diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 55 |
1 files changed, 41 insertions, 14 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index fb8752b42ec8..3435a062a208 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -416,10 +416,6 @@ Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. - For X86-32, this can also be used to specify an APIC - driver name. - Format: apic=driver_name - Examples: apic=bigsmp apic_extnmi= [APIC,X86,EARLY] External NMI delivery setting Format: { bsp (default) | all | none } @@ -1411,14 +1407,21 @@ earlyprintk=serial[,0x...[,baudrate]] earlyprintk=ttySn[,baudrate] earlyprintk=dbgp[debugController#] - earlyprintk=pciserial[,force],bus:device.function[,baudrate] + earlyprintk=pciserial[,force],bus:device.function[,{nocfg|baudrate}] earlyprintk=xdbc[xhciController#] earlyprintk=bios + earlyprintk=mmio,membase[,{nocfg|baudrate}] earlyprintk is useful when the kernel crashes before the normal console is initialized. It is not enabled by default because it has some cosmetic problems. + Only 32-bit memory addresses are supported for "mmio" + and "pciserial" devices. + + Use "nocfg" to skip UART configuration, assume + BIOS/firmware has configured UART correctly. + Append ",keep" to not disable it when the real console takes over. @@ -1785,7 +1788,9 @@ allocation boundaries as a proactive defense against bounds-checking flaws in the kernel's copy_to_user()/copy_from_user() interface. - on Perform hardened usercopy checks (default). + The default is determined by + CONFIG_HARDENED_USERCOPY_DEFAULT_ON. + on Perform hardened usercopy checks. off Disable hardened usercopy checks. hardlockup_all_cpu_backtrace= @@ -2316,6 +2321,9 @@ per_cpu_perf_limits Allow per-logical-CPU P-State performance control limits using cpufreq sysfs interface + no_cas + Do not enable capacity-aware scheduling (CAS) on + hybrid systems intremap= [X86-64,Intel-IOMMU,EARLY] on enable Interrupt Remapping (default) @@ -3116,6 +3124,8 @@ * max_sec_lba48: Set or clear transfer size limit to 65535 sectors. + * external: Mark port as external (hotplug-capable). + * [no]lpm: Enable or disable link power management. * [no]setxfer: Indicate if transfer speed mode setting @@ -5017,6 +5027,14 @@ Format: <bool> default: 0 (auto_verbose is enabled) + printk.debug_non_panic_cpus= + Allows storing messages from non-panic CPUs into + the printk log buffer during panic(). They are + flushed to consoles by the panic-CPU on + a best-effort basis. + Format: <bool> (1/Y/y=enable, 0/N/n=disable) + Default: disabled + printk.devkmsg={on,off,ratelimit} Control writing to /dev/kmsg. on - unlimited logging to /dev/kmsg from userspace @@ -5758,6 +5776,11 @@ rcutorture.test_boost_duration= [KNL] Duration (s) of each individual boost test. + rcutorture.test_boost_holdoff= [KNL] + Holdoff time (s) from start of test to the start + of RCU priority-boost testing. Defaults to zero, + that is, no holdoff. + rcutorture.test_boost_interval= [KNL] Interval (s) between each boost test. @@ -6082,7 +6105,7 @@ is assumed to be I/O ports; otherwise it is memory. reserve_mem= [RAM] - Format: nn[KNG]:<align>:<label> + Format: nn[KMG]:<align>:<label> Reserve physical memory and label it with a name that other subsystems can use to access it. This is typically used for systems that do not wipe the RAM, and this command @@ -6582,6 +6605,8 @@ Selecting 'on' will also enable the mitigation against user space to user space task attacks. + Selecting specific mitigation does not force enable + user mitigations. Selecting 'off' will disable both the kernel and the user space protections. @@ -7279,6 +7304,15 @@ See also "Event triggers" in Documentation/trace/events.rst + traceoff_after_boot + [FTRACE] Sometimes tracing is used to debug issues + during the boot process. Since the trace buffer has a + limited amount of storage, it may be prudent to + disable tracing after the boot is finished, otherwise + the critical information may be overwritten. With this + option, the main tracing buffer will be turned off at + the end of the boot process. + traceoff_on_warning [FTRACE] enable this option to disable tracing when a warning is hit. This turns off "tracing_on". Tracing can @@ -7672,13 +7706,6 @@ 16 - SIGBUS faults Example: user_debug=31 - userpte= - [X86,EARLY] Flags controlling user PTE allocations. - - nohigh = do not allocate PTE pages in - HIGHMEM regardless of setting - of CONFIG_HIGHPTE. - vdso= [X86,SH,SPARC] On X86_32, this is an alias for vdso32=. Otherwise: |