net: tso: Introduce tso_dma_map and helpers

Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.

The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).

The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.

Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.

The added TSO DMA map helpers are:

tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.

tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.

tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.

tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.

tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.

tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 100 insertions, 0 deletions

diff --git a/include/net/tso.h b/include/net/tso.h
index e7e157ae0526..da82aabd1d48 100644
--- a/include/net/tso.h
+++ b/include/net/tso.h
@@ -3,6 +3,7 @@
 #define _TSO_H
 
 #include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
 #include <net/ip.h>
 
 #define TSO_HEADER_SIZE		256
@@ -28,4 +29,103 @@ void tso_build_hdr(const struct sk_buff *skb, char *hdr, struct tso_t *tso,
 void tso_build_data(const struct sk_buff *skb, struct tso_t *tso, int size);
 int tso_start(struct sk_buff *skb, struct tso_t *tso);
 
+/**
+ * struct tso_dma_map - DMA mapping state for GSO payload
+ * @dev: device used for DMA mapping
+ * @skb: the GSO skb being mapped
+ * @hdr_len: per-segment header length
+ * @iova_state: DMA IOVA state (when IOMMU available)
+ * @iova_offset: global byte offset into IOVA range (IOVA path only)
+ * @total_len: total payload length
+ * @frag_idx: current region (-1 = linear, 0..nr_frags-1 = frag)
+ * @offset: byte offset within current region
+ * @linear_dma: DMA address of the linear payload
+ * @linear_len: length of the linear payload
+ * @nr_frags: number of frags successfully DMA-mapped
+ * @frags: per-frag DMA address and length
+ *
+ * DMA-maps the payload regions of a GSO skb (linear data + frags).
+ * Prefers the DMA IOVA API for a single contiguous mapping with one
+ * IOTLB sync; falls back to per-region dma_map_phys() otherwise.
+ */
+struct tso_dma_map {
+	struct device		*dev;
+	const struct sk_buff	*skb;
+	unsigned int		hdr_len;
+	/* IOVA path */
+	struct dma_iova_state	iova_state;
+	size_t			iova_offset;
+	size_t			total_len;
+	/* Fallback path if IOVA path fails */
+	int			frag_idx;
+	unsigned int		offset;
+	dma_addr_t		linear_dma;
+	unsigned int		linear_len;
+	unsigned int		nr_frags;
+	struct {
+		dma_addr_t	dma;
+		unsigned int	len;
+	} frags[MAX_SKB_FRAGS];
+};
+
+/**
+ * struct tso_dma_map_completion_state - Completion-time cleanup state
+ * @iova_state: DMA IOVA state (when IOMMU available)
+ * @total_len: total payload length of the IOVA mapping
+ *
+ * Drivers store this on their SW ring at xmit time via
+ * tso_dma_map_completion_save(), then call tso_dma_map_complete() at
+ * completion time.
+ */
+struct tso_dma_map_completion_state {
+	struct dma_iova_state iova_state;
+	size_t total_len;
+};
+
+int tso_dma_map_init(struct tso_dma_map *map, struct device *dev,
+		     const struct sk_buff *skb, unsigned int hdr_len);
+void tso_dma_map_cleanup(struct tso_dma_map *map);
+unsigned int tso_dma_map_count(struct tso_dma_map *map, unsigned int len);
+bool tso_dma_map_next(struct tso_dma_map *map, dma_addr_t *addr,
+		      unsigned int *chunk_len, unsigned int *mapping_len,
+		      unsigned int seg_remaining);
+
+/**
+ * tso_dma_map_completion_save - save state needed for completion-time cleanup
+ * @map: the xmit-time DMA map
+ * @cstate: driver-owned storage that persists until completion
+ *
+ * Should be called at xmit time to update the completion state and later passed
+ * to tso_dma_map_complete().
+ */
+static inline void
+tso_dma_map_completion_save(const struct tso_dma_map *map,
+			    struct tso_dma_map_completion_state *cstate)
+{
+	cstate->iova_state = map->iova_state;
+	cstate->total_len = map->total_len;
+}
+
+/**
+ * tso_dma_map_complete - tear down mapping at completion time
+ * @dev: the device that owns the mapping
+ * @cstate: state saved by tso_dma_map_completion_save()
+ *
+ * Return: true if the IOVA path was used and the mapping has been
+ * destroyed; false if the fallback per-region path was used and the
+ * driver must unmap via its normal completion path.
+ */
+static inline bool
+tso_dma_map_complete(struct device *dev,
+		     struct tso_dma_map_completion_state *cstate)
+{
+	if (dma_use_iova(&cstate->iova_state)) {
+		dma_iova_destroy(dev, &cstate->iova_state, cstate->total_len,
+				 DMA_TO_DEVICE, 0);
+		return true;
+	}
+
+	return false;
+}
+
 #endif	/* _TSO_H */