6 remote processor operates in + conjunction with WiFi. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the remote processor + items: + - description: Shutdown WCSS pd + items: + - description: Phandle to the Shared Memory Point 2 Point device + handling the communication with a remote processor + - description: Single bit index to toggle in the value sent to + the remote processor + maximum: 32 + - description: Stop WCSS pd + items: + - description: Phandle to the Shared Memory Point 2 Point device + handling the communication with a remote processor + - description: Single bit index to toggle in the value sent to + the remote processor + maximum: 32 + - description: Spawn WCSS pd + items: + - description: Phandle to the Shared Memory Point 2 Point device + handling the communication with a remote processor + - description: Single bit index to toggle in the value sent to + the remote processor + maximum: 32 + + qcom,smem-state-names: + description: + Names of the states used by the AP to signal the remote processor + items: + - const: shutdown + - const: stop + - const: spawn + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - memory-region + - memory-region-names + - qcom,rproc + - qcom,smem-states + - qcom,smem-state-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,ipq5332-gcc.h> + + wifi0: wifi@c000000 { + compatible = "qcom,ipq5332-wifi"; + reg = <0x0c000000 0x1000000>; + clocks = <&gcc GCC_XO_CLK>; + clock-names = "xo"; + interrupts-extended = <&wcss_smp2p_in 8 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 9 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 12 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 11 IRQ_TYPE_NONE>, + <&intc GIC_SPI 559 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 560 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 561 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 422 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 423 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 424 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 425 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 426 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 427 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 428 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 429 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 430 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 431 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 491 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 495 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 493 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 544 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 457 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 497 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 454 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 453 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 452 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 451 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 484 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 549 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 507 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 500 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 499 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 498 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 450 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 449 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 447 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 543 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 482 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 419 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "fatal", + "ready", + "spawn", + "stop-ack", + "misc-pulse1", + "misc-latch", + "sw-exception", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring4", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "host2tx-monitor-ring1", + "txmon2host-monitor-destination-mac3", + "txmon2host-monitor-destination-mac2", + "txmon2host-monitor-destination-mac1", + "umac-reset"; + + memory-region = <&q6_region>, <&m3_dump>, <&q6_caldb>, <&mlo_mem>; + memory-region-names = "q6-region", "m3-dump", "q6-caldb", "mlo-global-mem"; + qcom,calibration-variant = "RDP441_1"; + qcom,rproc = <&q6v5_wcss>; + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml b/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml new file mode 100644 index 000000000000..04dc5bb2edcc --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/ralink,rt2880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT2880 wireless device + +maintainers: + - Stanislaw Gruszka <stf_xl@wp.pl> + +description: | + This node provides properties for configuring RT2880 SOC wifi devices. + The node is expected to be specified as a root node of the device. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - ralink,rt2880-wifi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + wifi@110180000 { + compatible = "ralink,rt2880-wifi"; + reg = <0x10180000 0x40000>; + clocks = <&sysc 16>; + interrupt-parent = <&cpuintc>; + interrupts = <6>; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml b/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml new file mode 100644 index 000000000000..2769731e0708 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/realtek,rtl8188e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL8188E USB WiFi + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +description: + Realtek RTL8188E is a family of USB-connected 2.4 GHz WiFi modules. + +allOf: + - $ref: /schemas/usb/usb-device.yaml# + +properties: + compatible: + const: usbbda,179 # RTL8188ETV + + reg: true + + vdd-supply: + description: + Regulator for the 3V3 supply. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + #address-cells = <1>; + #size-cells = <0>; + + wifi: wifi@1 { + compatible = "usbbda,179"; + reg = <1>; + vdd-supply = <&vcc3v3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 84e5659e50ef..6c0888ae4c4e 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -71,15 +71,12 @@ properties: "Platform Data Set" in Silabs jargon). Default depends of "compatible" string. For "silabs,wf200", the default is 'wf200.pds'. - local-mac-address: true - - mac-address: true - required: - compatible - reg allOf: + - $ref: /schemas/net/wireless/wireless-controller.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml new file mode 100644 index 000000000000..a32265c07350 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/st,stlc4560.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST/Intersil/Conexant stlc45xx/p54spi/cx3110x SPI wireless device + +maintainers: + - Christian Lamparter <chunkeey@gmail.com> + +description: + The SPI variant of the Intersil Prism54 wireless device was sold + under a variety of names, including Conexant CX3110x and + ST Microelectronics STLC5460. + +allOf: + - $ref: ieee80211.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: st,stlc4560 + - items: + - enum: + - cnxt,3110x + - isil,p54spi + - st,stlc4550 + - const: st,stlc4560 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + wifi@0 { + compatible = "st,stlc4560"; + reg = <0>; + spi-max-frequency = <48000000>; + interrupts-extended = <&gpio 23>; + powerdown-gpios = <&gpio 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 75c9489f319b..9de5fdefcbcc 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -50,7 +50,6 @@ properties: Points to the node of the regulator that powers/enable the wl12xx/wl18xx chip. This is required when connected via SPI. - ref-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. diff --git a/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml b/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml new file mode 100644 index 000000000000..7379f6c1aa05 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/wireless-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wireless Controller Common Properties + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +properties: + $nodename: + pattern: "^wifi(@.*)?$" + +allOf: + - $ref: ieee80211.yaml# + - $ref: /schemas/net/network-class.yaml# + +additionalProperties: true + +... + |