diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/exynos4-fimc-is.txt')
-rw-r--r-- | Documentation/devicetree/bindings/media/exynos4-fimc-is.txt | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt deleted file mode 100644 index 32ced99d4244..000000000000 --- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt +++ /dev/null @@ -1,50 +0,0 @@ -Exynos4x12 SoC series Imaging Subsystem (FIMC-IS) - -The FIMC-IS is a subsystem for processing image signal from an image sensor. -The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 -processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C -and SPI bus controllers, PWM and ADC. - -fimc-is node ------------- - -Required properties: -- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1; -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1" - "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp", - "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1", - "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200", - "aclk400mcuisp", "div_aclk400mcuisp" entries, - matching entries in the clocks property. -pmu subnode ------------ - -Required properties: - - reg : must contain PMU physical base address and size of the register set. - -The following are the FIMC-IS peripheral device nodes and can be specified -either standalone or as the fimc-is node child nodes. - -i2c-isp (ISP I2C bus controller) nodes ------------------------------------------- - -Required properties: - -- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- clocks : must contain gate clock specifier for this controller; -- clock-names : must contain "i2c_isp" entry. - -For the above nodes it is required to specify a pinctrl state named "default", -according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. - -Device tree nodes of the image sensors' controlled directly by the FIMC-IS -firmware must be child nodes of their corresponding ISP I2C bus controller node. -The data link of these image sensors must be specified using the common video -interfaces bindings, defined in video-interfaces.txt. |