diff options
33 files changed, 1331 insertions, 287 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml new file mode 100644 index 000000000000..94d72aeaad0f --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/ahci-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Serial ATA AHCI controllers + +maintainers: + - Hans de Goede <hdegoede@redhat.com> + - Damien Le Moal <damien.lemoal@opensource.wdc.com> + +description: + This document defines device tree properties for a common AHCI SATA + controller implementation. It's hardware interface is supposed to + conform to the technical standard defined by Intel (see Serial ATA + Advanced Host Controller Interface specification for details). The + document doesn't constitute a DT-node binding by itself but merely + defines a set of common properties for the AHCI-compatible devices. + +select: false + +allOf: + - $ref: sata-common.yaml# + +properties: + reg: + description: + Generic AHCI registers space conforming to the Serial ATA AHCI + specification. + + reg-names: + description: CSR space IDs + contains: + const: ahci + + interrupts: + description: + Generic AHCI state change interrupt. Can be implemented either as a + single line attached to the controller or as a set of the signals + indicating the particular port events. + minItems: 1 + maxItems: 32 + + ahci-supply: + description: Power regulator for AHCI controller + + target-supply: + description: Power regulator for SATA target device + + phy-supply: + description: Power regulator for SATA PHY + + phys: + description: Reference to the SATA PHY node + maxItems: 1 + + phy-names: + const: sata-phy + + hba-cap: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Bitfield of the HBA generic platform capabilities like Staggered + Spin-up or Mechanical Presence Switch support. It can be used to + appropriately initialize the HWinit fields of the HBA CAP register + in case if the system firmware hasn't done it. + + ports-implemented: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Mask that indicates which ports the HBA supports. Useful if PI is not + programmed by the BIOS, which is true for some embedded SoC's. + +patternProperties: + "^sata-port@[0-9a-f]+$": + $ref: '#/$defs/ahci-port' + description: + It is optionally possible to describe the ports as sub-nodes so + to enable each port independently when dealing with multiple PHYs. + +required: + - reg + - interrupts + +additionalProperties: true + +$defs: + ahci-port: + $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port + + properties: + reg: + description: + AHCI SATA port identifier. By design AHCI controller can't have + more than 32 ports due to the CAP.NP fields and PI register size + constraints. + minimum: 0 + maximum: 31 + + phys: + description: Individual AHCI SATA port PHY + maxItems: 1 + + phy-names: + description: AHCI SATA port PHY ID + const: sata-phy + + target-supply: + description: Power regulator for SATA port target device + + hba-port-cap: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + Bitfield of the HBA port-specific platform capabilities like Hot + plugging, eSATA, FIS-based Switching, etc (see AHCI specification + for details). It can be used to initialize the HWinit fields of + the PxCMD register in case if the system firmware hasn't done it. + + required: + - reg + +... diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index c146ab8e14e5..7dc2a2e8f598 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -30,14 +30,11 @@ select: - marvell,armada-3700-ahci - marvell,armada-8k-ahci - marvell,berlin2q-ahci - - snps,dwc-ahci - - snps,spear-ahci required: - compatible allOf: - - $ref: "sata-common.yaml#" - + - $ref: "ahci-common.yaml#" properties: compatible: @@ -49,17 +46,11 @@ properties: - marvell,berlin2-ahci - marvell,berlin2q-ahci - const: generic-ahci - - items: - - enum: - - rockchip,rk3568-dwc-ahci - - const: snps,dwc-ahci - enum: - cavium,octeon-7130-ahci - hisilicon,hisi-ahci - ibm,476gtr-ahci - marvell,armada-3700-ahci - - snps,dwc-ahci - - snps,spear-ahci reg: minItems: 1 @@ -69,92 +60,37 @@ properties: maxItems: 1 clocks: - description: - Clock IDs array as required by the controller. minItems: 1 maxItems: 3 clock-names: - description: - Names of clocks corresponding to IDs in the clock property. minItems: 1 maxItems: 3 interrupts: maxItems: 1 - ahci-supply: - description: - regulator for AHCI controller - - dma-coherent: true - - phy-supply: - description: - regulator for PHY power - - phys: - description: - List of all PHYs on this controller - maxItems: 1 - - phy-names: - description: - Name specifier for the PHYs - maxItems: 1 - - ports-implemented: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: | - Mask that indicates which ports that the HBA supports - are available for software to use. Useful if PORTS_IMPL - is not programmed by the BIOS, which is true with - some embedded SoCs. - maximum: 0x1f - power-domains: maxItems: 1 resets: maxItems: 1 - target-supply: - description: - regulator for SATA target power - -required: - - compatible - - reg - - interrupts - patternProperties: "^sata-port@[0-9a-f]+$": - type: object - additionalProperties: false - description: - Subnode with configuration of the Ports. - - properties: - reg: - maxItems: 1 - - phys: - maxItems: 1 - - phy-names: - maxItems: 1 - - target-supply: - description: - regulator for SATA target power - - required: - - reg + $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port anyOf: - required: [ phys ] - required: [ target-supply ] + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + unevaluatedProperties: false examples: @@ -167,6 +103,8 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/berlin2q.h> + #include <dt-bindings/ata/ahci.h> + sata@f7e90000 { compatible = "marvell,berlin2q-ahci", "generic-ahci"; reg = <0xf7e90000 0x1000>; @@ -175,15 +113,23 @@ examples: #address-cells = <1>; #size-cells = <0>; + hba-cap = <HBA_SMPS>; + sata0: sata-port@0 { reg = <0>; + phys = <&sata_phy 0>; target-supply = <®_sata0>; + + hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>; }; sata1: sata-port@1 { reg = <1>; + phys = <&sata_phy 1>; target-supply = <®_sata1>; + + hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>; }; }; diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml new file mode 100644 index 000000000000..9b7ca4759bd7 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 SoC AHCI SATA controller + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + AHCI SATA controller embedded into the Baikal-T1 SoC is based on the + DWC AHCI SATA v4.10a IP-core. + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + const: baikal,bt1-ahci + + clocks: + items: + - description: Peripheral APB bus clock + - description: Application AXI BIU clock + - description: SATA Ports reference clock + + clock-names: + items: + - const: pclk + - const: aclk + - const: ref + + resets: + items: + - description: Application AXI BIU domain reset + - description: SATA Ports clock domain reset + + reset-names: + items: + - const: arst + - const: ref + + ports-implemented: + maximum: 0x3 + +patternProperties: + "^sata-port@[0-1]$": + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + properties: + reg: + minimum: 0 + maximum: 1 + + snps,tx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Due to having AXI3 bus interface utilized the maximum Tx DMA + transaction size can't exceed 16 beats (AxLEN[3:0]). + enum: [ 1, 2, 4, 8, 16 ] + + snps,rx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Due to having AXI3 bus interface utilized the maximum Rx DMA + transaction size can't exceed 16 beats (AxLEN[3:0]). + enum: [ 1, 2, 4, 8, 16 ] + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + sata@1f050000 { + compatible = "baikal,bt1-ahci"; + reg = <0x1f050000 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <0 64 4>; + + clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>; + clock-names = "pclk", "aclk", "ref"; + + resets = <&ccu_axi 2>, <&ccu_sys 0>; + reset-names = "arst", "ref"; + + ports-implemented = <0x3>; + + sata-port@0 { + reg = <0>; + + snps,tx-ts-max = <4>; + snps,rx-ts-max = <4>; + }; + + sata-port@1 { + reg = <1>; + + snps,tx-ts-max = <4>; + snps,rx-ts-max = <4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml index 235a93ac86b0..fa8ebc8f243f 100644 --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml @@ -14,7 +14,7 @@ maintainers: - Florian Fainelli <f.fainelli@gmail.com> allOf: - - $ref: sata-common.yaml# + - $ref: ahci-common.yaml# properties: compatible: @@ -41,8 +41,6 @@ properties: interrupts: maxItems: 1 - dma-coherent: true - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 7ac77b1c5850..58c9342b9925 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -31,22 +31,27 @@ properties: "#size-cells": const: 0 + dma-coherent: true + patternProperties: "^sata-port@[0-9a-e]$": + $ref: '#/$defs/sata-port' description: | DT nodes for ports connected on the SATA host. The SATA port nodes will be named "sata-port". + +additionalProperties: true + +$defs: + sata-port: type: object properties: reg: minimum: 0 - maximum: 14 description: - The ID number of the drive port SATA can potentially use a port - multiplier making it possible to connect up to 15 disks to a single - SATA port. - -additionalProperties: true + The ID number of the SATA port. Aside with being directly used, + each port can have a Port Multiplier attached thus allowing to + access more than one drive by means of a single SATA port. ... diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml new file mode 100644 index 000000000000..c1457910520b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller properties + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + This document defines device tree schema for the generic Synopsys DWC + AHCI controller properties. + +select: false + +allOf: + - $ref: ahci-common.yaml# + +properties: + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock, + PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx) + clock, etc. + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + oneOf: + - description: Application APB/AHB/AXI BIU clock + enum: + - pclk + - aclk + - hclk + - sata + - description: Power Module keep-alive clock + const: pmalive + - description: RxOOB detection clock + const: rxoob + - description: SATA Ports reference clock + const: ref + + resets: + description: + At least basic application and reference clock domains resets are + normally supported by the DWC AHCI SATA controller. + minItems: 1 + maxItems: 4 + + reset-names: + minItems: 1 + maxItems: 4 + items: + oneOf: + - description: Application AHB/AXI BIU clock domain reset control + enum: + - arst + - hrst + - description: Power Module keep-alive clock domain reset control + const: pmalive + - description: RxOOB detection clock domain reset control + const: rxoob + - description: Reference clock domain reset control + const: ref + +patternProperties: + "^sata-port@[0-9a-e]$": + $ref: '#/$defs/dwc-ahci-port' + +additionalProperties: true + +$defs: + dwc-ahci-port: + $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port + + properties: + reg: + minimum: 0 + maximum: 7 + + snps,tx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Maximal size of Tx DMA transactions in FIFO words + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ] + + snps,rx-ts-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Maximal size of Rx DMA transactions in FIFO words + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ] + +... diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml new file mode 100644 index 000000000000..5afa4b57ce20 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + This document defines device tree bindings for the generic Synopsys DWC + implementation of the AHCI SATA controller. + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + oneOf: + - description: Synopsys AHCI SATA-compatible devices + const: snps,dwc-ahci + - description: SPEAr1340 AHCI SATA device + const: snps,spear-ahci + - description: Rockhip RK3568 AHCI controller + items: + - const: rockchip,rk3568-dwc-ahci + - const: snps,dwc-ahci + +patternProperties: + "^sata-port@[0-9a-e]$": + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/ata/ahci.h> + + sata@122f0000 { + compatible = "snps,dwc-ahci"; + reg = <0x122F0000 0x1ff>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&clock1>, <&clock2>; + clock-names = "aclk", "ref"; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + + ports-implemented = <0x1>; + + sata-port@0 { + reg = <0>; + + hba-port-cap = <HBA_PORT_FBSCP>; + + snps,tx-ts-max = <512>; + snps,rx-ts-max = <512>; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 700aa009f56a..f610d8bb82d0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11584,6 +11584,15 @@ F: drivers/ata/ahci_platform.c F: drivers/ata/libahci_platform.c F: include/linux/ahci_platform.h +LIBATA SATA AHCI SYNOPSYS DWC CONTROLLER DRIVER +M: Serge Semin <fancer.lancer@gmail.com> +L: linux-ide@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git +F: Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml +F: Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +F: drivers/ata/ahci_dwc.c + LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER M: Mikael Pettersson <mikpelinux@gmail.com> L: linux-ide@vger.kernel.org diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 2ef226194c3a..b1519b4dc03a 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -256,7 +256,6 @@ menuconfig ARCH_VEXPRESS select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM select CLK_ICST select NO_IOPORT_MAP select PLAT_VERSATILE diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 0e48d1e4c578..fb8463c028b2 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -195,7 +195,6 @@ config ARM64 select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KVM select HAVE_NMI - select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 1c9f4fb2595d..36833a862998 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -176,9 +176,19 @@ config AHCI_DM816 If unsure, say N. +config AHCI_DWC + tristate "Synopsys DWC AHCI SATA support" + select SATA_HOST + select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST) + help + This option enables support for the Synopsys DWC AHCI SATA + controller implementation. + + If unsure, say N. + config AHCI_ST tristate "ST AHCI SATA support" - depends on ARCH_STI + depends on ARCH_STI || COMPILE_TEST select SATA_HOST help This option enables support for ST AHCI SATA controller. @@ -1102,8 +1112,7 @@ config PATA_PCMCIA If unsure, say N. config PATA_PLATFORM - tristate "Generic platform device PATA support" - depends on EXPERT || PPC || HAVE_PATA_PLATFORM + tristate "Generic platform device PATA support" if HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. @@ -1112,7 +1121,8 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && OF + depends on OF + select PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b8aebfb14e82..34623365d9a6 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_DWC) += ahci_dwc.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MTK) += ahci_mtk.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c1eca72b4575..639de2d75d63 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -657,7 +657,7 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev, { if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); - hpriv->force_port_map = 1; + hpriv->saved_port_map = 1; } /* @@ -690,7 +690,7 @@ static void ahci_pci_init_controller(struct ata_host *host) mv = 2; else mv = 4; - port_mmio = __ahci_port_base(host, mv); + port_mmio = __ahci_port_base(hpriv, mv); writel(0, port_mmio + PORT_IRQ_MASK); @@ -1609,15 +1609,12 @@ static void ahci_update_initial_lpm_policy(struct ata_port *ap, goto update_policy; } -#ifdef CONFIG_ACPI - if (policy > ATA_LPM_MED_POWER && - (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) { + if (policy > ATA_LPM_MED_POWER && pm_suspend_default_s2idle()) { if (hpriv->cap & HOST_CAP_PART) policy = ATA_LPM_MIN_POWER_WITH_PARTIAL; else if (hpriv->cap & HOST_CAP_SSC) policy = ATA_LPM_MIN_POWER; } -#endif update_policy: if (policy >= ATA_LPM_UNKNOWN && policy <= ATA_LPM_MIN_POWER) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index ad11a4c52fbe..da7ee8bec165 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -38,7 +38,6 @@ enum { AHCI_MAX_PORTS = 32, - AHCI_MAX_CLKS = 5, AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_MAX_CMDS = 32, @@ -139,7 +138,7 @@ enum { PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_DMPS = (1 << 7), /* mechanical presence status */ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ @@ -167,6 +166,8 @@ enum { PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ PORT_CMD_ESP = (1 << 21), /* External Sata Port */ + PORT_CMD_CPD = (1 << 20), /* Cold Presence Detection */ + PORT_CMD_MPSP = (1 << 19), /* Mechanical Presence Switch */ PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */ PORT_CMD_PMP = (1 << 17), /* PMP attached */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ @@ -182,6 +183,10 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + /* PORT_CMD capabilities mask */ + PORT_CMD_CAP = PORT_CMD_HPCP | PORT_CMD_MPSP | + PORT_CMD_CPD | PORT_CMD_ESP | PORT_CMD_FBSCP, + /* PORT_FBS bits */ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ @@ -323,7 +328,6 @@ struct ahci_port_priv { struct ahci_host_priv { /* Input fields */ unsigned int flags; /* AHCI_HFLAG_* */ - u32 force_port_map; /* force port map */ u32 mask_port_map; /* mask out particular bits */ void __iomem * mmio; /* bus-independent mem map */ @@ -334,12 +338,15 @@ struct ahci_host_priv { u32 saved_cap; /* saved initial cap */ u32 saved_cap2; /* saved initial cap2 */ u32 saved_port_map; /* saved initial port_map */ + u32 saved_port_cap[AHCI_MAX_PORTS]; /* saved port_cap */ u32 em_loc; /* enclosure management location */ u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ u32 remapped_nvme; /* NVMe remapped device count */ bool got_runtime_pm; /* Did we do pm_runtime_get? */ - struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ + unsigned int n_clks; + struct clk_bulk_data *clks; /* Optional */ + unsigned int f_rsts; struct reset_control *rsts; /* Optional */ struct regulator **target_pwrs; /* Optional */ struct regulator *ahci_regulator;/* Optional */ @@ -426,10 +433,9 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht); void ahci_error_handler(struct ata_port *ap); u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked); -static inline void __iomem *__ahci_port_base(struct ata_host *host, +static inline void __iomem *__ahci_port_base(struct ahci_host_priv *hpriv, unsigned int port_no) { - struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; return mmio + 0x100 + (port_no * 0x80); @@ -437,7 +443,9 @@ static inline void __iomem *__ahci_port_base(struct ata_host *host, static inline void __iomem *ahci_port_base(struct ata_port *ap) { - return __ahci_port_base(ap->host, ap->port_no); + struct ahci_host_priv *hpriv = ap->host->private_data; + + return __ahci_port_base(hpriv, ap->port_no); } static inline int ahci_nr_ports(u32 cap) diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c index 052c28e250aa..dc8a019b8340 100644 --- a/drivers/ata/ahci_da850.c +++ b/drivers/ata/ahci_da850.c @@ -163,7 +163,6 @@ static int ahci_da850_probe(struct platform_device *pdev) struct ahci_host_priv *hpriv; void __iomem *pwrdn_reg; struct resource *res; - struct clk *clk; u32 mpy; int rc; @@ -172,36 +171,28 @@ static int ahci_da850_probe(struct platform_device *pdev) return PTR_ERR(hpriv); /* - * Internally ahci_platform_get_resources() calls clk_get(dev, NULL) - * when trying to obtain the functional clock. This SATA controller - * uses two clocks for which we specify two connection ids. If we don't - * have the functional clock at this point - call clk_get() again with - * con_id = "fck". + * Internally ahci_platform_get_resources() calls the bulk clocks + * get method or falls back to using a single clk_get_optional(). + * This AHCI SATA controller uses two clocks: functional clock + * with "fck" connection id and external reference clock with + * "refclk" id. If we haven't got all of them re-try the clocks + * getting procedure with the explicitly specified ids. */ - if (!hpriv->clks[0]) { - clk = clk_get(dev, "fck"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - hpriv->clks[0] = clk; - } - - /* - * The second clock used by ahci-da850 is the external REFCLK. If we - * didn't get it from ahci_platform_get_resources(), let's try to - * specify the con_id in clk_get(). - */ - if (!hpriv->clks[1]) { - clk = clk_get(dev, "refclk"); - if (IS_ERR(clk)) { - dev_err(dev, "unable to obtain the reference clock"); - return -ENODEV; - } - - hpriv->clks[1] = clk; + if (hpriv->n_clks < 2) { + hpriv->clks = devm_kcalloc(dev, 2, sizeof(*hpriv->clks), GFP_KERNEL); + if (!hpriv->clks) + return -ENOMEM; + + hpriv->clks[0].id = "fck"; + hpriv->clks[1].id = "refclk"; + hpriv->n_clks = 2; + + rc = devm_clk_bulk_get(dev, hpriv->n_clks, hpriv->clks); + if (rc) + return rc; } - mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1])); + mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1].clk)); if (mpy == 0) { dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy); return -EINVAL; diff --git a/drivers/ata/ahci_dm816.c b/drivers/ata/ahci_dm816.c index 8a92112dcd59..d26efcd20f64 100644 --- a/drivers/ata/ahci_dm816.c +++ b/drivers/ata/ahci_dm816.c @@ -69,12 +69,12 @@ static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev) * keep-alive clock and the external reference clock. We need the * rate of the latter to calculate the correct value of MPY bits. */ - if (!hpriv->clks[1]) { + if (hpriv->n_clks < 2) { dev_err(dev, "reference clock not supplied\n"); return -EINVAL; } - refclk_rate = clk_get_rate(hpriv->clks[1]); + refclk_rate = clk_get_rate(hpriv->clks[1].clk); if ((refclk_rate % 100) != 0) { dev_err(dev, "reference clock rate must be divisible by 100\n"); return -EINVAL; diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c new file mode 100644 index 000000000000..8fb66860db31 --- /dev/null +++ b/drivers/ata/ahci_dwc.c @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DWC AHCI SATA Platform driver + * + * Copyright (C) 2021 BAIKAL ELECTRONICS, JSC + */ + +#include <linux/ahci_platform.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/libata.h> +#include <linux/log2.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/regmap.h> + +#include "ahci.h" + +#define DRV_NAME "ahci-dwc" + +#define AHCI_DWC_FBS_PMPN_MAX 15 + +/* DWC AHCI SATA controller specific registers */ +#define AHCI_DWC_HOST_OOBR 0xbc +#define AHCI_DWC_HOST_OOB_WE BIT(31) +#define AHCI_DWC_HOST_CWMIN_MASK GENMASK(30, 24) +#define AHCI_DWC_HOST_CWMAX_MASK GENMASK(23, 16) +#define AHCI_DWC_HOST_CIMIN_MASK GENMASK(15, 8) +#define AHCI_DWC_HOST_CIMAX_MASK GENMASK(7, 0) + +#define AHCI_DWC_HOST_GPCR 0xd0 +#define AHCI_DWC_HOST_GPSR 0xd4 + +#define AHCI_DWC_HOST_TIMER1MS 0xe0 +#define AHCI_DWC_HOST_TIMV_MASK GENMASK(19, 0) + +#define AHCI_DWC_HOST_GPARAM1R 0xe8 +#define AHCI_DWC_HOST_ALIGN_M BIT(31) +#define AHCI_DWC_HOST_RX_BUFFER BIT(30) +#define AHCI_DWC_HOST_PHY_DATA_MASK GENMASK(29, 28) +#define AHCI_DWC_HOST_PHY_RST BIT(27) +#define AHCI_DWC_HOST_PHY_CTRL_MASK GENMASK(26, 21) +#define AHCI_DWC_HOST_PHY_STAT_MASK GENMASK(20, 15) +#define AHCI_DWC_HOST_LATCH_M BIT(14) +#define AHCI_DWC_HOST_PHY_TYPE_MASK GENMASK(13, 11) +#define AHCI_DWC_HOST_RET_ERR BIT(10) +#define AHCI_DWC_HOST_AHB_ENDIAN_MASK GENMASK(9, 8) +#define AHCI_DWC_HOST_S_HADDR BIT(7) +#define AHCI_DWC_HOST_M_HADDR BIT(6) +#define AHCI_DWC_HOST_S_HDATA_MASK GENMASK(5, 3) +#define AHCI_DWC_HOST_M_HDATA_MASK GENMASK(2, 0) + +#define AHCI_DWC_HOST_GPARAM2R 0xec +#define AHCI_DWC_HOST_FBS_MEM_S BIT(19) +#define AHCI_DWC_HOST_FBS_PMPN_MASK GENMASK(17, 16) +#define AHCI_DWC_HOST_FBS_SUP BIT(15) +#define AHCI_DWC_HOST_DEV_CP BIT(14) +#define AHCI_DWC_HOST_DEV_MP BIT(13) +#define AHCI_DWC_HOST_ENCODE_M BIT(12) +#define AHCI_DWC_HOST_RXOOB_CLK_M BIT(11) +#define AHCI_DWC_HOST_RXOOB_M BIT(10) +#define AHCI_DWC_HOST_TXOOB_M BIT(9) +#define AHCI_DWC_HOST_RXOOB_M BIT(10) +#define AHCI_DWC_HOST_RXOOB_CLK_MASK GENMASK(8, 0) + +#define AHCI_DWC_HOST_PPARAMR 0xf0 +#define AHCI_DWC_HOST_TX_MEM_M BIT(11) +#define AHCI_DWC_HOST_TX_MEM_S BIT(10) +#define AHCI_DWC_HOST_RX_MEM_M BIT(9) +#define AHCI_DWC_HOST_RX_MEM_S BIT(8) +#define AHCI_DWC_HOST_TXFIFO_DEPTH GENMASK(7, 4) +#define AHCI_DWC_HOST_RXFIFO_DEPTH GENMASK(3, 0) + +#define AHCI_DWC_HOST_TESTR 0xf4 +#define AHCI_DWC_HOST_PSEL_MASK GENMASK(18, 16) +#define AHCI_DWC_HOST_TEST_IF BIT(0) + +#define AHCI_DWC_HOST_VERSIONR 0xf8 +#define AHCI_DWC_HOST_IDR 0xfc + +#define AHCI_DWC_PORT_DMACR 0x70 +#define AHCI_DWC_PORT_RXABL_MASK GENMASK(15, 12) +#define AHCI_DWC_PORT_TXABL_MASK GENMASK(11, 8) +#define AHCI_DWC_PORT_RXTS_MASK GENMASK(7, 4) +#define AHCI_DWC_PORT_TXTS_MASK GENMASK(3, 0) +#define AHCI_DWC_PORT_PHYCR 0x74 +#define AHCI_DWC_PORT_PHYSR 0x78 + +/* Baikal-T1 AHCI SATA specific registers */ +#define AHCI_BT1_HOST_PHYCR AHCI_DWC_HOST_GPCR +#define AHCI_BT1_HOST_MPLM_MASK GENMASK(29, 23) +#define AHCI_BT1_HOST_LOSDT_MASK GENMASK(22, 20) +#define AHCI_BT1_HOST_CRR BIT(19) +#define AHCI_BT1_HOST_CRW BIT(18) +#define AHCI_BT1_HOST_CRCD BIT(17) +#define AHCI_BT1_HOST_CRCA BIT(16) +#define AHCI_BT1_HOST_CRDI_MASK GENMASK(15, 0) + +#define AHCI_BT1_HOST_PHYSR AHCI_DWC_HOST_GPSR +#define AHCI_BT1_HOST_CRA BIT(16) +#define AHCI_BT1_HOST_CRDO_MASK GENMASK(15, 0) + +struct ahci_dwc_plat_data { + unsigned int pflags; + unsigned int hflags; + int (*init)(struct ahci_host_priv *hpriv); + int (*reinit)(struct ahci_host_priv *hpriv); + void (*clear)(struct ahci_host_priv *hpriv); +}; + +struct ahci_dwc_host_priv { + const struct ahci_dwc_plat_data *pdata; + struct platform_device *pdev; + + u32 timv; + u32 dmacr[AHCI_MAX_PORTS]; +}; + +static int ahci_bt1_init(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + int ret; + + /* APB, application and reference clocks are required */ + if (!ahci_platform_find_clk(hpriv, "pclk") || + !ahci_platform_find_clk(hpriv, "aclk") || + !ahci_platform_find_clk(hpriv, "ref")) { + dev_err(&dpriv->pdev->dev, "No system clocks specified\n"); + return -EINVAL; + } + + /* + * Fully reset the SATA AXI and ref clocks domain to ensure the state + * machine is working from scratch especially if the reference clocks + * source has been changed. + */ + ret = ahci_platform_assert_rsts(hpriv); + if (ret) { + dev_err(&dpriv->pdev->dev, "Couldn't assert the resets\n"); + return ret; + } + + ret = ahci_platform_deassert_rsts(hpriv); + if (ret) { + dev_err(&dpriv->pdev->dev, "Couldn't de-assert the resets\n"); + return ret; + } + + return 0; +} + +static struct ahci_host_priv *ahci_dwc_get_resources(struct platform_device *pdev) +{ + struct ahci_dwc_host_priv *dpriv; + struct ahci_host_priv *hpriv; + + dpriv = devm_kzalloc(&pdev->dev, sizeof(*dpriv), GFP_KERNEL); + if (!dpriv) + return ERR_PTR(-ENOMEM); + + dpriv->pdev = pdev; + dpriv->pdata = device_get_match_data(&pdev->dev); + if (!dpriv->pdata) + return ERR_PTR(-EINVAL); + + hpriv = ahci_platform_get_resources(pdev, dpriv->pdata->pflags); + if (IS_ERR(hpriv)) + return hpriv; + + hpriv->flags |= dpriv->pdata->hflags; + hpriv->plat_data = (void *)dpriv; + + return hpriv; +} + +static void ahci_dwc_check_cap(struct ahci_host_priv *hpriv) +{ + unsigned long port_map = hpriv->saved_port_map | hpriv->mask_port_map; + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + bool dev_mp, dev_cp, fbs_sup; + unsigned int fbs_pmp; + u32 param; + int i; + + param = readl(hpriv->mmio + AHCI_DWC_HOST_GPARAM2R); + dev_mp = !!(param & AHCI_DWC_HOST_DEV_MP); + dev_cp = !!(param & AHCI_DWC_HOST_DEV_CP); + fbs_sup = !!(param & AHCI_DWC_HOST_FBS_SUP); + fbs_pmp = 5 * FIELD_GET(AHCI_DWC_HOST_FBS_PMPN_MASK, param); + + if (!dev_mp && hpriv->saved_cap & HOST_CAP_MPS) { + dev_warn(&dpriv->pdev->dev, "MPS is unsupported\n"); + hpriv->saved_cap &= ~HOST_CAP_MPS; + } + + + if (fbs_sup && fbs_pmp < AHCI_DWC_FBS_PMPN_MAX) { + dev_warn(&dpriv->pdev->dev, "PMPn is limited up to %u ports\n", + fbs_pmp); + } + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + if (!dev_mp && hpriv->saved_port_cap[i] & PORT_CMD_MPSP) { + dev_warn(&dpriv->pdev->dev, "MPS incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_MPSP; + } + + if (!dev_cp && hpriv->saved_port_cap[i] & PORT_CMD_CPD) { + dev_warn(&dpriv->pdev->dev, "CPD incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_CPD; + } + + if (!fbs_sup && hpriv->saved_port_cap[i] & PORT_CMD_FBSCP) { + dev_warn(&dpriv->pdev->dev, "FBS incapable port %d\n", i); + hpriv->saved_port_cap[i] &= ~PORT_CMD_FBSCP; + } + } +} + +static void ahci_dwc_init_timer(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + unsigned long rate; + struct clk *aclk; + u32 cap, cap2; + + /* 1ms tick is generated only for the CCC or DevSleep features */ + cap = readl(hpriv->mmio + HOST_CAP); + cap2 = readl(hpriv->mmio + HOST_CAP2); + if (!(cap & HOST_CAP_CCC) && !(cap2 & HOST_CAP2_SDS)) + return; + + /* + * Tick is generated based on the AXI/AHB application clocks signal + * so we need to be sure in the clock we are going to use. + */ + aclk = ahci_platform_find_clk(hpriv, "aclk"); + if (!aclk) + return; + + /* 1ms timer interval is set as TIMV = AMBA_FREQ[MHZ] * 1000 */ + dpriv->timv = readl(hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); + dpriv->timv = FIELD_GET(AHCI_DWC_HOST_TIMV_MASK, dpriv->timv); + rate = clk_get_rate(aclk) / 1000UL; + if (rate == dpriv->timv) + return; + + dev_info(&dpriv->pdev->dev, "Update CCC/DevSlp timer for Fapp %lu MHz\n", + rate / 1000UL); + dpriv->timv = FIELD_PREP(AHCI_DWC_HOST_TIMV_MASK, rate); + writel(dpriv->timv, hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); +} + +static int ahci_dwc_init_dmacr(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + struct device_node *child; + void __iomem *port_mmio; + u32 port, dmacr, ts; + + /* + * Update the DMA Tx/Rx transaction sizes in accordance with the + * platform setup. Note values exceeding maximal or minimal limits will + * be automatically clamped. Also note the register isn't affected by + * the HBA global reset so we can freely initialize it once until the + * next system reset. + */ + for_each_child_of_node(dpriv->pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + port_mmio = __ahci_port_base(hpriv, port); + dmacr = readl(port_mmio + AHCI_DWC_PORT_DMACR); + + if (!of_property_read_u32(child, "snps,tx-ts-max", &ts)) { + ts = ilog2(ts); + dmacr &= ~AHCI_DWC_PORT_TXTS_MASK; + dmacr |= FIELD_PREP(AHCI_DWC_PORT_TXTS_MASK, ts); + } + + if (!of_property_read_u32(child, "snps,rx-ts-max", &ts)) { + ts = ilog2(ts); + dmacr &= ~AHCI_DWC_PORT_RXTS_MASK; + dmacr |= FIELD_PREP(AHCI_DWC_PORT_RXTS_MASK, ts); + } + + writel(dmacr, port_mmio + AHCI_DWC_PORT_DMACR); + dpriv->dmacr[port] = dmacr; + } + + return 0; +} + +static int ahci_dwc_init_host(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + int rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + if (dpriv->pdata->init) { + rc = dpriv->pdata->init(hpriv); + if (rc) + goto err_disable_resources; + } + + ahci_dwc_check_cap(hpriv); + + ahci_dwc_init_timer(hpriv); + + rc = ahci_dwc_init_dmacr(hpriv); + if (rc) + goto err_clear_platform; + + return 0; + +err_clear_platform: + if (dpriv->pdata->clear) + dpriv->pdata->clear(hpriv); + +err_disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +static int ahci_dwc_reinit_host(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + unsigned long port_map = hpriv->port_map; + void __iomem *port_mmio; + int i, rc; + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + if (dpriv->pdata->reinit) { + rc = dpriv->pdata->reinit(hpriv); + if (rc) + goto err_disable_resources; + } + + writel(dpriv->timv, hpriv->mmio + AHCI_DWC_HOST_TIMER1MS); + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + port_mmio = __ahci_port_base(hpriv, i); + writel(dpriv->dmacr[i], port_mmio + AHCI_DWC_PORT_DMACR); + } + + return 0; + +err_disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +static void ahci_dwc_clear_host(struct ahci_host_priv *hpriv) +{ + struct ahci_dwc_host_priv *dpriv = hpriv->plat_data; + + if (dpriv->pdata->clear) + dpriv->pdata->clear(hpriv); + + ahci_platform_disable_resources(hpriv); +} + +static void ahci_dwc_stop_host(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + ahci_dwc_clear_host(hpriv); +} + +static struct ata_port_operations ahci_dwc_port_ops = { + .inherits = &ahci_platform_ops, + .host_stop = ahci_dwc_stop_host, +}; + +static const struct ata_port_info ahci_dwc_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_dwc_port_ops, +}; + +static struct scsi_host_template ahci_dwc_scsi_info = { + AHCI_SHT(DRV_NAME), +}; + +static int ahci_dwc_probe(struct platform_device *pdev) +{ + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_dwc_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_dwc_init_host(hpriv); + if (rc) + return rc; + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_dwc_port_info, + &ahci_dwc_scsi_info); + if (rc) + goto err_clear_host; + + return 0; + +err_clear_host: + ahci_dwc_clear_host(hpriv); + + return rc; +} + +static int ahci_dwc_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_platform_suspend_host(dev); + if (rc) + return rc; + + ahci_dwc_clear_host(hpriv); + + return 0; +} + +static int ahci_dwc_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int rc; + + rc = ahci_dwc_reinit_host(hpriv); + if (rc) + return rc; + + return ahci_platform_resume_host(dev); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ahci_dwc_pm_ops, ahci_dwc_suspend, + ahci_dwc_resume); + +static struct ahci_dwc_plat_data ahci_dwc_plat = { + .pflags = AHCI_PLATFORM_GET_RESETS, +}; + +static struct ahci_dwc_plat_data ahci_bt1_plat = { + .pflags = AHCI_PLATFORM_GET_RESETS | AHCI_PLATFORM_RST_TRIGGER, + .init = ahci_bt1_init, +}; + +static const struct of_device_id ahci_dwc_of_match[] = { + { .compatible = "snps,dwc-ahci", &ahci_dwc_plat }, + { .compatible = "snps,spear-ahci", &ahci_dwc_plat }, + { .compatible = "baikal,bt1-ahci", &ahci_bt1_plat }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_dwc_of_match); + +static struct platform_driver ahci_dwc_driver = { + .probe = ahci_dwc_probe, + .remove = ata_platform_remove_one, + .shutdown = ahci_platform_shutdown, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_dwc_of_match, + .pm = &ahci_dwc_pm_ops, + }, +}; +module_platform_driver(ahci_dwc_driver); + +MODULE_DESCRIPTION("DWC AHCI SATA platform driver"); +MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c index 1f6c85fde983..c056378e3e72 100644 --- a/drivers/ata/ahci_mtk.c +++ b/drivers/ata/ahci_mtk.c @@ -118,8 +118,6 @@ static int mtk_ahci_parse_property(struct ahci_host_priv *hpriv, SYS_CFG_SATA_EN); } - of_property_read_u32(np, "ports-implemented", &hpriv->force_port_map); - return 0; } diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 28a8de5b48b9..8f5572a9f8f1 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -56,9 +56,6 @@ static int ahci_probe(struct platform_device *pdev) if (rc) return rc; - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->force_port_map); - if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; @@ -83,9 +80,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, static const struct of_device_id ahci_of_match[] = { { .compatible = "generic-ahci", }, /* Keep the following compatibles for device tree compatibility */ - { .compatible = "snps,spear-ahci", }, { .compatible = "ibm,476gtr-ahci", }, - { .compatible = "snps,dwc-ahci", }, { .compatible = "hisilicon,hisi-ahci", }, { .compatible = "cavium,octeon-7130-ahci", }, { /* sentinel */ } diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index 7526653c843b..5a2cac60a29a 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -144,7 +144,6 @@ static struct scsi_host_template ahci_platform_sht = { static int st_ahci_probe(struct platform_device *pdev) { - struct device *dev = &pdev->dev; struct st_ahci_drv_data *drv_data; struct ahci_host_priv *hpriv; int err; @@ -168,9 +167,6 @@ static int st_ahci_probe(struct platform_device *pdev) st_ahci_configure_oob(hpriv->mmio); - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->force_port_map); - err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); if (err) { diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index cf8c7fd59ada..954386a2b500 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -16,6 +16,7 @@ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf */ +#include <linux/bitops.h> #include <linux/kernel.h> #include <linux/gfp.h> #include <linux/module.h> @@ -443,17 +444,28 @@ static ssize_t ahci_show_em_supported(struct device *dev, void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) { void __iomem *mmio = hpriv->mmio; - u32 cap, cap2, vers, port_map; + void __iomem *port_mmio; + unsigned long port_map; + u32 cap, cap2, vers; int i; /* make sure AHCI mode is enabled before accessing CAP */ ahci_enable_ahci(mmio); - /* Values prefixed with saved_ are written back to host after - * reset. Values without are used for driver operation. + /* + * Values prefixed with saved_ are written back to the HBA and ports + * registers after reset. Values without are used for driver operation. + */ + + /* + * Override HW-init HBA capability fields with the platform-specific + * values. The rest of the HBA capabilities are defined as Read-only + * and can't be modified in CSR anyway. */ - hpriv->saved_cap = cap = readl(mmio + HOST_CAP); - hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); + cap = readl(mmio + HOST_CAP); + if (hpriv->saved_cap) + cap = (cap & ~(HOST_CAP_SSS | HOST_CAP_MPS)) | hpriv->saved_cap; + hpriv->saved_cap = cap; /* CAP2 register is only defined for AHCI 1.2 and later */ vers = readl(mmio + HOST_VERSION); @@ -517,15 +529,18 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) cap &= ~HOST_CAP_SXS; } - if (hpriv->force_port_map && port_map != hpriv->force_port_map) { - dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", - port_map, hpriv->force_port_map); - port_map = hpriv->force_port_map; + /* Override the HBA ports mapping if the platform needs it */ + port_map = readl(mmio + HOST_PORTS_IMPL); + if (hpriv->saved_port_map && port_map != hpriv->saved_port_map) { + dev_info(dev, "forcing port_map 0x%lx -> 0x%x\n", + port_map, hpriv->saved_port_map); + port_map = hpriv->saved_port_map; + } else { hpriv->saved_port_map = port_map; } if (hpriv->mask_port_map) { - dev_warn(dev, "masking port_map 0x%x -> 0x%x\n", + dev_warn(dev, "masking port_map 0x%lx -> 0x%lx\n", port_map, port_map & hpriv->mask_port_map); port_map &= hpriv->mask_port_map; @@ -544,7 +559,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) */ if (map_ports > ahci_nr_ports(cap)) { dev_warn(dev, - "implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n", + "implemented port map (0x%lx) contains more ports than nr_ports (%u), using nr_ports\n", port_map, ahci_nr_ports(cap)); port_map = 0; } @@ -553,16 +568,30 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* fabricate port_map from cap.nr_ports for < AHCI 1.3 */ if (!port_map && vers < 0x10300) { port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); + dev_warn(dev, "forcing PORTS_IMPL to 0x%lx\n", port_map); /* write the fixed up value to the PI register */ hpriv->saved_port_map = port_map; } + /* + * Preserve the ports capabilities defined by the platform. Note there + * is no need in storing the rest of the P#.CMD fields since they are + * volatile. + */ + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + if (hpriv->saved_port_cap[i]) + continue; + + port_mmio = __ahci_port_base(hpriv, i); + hpriv->saved_port_cap[i] = + readl(port_mmio + PORT_CMD) & PORT_CMD_CAP; + } + /* record values to use during operation */ hpriv->cap = cap; hpriv->cap2 = cap2; - hpriv->version = readl(mmio + HOST_VERSION); + hpriv->version = vers; hpriv->port_map = port_map; if (!hpriv->start_engine) @@ -588,13 +617,21 @@ EXPORT_SYMBOL_GPL(ahci_save_initial_config); static void ahci_restore_initial_config(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + unsigned long port_map = hpriv->port_map; void __iomem *mmio = hpriv->mmio; + void __iomem *port_mmio; + int i; writel(hpriv->saved_cap, mmio + HOST_CAP); if (hpriv->saved_cap2) writel(hpriv->saved_cap2, mmio + HOST_CAP2); writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + port_mmio = __ahci_port_base(hpriv, i); + writel(hpriv->saved_port_cap[i], port_mmio + PORT_CMD); + } } static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 32495ae96567..ddf17e2d266c 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -94,31 +94,41 @@ void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); /** - * ahci_platform_enable_clks - Enable platform clocks + * ahci_platform_find_clk - Find platform clock * @hpriv: host private area to store config values + * @con_id: clock connection ID * - * This function enables all the clks found in hpriv->clks, starting at - * index 0. If any clk fails to enable it disables all the clks already - * enabled in reverse order, and then returns an error. + * This function returns a pointer to the clock descriptor of the clock with + * the passed ID. * * RETURNS: - * 0 on success otherwise a negative error code + * Pointer to the clock descriptor on success otherwise NULL */ -int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) +struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, const char *con_id) { - int c, rc; + int i; - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { - rc = clk_prepare_enable(hpriv->clks[c]); - if (rc) - goto disable_unprepare_clk; + for (i = 0; i < hpriv->n_clks; i++) { + if (!strcmp(hpriv->clks[i].id, con_id)) + return hpriv->clks[i].clk; } - return 0; -disable_unprepare_clk: - while (--c >= 0) - clk_disable_unprepare(hpriv->clks[c]); - return rc; + return NULL; +} +EXPORT_SYMBOL_GPL(ahci_platform_find_clk); + +/** + * ahci_platform_enable_clks - Enable platform clocks + * @hpriv: host private area to store config values + * + * This function enables all the clks found for the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) +{ + return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); @@ -126,20 +136,55 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); * ahci_platform_disable_clks - Disable platform clocks * @hpriv: host private area to store config values * - * This function disables all the clks found in hpriv->clks, in reverse - * order of ahci_platform_enable_clks (starting at the end of the array). + * This function disables all the clocks enabled before + * (bulk-clocks-disable function is supposed to do that in reverse + * from the enabling procedure order). */ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) { - int c; - - for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) - if (hpriv->clks[c]) - clk_disable_unprepare(hpriv->clks[c]); + clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); /** + * ahci_platform_deassert_rsts - Deassert/trigger platform resets + * @hpriv: host private area to store config values + * + * This function deasserts or triggers all the reset lines found for + * the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_reset(hpriv->rsts); + + return reset_control_deassert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_deassert_rsts); + +/** + * ahci_platform_assert_rsts - Assert/rearm platform resets + * @hpriv: host private area to store config values + * + * This function asserts or rearms (for self-deasserting resets) all + * the reset controls found for the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_rearm(hpriv->rsts); + + return reset_control_assert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_assert_rsts); + +/** * ahci_platform_enable_regulators - Enable regulators * @hpriv: host private area to store config values * @@ -236,18 +281,18 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) if (rc) goto disable_regulator; - rc = reset_control_deassert(hpriv->rsts); + rc = ahci_platform_deassert_rsts(hpriv); if (rc) goto disable_clks; rc = ahci_platform_enable_phys(hpriv); if (rc) - goto disable_resets; + goto disable_rsts; return 0; -disable_resets: - reset_control_assert(hpriv->rsts); +disable_rsts: + ahci_platform_assert_rsts(hpriv); disable_clks: ahci_platform_disable_clks(hpriv); @@ -274,7 +319,7 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { ahci_platform_disable_phys(hpriv); - reset_control_assert(hpriv->rsts); + ahci_platform_assert_rsts(hpriv); ahci_platform_disable_clks(hpriv); @@ -292,8 +337,6 @@ static void ahci_platform_put_resources(struct device *dev, void *res) pm_runtime_disable(dev); } - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) - clk_put(hpriv->clks[c]); /* * The regulators are tied to child node device and not to the * SATA device itself. So we can't use devm for automatically @@ -363,6 +406,34 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, return rc; } +static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct device_node *child; + u32 port; + + if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap)) + hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS); + + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->saved_port_map); + + for_each_child_of_node(dev->of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port])) + hpriv->saved_port_cap[port] &= PORT_CMD_CAP; + } + + return 0; +} + /** * ahci_platform_get_resources - Get platform resources * @pdev: platform device to get resources for @@ -374,8 +445,8 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, * 1) mmio registers (IORESOURCE_MEM 0, mandatory) * 2) regulator for controlling the targets power (optional) * regulator for controlling the AHCI controller (optional) - * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, - * or for non devicetree enabled platforms a single clock + * 3) all clocks specified in the devicetree node, or a single + * clock for non-OF platforms (optional) * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional) * 5) phys (optional) * @@ -385,11 +456,10 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, unsigned int flags) { + int child_nodes, rc = -ENOMEM, enabled_ports = 0; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; - struct clk *clk; struct device_node *child; - int i, enabled_ports = 0, rc = -ENOMEM, child_nodes; u32 mask_port_map = 0; if (!devres_open_group(dev, NULL, GFP_KERNEL)) @@ -402,32 +472,51 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, devres_add(dev, hpriv); - hpriv->mmio = devm_ioremap_resource(dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); + /* + * If the DT provided an "ahci" named resource, use it. Otherwise, + * fallback to using the default first resource for the device node. + */ + if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci")) + hpriv->mmio = devm_platform_ioremap_resource_byname(pdev, "ahci"); + else + hpriv->mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hpriv->mmio)) { rc = PTR_ERR(hpriv->mmio); goto err_out; } - for (i = 0; i < AHCI_MAX_CLKS; i++) { + /* + * Bulk clocks getting procedure can fail to find any clock due to + * running on a non-OF platform or due to the clocks being defined in + * bypass of the DT firmware (like da850, spear13xx). In that case we + * fallback to getting a single clock source right from the dev clocks + * list. + */ + rc = devm_clk_bulk_get_all(dev, &hpriv->clks); + if (rc < 0) + goto err_out; + + if (rc > 0) { + /* Got clocks in bulk */ + hpriv->n_clks = rc; + } else { /* - * For now we must use clk_get(dev, NULL) for the first clock, - * because some platforms (da850, spear13xx) are not yet - * converted to use devicetree for clocks. For new platforms - * this is equivalent to of_clk_get(dev->of_node, 0). + * No clock bulk found: fallback to manually getting + * the optional clock. */ - if (i == 0) - clk = clk_get(dev, NULL); - else - clk = of_clk_get(dev->of_node, i); - - if (IS_ERR(clk)) { - rc = PTR_ERR(clk); - if (rc == -EPROBE_DEFER) - goto err_out; - break; + hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL); + if (!hpriv->clks) { + rc = -ENOMEM; + goto err_out; + } + hpriv->clks->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(hpriv->clks->clk)) { + rc = PTR_ERR(hpriv->clks->clk); + goto err_out; + } else if (hpriv->clks->clk) { + hpriv->clks->id = "ahci"; + hpriv->n_clks = 1; } - hpriv->clks[i] = clk; } hpriv->ahci_regulator = devm_regulator_get(dev, "ahci"); @@ -449,16 +538,28 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, rc = PTR_ERR(hpriv->rsts); goto err_out; } + + hpriv->f_rsts = flags & AHCI_PLATFORM_RST_TRIGGER; } - hpriv->nports = child_nodes = of_get_child_count(dev->of_node); + /* + * Too many sub-nodes most likely means having something wrong with + * the firmware. + */ + child_nodes = of_get_child_count(dev->of_node); + if (child_nodes > AHCI_MAX_PORTS) { + rc = -EINVAL; + goto err_out; + } /* * If no sub-node was found, we still need to set nports to * one in order to be able to use the * ahci_platform_[en|dis]able_[phys|regulators] functions. */ - if (!child_nodes) + if (child_nodes) + hpriv->nports = child_nodes; + else hpriv->nports = 1; hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL); @@ -540,6 +641,15 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, if (rc == -EPROBE_DEFER) goto err_out; } + + /* + * Retrieve firmware-specific flags which then will be used to set + * the HW-init fields of HBA and its ports + */ + rc = ahci_platform_get_firmware(hpriv, dev); + if (rc) + goto err_out; + pm_runtime_enable(dev); pm_runtime_get_sync(dev); hpriv->got_runtime_pm = true; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c9a9aa607b62..d3ce5c383f3a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -665,33 +665,33 @@ u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev) /** * ata_build_rw_tf - Build ATA taskfile for given read/write request - * @tf: Target ATA taskfile - * @dev: ATA device @tf belongs to + * @qc: Metadata associated with the taskfile to build * @block: Block address * @n_block: Number of blocks * @tf_flags: RW/FUA etc... - * @tag: tag * @class: IO priority class * * LOCKING: * None. * - * Build ATA taskfile @tf for read/write request described by - * @block, @n_block, @tf_flags and @tag on @dev. + * Build ATA taskfile for the command @qc for read/write request described + * by @block, @n_block, @tf_flags and @class. * * RETURNS: * * 0 on success, -ERANGE if the request is too large for @dev, * -EINVAL if the request is invalid. */ -int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, - u64 block, u32 n_block, unsigned int tf_flags, - unsigned int tag, int class) +int ata_build_rw_tf(struct ata_queued_cmd *qc, u64 block, u32 n_block, + unsigned int tf_flags, int class) { + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->flags |= tf_flags; - if (ata_ncq_enabled(dev) && !ata_tag_internal(tag)) { + if (ata_ncq_enabled(dev)) { /* yay, NCQ */ if (!lba_48_ok(block, n_block)) return -ERANGE; @@ -704,7 +704,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, else tf->command = ATA_CMD_FPDMA_READ; - tf->nsect = tag << 3; + tf->nsect = qc->hw_tag << 3; tf->hob_feature = (n_block >> 8) & 0xff; tf->feature = n_block & 0xff; @@ -719,7 +719,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, if (tf->flags & ATA_TFLAG_FUA) tf->device |= 1 << 7; - if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE && + if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED && class == IOPRIO_CLASS_RT) tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO; } else if (dev->flags & ATA_DFLAG_LBA) { @@ -1578,8 +1578,8 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev, else ata_qc_complete(qc); - ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n", - command); + ata_dev_warn(dev, "qc timeout after %u msecs (cmd 0x%x)\n", + timeout, command); } spin_unlock_irqrestore(ap->lock, flags); @@ -2171,7 +2171,7 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev) return; not_supported: - dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE; + dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLED; dev->flags &= ~ATA_DFLAG_NCQ_PRIO; } @@ -3021,7 +3021,8 @@ static void sata_print_link_status(struct ata_link *link) if (sata_scr_read(link, SCR_STATUS, &sstatus)) return; - sata_scr_read(link, SCR_CONTROL, &scontrol); + if (sata_scr_read(link, SCR_CONTROL, &scontrol)) + return; if (ata_phys_link_online(link)) { tmp = (sstatus >> 4) & 0xf; @@ -4299,7 +4300,6 @@ static void ata_dev_xfermask(struct ata_device *dev) static unsigned int ata_dev_set_xfermode(struct ata_device *dev) { struct ata_taskfile tf; - unsigned int err_mask; /* set up set-features taskfile */ ata_dev_dbg(dev, "set features - xfer mode\n"); @@ -4321,20 +4321,20 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) else /* In the ancient relic department - skip all of this */ return 0; - /* On some disks, this command causes spin-up, so we need longer timeout */ - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000); - - return err_mask; + /* + * On some disks, this command causes spin-up, so we need longer + * timeout. + */ + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000); } /** - * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES + * ata_dev_set_feature - Issue SET FEATURES * @dev: Device to which command will be sent - * @enable: Whether to enable or disable the feature - * @feature: The sector count represents the feature to set + * @subcmd: The SET FEATURES subcommand to be sent + * @action: The sector count represents a subcommand specific action * - * Issue SET FEATURES - SATA FEATURES command to device @dev - * on port @ap with sector count + * Issue SET FEATURES command to device @dev on port @ap with sector count * * LOCKING: * PCI/etc. bus probe sem. @@ -4342,28 +4342,26 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 subcmd, u8 action) { struct ata_taskfile tf; - unsigned int err_mask; unsigned int timeout = 0; /* set up set-features taskfile */ - ata_dev_dbg(dev, "set features - SATA features\n"); + ata_dev_dbg(dev, "set features\n"); ata_tf_init(dev, &tf); tf.command = ATA_CMD_SET_FEATURES; - tf.feature = enable; + tf.feature = subcmd; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - tf.nsect = feature; + tf.nsect = action; - if (enable == SETFEATURES_SPINUP) + if (subcmd == SETFEATURES_SPINUP) timeout = ata_probe_timeout ? ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout); - return err_mask; + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout); } EXPORT_SYMBOL_GPL(ata_dev_set_feature); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7c128c89b454..08e11bc312c2 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -151,6 +151,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { #undef CMDS static void __ata_port_freeze(struct ata_port *ap); +static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + struct ata_device **r_failed_dev); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); static void ata_eh_handle_port_resume(struct ata_port *ap); @@ -1086,14 +1088,11 @@ static void __ata_port_freeze(struct ata_port *ap) */ int ata_port_freeze(struct ata_port *ap) { - int nr_aborted; - WARN_ON(!ap->ops->error_handler); __ata_port_freeze(ap); - nr_aborted = ata_port_abort(ap); - return nr_aborted; + return ata_port_abort(ap); } EXPORT_SYMBOL_GPL(ata_port_freeze); @@ -1393,7 +1392,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) /** * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT * @qc: qc to perform REQUEST_SENSE_SENSE_DATA_EXT to - * @cmd: scsi command for which the sense code should be set * * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK * SENSE. This function is an EH helper. @@ -1401,9 +1399,9 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) * LOCKING: * Kernel thread context (may sleep). */ -static void ata_eh_request_sense(struct ata_queued_cmd *qc, - struct scsi_cmnd *cmd) +static void ata_eh_request_sense(struct ata_queued_cmd *qc) { + struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; struct ata_taskfile tf; unsigned int err_mask; @@ -1541,7 +1539,6 @@ static void ata_eh_analyze_serror(struct ata_link *link) /** * ata_eh_analyze_tf - analyze taskfile of a failed qc * @qc: qc to analyze - * @tf: Taskfile registers to analyze * * Analyze taskfile of @qc and further determine cause of * failure. This function also requests ATAPI sense data if @@ -1553,9 +1550,9 @@ static void ata_eh_analyze_serror(struct ata_link *link) * RETURNS: * Determined recovery action */ -static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, - const struct ata_taskfile *tf) +static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc) { + const struct ata_taskfile *tf = &qc->result_tf; unsigned int tmp, action = 0; u8 stat = tf->status, err = tf->error; @@ -1579,7 +1576,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, switch (qc->dev->class) { case ATA_DEV_ZAC: if (stat & ATA_SENSE) - ata_eh_request_sense(qc, qc->scsicmd); + ata_eh_request_sense(qc); fallthrough; case ATA_DEV_ATA: if (err & ATA_ICRC) @@ -1957,7 +1954,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) qc->err_mask |= ehc->i.err_mask; /* analyze TF */ - ehc->i.action |= ata_eh_analyze_tf(qc, &qc->result_tf); + ehc->i.action |= ata_eh_analyze_tf(qc); /* DEV errors are probably spurious in case of ATA_BUS error */ if (qc->err_mask & AC_ERR_ATA_BUS) @@ -2940,6 +2937,23 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { WARN_ON(dev->class == ATA_DEV_PMP); + /* + * The link may be in a deep sleep, wake it up. + * + * If the link is in deep sleep, ata_phys_link_offline() + * will return true, causing the revalidation to fail, + * which leads to a (potentially) needless hard reset. + * + * ata_eh_recover() will later restore the link policy + * to ap->target_lpm_policy after revalidation is done. + */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) { + rc = ata_eh_set_lpm(link, ATA_LPM_MAX_POWER, + r_failed_dev); + if (rc) + goto err; + } + if (ata_phys_link_offline(ata_dev_phys_link(dev))) { rc = -EIO; goto err; diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 13b9d0fdd42c..b6806d41a8c5 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -870,7 +870,7 @@ static ssize_t ata_ncq_prio_enable_show(struct device *device, if (!dev) rc = -ENODEV; else - ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE; + ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED; spin_unlock_irq(ap->lock); return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable); @@ -905,9 +905,9 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, } if (input) - dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE; + dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLED; else - dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE; + dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLED; unlock: spin_unlock_irq(ap->lock); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index ff9602a0e54e..e2ebb0b065e2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1603,9 +1603,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_IO; qc->nbytes = n_block * scmd->device->sector_size; - rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, - qc->hw_tag, class); - + rc = ata_build_rw_tf(qc, block, n_block, tf_flags, class); if (likely(rc == 0)) return 0; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index b1666adc1c3a..7916e369e15e 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -776,7 +776,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * @qc: Command on going * @bytes: number of bytes * - * Transfer Transfer data from/to the ATAPI device. + * Transfer data from/to the ATAPI device. * * LOCKING: * Inherited from caller. diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 98bc8649c63f..2c5c8273af01 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -44,9 +44,8 @@ static inline void ata_force_cbl(struct ata_port *ap) { } #endif extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); -extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, - u64 block, u32 n_block, unsigned int tf_flags, - unsigned int tag, int class); +extern int ata_build_rw_tf(struct ata_queued_cmd *qc, u64 block, u32 n_block, + unsigned int tf_flags, int class); extern u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev); extern unsigned ata_exec_internal(struct ata_device *dev, @@ -64,7 +63,7 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern unsigned int ata_dev_set_feature(struct ata_device *dev, - u8 enable, u8 feature); + u8 subcmd, u8 action); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index bfea2be2959a..9ccaac9e2bc3 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -666,8 +666,7 @@ static u8 pata_macio_bmdma_status(struct ata_port *ap) * a multi-block transfer. * * - The dbdma fifo hasn't yet finished flushing to - * to system memory when the disk interrupt occurs. - * + * system memory when the disk interrupt occurs. */ /* First check for errors */ diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h new file mode 100644 index 000000000000..77997b35612c --- /dev/null +++ b/include/dt-bindings/ata/ahci.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause */ +/* + * This header provides constants for most AHCI bindings. + */ + +#ifndef _DT_BINDINGS_ATA_AHCI_H +#define _DT_BINDINGS_ATA_AHCI_H + +/* Host Bus Adapter generic platform capabilities */ +#define HBA_SSS (1 << 27) +#define HBA_SMPS (1 << 28) + +/* Host Bus Adapter port-specific platform capabilities */ +#define HBA_PORT_HPCP (1 << 18) +#define HBA_PORT_MPSP (1 << 19) +#define HBA_PORT_CPD (1 << 20) +#define HBA_PORT_ESP (1 << 21) +#define HBA_PORT_FBSCP (1 << 22) + +#endif diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h index 49e5383d4222..17fa26215292 100644 --- a/include/linux/ahci_platform.h +++ b/include/linux/ahci_platform.h @@ -13,6 +13,7 @@ #include <linux/compiler.h> +struct clk; struct device; struct ata_port_info; struct ahci_host_priv; @@ -21,8 +22,12 @@ struct scsi_host_template; int ahci_platform_enable_phys(struct ahci_host_priv *hpriv); void ahci_platform_disable_phys(struct ahci_host_priv *hpriv); +struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, + const char *con_id); int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); +int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv); +int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv); int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv); void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv); int ahci_platform_enable_resources(struct ahci_host_priv *hpriv); @@ -41,6 +46,7 @@ int ahci_platform_resume_host(struct device *dev); int ahci_platform_suspend(struct device *dev); int ahci_platform_resume(struct device *dev); -#define AHCI_PLATFORM_GET_RESETS 0x01 +#define AHCI_PLATFORM_GET_RESETS BIT(0) +#define AHCI_PLATFORM_RST_TRIGGER BIT(1) #endif /* _AHCI_PLATFORM_H */ diff --git a/include/linux/ata.h b/include/linux/ata.h index 21292b5bbb55..e3050e153a71 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -566,6 +566,18 @@ struct ata_bmdma_prd { ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ ((id)[ATA_ID_FEATURE_SUPP] & (1 << 2))) +#define ata_id_has_devslp(id) \ + ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ + ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8))) +#define ata_id_has_ncq_autosense(id) \ + ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ + ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7))) +#define ata_id_has_dipm(id) \ + ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ + ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 3))) #define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10)) #define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11)) #define ata_id_u32(id,n) \ @@ -578,9 +590,6 @@ struct ata_bmdma_prd { #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) #define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4)) -#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)) -#define ata_id_has_ncq_autosense(id) \ - ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7)) static inline bool ata_id_has_hipm(const u16 *id) { @@ -592,17 +601,6 @@ static inline bool ata_id_has_hipm(const u16 *id) return val & (1 << 9); } -static inline bool ata_id_has_dipm(const u16 *id) -{ - u16 val = id[ATA_ID_FEATURE_SUPP]; - - if (val == 0 || val == 0xffff) - return false; - - return val & (1 << 3); -} - - static inline bool ata_id_has_fua(const u16 *id) { if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000) @@ -771,16 +769,21 @@ static inline bool ata_id_has_read_log_dma_ext(const u16 *id) static inline bool ata_id_has_sense_reporting(const u16 *id) { - if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) + if (!(id[ATA_ID_CFS_ENABLE_2] & BIT(15))) + return false; + if ((id[ATA_ID_COMMAND_SET_3] & (BIT(15) | BIT(14))) != BIT(14)) return false; - return id[ATA_ID_COMMAND_SET_3] & (1 << 6); + return id[ATA_ID_COMMAND_SET_3] & BIT(6); } static inline bool ata_id_sense_reporting_enabled(const u16 *id) { - if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) + if (!ata_id_has_sense_reporting(id)) + return false; + /* ata_id_has_sense_reporting() == true, word 86 must have bit 15 set */ + if ((id[ATA_ID_COMMAND_SET_4] & (BIT(15) | BIT(14))) != BIT(14)) return false; - return id[ATA_ID_COMMAND_SET_4] & (1 << 6); + return id[ATA_ID_COMMAND_SET_4] & BIT(6); } /** diff --git a/include/linux/libata.h b/include/linux/libata.h index 20765d1c5f80..fe990176e6ee 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -101,7 +101,7 @@ enum { ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ ATA_DFLAG_NCQ_SEND_RECV = (1 << 19), /* device supports NCQ SEND and RECV */ ATA_DFLAG_NCQ_PRIO = (1 << 20), /* device supports NCQ priority */ - ATA_DFLAG_NCQ_PRIO_ENABLE = (1 << 21), /* Priority cmds sent to dev */ + ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 21), /* Priority cmds sent to dev */ ATA_DFLAG_INIT_MASK = (1 << 24) - 1, ATA_DFLAG_DETACH = (1 << 24), |