diff options
37 files changed, 939 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml new file mode 100644 index 000000000000..f9c069f8534b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,adp5585.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADP5585 Keypad Decoder and I/O Expansion + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The ADP5585 is a 10/11 input/output port expander with a built in keypad + matrix decoder, programmable logic, reset generator, and PWM generator. + +properties: + compatible: + items: + - enum: + - adi,adp5585-00 # Default + - adi,adp5585-01 # 11 GPIOs + - adi,adp5585-02 # No pull-up resistors by default on special pins + - adi,adp5585-03 # Alternate I2C address + - adi,adp5585-04 # Pull-down resistors on all pins by default + - const: adi,adp5585 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-reserved-ranges: true + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - "#pwm-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adp5585-01 + then: + properties: + gpio-reserved-ranges: false + else: + properties: + gpio-reserved-ranges: + maxItems: 1 + items: + items: + - const: 5 + - const: 1 + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + io-expander@34 { + compatible = "adi,adp5585-00", "adi,adp5585"; + reg = <0x34>; + + vdd-supply = <®_3v3>; + + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <5 1>; + + #pwm-cells = <3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 66e400f2a3a4..1b192e197b11 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -46,10 +46,11 @@ properties: - description: Module Clock - description: Bus Clock - # Even though it only applies to subschemas under the conditionals, - # not listing them here will trigger a warning because of the - # additionalsProperties set to false. - clock-names: true + clock-names: + minItems: 1 + items: + - const: mod + - const: bus resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml index 1d71d4f8f328..e021cf59421a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml @@ -39,6 +39,10 @@ properties: - amlogic,meson-s4-pwm - items: - enum: + - amlogic,meson-a1-pwm + - const: amlogic,meson-s4-pwm + - items: + - enum: - amlogic,meson8b-pwm-v2 - amlogic,meson-gxbb-pwm-v2 - amlogic,meson-axg-pwm-v2 @@ -56,6 +60,9 @@ properties: minItems: 1 maxItems: 2 + power-domains: + maxItems: 1 + "#pwm-cells": const: 3 @@ -136,6 +143,16 @@ allOf: required: - clocks + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-a1-pwm + then: + required: + - power-domains + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml index 6b6a302a175c..2fe1992e2908 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -37,6 +37,7 @@ properties: - renesas,pwm-r8a77995 # R-Car D3 - renesas,pwm-r8a779a0 # R-Car V3U - renesas,pwm-r8a779g0 # R-Car V4H + - renesas,pwm-r8a779h0 # R-Car V4M - const: renesas,pwm-rcar reg: diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml index a3e52b22dd18..a4dfa09344dd 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -41,6 +41,7 @@ properties: - renesas,tpu-r8a77980 # R-Car V3H - renesas,tpu-r8a779a0 # R-Car V3U - renesas,tpu-r8a779g0 # R-Car V4H + - renesas,tpu-r8a779h0 # R-Car V4M - const: renesas,tpu reg: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 516d50b01090..8a9a00705b23 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -38,10 +38,6 @@ properties: - ad,adm9240 # AD5110 - Nonvolatile Digital Potentiometer - adi,ad5110 - # Analog Devices ADP5585 Keypad Decoder and I/O Expansion - - adi,adp5585 - # Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5 - - adi,adp5585-02 # Analog Devices ADP5589 Keypad Decoder and I/O Expansion - adi,adp5589 # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher diff --git a/MAINTAINERS b/MAINTAINERS index 1089ea6f2154..38058758c576 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -538,6 +538,17 @@ F: drivers/leds/leds-adp5520.c F: drivers/mfd/adp5520.c F: drivers/video/backlight/adp5520_bl.c +ADP5585 GPIO EXPANDER, PWM AND KEYPAD CONTROLLER DRIVER +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +L: linux-gpio@vger.kernel.org +L: linux-pwm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/*/adi,adp5585*.yaml +F: drivers/gpio/gpio-adp5585.c +F: drivers/mfd/adp5585.c +F: drivers/pwm/pwm-adp5585.c +F: include/linux/mfd/adp5585.h + ADP5588 QWERTY KEYPAD AND IO EXPANDER DRIVER (ADP5588/ADP5587) M: Michael Hennerich <michael.hennerich@analog.com> S: Supported diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 58f43bcced7c..d93cd4f722b4 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1233,6 +1233,13 @@ config GPIO_ADP5520 This option enables support for on-chip GPIO found on Analog Devices ADP5520 PMICs. +config GPIO_ADP5585 + tristate "GPIO Support for ADP5585" + depends on MFD_ADP5585 + help + This option enables support for the GPIO function found in the Analog + Devices ADP5585. + config GPIO_ALTERA_A10SR tristate "Altera Arria10 System Resource GPIO" depends on MFD_ALTERA_A10SR diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 64dd6d9d730d..1429e8c0229b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o +obj-$(CONFIG_GPIO_ADP5585) += gpio-adp5585.o obj-$(CONFIG_GPIO_AGGREGATOR) += gpio-aggregator.o obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o diff --git a/drivers/gpio/gpio-adp5585.c b/drivers/gpio/gpio-adp5585.c new file mode 100644 index 000000000000..000d31f09671 --- /dev/null +++ b/drivers/gpio/gpio-adp5585.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices ADP5585 GPIO driver + * + * Copyright 2022 NXP + * Copyright 2024 Ideas on Board Oy + */ + +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/adp5585.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#define ADP5585_GPIO_MAX 11 + +struct adp5585_gpio_dev { + struct gpio_chip gpio_chip; + struct regmap *regmap; +}; + +static int adp5585_gpio_get_direction(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + unsigned int val; + + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); + + return val & bit ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; +} + +static int adp5585_gpio_direction_input(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_clear_bits(adp5585_gpio->regmap, + ADP5585_GPIO_DIRECTION_A + bank, bit); +} + +static int adp5585_gpio_direction_output(struct gpio_chip *chip, unsigned int off, int val) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + int ret; + + ret = regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPO_DATA_OUT_A + bank, bit, + val ? bit : 0); + if (ret) + return ret; + + return regmap_set_bits(adp5585_gpio->regmap, + ADP5585_GPIO_DIRECTION_A + bank, bit); +} + +static int adp5585_gpio_get_value(struct gpio_chip *chip, unsigned int off) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + unsigned int reg; + unsigned int val; + + /* + * The input status register doesn't reflect the pin state when the + * GPIO is configured as an output. Check the direction, and read the + * input status from GPI_STATUS or output value from GPO_DATA_OUT + * accordingly. + * + * We don't need any locking, as concurrent access to the same GPIO + * isn't allowed by the GPIO API, so there's no risk of the + * .direction_input(), .direction_output() or .set() operations racing + * with this. + */ + regmap_read(adp5585_gpio->regmap, ADP5585_GPIO_DIRECTION_A + bank, &val); + reg = val & bit ? ADP5585_GPO_DATA_OUT_A : ADP5585_GPI_STATUS_A; + regmap_read(adp5585_gpio->regmap, reg + bank, &val); + + return !!(val & bit); +} + +static void adp5585_gpio_set_value(struct gpio_chip *chip, unsigned int off, int val) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + regmap_update_bits(adp5585_gpio->regmap, ADP5585_GPO_DATA_OUT_A + bank, + bit, val ? bit : 0); +} + +static int adp5585_gpio_set_bias(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, unsigned int bias) +{ + unsigned int bit, reg, mask, val; + + /* + * The bias configuration fields are 2 bits wide and laid down in + * consecutive registers ADP5585_RPULL_CONFIG_*, with a hole of 4 bits + * after R5. + */ + bit = off * 2 + (off > 5 ? 4 : 0); + reg = ADP5585_RPULL_CONFIG_A + bit / 8; + mask = ADP5585_Rx_PULL_CFG_MASK << (bit % 8); + val = bias << (bit % 8); + + return regmap_update_bits(adp5585_gpio->regmap, reg, mask, val); +} + +static int adp5585_gpio_set_drive(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, enum pin_config_param drive) +{ + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_GPO_OUT_MODE_A + bank, bit, + drive == PIN_CONFIG_DRIVE_OPEN_DRAIN ? bit : 0); +} + +static int adp5585_gpio_set_debounce(struct adp5585_gpio_dev *adp5585_gpio, + unsigned int off, unsigned int debounce) +{ + unsigned int bank = ADP5585_BANK(off); + unsigned int bit = ADP5585_BIT(off); + + return regmap_update_bits(adp5585_gpio->regmap, + ADP5585_DEBOUNCE_DIS_A + bank, bit, + debounce ? 0 : bit); +} + +static int adp5585_gpio_set_config(struct gpio_chip *chip, unsigned int off, + unsigned long config) +{ + struct adp5585_gpio_dev *adp5585_gpio = gpiochip_get_data(chip); + enum pin_config_param param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + return adp5585_gpio_set_bias(adp5585_gpio, off, + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_BIAS_PULL_DOWN: + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? + ADP5585_Rx_PULL_CFG_PD_300K : + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_BIAS_PULL_UP: + return adp5585_gpio_set_bias(adp5585_gpio, off, arg ? + ADP5585_Rx_PULL_CFG_PU_300K : + ADP5585_Rx_PULL_CFG_DISABLE); + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + case PIN_CONFIG_DRIVE_PUSH_PULL: + return adp5585_gpio_set_drive(adp5585_gpio, off, param); + + case PIN_CONFIG_INPUT_DEBOUNCE: + return adp5585_gpio_set_debounce(adp5585_gpio, off, arg); + + default: + return -ENOTSUPP; + }; +} + +static int adp5585_gpio_probe(struct platform_device *pdev) +{ + struct adp5585_dev *adp5585 = dev_get_drvdata(pdev->dev.parent); + struct adp5585_gpio_dev *adp5585_gpio; + struct device *dev = &pdev->dev; + struct gpio_chip *gc; + int ret; + + adp5585_gpio = devm_kzalloc(dev, sizeof(*adp5585_gpio), GFP_KERNEL); + if (!adp5585_gpio) + return -ENOMEM; + + adp5585_gpio->regmap = adp5585->regmap; + + device_set_of_node_from_dev(dev, dev->parent); + + gc = &adp5585_gpio->gpio_chip; + gc->parent = dev; + gc->get_direction = adp5585_gpio_get_direction; + gc->direction_input = adp5585_gpio_direction_input; + gc->direction_output = adp5585_gpio_direction_output; + gc->get = adp5585_gpio_get_value; + gc->set = adp5585_gpio_set_value; + gc->set_config = adp5585_gpio_set_config; + gc->can_sleep = true; + + gc->base = -1; + gc->ngpio = ADP5585_GPIO_MAX; + gc->label = pdev->name; + gc->owner = THIS_MODULE; + + ret = devm_gpiochip_add_data(dev, &adp5585_gpio->gpio_chip, + adp5585_gpio); + if (ret) + return dev_err_probe(dev, ret, "failed to add GPIO chip\n"); + + return 0; +} + +static const struct platform_device_id adp5585_gpio_id_table[] = { + { "adp5585-gpio" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, adp5585_gpio_id_table); + +static struct platform_driver adp5585_gpio_driver = { + .driver = { + .name = "adp5585-gpio", + }, + .probe = adp5585_gpio_probe, + .id_table = adp5585_gpio_id_table, +}; +module_platform_driver(adp5585_gpio_driver); + +MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); +MODULE_DESCRIPTION("GPIO ADP5585 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index bc8be2e593b6..f9325bcce1b9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -20,6 +20,18 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ADP5585 + tristate "Analog Devices ADP5585 keypad decoder and I/O expander driver" + select MFD_CORE + select REGMAP_I2C + depends on I2C + depends on OF || COMPILE_TEST + help + Say yes here to add support for the Analog Devices ADP5585 GPIO + expander, PWM and keypad controller. This includes the I2C driver and + the core APIs _only_, you have to select individual components like + the GPIO and PWM functions under the corresponding menus. + config MFD_ALTERA_A10SR bool "Altera Arria10 DevKit System Resource chip" depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 02b651cd7535..2a9f91e81af8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -193,6 +193,7 @@ obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o +obj-$(CONFIG_MFD_ADP5585) += adp5585.o obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/adp5585.c b/drivers/mfd/adp5585.c new file mode 100644 index 000000000000..160e0b38106a --- /dev/null +++ b/drivers/mfd/adp5585.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller + * + * Copyright 2022 NXP + * Copyright 2024 Ideas on Board Oy + */ + +#include <linux/array_size.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mfd/adp5585.h> +#include <linux/mfd/core.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/types.h> + +static const struct mfd_cell adp5585_devs[] = { + { .name = "adp5585-gpio", }, + { .name = "adp5585-pwm", }, +}; + +static const struct regmap_range adp5585_volatile_ranges[] = { + regmap_reg_range(ADP5585_ID, ADP5585_GPI_STATUS_B), +}; + +static const struct regmap_access_table adp5585_volatile_regs = { + .yes_ranges = adp5585_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(adp5585_volatile_ranges), +}; + +/* + * Chip variants differ in the default configuration of pull-up and pull-down + * resistors, and therefore have different default register values: + * + * - The -00, -01 and -03 variants (collectively referred to as + * ADP5585_REGMAP_00) have pull-up on all GPIO pins by default. + * - The -02 variant has no default pull-up or pull-down resistors. + * - The -04 variant has default pull-down resistors on all GPIO pins. + */ + +static const u8 adp5585_regmap_defaults_00[ADP5585_MAX_REG + 1] = { + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x18 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static const u8 adp5585_regmap_defaults_02[ADP5585_MAX_REG + 1] = { + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, + /* 0x18 */ 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static const u8 adp5585_regmap_defaults_04[ADP5585_MAX_REG + 1] = { + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, + /* 0x18 */ 0x05, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +enum adp5585_regmap_type { + ADP5585_REGMAP_00, + ADP5585_REGMAP_02, + ADP5585_REGMAP_04, +}; + +static const struct regmap_config adp5585_regmap_configs[] = { + [ADP5585_REGMAP_00] = { + .reg_bits = 8, + .val_bits = 8, + .max_register = ADP5585_MAX_REG, + .volatile_table = &adp5585_volatile_regs, + .cache_type = REGCACHE_MAPLE, + .reg_defaults_raw = adp5585_regmap_defaults_00, + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_00), + }, + [ADP5585_REGMAP_02] = { + .reg_bits = 8, + .val_bits = 8, + .max_register = ADP5585_MAX_REG, + .volatile_table = &adp5585_volatile_regs, + .cache_type = REGCACHE_MAPLE, + .reg_defaults_raw = adp5585_regmap_defaults_02, + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_02), + }, + [ADP5585_REGMAP_04] = { + .reg_bits = 8, + .val_bits = 8, + .max_register = ADP5585_MAX_REG, + .volatile_table = &adp5585_volatile_regs, + .cache_type = REGCACHE_MAPLE, + .reg_defaults_raw = adp5585_regmap_defaults_04, + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_04), + }, +}; + +static int adp5585_i2c_probe(struct i2c_client *i2c) +{ + const struct regmap_config *regmap_config; + struct adp5585_dev *adp5585; + unsigned int id; + int ret; + + adp5585 = devm_kzalloc(&i2c->dev, sizeof(*adp5585), GFP_KERNEL); + if (!adp5585) + return -ENOMEM; + + i2c_set_clientdata(i2c, adp5585); + + regmap_config = i2c_get_match_data(i2c); + adp5585->regmap = devm_regmap_init_i2c(i2c, regmap_config); + if (IS_ERR(adp5585->regmap)) + return dev_err_probe(&i2c->dev, PTR_ERR(adp5585->regmap), + "Failed to initialize register map\n"); + + ret = regmap_read(adp5585->regmap, ADP5585_ID, &id); + if (ret) + return dev_err_probe(&i2c->dev, ret, + "Failed to read device ID\n"); + + if ((id & ADP5585_MAN_ID_MASK) != ADP5585_MAN_ID_VALUE) + return dev_err_probe(&i2c->dev, -ENODEV, + "Invalid device ID 0x%02x\n", id); + + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, + adp5585_devs, ARRAY_SIZE(adp5585_devs), + NULL, 0, NULL); + if (ret) + return dev_err_probe(&i2c->dev, ret, + "Failed to add child devices\n"); + + return 0; +} + +static int adp5585_suspend(struct device *dev) +{ + struct adp5585_dev *adp5585 = dev_get_drvdata(dev); + + regcache_cache_only(adp5585->regmap, true); + + return 0; +} + +static int adp5585_resume(struct device *dev) +{ + struct adp5585_dev *adp5585 = dev_get_drvdata(dev); + + regcache_cache_only(adp5585->regmap, false); + regcache_mark_dirty(adp5585->regmap); + + return regcache_sync(adp5585->regmap); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(adp5585_pm, adp5585_suspend, adp5585_resume); + +static const struct of_device_id adp5585_of_match[] = { + { + .compatible = "adi,adp5585-00", + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], + }, { + .compatible = "adi,adp5585-01", + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], + }, { + .compatible = "adi,adp5585-02", + .data = &adp5585_regmap_configs[ADP5585_REGMAP_02], + }, { + .compatible = "adi,adp5585-03", + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], + }, { + .compatible = "adi,adp5585-04", + .data = &adp5585_regmap_configs[ADP5585_REGMAP_04], + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, adp5585_of_match); + +static struct i2c_driver adp5585_i2c_driver = { + .driver = { + .name = "adp5585", + .of_match_table = adp5585_of_match, + .pm = pm_sleep_ptr(&adp5585_pm), + }, + .probe = adp5585_i2c_probe, +}; +module_i2c_driver(adp5585_i2c_driver); + +MODULE_DESCRIPTION("ADP5585 core driver"); +MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 3e53838990f5..0915c1e7df16 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -47,6 +47,13 @@ config PWM_AB8500 To compile this driver as a module, choose M here: the module will be called pwm-ab8500. +config PWM_ADP5585 + tristate "ADP5585 PWM support" + depends on MFD_ADP5585 + help + This option enables support for the PWM function found in the Analog + Devices ADP5585. + config PWM_APPLE tristate "Apple SoC PWM support" depends on ARCH_APPLE || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 0be4f3e6dd43..9081e0c0e9e0 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o +obj-$(CONFIG_PWM_ADP5585) += pwm-adp5585.o obj-$(CONFIG_PWM_APPLE) += pwm-apple.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 8acbcf5b6673..6e752e148b98 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -325,20 +325,19 @@ EXPORT_SYMBOL_GPL(pwm_adjust_config); * * Returns: 0 on success or a negative error code on failure. */ -int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result, - unsigned long timeout) +static int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result, + unsigned long timeout) { - if (!pwm || !pwm->chip->ops) - return -EINVAL; + struct pwm_chip *chip = pwm->chip; + const struct pwm_ops *ops = chip->ops; - if (!pwm->chip->ops->capture) + if (!ops->capture) return -ENOSYS; guard(mutex)(&pwm_lock); - return pwm->chip->ops->capture(pwm->chip, pwm, result, timeout); + return ops->capture(chip, pwm, result, timeout); } -EXPORT_SYMBOL_GPL(pwm_capture); static struct pwm_chip *pwmchip_find_by_name(const char *name) { diff --git a/drivers/pwm/pwm-adp5585.c b/drivers/pwm/pwm-adp5585.c new file mode 100644 index 000000000000..40472ac5db64 --- /dev/null +++ b/drivers/pwm/pwm-adp5585.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices ADP5585 PWM driver + * + * Copyright 2022 NXP + * Copyright 2024 Ideas on Board Oy + * + * Limitations: + * - The .apply() operation executes atomically, but may not wait for the + * period to complete (this is not documented and would need to be tested). + * - Disabling the PWM drives the output pin to a low level immediately. + * - The hardware can only generate normal polarity output. + */ + +#include <asm/byteorder.h> + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/math64.h> +#include <linux/mfd/adp5585.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/time.h> +#include <linux/types.h> + +#define ADP5585_PWM_CHAN_NUM 1 + +#define ADP5585_PWM_OSC_FREQ_HZ 1000000U +#define ADP5585_PWM_MIN_PERIOD_NS (2ULL * NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ) +#define ADP5585_PWM_MAX_PERIOD_NS (2ULL * 0xffff * NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ) + +static int pwm_adp5585_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct regmap *regmap = pwmchip_get_drvdata(chip); + + /* Configure the R3 pin as PWM output. */ + return regmap_update_bits(regmap, ADP5585_PIN_CONFIG_C, + ADP5585_R3_EXTEND_CFG_MASK, + ADP5585_R3_EXTEND_CFG_PWM_OUT); +} + +static void pwm_adp5585_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct regmap *regmap = pwmchip_get_drvdata(chip); + + regmap_update_bits(regmap, ADP5585_PIN_CONFIG_C, + ADP5585_R3_EXTEND_CFG_MASK, + ADP5585_R3_EXTEND_CFG_GPIO4); +} + +static int pwm_adp5585_apply(struct pwm_chip *chip, + struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct regmap *regmap = pwmchip_get_drvdata(chip); + u64 period, duty_cycle; + u32 on, off; + __le16 val; + int ret; + + if (!state->enabled) { + regmap_clear_bits(regmap, ADP5585_GENERAL_CFG, ADP5585_OSC_EN); + regmap_clear_bits(regmap, ADP5585_PWM_CFG, ADP5585_PWM_EN); + return 0; + } + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + if (state->period < ADP5585_PWM_MIN_PERIOD_NS) + return -EINVAL; + + period = min(state->period, ADP5585_PWM_MAX_PERIOD_NS); + duty_cycle = min(state->duty_cycle, period); + + /* + * Compute the on and off time. As the internal oscillator frequency is + * 1MHz, the calculation can be simplified without loss of precision. + */ + on = div_u64(duty_cycle, NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ); + off = div_u64(period, NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ) - on; + + val = cpu_to_le16(off); + ret = regmap_bulk_write(regmap, ADP5585_PWM_OFFT_LOW, &val, 2); + if (ret) + return ret; + + val = cpu_to_le16(on); + ret = regmap_bulk_write(regmap, ADP5585_PWM_ONT_LOW, &val, 2); + if (ret) + return ret; + + /* Enable PWM in continuous mode and no external AND'ing. */ + ret = regmap_update_bits(regmap, ADP5585_PWM_CFG, + ADP5585_PWM_IN_AND | ADP5585_PWM_MODE | + ADP5585_PWM_EN, ADP5585_PWM_EN); + if (ret) + return ret; + + ret = regmap_set_bits(regmap, ADP5585_GENERAL_CFG, ADP5585_OSC_EN); + if (ret) + return ret; + + return regmap_set_bits(regmap, ADP5585_PWM_CFG, ADP5585_PWM_EN); +} + +static int pwm_adp5585_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct regmap *regmap = pwmchip_get_drvdata(chip); + unsigned int on, off; + unsigned int val; + __le16 on_off; + int ret; + + ret = regmap_bulk_read(regmap, ADP5585_PWM_OFFT_LOW, &on_off, 2); + if (ret) + return ret; + off = le16_to_cpu(on_off); + + ret = regmap_bulk_read(regmap, ADP5585_PWM_ONT_LOW, &on_off, 2); + if (ret) + return ret; + on = le16_to_cpu(on_off); + + state->duty_cycle = on * (NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ); + state->period = (on + off) * (NSEC_PER_SEC / ADP5585_PWM_OSC_FREQ_HZ); + + state->polarity = PWM_POLARITY_NORMAL; + + regmap_read(regmap, ADP5585_PWM_CFG, &val); + state->enabled = !!(val & ADP5585_PWM_EN); + + return 0; +} + +static const struct pwm_ops adp5585_pwm_ops = { + .request = pwm_adp5585_request, + .free = pwm_adp5585_free, + .apply = pwm_adp5585_apply, + .get_state = pwm_adp5585_get_state, +}; + +static int adp5585_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adp5585_dev *adp5585 = dev_get_drvdata(dev->parent); + struct pwm_chip *chip; + int ret; + + chip = devm_pwmchip_alloc(dev, ADP5585_PWM_CHAN_NUM, 0); + if (IS_ERR(chip)) + return PTR_ERR(chip); + + device_set_of_node_from_dev(dev, dev->parent); + + pwmchip_set_drvdata(chip, adp5585->regmap); + chip->ops = &adp5585_pwm_ops; + + ret = devm_pwmchip_add(dev, chip); + if (ret) + return dev_err_probe(dev, ret, "failed to add PWM chip\n"); + + return 0; +} + +static const struct platform_device_id adp5585_pwm_id_table[] = { + { "adp5585-pwm" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, adp5585_pwm_id_table); + +static struct platform_driver adp5585_pwm_driver = { + .driver = { + .name = "adp5585-pwm", + }, + .probe = adp5585_pwm_probe, + .id_table = adp5585_pwm_id_table, +}; +module_platform_driver(adp5585_pwm_driver); + +MODULE_AUTHOR("Xiaoning Wang <xiaoning.wang@nxp.com>"); +MODULE_DESCRIPTION("ADP5585 PWM Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c index 2afb302be02c..387a0d1fa4f2 100644 --- a/drivers/pwm/pwm-atmel-hlcdc.c +++ b/drivers/pwm/pwm-atmel-hlcdc.c @@ -234,7 +234,7 @@ static const struct of_device_id atmel_hlcdc_dt_ids[] = { .data = &atmel_hlcdc_pwm_sama5d3_errata, }, { .compatible = "microchip,sam9x60-hlcdc", }, - { /* sentinel */ }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids); @@ -288,8 +288,9 @@ static void atmel_hlcdc_pwm_remove(struct platform_device *pdev) static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = { { .compatible = "atmel,hlcdc-pwm" }, - { /* sentinel */ }, + { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, atmel_hlcdc_pwm_dt_ids); static struct platform_driver atmel_hlcdc_pwm_driver = { .driver = { @@ -298,7 +299,7 @@ static struct platform_driver atmel_hlcdc_pwm_driver = { .pm = pm_ptr(&atmel_hlcdc_pwm_pm_ops), }, .probe = atmel_hlcdc_pwm_probe, - .remove_new = atmel_hlcdc_pwm_remove, + .remove = atmel_hlcdc_pwm_remove, }; module_platform_driver(atmel_hlcdc_pwm_driver); diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c index f9a9c12cbcdd..5ee4254d1e48 100644 --- a/drivers/pwm/pwm-atmel-tcb.c +++ b/drivers/pwm/pwm-atmel-tcb.c @@ -527,7 +527,7 @@ static struct platform_driver atmel_tcb_pwm_driver = { .pm = pm_ptr(&atmel_tcb_pwm_pm_ops), }, .probe = atmel_tcb_pwm_probe, - .remove_new = atmel_tcb_pwm_remove, + .remove = atmel_tcb_pwm_remove, }; module_platform_driver(atmel_tcb_pwm_driver); diff --git a/drivers/pwm/pwm-axi-pwmgen.c b/drivers/pwm/pwm-axi-pwmgen.c index 3ad60edf20a5..b5477659ba18 100644 --- a/drivers/pwm/pwm-axi-pwmgen.c +++ b/drivers/pwm/pwm-axi-pwmgen.c @@ -29,7 +29,6 @@ #include <linux/regmap.h> #include <linux/slab.h> -#define AXI_PWMGEN_REG_CORE_VERSION 0x00 #define AXI_PWMGEN_REG_ID 0x04 #define AXI_PWMGEN_REG_SCRATCHPAD 0x08 #define AXI_PWMGEN_REG_CORE_MAGIC 0x0C @@ -145,7 +144,7 @@ static int axi_pwmgen_setup(struct regmap *regmap, struct device *dev) "failed to read expected value from register: got %08x, expected %08x\n", val, AXI_PWMGEN_REG_CORE_MAGIC_VAL); - ret = regmap_read(regmap, AXI_PWMGEN_REG_CORE_VERSION, &val); + ret = regmap_read(regmap, ADI_AXI_REG_VERSION, &val); if (ret) return ret; diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c index c19a482d7e28..f8f5af57acba 100644 --- a/drivers/pwm/pwm-clk.c +++ b/drivers/pwm/pwm-clk.c @@ -130,7 +130,7 @@ static struct platform_driver pwm_clk_driver = { .of_match_table = pwm_clk_dt_ids, }, .probe = pwm_clk_probe, - .remove_new = pwm_clk_remove, + .remove = pwm_clk_remove, }; module_platform_driver(pwm_clk_driver); diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c index 2eb0b13d4e10..e02ee6383dbc 100644 --- a/drivers/pwm/pwm-hibvt.c +++ b/drivers/pwm/pwm-hibvt.c @@ -276,7 +276,7 @@ static struct platform_driver hibvt_pwm_driver = { .of_match_table = hibvt_pwm_of_match, }, .probe = hibvt_pwm_probe, - .remove_new = hibvt_pwm_remove, + .remove = hibvt_pwm_remove, }; module_platform_driver(hibvt_pwm_driver); diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index d6596583ed4e..71542956feca 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -416,7 +416,7 @@ static struct platform_driver img_pwm_driver = { .of_match_table = img_pwm_of_match, }, .probe = img_pwm_probe, - .remove_new = img_pwm_remove, + .remove = img_pwm_remove, }; module_platform_driver(img_pwm_driver); diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c index 61189cea1046..90b0733c00c1 100644 --- a/drivers/pwm/pwm-lp3943.c +++ b/drivers/pwm/pwm-lp3943.c @@ -218,8 +218,7 @@ static int lp3943_pwm_parse_dt(struct device *dev, struct lp3943_platform_data *pdata; struct lp3943_pwm_map *pwm_map; enum lp3943_pwm_output *output; - int i, err, proplen, count = 0; - u32 num_outputs; + int i, err, num_outputs, count = 0; if (!node) return -EINVAL; @@ -234,11 +233,8 @@ static int lp3943_pwm_parse_dt(struct device *dev, */ for (i = 0; i < LP3943_NUM_PWMS; i++) { - if (!of_get_property(node, name[i], &proplen)) - continue; - - num_outputs = proplen / sizeof(u32); - if (num_outputs == 0) + num_outputs = of_property_count_u32_elems(node, name[i]); + if (num_outputs <= 0) continue; output = devm_kcalloc(dev, num_outputs, sizeof(*output), diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c index 04b76d257fd8..f351baa63453 100644 --- a/drivers/pwm/pwm-lpc18xx-sct.c +++ b/drivers/pwm/pwm-lpc18xx-sct.c @@ -446,7 +446,7 @@ static struct platform_driver lpc18xx_pwm_driver = { .of_match_table = lpc18xx_pwm_of_match, }, .probe = lpc18xx_pwm_probe, - .remove_new = lpc18xx_pwm_remove, + .remove = lpc18xx_pwm_remove, }; module_platform_driver(lpc18xx_pwm_driver); diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c index cd51c4a938f5..1858a77401f8 100644 --- a/drivers/pwm/pwm-omap-dmtimer.c +++ b/drivers/pwm/pwm-omap-dmtimer.c @@ -355,7 +355,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev) goto err_platdata; } - if (!of_get_property(timer, "ti,timer-pwm", NULL)) { + if (!of_property_read_bool(timer, "ti,timer-pwm")) { dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n"); ret = -ENODEV; goto err_timer_property; @@ -455,7 +455,7 @@ static struct platform_driver pwm_omap_dmtimer_driver = { .of_match_table = pwm_omap_dmtimer_of_match, }, .probe = pwm_omap_dmtimer_probe, - .remove_new = pwm_omap_dmtimer_remove, + .remove = pwm_omap_dmtimer_remove, }; module_platform_driver(pwm_omap_dmtimer_driver); diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c index 4cfecd88ede0..2261789cc27d 100644 --- a/drivers/pwm/pwm-rcar.c +++ b/drivers/pwm/pwm-rcar.c @@ -253,7 +253,7 @@ MODULE_DEVICE_TABLE(of, rcar_pwm_of_table); static struct platform_driver rcar_pwm_driver = { .probe = rcar_pwm_probe, - .remove_new = rcar_pwm_remove, + .remove = rcar_pwm_remove, .driver = { .name = "pwm-rcar", .of_match_table = rcar_pwm_of_table, diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c index 0fa7575dbb54..c5f50e5eaf41 100644 --- a/drivers/pwm/pwm-rockchip.c +++ b/drivers/pwm/pwm-rockchip.c @@ -386,7 +386,7 @@ static struct platform_driver rockchip_pwm_driver = { .of_match_table = rockchip_pwm_dt_ids, }, .probe = rockchip_pwm_probe, - .remove_new = rockchip_pwm_remove, + .remove = rockchip_pwm_remove, }; module_platform_driver(rockchip_pwm_driver); diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c index ed7957cc51fd..d5b647e6be78 100644 --- a/drivers/pwm/pwm-sifive.c +++ b/drivers/pwm/pwm-sifive.c @@ -336,7 +336,7 @@ MODULE_DEVICE_TABLE(of, pwm_sifive_of_match); static struct platform_driver pwm_sifive_driver = { .probe = pwm_sifive_probe, - .remove_new = pwm_sifive_remove, + .remove = pwm_sifive_remove, .driver = { .name = "pwm-sifive", .of_match_table = pwm_sifive_of_match, diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index f85eb41cb084..eb24054f9729 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -222,7 +222,7 @@ static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, scale = max_arr / min(max_arr, raw_prd); } else { - scale = priv->max_arr; /* bellow resolution, use max scale */ + scale = priv->max_arr; /* below resolution, use max scale */ } if (psc && scale > 1) { diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index 5c29590d1821..e60dc7d6b591 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -493,7 +493,7 @@ static struct platform_driver sun4i_pwm_driver = { .of_match_table = sun4i_pwm_dt_ids, }, .probe = sun4i_pwm_probe, - .remove_new = sun4i_pwm_remove, + .remove = sun4i_pwm_remove, }; module_platform_driver(sun4i_pwm_driver); diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index a3d69976148f..172063b51d44 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -432,7 +432,7 @@ static struct platform_driver tegra_pwm_driver = { .pm = &tegra_pwm_pm_ops, }, .probe = tegra_pwm_probe, - .remove_new = tegra_pwm_remove, + .remove = tegra_pwm_remove, }; module_platform_driver(tegra_pwm_driver); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index d6c2b1b1387e..d91b2bdc88fc 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -324,7 +324,7 @@ static struct platform_driver ecap_pwm_driver = { .pm = pm_ptr(&ecap_pwm_pm_ops), }, .probe = ecap_pwm_probe, - .remove_new = ecap_pwm_remove, + .remove = ecap_pwm_remove, }; module_platform_driver(ecap_pwm_driver); diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index e5104725d9b7..0125e73b98df 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -603,7 +603,7 @@ static struct platform_driver ehrpwm_pwm_driver = { .pm = pm_ptr(&ehrpwm_pwm_pm_ops), }, .probe = ehrpwm_pwm_probe, - .remove_new = ehrpwm_pwm_remove, + .remove = ehrpwm_pwm_remove, }; module_platform_driver(ehrpwm_pwm_driver); diff --git a/include/linux/mfd/adp5585.h b/include/linux/mfd/adp5585.h new file mode 100644 index 000000000000..016033cd68e4 --- /dev/null +++ b/include/linux/mfd/adp5585.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller + * + * Copyright 2022 NXP + * Copyright 2024 Ideas on Board Oy + */ + +#ifndef __MFD_ADP5585_H_ +#define __MFD_ADP5585_H_ + +#include <linux/bits.h> + +#define ADP5585_ID 0x00 +#define ADP5585_MAN_ID_VALUE 0x20 +#define ADP5585_MAN_ID_MASK GENMASK(7, 4) +#define ADP5585_INT_STATUS 0x01 +#define ADP5585_STATUS 0x02 +#define ADP5585_FIFO_1 0x03 +#define ADP5585_FIFO_2 0x04 +#define ADP5585_FIFO_3 0x05 +#define ADP5585_FIFO_4 0x06 +#define ADP5585_FIFO_5 0x07 +#define ADP5585_FIFO_6 0x08 +#define ADP5585_FIFO_7 0x09 +#define ADP5585_FIFO_8 0x0a +#define ADP5585_FIFO_9 0x0b +#define ADP5585_FIFO_10 0x0c +#define ADP5585_FIFO_11 0x0d +#define ADP5585_FIFO_12 0x0e +#define ADP5585_FIFO_13 0x0f +#define ADP5585_FIFO_14 0x10 +#define ADP5585_FIFO_15 0x11 +#define ADP5585_FIFO_16 0x12 +#define ADP5585_GPI_INT_STAT_A 0x13 +#define ADP5585_GPI_INT_STAT_B 0x14 +#define ADP5585_GPI_STATUS_A 0x15 +#define ADP5585_GPI_STATUS_B 0x16 +#define ADP5585_RPULL_CONFIG_A 0x17 +#define ADP5585_RPULL_CONFIG_B 0x18 +#define ADP5585_RPULL_CONFIG_C 0x19 +#define ADP5585_RPULL_CONFIG_D 0x1a +#define ADP5585_Rx_PULL_CFG_PU_300K 0 +#define ADP5585_Rx_PULL_CFG_PD_300K 1 +#define ADP5585_Rx_PULL_CFG_PU_100K 2 +#define ADP5585_Rx_PULL_CFG_DISABLE 3 +#define ADP5585_Rx_PULL_CFG_MASK 3 +#define ADP5585_GPI_INT_LEVEL_A 0x1b +#define ADP5585_GPI_INT_LEVEL_B 0x1c +#define ADP5585_GPI_EVENT_EN_A 0x1d +#define ADP5585_GPI_EVENT_EN_B 0x1e +#define ADP5585_GPI_INTERRUPT_EN_A 0x1f +#define ADP5585_GPI_INTERRUPT_EN_B 0x20 +#define ADP5585_DEBOUNCE_DIS_A 0x21 +#define ADP5585_DEBOUNCE_DIS_B 0x22 +#define ADP5585_GPO_DATA_OUT_A 0x23 +#define ADP5585_GPO_DATA_OUT_B 0x24 +#define ADP5585_GPO_OUT_MODE_A 0x25 +#define ADP5585_GPO_OUT_MODE_B 0x26 +#define ADP5585_GPIO_DIRECTION_A 0x27 +#define ADP5585_GPIO_DIRECTION_B 0x28 +#define ADP5585_RESET1_EVENT_A 0x29 +#define ADP5585_RESET1_EVENT_B 0x2a +#define ADP5585_RESET1_EVENT_C 0x2b +#define ADP5585_RESET2_EVENT_A 0x2c +#define ADP5585_RESET2_EVENT_B 0x2d +#define ADP5585_RESET_CFG 0x2e +#define ADP5585_PWM_OFFT_LOW 0x2f +#define ADP5585_PWM_OFFT_HIGH 0x30 +#define ADP5585_PWM_ONT_LOW 0x31 +#define ADP5585_PWM_ONT_HIGH 0x32 +#define ADP5585_PWM_CFG 0x33 +#define ADP5585_PWM_IN_AND BIT(2) +#define ADP5585_PWM_MODE BIT(1) +#define ADP5585_PWM_EN BIT(0) +#define ADP5585_LOGIC_CFG 0x34 +#define ADP5585_LOGIC_FF_CFG 0x35 +#define ADP5585_LOGIC_INT_EVENT_EN 0x36 +#define ADP5585_POLL_PTIME_CFG 0x37 +#define ADP5585_PIN_CONFIG_A 0x38 +#define ADP5585_PIN_CONFIG_B 0x39 +#define ADP5585_PIN_CONFIG_C 0x3a +#define ADP5585_PULL_SELECT BIT(7) +#define ADP5585_C4_EXTEND_CFG_GPIO11 (0U << 6) +#define ADP5585_C4_EXTEND_CFG_RESET2 (1U << 6) +#define ADP5585_C4_EXTEND_CFG_MASK GENMASK(6, 6) +#define ADP5585_R4_EXTEND_CFG_GPIO5 (0U << 5) +#define ADP5585_R4_EXTEND_CFG_RESET1 (1U << 5) +#define ADP5585_R4_EXTEND_CFG_MASK GENMASK(5, 5) +#define ADP5585_R3_EXTEND_CFG_GPIO4 (0U << 2) +#define ADP5585_R3_EXTEND_CFG_LC (1U << 2) +#define ADP5585_R3_EXTEND_CFG_PWM_OUT (2U << 2) +#define ADP5585_R3_EXTEND_CFG_MASK GENMASK(3, 2) +#define ADP5585_R0_EXTEND_CFG_GPIO1 (0U << 0) +#define ADP5585_R0_EXTEND_CFG_LY (1U << 0) +#define ADP5585_R0_EXTEND_CFG_MASK GENMASK(0, 0) +#define ADP5585_GENERAL_CFG 0x3b +#define ADP5585_OSC_EN BIT(7) +#define ADP5585_OSC_FREQ_50KHZ (0U << 5) +#define ADP5585_OSC_FREQ_100KHZ (1U << 5) +#define ADP5585_OSC_FREQ_200KHZ (2U << 5) +#define ADP5585_OSC_FREQ_500KHZ (3U << 5) +#define ADP5585_OSC_FREQ_MASK GENMASK(6, 5) +#define ADP5585_INT_CFG BIT(1) +#define ADP5585_RST_CFG BIT(0) +#define ADP5585_INT_EN 0x3c + +#define ADP5585_MAX_REG ADP5585_INT_EN + +/* + * Bank 0 covers pins "GPIO 1/R0" to "GPIO 6/R5", numbered 0 to 5 by the + * driver, and bank 1 covers pins "GPIO 7/C0" to "GPIO 11/C4", numbered 6 to + * 10. Some variants of the ADP5585 don't support "GPIO 6/R5". As the driver + * uses identical GPIO numbering for all variants to avoid confusion, GPIO 5 is + * marked as reserved in the device tree for variants that don't support it. + */ +#define ADP5585_BANK(n) ((n) >= 6 ? 1 : 0) +#define ADP5585_BIT(n) ((n) >= 6 ? BIT((n) - 6) : BIT(n)) + +struct regmap; + +struct adp5585_dev { + struct regmap *regmap; +}; + +#endif diff --git a/include/linux/pwm.h b/include/linux/pwm.h index f8c2dc12dbd3..8acd60b53f58 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -394,9 +394,6 @@ static inline bool pwm_might_sleep(struct pwm_device *pwm) } /* PWM provider APIs */ -int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result, - unsigned long timeout); - void pwmchip_put(struct pwm_chip *chip); struct pwm_chip *pwmchip_alloc(struct device *parent, unsigned int npwm, size_t sizeof_priv); struct pwm_chip *devm_pwmchip_alloc(struct device *parent, unsigned int npwm, size_t sizeof_priv); @@ -462,13 +459,6 @@ static inline void pwm_disable(struct pwm_device *pwm) might_sleep(); } -static inline int pwm_capture(struct pwm_device *pwm, - struct pwm_capture *result, - unsigned long timeout) -{ - return -EINVAL; -} - static inline void pwmchip_put(struct pwm_chip *chip) { } diff --git a/include/trace/events/pwm.h b/include/trace/events/pwm.h index 12b35e4ff917..8022701c446d 100644 --- a/include/trace/events/pwm.h +++ b/include/trace/events/pwm.h @@ -15,7 +15,8 @@ DECLARE_EVENT_CLASS(pwm, TP_ARGS(pwm, state, err), TP_STRUCT__entry( - __field(struct pwm_device *, pwm) + __field(unsigned int, chipid) + __field(unsigned int, hwpwm) __field(u64, period) __field(u64, duty_cycle) __field(enum pwm_polarity, polarity) @@ -24,7 +25,8 @@ DECLARE_EVENT_CLASS(pwm, ), TP_fast_assign( - __entry->pwm = pwm; + __entry->chipid = pwm->chip->id; + __entry->hwpwm = pwm->hwpwm; __entry->period = state->period; __entry->duty_cycle = state->duty_cycle; __entry->polarity = state->polarity; @@ -32,8 +34,8 @@ DECLARE_EVENT_CLASS(pwm, __entry->err = err; ), - TP_printk("%p: period=%llu duty_cycle=%llu polarity=%d enabled=%d err=%d", - __entry->pwm, __entry->period, __entry->duty_cycle, + TP_printk("pwmchip%u.%u: period=%llu duty_cycle=%llu polarity=%d enabled=%d err=%d", + __entry->chipid, __entry->hwpwm, __entry->period, __entry->duty_cycle, __entry->polarity, __entry->enabled, __entry->err) ); |