Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - handle number of queue changes in the TCP and RDMA drivers
        (Daniel Wagner)
      - allow changing the number of queues in nvmet (Daniel Wagner)
      - also consider host_iface when checking ip options (Daniel
        Wagner)
      - don't map pages which can't come from HIGHMEM (Fabio M. De
        Francesco)
      - avoid unnecessary flush bios in nvmet (Guixin Liu)
      - shrink and better pack the nvme_iod structure (Keith Busch)
      - add comment for unaligned "fake" nqn (Linjun Bao)
      - print actual source IP address through sysfs "address" attr
        (Martin Belanger)
      - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
      - handle effects after freeing the request (Keith Busch)
      - copy firmware_rev on each init (Keith Busch)
      - restrict management ioctls to admin (Keith Busch)
      - ensure subsystem reset is single threaded (Keith Busch)
      - report the actual number of tagset maps in nvme-pci (Keith
        Busch)
      - small fabrics authentication fixups (Christoph Hellwig)
      - add common code for tagset allocation and freeing (Christoph
        Hellwig)
      - stop using the request_queue in nvmet (Christoph Hellwig)
      - set min_align_mask before calculating max_hw_sectors (Rishabh
        Bhatnagar)
      - send a rediscover uevent when a persistent discovery controller
        reconnects (Sagi Grimberg)
      - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)

 - MD pull request via Song:
      - Various raid5 fix and clean up, by Logan Gunthorpe and David
        Sloan.
      - Raid10 performance optimization, by Yu Kuai.

 - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)

 - IO scheduler switching quisce fix (Keith)

 - s390/dasd block driver updates (Stefan)

 - support for recovery for the ublk driver (ZiyangZhang)

 - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)

 - blk-mq and null_blk map fixes (Bart)

 - various bcache fixes (Coly, Jilin, Jules)

 - nbd signal hang fix (Shigeru)

 - block writeback throttling fix (Yu)

 - optimize the passthrough mapping handling (me)

 - prepare block cgroups to being gendisk based (Christoph)

 - get rid of an old PSI hack in the block layer, moving it to the
   callers instead where it belongs (Christoph)

 - blk-throttle fixes and cleanups (Yu)

 - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
   Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
   Miaohe, Bart, Coly, Gaosheng

* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
  sbitmap: fix lockup while swapping
  block: add rationale for not using blk_mq_plug() when applicable
  block: adapt blk_mq_plug() to not plug for writes that require a zone lock
  s390/dasd: use blk_mq_alloc_disk
  blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  blk-mq: use quiesced elevator switch when reinitializing queues
  block: replace blk_queue_nowait with bdev_nowait
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  ...

2 files changed, 20 insertions, 1 deletions

diff --git a/include/uapi/linux/sed-opal.h b/include/uapi/linux/sed-opal.h
index 6f5af1a84213..2573772e2fb3 100644
--- a/include/uapi/linux/sed-opal.h
+++ b/include/uapi/linux/sed-opal.h
@@ -132,6 +132,18 @@ struct opal_read_write_table {
 	__u64 priv;
 };
 
+#define OPAL_FL_SUPPORTED		0x00000001
+#define OPAL_FL_LOCKING_SUPPORTED	0x00000002
+#define OPAL_FL_LOCKING_ENABLED		0x00000004
+#define OPAL_FL_LOCKED			0x00000008
+#define OPAL_FL_MBR_ENABLED		0x00000010
+#define OPAL_FL_MBR_DONE		0x00000020
+
+struct opal_status {
+	__u32 flags;
+	__u32 reserved;
+};
+
 #define IOC_OPAL_SAVE		    _IOW('p', 220, struct opal_lock_unlock)
 #define IOC_OPAL_LOCK_UNLOCK	    _IOW('p', 221, struct opal_lock_unlock)
 #define IOC_OPAL_TAKE_OWNERSHIP	    _IOW('p', 222, struct opal_key)
@@ -148,5 +160,6 @@ struct opal_read_write_table {
 #define IOC_OPAL_MBR_DONE           _IOW('p', 233, struct opal_mbr_done)
 #define IOC_OPAL_WRITE_SHADOW_MBR   _IOW('p', 234, struct opal_shadow_mbr)
 #define IOC_OPAL_GENERIC_TABLE_RW   _IOW('p', 235, struct opal_read_write_table)
+#define IOC_OPAL_GET_STATUS         _IOR('p', 236, struct opal_status)
 
 #endif /* _UAPI_SED_OPAL_H */
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index 677edaab2b66..8f88e3a29998 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -17,7 +17,8 @@
 #define	UBLK_CMD_STOP_DEV	0x07
 #define	UBLK_CMD_SET_PARAMS	0x08
 #define	UBLK_CMD_GET_PARAMS	0x09
-
+#define	UBLK_CMD_START_USER_RECOVERY	0x10
+#define	UBLK_CMD_END_USER_RECOVERY	0x11
 /*
  * IO commands, issued by ublk server, and handled by ublk driver.
  *
@@ -74,9 +75,14 @@
  */
 #define UBLK_F_NEED_GET_DATA (1UL << 2)
 
+#define UBLK_F_USER_RECOVERY	(1UL << 3)
+
+#define UBLK_F_USER_RECOVERY_REISSUE	(1UL << 4)
+
 /* device state */
 #define UBLK_S_DEV_DEAD	0
 #define UBLK_S_DEV_LIVE	1
+#define UBLK_S_DEV_QUIESCED	2
 
 /* shipped via sqe->cmd of io_uring command */
 struct ublksrv_ctrl_cmd {