kbuild: split device tree build rules into scripts/Makefile.dtbs

scripts/Makefile.lib is included not only from scripts/Makefile.build
but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o},
where DT build rules are not required.

Split the DT build rules out to scripts/Makefile.dtbs, and include it
only when necessary.

While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of
$(multi-dtb-y).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

1 files changed, 0 insertions, 115 deletions

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 207325eaf1d1..4fea9e9bec3c 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -45,11 +45,6 @@ else
 obj-y		:= $(filter-out %/, $(obj-y))
 endif
 
-ifdef need-dtbslist
-dtb-y		+= $(addsuffix /dtbs-list, $(subdir-ym))
-always-y	+= dtbs-list
-endif
-
 # Expand $(foo-objs) $(foo-y) etc. by replacing their individuals
 suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s))))
 # List composite targets that are constructed by combining other targets
@@ -80,19 +75,6 @@ always-y += $(hostprogs-always-y) $(hostprogs-always-m)
 userprogs += $(userprogs-always-y) $(userprogs-always-m)
 always-y += $(userprogs-always-y) $(userprogs-always-m)
 
-# DTB
-# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
-dtb-$(CONFIG_OF_ALL_DTBS)       += $(dtb-)
-
-# Composite DTB (i.e. DTB constructed by overlay)
-multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs)
-# Primitive DTB compiled from *.dts
-real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs)
-# Base DTB that overlay is applied onto
-base-dtb-y := $(filter %.dtb, $(call real-search, $(multi-dtb-y), .dtb, -dtbs))
-
-always-y			+= $(dtb-y)
-
 # Add subdir path
 
 ifneq ($(obj),.)
@@ -104,9 +86,6 @@ lib-y		:= $(addprefix $(obj)/,$(lib-y))
 real-obj-y	:= $(addprefix $(obj)/,$(real-obj-y))
 real-obj-m	:= $(addprefix $(obj)/,$(real-obj-m))
 multi-obj-m	:= $(addprefix $(obj)/, $(multi-obj-m))
-dtb-y		:= $(addprefix $(obj)/, $(dtb-y))
-multi-dtb-y	:= $(addprefix $(obj)/, $(multi-dtb-y))
-real-dtb-y	:= $(addprefix $(obj)/, $(real-dtb-y))
 subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
 endif
 
@@ -255,12 +234,6 @@ cpp_flags      = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 
 ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
 
-DTC_INCLUDE    := $(srctree)/scripts/dtc/include-prefixes
-
-dtc_cpp_flags  = -Wp,-MMD,$(depfile).pre.tmp -nostdinc                    \
-		 $(addprefix -I,$(DTC_INCLUDE))                          \
-		 -undef -D__DTS__
-
 ifdef CONFIG_OBJTOOL
 
 objtool := $(objtree)/tools/objtool/objtool
@@ -350,94 +323,6 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_gzip = GZIP    $@
       cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@
 
-# DTC
-# ---------------------------------------------------------------------------
-DTC ?= $(objtree)/scripts/dtc/dtc
-DTC_FLAGS += \
-	-Wno-unique_unit_address
-
-# Disable noisy checks by default
-ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),)
-DTC_FLAGS += -Wno-unit_address_vs_reg \
-	-Wno-avoid_unnecessary_addr_size \
-	-Wno-alias_paths \
-	-Wno-graph_child_address \
-	-Wno-simple_bus_reg
-else
-DTC_FLAGS += \
-        -Wunique_unit_address_if_enabled
-endif
-
-ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
-DTC_FLAGS += -Wnode_name_chars_strict \
-	-Wproperty_name_chars_strict \
-	-Wunique_unit_address
-endif
-
-DTC_FLAGS += $(DTC_FLAGS_$(target-stem))
-
-# Set -@ if the target is a base DTB that overlay is applied onto
-DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@)
-
-# Generate an assembly file to wrap the output of the device tree compiler
-quiet_cmd_wrap_S_dtb = WRAP    $@
-      cmd_wrap_S_dtb = {								\
-		symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*));	\
-		echo '\#include <asm-generic/vmlinux.lds.h>';				\
-		echo '.section .dtb.init.rodata,"a"';					\
-		echo '.balign STRUCT_ALIGNMENT';					\
-		echo ".global $${symbase}_begin";					\
-		echo "$${symbase}_begin:";						\
-		echo '.incbin "$<" ';							\
-		echo ".global $${symbase}_end";						\
-		echo "$${symbase}_end:";						\
-		echo '.balign STRUCT_ALIGNMENT';					\
-	} > $@
-
-$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
-	$(call if_changed,wrap_S_dtb)
-
-$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE
-	$(call if_changed,wrap_S_dtb)
-
-quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C],   )
-cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true)
-
-quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@
-cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
-	$(DTC) -o $@ -b 0 \
-		$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
-	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \
-	$(cmd_dtb_check)
-
-# NOTE:
-# Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single
-# DTB is turned into a multi-blob DTB, $^ will contain header file dependencies
-# recorded in the .*.cmd file.
-quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@
-      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check)
-
-$(multi-dtb-y): FORCE
-	$(call if_changed,fdtoverlay)
-$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs)
-
-ifneq ($(CHECK_DTBS),)
-DT_CHECKER ?= dt-validate
-DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m)
-DT_BINDING_DIR := Documentation/devicetree/bindings
-DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json
-dtb-check-enabled = $(if $(filter %.dtb, $@),y)
-endif
-
-$(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
-	$(call if_changed_dep,dtc)
-
-$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
-	$(call if_changed_dep,dtc)
-
-dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
-
 # Bzip2
 # ---------------------------------------------------------------------------