Merge branch 'origin' into devel

Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c

39 files changed, 2009 insertions, 1081 deletions

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 9df6887b91f6..8a372bac0e43 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,8 +2,8 @@
 # USB Storage driver configuration
 #
 
-comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;"
-comment "see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
 	depends on USB
 
 config USB_STORAGE
@@ -32,21 +32,25 @@ config USB_STORAGE_DEBUG
 	  verbose debugging messages.
 
 config USB_STORAGE_DATAFAB
-	bool "Datafab Compact Flash Reader support"
+	tristate "Datafab Compact Flash Reader support"
 	depends on USB_STORAGE
 	help
 	  Support for certain Datafab CompactFlash readers.
 	  Datafab has a web page at <http://www.datafabusa.com/>.
 
+	  If this driver is compiled as a module, it will be named ums-datafab.
+
 config USB_STORAGE_FREECOM
-	bool "Freecom USB/ATAPI Bridge support"
+	tristate "Freecom USB/ATAPI Bridge support"
 	depends on USB_STORAGE
 	help
 	  Support for the Freecom USB to IDE/ATAPI adaptor.
 	  Freecom has a web page at <http://www.freecom.de/>.
 
+	  If this driver is compiled as a module, it will be named ums-freecom.
+
 config USB_STORAGE_ISD200
-	bool "ISD-200 USB/ATA Bridge support"
+	tristate "ISD-200 USB/ATA Bridge support"
 	depends on USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
@@ -61,8 +65,10 @@ config USB_STORAGE_ISD200
 	  - CyQ've CQ8060A CDRW drive
 	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 
+	  If this driver is compiled as a module, it will be named ums-isd200.
+
 config USB_STORAGE_USBAT
-	bool "USBAT/USBAT02-based storage support"
+	tristate "USBAT/USBAT02-based storage support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support storage devices
@@ -82,30 +88,38 @@ config USB_STORAGE_USBAT
 	  - RCA LYRA MP3 portable
 	  - Sandisk ImageMate SDDR-05b
 
+	  If this driver is compiled as a module, it will be named ums-usbat.
+
 config USB_STORAGE_SDDR09
-	bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Sandisk SDDR-09
 	  SmartMedia reader in the USB Mass Storage driver.
 	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 
+	  If this driver is compiled as a module, it will be named ums-sddr09.
+
 config USB_STORAGE_SDDR55
-	bool "SanDisk SDDR-55 SmartMedia support"
+	tristate "SanDisk SDDR-55 SmartMedia support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Sandisk SDDR-55
 	  SmartMedia reader in the USB Mass Storage driver.
 
+	  If this driver is compiled as a module, it will be named ums-sddr55.
+
 config USB_STORAGE_JUMPSHOT
-	bool "Lexar Jumpshot Compact Flash Reader"
+	tristate "Lexar Jumpshot Compact Flash Reader"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Lexar Jumpshot
 	  USB CompactFlash reader.
 
+	  If this driver is compiled as a module, it will be named ums-jumpshot.
+
 config USB_STORAGE_ALAUDA
-	bool "Olympus MAUSB-10/Fuji DPC-R1 support"
+	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Olympus MAUSB-10
@@ -114,8 +128,10 @@ config USB_STORAGE_ALAUDA
 	  These devices are based on the Alauda chip and support both
 	  XD and SmartMedia cards.
 
+	  If this driver is compiled as a module, it will be named ums-alauda.
+
 config USB_STORAGE_ONETOUCH
-	bool "Support OneTouch Button on Maxtor Hard Drives"
+	tristate "Support OneTouch Button on Maxtor Hard Drives"
 	depends on USB_STORAGE
 	depends on INPUT=y || INPUT=USB_STORAGE
 	help
@@ -127,8 +143,10 @@ config USB_STORAGE_ONETOUCH
 	  this input in any keybinding software. (e.g. gnome's keyboard short-
 	  cuts)
 
+	  If this driver is compiled as a module, it will be named ums-onetouch.
+
 config USB_STORAGE_KARMA
-	bool "Support for Rio Karma music player"
+	tristate "Support for Rio Karma music player"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Rio Karma
@@ -139,8 +157,10 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
+	  If this driver is compiled as a module, it will be named ums-karma.
+
 config USB_STORAGE_CYPRESS_ATACB
-	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
 	---help---
 	  Say Y here if you want to use SAT (ata pass through) on devices based
@@ -150,6 +170,8 @@ config USB_STORAGE_CYPRESS_ATACB
 	  If you say no here your device will still work with the standard usb
 	  mass storage class.
 
+	  If this driver is compiled as a module, it will be named ums-cypress.
+
 config USB_LIBUSUAL
 	bool "The shared table of common (or usual) storage devices"
 	depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index b32069313390..5be54c019662 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -10,21 +10,36 @@ EXTRA_CFLAGS	:= -Idrivers/scsi
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
 usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT)	+= shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)	+= sddr55.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)	+= freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)	+= isd200.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
 
-ifneq ($(CONFIG_USB_LIBUSUAL),)
-	obj-$(CONFIG_USB)	+= libusual.o
+ifeq ($(CONFIG_USB_LIBUSUAL),)
+	usb-storage-objs	+= usual-tables.o
+else
+	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
+
+obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= ums-datafab.o
+obj-$(CONFIG_USB_STORAGE_FREECOM)	+= ums-freecom.o
+obj-$(CONFIG_USB_STORAGE_ISD200)	+= ums-isd200.o
+obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= ums-jumpshot.o
+obj-$(CONFIG_USB_STORAGE_KARMA)		+= ums-karma.o
+obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
+obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
+obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
+
+ums-alauda-objs		:= alauda.o
+ums-cypress-objs	:= cypress_atacb.o
+ums-datafab-objs	:= datafab.o
+ums-freecom-objs	:= freecom.o
+ums-isd200-objs		:= isd200.o
+ums-jumpshot-objs	:= jumpshot.o
+ums-karma-objs		:= karma.o
+ums-onetouch-objs	:= onetouch.o
+ums-sddr09-objs		:= sddr09.o
+ums-sddr55-objs		:= sddr55.o
+ums-usbat-objs		:= shuttle_usbat.o
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 8d3711a7ff06..67edc65acb8e 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -31,6 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -39,7 +41,79 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "alauda.h"
+
+MODULE_DESCRIPTION("Driver for Alauda-based card readers");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR		0x01
+#define ALAUDA_STATUS_READY		0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS	0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG		0x86
+#define ALAUDA_GET_SM_MEDIA_SIG		0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD			0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA	0x85
+#define ALAUDA_BULK_READ_BLOCK		0x94
+#define ALAUDA_BULK_ERASE_BLOCK		0xa3
+#define ALAUDA_BULK_WRITE_BLOCK		0xb4
+#define ALAUDA_BULK_GET_STATUS2		0xb7
+#define ALAUDA_BULK_RESET_MEDIA		0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD			0x00
+#define ALAUDA_PORT_SM			0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF    0xffff
+#define SPARE    0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+	unsigned long capacity;		/* total media size in bytes */
+	unsigned int pagesize;		/* page size in bytes */
+	unsigned int blocksize;		/* number of pages per block */
+	unsigned int uzonesize;		/* number of usable blocks per zone */
+	unsigned int zonesize;		/* number of blocks per zone */
+	unsigned int blockmask;		/* mask to get page from address */
+
+	unsigned char pageshift;
+	unsigned char blockshift;
+	unsigned char zoneshift;
+
+	u16 **lba_to_pba;		/* logical to physical block map */
+	u16 **pba_to_lba;		/* physical to logical block map */
+};
+
+struct alauda_info {
+	struct alauda_media_info port[2];
+	int wr_ep;			/* endpoint to write data out of */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;	/* additional sense code */
+	unsigned long sense_ascq;	/* additional sense code qualifier */
+};
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -52,6 +126,48 @@
 #define PBA_HI(pba) (pba >> 3)
 #define PBA_ZONE(pba) (pba >> 11)
 
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id alauda_usb_ids[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+#	include "unusual_alauda.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Media handling
  */
@@ -307,7 +423,8 @@ static int alauda_init_media(struct us_data *us)
 		data[0], data[1], data[2], data[3]);
 	media_info = alauda_card_find_id(data[1]);
 	if (media_info == NULL) {
-		printk("alauda_init_media: Unrecognised media signature: "
+		printk(KERN_WARNING
+			"alauda_init_media: Unrecognised media signature: "
 			"%02X %02X %02X %02X\n",
 			data[0], data[1], data[2], data[3]);
 		return USB_STOR_TRANSPORT_ERROR;
@@ -518,7 +635,8 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
 
 		/* check even parity */
 		if (parity[data[6] ^ data[7]]) {
-			printk("alauda_read_map: Bad parity in LBA for block %d"
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad parity in LBA for block %d"
 			       " (%02X %02X)\n", i, data[6], data[7]);
 			pba_to_lba[i] = UNUSABLE;
 			continue;
@@ -538,13 +656,16 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
 		 */
 
 		if (lba_offset >= uzonesize) {
-			printk("alauda_read_map: Bad low LBA %d for block %d\n",
+			printk(KERN_WARNING
+			       "alauda_read_map: Bad low LBA %d for block %d\n",
 			       lba_real, blocknum);
 			continue;
 		}
 
 		if (lba_to_pba[lba_offset] != UNDEF) {
-			printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
+			printk(KERN_WARNING
+			       "alauda_read_map: "
+			       "LBA %d seen for PBA %d and %d\n",
 			       lba_real, lba_to_pba[lba_offset], blocknum);
 			continue;
 		}
@@ -712,13 +833,15 @@ static int alauda_write_lba(struct us_data *us, u16 lba,
 	if (pba == 1) {
 		/* Maybe it is impossible to write to PBA 1.
 		   Fake success, but don't do anything. */
-		printk("alauda_write_lba: avoid writing to pba 1\n");
+		printk(KERN_WARNING
+		       "alauda_write_lba: avoid writing to pba 1\n");
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
 	new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
 	if (!new_pba) {
-		printk("alauda_write_lba: Out of unused blocks\n");
+		printk(KERN_WARNING
+		       "alauda_write_lba: Out of unused blocks\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -818,7 +941,7 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
 	len = min(sectors, blocksize) * (pagesize + 64);
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("alauda_read_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_read_data: Out of memory\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -911,7 +1034,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
 	len = min(sectors, blocksize) * pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("alauda_write_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -921,7 +1044,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
 	 */
 	blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
 	if (blockbuffer == NULL) {
-		printk("alauda_write_data: Out of memory\n");
+		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 		kfree(buffer);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
@@ -991,7 +1114,7 @@ static void alauda_info_destructor(void *extra)
 /*
  * Initialize alauda_info struct and find the data-write endpoint
  */
-int init_alauda(struct us_data *us)
+static int init_alauda(struct us_data *us)
 {
 	struct alauda_info *info;
 	struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
@@ -1013,7 +1136,7 @@ int init_alauda(struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int rc;
 	struct alauda_info *info = (struct alauda_info *) us->extra;
@@ -1121,3 +1244,48 @@ int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED;
 }
 
+static int alauda_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - alauda_usb_ids) + alauda_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Alauda Control/Bulk";
+	us->transport = alauda_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver alauda_driver = {
+	.name =		"ums-alauda",
+	.probe =	alauda_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	alauda_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init alauda_init(void)
+{
+	return usb_register(&alauda_driver);
+}
+
+static void __exit alauda_exit(void)
+{
+	usb_deregister(&alauda_driver);
+}
+
+module_init(alauda_init);
+module_exit(alauda_exit);
diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h
deleted file mode 100644
index a700f87d0803..000000000000
--- a/drivers/usb/storage/alauda.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Driver for Alauda-based card readers
- *
- * Current development and maintenance by:
- *    (c) 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See alauda.c for more explanation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_ALAUDA_H
-#define _USB_ALAUDA_H
-
-/*
- * Status bytes
- */
-#define ALAUDA_STATUS_ERROR		0x01
-#define ALAUDA_STATUS_READY		0x40
-
-/*
- * Control opcodes (for request field)
- */
-#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
-#define ALAUDA_GET_SM_MEDIA_STATUS	0x98
-#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
-#define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
-#define ALAUDA_GET_XD_MEDIA_SIG		0x86
-#define ALAUDA_GET_SM_MEDIA_SIG		0x96
-
-/*
- * Bulk command identity (byte 0)
- */
-#define ALAUDA_BULK_CMD			0x40
-
-/*
- * Bulk opcodes (byte 1)
- */
-#define ALAUDA_BULK_GET_REDU_DATA	0x85
-#define ALAUDA_BULK_READ_BLOCK		0x94
-#define ALAUDA_BULK_ERASE_BLOCK		0xa3
-#define ALAUDA_BULK_WRITE_BLOCK		0xb4
-#define ALAUDA_BULK_GET_STATUS2		0xb7
-#define ALAUDA_BULK_RESET_MEDIA		0xe0
-
-/*
- * Port to operate on (byte 8)
- */
-#define ALAUDA_PORT_XD			0x00
-#define ALAUDA_PORT_SM			0x01
-
-/*
- * LBA and PBA are unsigned ints. Special values.
- */
-#define UNDEF    0xffff
-#define SPARE    0xfffe
-#define UNUSABLE 0xfffd
-
-int init_alauda(struct us_data *us);
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct alauda_media_info {
-	unsigned long capacity;		/* total media size in bytes */
-	unsigned int pagesize;		/* page size in bytes */
-	unsigned int blocksize;		/* number of pages per block */
-	unsigned int uzonesize;		/* number of usable blocks per zone */
-	unsigned int zonesize;		/* number of blocks per zone */
-	unsigned int blockmask;		/* mask to get page from address */
-
-	unsigned char pageshift;
-	unsigned char blockshift;
-	unsigned char zoneshift;
-
-	u16 **lba_to_pba;		/* logical to physical block map */
-	u16 **pba_to_lba;		/* physical to logical block map */
-};
-
-struct alauda_info {
-	struct alauda_media_info port[2];
-	int wr_ep;			/* endpoint to write data out of */
-
-	unsigned char sense_key;
-	unsigned long sense_asc;	/* additional sense code */
-	unsigned long sense_ascq;	/* additional sense code qualifier */
-};
-
-#endif
-
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 898e67d30e56..c84471821183 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -19,6 +19,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_eh.h>
@@ -29,6 +30,49 @@
 #include "scsiglue.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id cypress_usb_ids[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * ATACB is a protocol used on cypress usb<->ata bridge to
  * send raw ATA command over mass storage
@@ -36,7 +80,7 @@
  * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
  * datasheet from cypress.com.
  */
-void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 {
 	unsigned char save_cmnd[MAX_COMMAND_SIZE];
 
@@ -133,19 +177,18 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 		/* build the command for
 		 * reading the ATA registers */
-		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, 0);
-		srb->sdb.length = sizeof(regs);
-		sg_init_one(&ses.sense_sgl, regs, srb->sdb.length);
-		srb->sdb.table.sgl = &ses.sense_sgl;
-		srb->sc_data_direction = DMA_FROM_DEVICE;
-		srb->sdb.table.nents = 1;
+		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
 		/* we use the same command as before, but we set
 		 * the read taskfile bit, for not executing atacb command,
 		 * but reading register selected in srb->cmnd[4]
 		 */
+		srb->cmd_len = 16;
+		srb->cmnd = ses.cmnd;
 		srb->cmnd[2] = 1;
 
 		usb_stor_transparent_scsi_command(srb, us);
+		memcpy(regs, srb->sense_buffer, sizeof(regs));
 		tmp_result = srb->result;
 		scsi_eh_restore_cmnd(srb, &ses);
 		/* we fail to get registers, report invalid command */
@@ -162,8 +205,8 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 		/* XXX we should generate sk, asc, ascq from status and error
 		 * regs
-		 * (see 11.1 Error translation � ATA device error to SCSI error map)
-		 * and ata_to_sense_error from libata.
+		 * (see 11.1 Error translation ATA device error to SCSI error
+		 *  map, and ata_to_sense_error from libata.)
 		 */
 
 		/* Sense data is current and format is descriptor. */
@@ -198,3 +241,48 @@ end:
 	if (srb->cmnd[0] == ATA_12)
 		srb->cmd_len = 12;
 }
+
+
+static int cypress_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - cypress_usb_ids) + cypress_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->protocol_name = "Transparent SCSI with Cypress ATACB";
+	us->proto_handler = cypress_atacb_passthrough;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver cypress_driver = {
+	.name =		"ums-cypress",
+	.probe =	cypress_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	cypress_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init cypress_init(void)
+{
+	return usb_register(&cypress_driver);
+}
+
+static void __exit cypress_exit(void)
+{
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 17f1ae232919..2b6e565262c2 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -49,6 +49,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -58,12 +59,65 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "datafab.h"
+
+MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+struct datafab_info {
+	unsigned long   sectors;	/* total sector count */
+	unsigned long   ssize;		/* sector size in bytes */
+	signed char	lun;		/* used for dual-slot readers */
+
+	/* the following aren't used yet */
+	unsigned char   sense_key;
+	unsigned long   sense_asc;	/* additional sense code */
+	unsigned long   sense_ascq;	/* additional sense code qualifier */
+};
 
 static int datafab_determine_lun(struct us_data *us,
 				 struct datafab_info *info);
 
 
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id datafab_usb_ids[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+#	include "unusual_datafab.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static inline int
 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
 	if (len == 0)
@@ -500,7 +554,7 @@ static void datafab_info_destructor(void *extra)
 
 // Transport for the Datafab MDCFE-B
 //
-int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct datafab_info *info;
 	int rc;
@@ -665,3 +719,49 @@ int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
 	info->sense_ascq = 0x00;
 	return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int datafab_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - datafab_usb_ids) + datafab_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Datafab Bulk-Only";
+	us->transport = datafab_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver datafab_driver = {
+	.name =		"ums-datafab",
+	.probe =	datafab_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	datafab_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init datafab_init(void)
+{
+	return usb_register(&datafab_driver);
+}
+
+static void __exit datafab_exit(void)
+{
+	usb_deregister(&datafab_driver);
+}
+
+module_init(datafab_init);
+module_exit(datafab_exit);
diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h
deleted file mode 100644
index 32e3f271e582..000000000000
--- a/drivers/usb/storage/datafab.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Driver for Datafab MDCFE-B USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
- *
- * See datafab.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_DATAFAB_MDCFE_B_H
-#define _USB_DATAFAB_MDCFE_B_H
-
-extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct datafab_info {
-	unsigned long   sectors;	// total sector count
-	unsigned long   ssize;		// sector size in bytes
-	signed char	lun;		// used for dual-slot readers
-	
-	// the following aren't used yet
-	unsigned char   sense_key;
-	unsigned long   sense_asc;	// additional sense code
-	unsigned long   sense_ascq;	// additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 73ac7262239e..54cc94277acb 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -26,6 +26,7 @@
  * (http://www.freecom.de/)
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -33,7 +34,10 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "freecom.h"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
 static void pdump (void *, int);
@@ -103,6 +107,47 @@ struct freecom_status {
 #define FCM_PACKET_LENGTH		64
 #define FCM_STATUS_PACKET_LENGTH	4
 
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id freecom_usb_ids[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+#	include "unusual_freecom.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 static int
 freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
 		unsigned int ipipe, unsigned int opipe, int count)
@@ -173,7 +218,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
  * Transport for the Freecom USB/IDE adaptor.
  *
  */
-int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct freecom_cb_wrap *fcb;
 	struct freecom_status  *fst;
@@ -377,8 +422,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int
-freecom_init (struct us_data *us)
+static int init_freecom(struct us_data *us)
 {
 	int result;
 	char *buffer = us->iobuf;
@@ -417,7 +461,7 @@ freecom_init (struct us_data *us)
 	return USB_STOR_TRANSPORT_GOOD;
 }
 
-int usb_stor_freecom_reset(struct us_data *us)
+static int usb_stor_freecom_reset(struct us_data *us)
 {
 	printk (KERN_CRIT "freecom reset called\n");
 
@@ -479,3 +523,48 @@ static void pdump (void *ibuffer, int length)
 }
 #endif
 
+static int freecom_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - freecom_usb_ids) + freecom_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "Freecom";
+	us->transport = freecom_transport;
+	us->transport_reset = usb_stor_freecom_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver freecom_driver = {
+	.name =		"ums-freecom",
+	.probe =	freecom_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	freecom_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init freecom_init(void)
+{
+	return usb_register(&freecom_driver);
+}
+
+static void __exit freecom_exit(void)
+{
+	usb_deregister(&freecom_driver);
+}
+
+module_init(freecom_init);
+module_exit(freecom_exit);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 383abf2516a5..882c57b399f7 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -44,6 +44,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hdreg.h>
 #include <linux/scatterlist.h>
@@ -57,7 +58,53 @@
 #include "protocol.h"
 #include "debug.h"
 #include "scsiglue.h"
-#include "isd200.h"
+
+MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
+MODULE_AUTHOR("Bj�rn Stenberg <bjorn@haxx.se>");
+MODULE_LICENSE("GPL");
+
+static int isd200_Initialization(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id isd200_usb_ids[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev isd200_unusual_dev_list[] = {
+#	include "unusual_isd200.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
 
 
 /* Timeout defines (in Seconds) */
@@ -1518,7 +1565,7 @@ static int isd200_init_info(struct us_data *us)
  * Initialization for the ISD200 
  */
 
-int isd200_Initialization(struct us_data *us)
+static int isd200_Initialization(struct us_data *us)
 {
 	US_DEBUGP("ISD200 Initialization...\n");
 
@@ -1549,7 +1596,7 @@ int isd200_Initialization(struct us_data *us)
  *
  */
 
-void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
+static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int sendToTransport = 1, orig_bufflen;
 	union ata_cdb ataCdb;
@@ -1570,3 +1617,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 
 	isd200_srb_set_bufflen(srb, orig_bufflen);
 }
+
+static int isd200_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - isd200_usb_ids) + isd200_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->protocol_name = "ISD200 ATA/ATAPI";
+	us->proto_handler = isd200_ata_command;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver isd200_driver = {
+	.name =		"ums-isd200",
+	.probe =	isd200_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	isd200_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init isd200_init(void)
+{
+	return usb_register(&isd200_driver);
+}
+
+static void __exit isd200_exit(void)
+{
+	usb_deregister(&isd200_driver);
+}
+
+module_init(isd200_init);
+module_exit(isd200_exit);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index df67f13c9e73..1c69420e3acf 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -46,6 +46,7 @@
   */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -55,9 +56,61 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "jumpshot.h"
 
 
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id jumpshot_usb_ids[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+   unsigned long   sectors;     /* total sector count */
+   unsigned long   ssize;       /* sector size in bytes */
+
+   /* the following aren't used yet */
+   unsigned char   sense_key;
+   unsigned long   sense_asc;   /* additional sense code */
+   unsigned long   sense_ascq;  /* additional sense code qualifier */
+};
+
 static inline int jumpshot_bulk_read(struct us_data *us,
 				     unsigned char *data, 
 				     unsigned int len)
@@ -429,7 +482,7 @@ static void jumpshot_info_destructor(void *extra)
 
 // Transport for the Lexar 'Jumpshot'
 //
-int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	struct jumpshot_info *info;
 	int rc;
@@ -592,3 +645,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
 	info->sense_ascq = 0x00;
 	return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int jumpshot_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - jumpshot_usb_ids) + jumpshot_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name  = "Lexar Jumpshot Control/Bulk";
+	us->transport = jumpshot_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+	.name =		"ums-jumpshot",
+	.probe =	jumpshot_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	jumpshot_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init jumpshot_init(void)
+{
+	return usb_register(&jumpshot_driver);
+}
+
+static void __exit jumpshot_exit(void)
+{
+	usb_deregister(&jumpshot_driver);
+}
+
+module_init(jumpshot_init);
+module_exit(jumpshot_exit);
diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h
deleted file mode 100644
index 19bac9d1558f..000000000000
--- a/drivers/usb/storage/jumpshot.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Driver for Lexar "Jumpshot" USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
- *
- * See jumpshot.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_JUMPSHOT_H
-#define _USB_JUMPSHOT_H
-
-extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct jumpshot_info {
-   unsigned long   sectors;     // total sector count
-   unsigned long   ssize;       // sector size in bytes
- 
-   // the following aren't used yet
-   unsigned char   sense_key;
-   unsigned long   sense_asc;   // additional sense code
-   unsigned long   sense_ascq;  // additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index 0d79ae5683f7..7953d93a7739 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -18,6 +18,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -25,7 +27,10 @@
 #include "usb.h"
 #include "transport.h"
 #include "debug.h"
-#include "karma.h"
+
+MODULE_DESCRIPTION("Driver for Rio Karma");
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>");
+MODULE_LICENSE("GPL");
 
 #define RIO_PREFIX "RIOP\x00"
 #define RIO_PREFIX_LEN 5
@@ -36,13 +41,53 @@
 #define RIO_LEAVE_STORAGE 0x2
 #define RIO_RESET 0xC
 
-extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
-
 struct karma_data {
 	int in_storage;
 	char *recv;
 };
 
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id karma_usb_ids[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Send commands to Rio Karma.
  *
@@ -104,7 +149,7 @@ err:
  * Trap START_STOP and READ_10 to leave/re-enter storage mode.
  * Everything else is propagated to the normal bulk layer.
  */
-int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 	struct karma_data *data = (struct karma_data *) us->extra;
@@ -133,7 +178,7 @@ static void rio_karma_destructor(void *extra)
 	kfree(data->recv);
 }
 
-int rio_karma_init(struct us_data *us)
+static int rio_karma_init(struct us_data *us)
 {
 	int ret = 0;
 	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
@@ -153,3 +198,48 @@ int rio_karma_init(struct us_data *us)
 out:
 	return ret;
 }
+
+static int karma_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - karma_usb_ids) + karma_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "Rio Karma/Bulk";
+	us->transport = rio_karma_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver karma_driver = {
+	.name =		"ums-karma",
+	.probe =	karma_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	karma_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init karma_init(void)
+{
+	return usb_register(&karma_driver);
+}
+
+static void __exit karma_exit(void)
+{
+	usb_deregister(&karma_driver);
+}
+
+module_init(karma_init);
+module_exit(karma_exit);
diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h
deleted file mode 100644
index 8a60972af8c5..000000000000
--- a/drivers/usb/storage/karma.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _KARMA_USB_H
-#define _KARMA_USB_H
-
-extern int rio_karma_init(struct us_data *us);
-extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index f970b27ba308..fe3ffe1459b2 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
 static int usu_probe_thread(void *arg);
 
 /*
- * The table.
- */
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName, useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
-  .driver_info = (flags) }
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = ((useType)<<24) }
-
-struct usb_device_id storage_usb_ids [] = {
-#	include "unusual_devs.h"
-	{ } /* Terminating entry */
-};
-
-#undef USUAL_DEV
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-
-MODULE_DEVICE_TABLE(usb, storage_usb_ids);
-EXPORT_SYMBOL_GPL(storage_usb_ids);
-
-/*
  * @type: the module type as an integer
  */
 void usb_usual_set_present(int type)
@@ -167,7 +136,7 @@ static struct usb_driver usu_driver = {
 	.name =		"libusual",
 	.probe =	usu_probe,
 	.disconnect =	usu_disconnect,
-	.id_table =	storage_usb_ids,
+	.id_table =	usb_storage_usb_ids,
 };
 
 /*
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index c7bf8954b4e4..380233bd6a39 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -35,9 +35,16 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 #include "usb.h"
-#include "onetouch.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
+MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
+MODULE_LICENSE("GPL");
+
+#define ONETOUCH_PKT_LEN        0x02
+#define ONETOUCH_BUTTON         KEY_PROG1
+
+static int onetouch_connect_input(struct us_data *ss);
 static void onetouch_release_input(void *onetouch_);
 
 struct usb_onetouch {
@@ -52,6 +59,46 @@ struct usb_onetouch {
 	unsigned int is_open:1;
 };
 
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id onetouch_usb_ids[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev onetouch_unusual_dev_list[] = {
+#	include "unusual_onetouch.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static void usb_onetouch_irq(struct urb *urb)
 {
 	struct usb_onetouch *onetouch = urb->context;
@@ -127,7 +174,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 }
 #endif /* CONFIG_PM */
 
-int onetouch_connect_input(struct us_data *ss)
+static int onetouch_connect_input(struct us_data *ss)
 {
 	struct usb_device *udev = ss->pusb_dev;
 	struct usb_host_interface *interface;
@@ -236,3 +283,46 @@ static void onetouch_release_input(void *onetouch_)
 				onetouch->data, onetouch->data_dma);
 	}
 }
+
+static int onetouch_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - onetouch_usb_ids) + onetouch_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* Use default transport and protocol */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver onetouch_driver = {
+	.name =		"ums-onetouch",
+	.probe =	onetouch_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	onetouch_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init onetouch_init(void)
+{
+	return usb_register(&onetouch_driver);
+}
+
+static void __exit onetouch_exit(void)
+{
+	usb_deregister(&onetouch_driver);
+}
+
+module_init(onetouch_init);
+module_exit(onetouch_exit);
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
deleted file mode 100644
index 41c7aa8f0446..000000000000
--- a/drivers/usb/storage/onetouch.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ONETOUCH_H_
-#define _ONETOUCH_H_
-
-#define ONETOUCH_PKT_LEN        0x02
-#define ONETOUCH_BUTTON         KEY_PROG1
-
-int onetouch_connect_input(struct us_data *ss);
-
-#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index be441d84bc64..fc310f75eada 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
 
 /***********************************************************************
  * Scatter-gather transfer buffer access routines
@@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
 	/* Return the amount actually transferred */
 	return cnt;
 }
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
 /* Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
@@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer,
 	if (buflen < scsi_bufflen(srb))
 		scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
 }
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 727c506417cc..4ca3b5860643 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,6 +135,12 @@ static int slave_configure(struct scsi_device *sdev)
 		if (sdev->request_queue->max_sectors > max_sectors)
 			blk_queue_max_sectors(sdev->request_queue,
 					      max_sectors);
+	} else if (sdev->type == TYPE_TAPE) {
+		/* Tapes need much higher max_sector limits, so just
+		 * raise it to the maximum possible (4 GB / 512) and
+		 * let the queue segment size sort out the real limit.
+		 */
+		blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF);
 	}
 
 	/* Some USB host controllers can't do DMA; they have to use PIO.
@@ -563,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = {
 	[7]	= 0x0a,			    /* additional length */
 	[12]	= 0x24			    /* Invalid Field in CDB */
 };
-
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 531ae5c5abf3..ab5f9f37575a 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -41,6 +41,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -51,7 +52,53 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr09.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader");
+MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr09_usb_ids[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -723,7 +770,7 @@ sddr09_read_data(struct us_data *us,
 	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_read_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -838,7 +885,8 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
 	if (pba == UNDEF) {
 		pba = sddr09_find_unused_pba(info, lba);
 		if (!pba) {
-			printk("sddr09_write_lba: Out of unused blocks\n");
+			printk(KERN_WARNING
+			       "sddr09_write_lba: Out of unused blocks\n");
 			return -ENOSPC;
 		}
 		info->pba_to_lba[pba] = lba;
@@ -849,7 +897,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
 	if (pba == 1) {
 		/* Maybe it is impossible to write to PBA 1.
 		   Fake success, but don't do anything. */
-		printk("sddr09: avoid writing to pba 1\n");
+		printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
 		return 0;
 	}
 
@@ -954,7 +1002,7 @@ sddr09_write_data(struct us_data *us,
 	blocklen = (pagelen << info->blockshift);
 	blockbuffer = kmalloc(blocklen, GFP_NOIO);
 	if (!blockbuffer) {
-		printk("sddr09_write_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -965,7 +1013,7 @@ sddr09_write_data(struct us_data *us,
 	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_write_data: Out of memory\n");
+		printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
 		kfree(blockbuffer);
 		return -ENOMEM;
 	}
@@ -1112,7 +1160,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 
 	if (result) {
 		US_DEBUGP("Result of read_deviceID is %d\n", result);
-		printk("sddr09: could not read card info\n");
+		printk(KERN_WARNING "sddr09: could not read card info\n");
 		return NULL;
 	}
 
@@ -1153,7 +1201,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 		sprintf(blurbtxt + strlen(blurbtxt),
 			", WP");
 
-	printk("%s\n", blurbtxt);
+	printk(KERN_WARNING "%s\n", blurbtxt);
 
 	return cardinfo;
 }
@@ -1184,7 +1232,7 @@ sddr09_read_map(struct us_data *us) {
 	alloc_len = (alloc_blocks << CONTROL_SHIFT);
 	buffer = kmalloc(alloc_len, GFP_NOIO);
 	if (buffer == NULL) {
-		printk("sddr09_read_map: out of memory\n");
+		printk(KERN_WARNING "sddr09_read_map: out of memory\n");
 		result = -1;
 		goto done;
 	}
@@ -1198,7 +1246,7 @@ sddr09_read_map(struct us_data *us) {
 	info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
 
 	if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
-		printk("sddr09_read_map: out of memory\n");
+		printk(KERN_WARNING "sddr09_read_map: out of memory\n");
 		result = -1;
 		goto done;
 	}
@@ -1238,7 +1286,8 @@ sddr09_read_map(struct us_data *us) {
 			if (ptr[j] != 0)
 				goto nonz;
 		info->pba_to_lba[i] = UNUSABLE;
-		printk("sddr09: PBA %d has no logical mapping\n", i);
+		printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
+		       i);
 		continue;
 
 	nonz:
@@ -1251,7 +1300,8 @@ sddr09_read_map(struct us_data *us) {
 	nonff:
 		/* normal PBAs start with six FFs */
 		if (j < 6) {
-			printk("sddr09: PBA %d has no logical mapping: "
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has no logical mapping: "
 			       "reserved area = %02X%02X%02X%02X "
 			       "data status %02X block status %02X\n",
 			       i, ptr[0], ptr[1], ptr[2], ptr[3],
@@ -1261,7 +1311,8 @@ sddr09_read_map(struct us_data *us) {
 		}
 
 		if ((ptr[6] >> 4) != 0x01) {
-			printk("sddr09: PBA %d has invalid address field "
+			printk(KERN_WARNING
+			       "sddr09: PBA %d has invalid address field "
 			       "%02X%02X/%02X%02X\n",
 			       i, ptr[6], ptr[7], ptr[11], ptr[12]);
 			info->pba_to_lba[i] = UNUSABLE;
@@ -1270,7 +1321,8 @@ sddr09_read_map(struct us_data *us) {
 
 		/* check even parity */
 		if (parity[ptr[6] ^ ptr[7]]) {
-			printk("sddr09: Bad parity in LBA for block %d"
+			printk(KERN_WARNING
+			       "sddr09: Bad parity in LBA for block %d"
 			       " (%02X %02X)\n", i, ptr[6], ptr[7]);
 			info->pba_to_lba[i] = UNUSABLE;
 			continue;
@@ -1289,7 +1341,8 @@ sddr09_read_map(struct us_data *us) {
 		 */
 
 		if (lba >= 1000) {
-			printk("sddr09: Bad low LBA %d for block %d\n",
+			printk(KERN_WARNING
+			       "sddr09: Bad low LBA %d for block %d\n",
 			       lba, i);
 			goto possibly_erase;
 		}
@@ -1297,7 +1350,8 @@ sddr09_read_map(struct us_data *us) {
 		lba += 1000*(i/0x400);
 
 		if (info->lba_to_pba[lba] != UNDEF) {
-			printk("sddr09: LBA %d seen for PBA %d and %d\n",
+			printk(KERN_WARNING
+			       "sddr09: LBA %d seen for PBA %d and %d\n",
 			       lba, info->lba_to_pba[lba], i);
 			goto possibly_erase;
 		}
@@ -1399,7 +1453,7 @@ sddr09_common_init(struct us_data *us) {
  * unusual devices list but called from here then LUN 0 of the combo reader
  * is not recognized. But I do not know what precisely these calls do.
  */
-int
+static int
 usb_stor_sddr09_dpcm_init(struct us_data *us) {
 	int result;
 	unsigned char *data = us->iobuf;
@@ -1449,7 +1503,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
 /*
  * Transport for the Microtech DPCM-USB
  */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 
@@ -1491,7 +1545,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Transport for the Sandisk SDDR-09
  */
-int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	static unsigned char sensekey = 0, sensecode = 0;
 	static unsigned char havefakesense = 0;
@@ -1690,7 +1744,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Initialization routine for the sddr09 subdriver
  */
-int
+static int
 usb_stor_sddr09_init(struct us_data *us) {
 	return sddr09_common_init(us);
 }
+
+static int sddr09_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr09_usb_ids) + sddr09_unusual_dev_list);
+	if (result)
+		return result;
+
+	if (us->protocol == US_PR_DPCM_USB) {
+		us->transport_name = "Control/Bulk-EUSB/SDDR09";
+		us->transport = dpcm_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 1;
+	} else {
+		us->transport_name = "EUSB/SDDR09";
+		us->transport = sddr09_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 0;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr09_driver = {
+	.name =		"ums-sddr09",
+	.probe =	sddr09_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr09_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init sddr09_init(void)
+{
+	return usb_register(&sddr09_driver);
+}
+
+static void __exit sddr09_exit(void)
+{
+	usb_deregister(&sddr09_driver);
+}
+
+module_init(sddr09_init);
+module_exit(sddr09_exit);
diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h
deleted file mode 100644
index b701172e12e3..000000000000
--- a/drivers/usb/storage/sddr09.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
- *
- * See sddr09.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_EUSB_SDDR09_H
-#define _USB_SHUTTLE_EUSB_SDDR09_H
-
-/* Sandisk SDDR-09 stuff */
-
-extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
-
-/* Microtech DPCM-USB stuff */
-
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 0d8df7577899..44dfed7754ed 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -24,6 +24,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -33,7 +34,48 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr55.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader");
+MODULE_AUTHOR("Simon Munton");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr55_usb_ids[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr55_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr55_unusual_dev_list[] = {
+#	include "unusual_sddr55.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -513,7 +555,8 @@ static int sddr55_read_deviceID(struct us_data *us,
 }
 
 
-int sddr55_reset(struct us_data *us) {
+static int sddr55_reset(struct us_data *us)
+{
 	return 0;
 }
 
@@ -703,7 +746,9 @@ static int sddr55_read_map(struct us_data *us) {
 		
 		if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
 		    !info->force_read_only) {
-			printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000);
+			printk(KERN_WARNING
+			       "sddr55: map inconsistency at LBA %04X\n",
+			       lba + zone * 1000);
 			info->force_read_only = 1;
 		}
 
@@ -732,7 +777,7 @@ static void sddr55_card_info_destructor(void *extra) {
 /*
  * Transport for the Sandisk SDDR-55
  */
-int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int result;
 	static unsigned char inquiry_response[8] = {
@@ -929,3 +974,49 @@ int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
 }
 
+
+static int sddr55_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr55_usb_ids) + sddr55_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "SDDR55";
+	us->transport = sddr55_transport;
+	us->transport_reset = sddr55_reset;
+	us->max_lun = 0;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr55_driver = {
+	.name =		"ums-sddr55",
+	.probe =	sddr55_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr55_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init sddr55_init(void)
+{
+	return usb_register(&sddr55_driver);
+}
+
+static void __exit sddr55_exit(void)
+{
+	usb_deregister(&sddr55_driver);
+}
+
+module_init(sddr55_init);
+module_exit(sddr55_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index ae6d64810d2a..b62a28814ebe 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -42,6 +42,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/cdrom.h>
 
@@ -52,7 +53,100 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "shuttle_usbat.h"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+/* Supported device types */
+#define USBAT_DEV_HP8200	0x01
+#define USBAT_DEV_FLASH		0x02
+
+#define USBAT_EPP_PORT		0x10
+#define USBAT_EPP_REGISTER	0x30
+#define USBAT_ATA		0x40
+#define USBAT_ISA		0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG		0x00
+#define USBAT_CMD_WRITE_REG		0x01
+#define USBAT_CMD_READ_BLOCK	0x02
+#define USBAT_CMD_WRITE_BLOCK	0x03
+#define USBAT_CMD_COND_READ_BLOCK	0x04
+#define USBAT_CMD_COND_WRITE_BLOCK	0x05
+#define USBAT_CMD_WRITE_REGS	0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD	0x80
+#define USBAT_CMD_SET_FEAT	0x81
+#define USBAT_CMD_UIO		0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ	1
+#define USBAT_UIO_WRITE	0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ	0x20	/* full compare */
+#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE	0
+#define USBAT_FLASH_MEDIA_CF	1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME	0
+#define USBAT_FLASH_MEDIA_CHANGED	1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
+#define USBAT_ATA_ERROR     0x11  /* error (R) */
+#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
+#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS    0x17  /* device status (R) */
+#define USBAT_ATA_CMD       0x17  /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
+				     /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1		0x20 /* I/O 1 */
+#define USBAT_UIO_0		0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1		0x04 /* Input 1 */
+#define USBAT_UIO_UI0		0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
+				     /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
+#define USBAT_FEAT_U1	0x08
+#define USBAT_FEAT_U0	0x04
+#define USBAT_FEAT_ET1	0x02
+#define USBAT_FEAT_ET2	0x01
+
+struct usbat_info {
+	int devicetype;
+
+	/* Used for Flash readers only */
+	unsigned long sectors;     /* total sector count */
+	unsigned long ssize;       /* sector size in bytes */
+
+	unsigned char sense_key;
+	unsigned long sense_asc;   /* additional sense code */
+	unsigned long sense_ascq;  /* additional sense code qualifier */
+};
 
 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -63,6 +157,48 @@ static int transferred = 0;
 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
 
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id usbat_usb_ids[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 /*
  * Convenience function to produce an ATA read/write sectors command
  * Use cmd=0x20 for read, cmd=0x30 for write
@@ -1684,37 +1820,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
 	return USB_STOR_TRANSPORT_FAILED;
 }
 
-int init_usbat_cd(struct us_data *us)
+static int init_usbat_cd(struct us_data *us)
 {
 	return init_usbat(us, USBAT_DEV_HP8200);
 }
 
-
-int init_usbat_flash(struct us_data *us)
+static int init_usbat_flash(struct us_data *us)
 {
 	return init_usbat(us, USBAT_DEV_FLASH);
 }
 
-int init_usbat_probe(struct us_data *us)
+static int usbat_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
 {
-	return init_usbat(us, 0);
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usbat_usb_ids) + usbat_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* The actual transport will be determined later by the
+	 * initialization routine; this is just a placeholder.
+	 */
+	us->transport_name = "Shuttle USBAT";
+	us->transport = usbat_flash_transport;
+	us->transport_reset = usb_stor_CB_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
 }
 
-/*
- * Default transport function. Attempts to detect which transport function
- * should be called, makes it the new default, and calls it.
- *
- * This function should never be called. Our usbat_init() function detects the
- * device type and changes the us->transport ptr to the transport function
- * relevant to the device.
- * However, we'll support this impossible(?) case anyway.
- */
-int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
+static struct usb_driver usbat_driver = {
+	.name =		"ums-usbat",
+	.probe =	usbat_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usbat_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init usbat_init(void)
 {
-	struct usbat_info *info = (struct usbat_info*) (us->extra);
-
-	if (usbat_set_transport(us, info, 0))
-		return USB_STOR_TRANSPORT_ERROR;
+	return usb_register(&usbat_driver);
+}
 
-	return us->transport(srb, us);	
+static void __exit usbat_exit(void)
+{
+	usb_deregister(&usbat_driver);
 }
+
+module_init(usbat_init);
+module_exit(usbat_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
deleted file mode 100644
index d8bfc43e9044..000000000000
--- a/drivers/usb/storage/shuttle_usbat.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See shuttle_usbat.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_USBAT_H
-#define _USB_SHUTTLE_USBAT_H
-
-/* Supported device types */
-#define USBAT_DEV_HP8200	0x01
-#define USBAT_DEV_FLASH		0x02
-
-#define USBAT_EPP_PORT		0x10
-#define USBAT_EPP_REGISTER	0x30
-#define USBAT_ATA		0x40
-#define USBAT_ISA		0x50
-
-/* Commands (need to be logically OR'd with an access type */
-#define USBAT_CMD_READ_REG		0x00
-#define USBAT_CMD_WRITE_REG		0x01
-#define USBAT_CMD_READ_BLOCK	0x02
-#define USBAT_CMD_WRITE_BLOCK	0x03
-#define USBAT_CMD_COND_READ_BLOCK	0x04
-#define USBAT_CMD_COND_WRITE_BLOCK	0x05
-#define USBAT_CMD_WRITE_REGS	0x07
-
-/* Commands (these don't need an access type) */
-#define USBAT_CMD_EXEC_CMD	0x80
-#define USBAT_CMD_SET_FEAT	0x81
-#define USBAT_CMD_UIO		0x82
-
-/* Methods of accessing UIO register */
-#define USBAT_UIO_READ	1
-#define USBAT_UIO_WRITE	0
-
-/* Qualifier bits */
-#define USBAT_QUAL_FCQ	0x20	/* full compare */
-#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
-
-/* USBAT Flash Media status types */
-#define USBAT_FLASH_MEDIA_NONE	0
-#define USBAT_FLASH_MEDIA_CF	1
-
-/* USBAT Flash Media change types */
-#define USBAT_FLASH_MEDIA_SAME	0
-#define USBAT_FLASH_MEDIA_CHANGED	1
-
-/* USBAT ATA registers */
-#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
-#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
-#define USBAT_ATA_ERROR     0x11  /* error (R) */
-#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
-#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
-#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
-#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
-#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
-#define USBAT_ATA_STATUS    0x17  /* device status (R) */
-#define USBAT_ATA_CMD       0x17  /* device command (W) */
-#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
-
-/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
-#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
-				     /* CDT = ACKD & !UI1 & !UI0 */
-#define USBAT_UIO_1		0x20 /* I/O 1 */
-#define USBAT_UIO_0		0x10 /* I/O 0 */
-#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
-#define USBAT_UIO_UI1		0x04 /* Input 1 */
-#define USBAT_UIO_UI0		0x02 /* Input 0 */
-#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
-
-/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
-#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
-#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
-				     /* If ACKD=1, set OE1 to 1 also. */
-#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
-#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
-
-/* USBAT Features */
-#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
-#define USBAT_FEAT_U1	0x08
-#define USBAT_FEAT_U0	0x04
-#define USBAT_FEAT_ET1	0x02
-#define USBAT_FEAT_ET2	0x01
-
-extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat_cd(struct us_data *us);
-extern int init_usbat_flash(struct us_data *us);
-extern int init_usbat_probe(struct us_data *us);
-
-struct usbat_info {
-	int devicetype;
-
-	/* Used for Flash readers only */
-	unsigned long sectors;     /* total sector count */
-	unsigned long ssize;       /* sector size in bytes */
-
-	unsigned char sense_key;
-	unsigned long sense_asc;   /* additional sense code */
-	unsigned long sense_ascq;  /* additional sense code qualifier */
-};
-
-#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fb65d221cedf..d48c8553539d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 		status = us->current_urb->actual_length;
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
 /* This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
@@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
 
 
 /*
@@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, size, result,
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
 
 /*
  * Receive one interrupt buffer, without timeouts, but allowing early
@@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
 	return interpret_urb_result(us, pipe, length, result, 
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
 
 /*
  * Transfer a scatter-gather list via bulk transfer
@@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
 	scsi_set_resid(srb, scsi_bufflen(srb) - partial);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
 
 /*
  * Transfer an entire SCSI command's worth of data payload over the bulk
@@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
 		*residual = length_left;
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
 
 /***********************************************************************
  * Transport routines
@@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 		usb_stor_clear_halt(us, pipe);
 	return USB_STOR_TRANSPORT_FAILED;
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
 
 /*
  * Bulk only transport
@@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* we should never get here, but if we do, we're in trouble */
 	return USB_STOR_TRANSPORT_ERROR;
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
 
 /***********************************************************************
  * Reset routines
@@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
 /* This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
@@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us)
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, NULL, 0);
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
 /* Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/unusual_alauda.h
index 20d0fe6ba0c8..8c412f885dd2 100644
--- a/drivers/usb/storage/freecom.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,13 +1,4 @@
-/* Driver for Freecom USB/IDE adaptor
- *
- * Freecom v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 David Brown <usb-storage@davidb.org>
- *
- * See freecom.c for more explanation
+/* Unusual Devices File for the Alauda-based card readers
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -24,11 +15,17 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _FREECOM_USB_H
-#define _FREECOM_USB_H
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+		defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
+		"Fujifilm",
+		"DPC-R1 (Alauda)",
+		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_freecom_reset(struct us_data *us);
-extern int freecom_init (struct us_data *us);
+UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
+		"Olympus",
+		"MAUSB-10 (Alauda)",
+		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
new file mode 100644
index 000000000000..44be6d75dab6
--- /dev/null
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -0,0 +1,34 @@
+/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ *	with support for ATACB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+		defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress AT2LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
new file mode 100644
index 000000000000..c9298ce9f223
--- /dev/null
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -0,0 +1,98 @@
+/* Unusual Devices File for the Datafab USB Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+		defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
+		"Datafab",
+		"MDCFE-B USB CF Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver.  Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+		"SIIG/Datafab",
+		"SIIG/Datafab Memory Stick+CF Reader/Writer",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"MD2/MD3 Disk enclosure",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+		"Datafab/Unknown",
+		"Datafab-based Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+		"PNY/Datafab",
+		"PNY/Datafab CF+SM Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"Simple Tech/Datafab CF+SM Reader",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+/* Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
+		"DataFab Systems Inc.",
+		"USB CF+MS",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"CF",
+		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index cfde74a6faa3..1c1f643e8a78 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -53,6 +53,11 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
@@ -80,18 +85,6 @@ UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
 		"CD-Writer+",
 		US_SC_8070, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
-		"HP",
-		"CD-Writer+ 8200e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-
-UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
-		"HP",
-		"CD-Writer+ CD-4e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-#endif
-
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 		"HP",
@@ -246,12 +239,7 @@ UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
@@ -288,13 +276,6 @@ UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_KARMA
-UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
-		"Rio",
-		"Rio Karma",
-		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
-#endif
-
 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
  * Obviously the PROM has not been customized by the VAR;
  * the Vendor and Product string descriptors are:
@@ -375,22 +356,6 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-/* CY7C68300 : support atacb */
-UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-
-/* CY7C68310 : support atacb and atacb2 */
-UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress ISD-300LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-#endif
-
 /* Reported by Simon Levitt <simon@whattf.com>
  * This entry needs Sub and Proto fields */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
@@ -467,20 +432,7 @@ UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-
-/* This entry is from Andries.Brouwer@cwi.nl */
-UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
-		"SCM Microsystems",
-		"eUSB SmartMedia / CompactFlash Adapter",
-		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
-		0),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB CompactFlash Adapter",
@@ -535,14 +487,6 @@ UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"CD-RW Device",
 		US_SC_8020, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
-		"Shuttle/SCM",
-		"USBAT-02",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-		US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		"Samsung",
@@ -645,14 +589,6 @@ UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
-		"Sony",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
 		"Sony",
@@ -749,13 +685,6 @@ UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 		"Silicon Media R/W",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
-		"Fujifilm",
-		"DPC-R1 (Alauda)",
- 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
 /* Reported by RTE <raszilki@yandex.ru> */
 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
 		"JetFlash",
@@ -798,32 +727,6 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 		US_SC_SCSI, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
-		"In-System",
-		"USB/IDE Bridge (ATA/ATAPI)",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
-		"In-System",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
-		"In-System",
-		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
-		"In-System",
-		"USB Storage Adapter V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
 /* Submitted by Sven Anderson <sven-linux@anderson.de>
  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
@@ -877,14 +780,6 @@ UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
 		US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
 		0),
 
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
-		"Lexar",
-		"Jumpshot USB CF Reader",
-		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
-		US_FL_NEED_OVERRIDE ),
-#endif
-
 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 		"Lexar",
@@ -935,14 +830,6 @@ UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 		"Floppy Drive",
 		US_SC_UFI, US_PR_CB, NULL, 0 ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
-		"Olympus",
-		"Camedia MAUSB-2",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		"SigmaTel",
@@ -1043,35 +930,12 @@ UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
-		"Sandisk",
-		"ImageMate SDDR-05b",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-		US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 		"Sandisk",
 		"ImageMate SDDR-12",
 		US_SC_SCSI, US_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR-09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
-		"Freecom",
-		"USB-IDE",
-		US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
-#endif
-
 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 		"Freecom Technologies",
@@ -1091,12 +955,7 @@ UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
@@ -1104,108 +963,6 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
-		"Olympus",
-		"MAUSB-10 (Alauda)",
- 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
-		"Datafab",
-		"MDCFE-B USB CF Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-/*
- * The following Datafab-based devices may or may not work
- * using the current driver...the 0xffff is arbitrary since I
- * don't know what device versions exist for these guys.
- *
- * The 0xa003 and 0xa004 devices in particular I'm curious about.
- * I'm told they exist but so far nobody has come forward to say that
- * they work with this driver.  Given the success we've had getting
- * other Datafab-based cards operational with this driver, I've decided
- * to leave these two devices in the list.
- */
-UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
-		"SIIG/Datafab",
-		"SIIG/Datafab Memory Stick+CF Reader/Writer",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
-UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"MD2/MD3 Disk enclosure",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		US_FL_SINGLE_LUN ),
-
-UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
-		"Datafab/Unknown",
-		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
-		"PNY/Datafab",
-		"PNY/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
-		"Simple Tech/Datafab",
-		"Simple Tech/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-#endif
-		
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* Contributed by Peter Waechtler */
-UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
-		"Datafab",
-		"MDSM-B reader",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_FIX_INQUIRY ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Submitted by Olaf Hering <olh@suse.de> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-		"Datafab Systems, Inc.",
-		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* SM part - aeb <Andries.Brouwer@cwi.nl> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-		"Datafab Systems, Inc.",
-		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Reported by Felix Moeller <felix@derklecks.de>
- * in Germany this is sold by Hama with the productnumber 46952
- * as "DualSlot CompactFlash(TM) & MStick Drive USB"
- */
-UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
-		"DataFab Systems Inc.",
-		"USB CF+MS",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		0 ),
-
-#endif
-
 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
  * Only revision 1.13 tested (same for all of the above devices,
  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
@@ -1409,29 +1166,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
-		"ATI",
-		"USB Cable 205",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-		0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-		"Acomdata",
-		"CF",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-		"Acomdata",
-		"SM",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 		"Maxtor",
 		"USB to SATA",
@@ -1448,23 +1182,6 @@ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
- * Needed for OneTouch extension to usb-storage
- *
- */
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-	UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
-			"Maxtor",
-			"OneTouch External Harddrive",
-			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-			0),
-	UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
-			"Maxtor",
-			"OneTouch External Harddrive",
-			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-			0),
-#endif
-
 /* Submitted by Joris Struyve <joris@struyve.be> */
 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 		"Medion",
@@ -2117,14 +1834,6 @@ UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
 		"Micro Mini 1GB",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
-		"Sandisk",
-		"ImageMate SDDR55",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
-		US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		"DataStor",
diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_freecom.h
index fbada898d56b..375867942391 100644
--- a/drivers/usb/storage/cypress_atacb.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,8 +1,4 @@
-/*
- * Support for emulating SAT (ata pass through) on devices based
- *       on the Cypress USB/ATA bridge supporting ATACB.
- *
- * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+/* Unusual Devices File for the Freecom USB/IDE adaptor
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -19,7 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _CYPRESS_ATACB_H_
-#define _CYPRESS_ATACB_H_
-extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*);
-#endif
+#if defined(CONFIG_USB_STORAGE_FREECOM) || \
+		defined(CONFIG_USB_STORAGE_FREECOM_MODULE)
+
+UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
+		"Freecom",
+		"USB-IDE",
+		US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
new file mode 100644
index 000000000000..0d99dde3382a
--- /dev/null
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -0,0 +1,57 @@
+/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ISD200) || \
+		defined(CONFIG_USB_STORAGE_ISD200_MODULE)
+
+UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
+		"Sony",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
+		"In-System",
+		"USB/IDE Bridge (ATA/ATAPI)",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
+		"In-System",
+		"Portable USB Harddrive V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
+		"In-System",
+		"USB Storage Adapter V2",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
+		"ATI",
+		"USB Cable 205",
+		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/unusual_jumpshot.h
index a815a0470c84..2e549b1c2c62 100644
--- a/drivers/usb/storage/sddr55.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,10 +1,4 @@
-/* Driver for SanDisk SDDR-55 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2002 Simon Munton
- *
- * See sddr55.c for more explanation
+/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -21,12 +15,13 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_SHUTTLE_EUSB_SDDR55_H
-#define _USB_SHUTTLE_EUSB_SDDR55_H
-
-/* Sandisk SDDR-55 stuff */
+#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
+		defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
 
-extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int sddr55_reset(struct us_data *us);
+UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
+		"Lexar",
+		"Jumpshot USB CF Reader",
+		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+		US_FL_NEED_OVERRIDE),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/unusual_karma.h
index 0a35f4fa78f8..12ae3a03e802 100644
--- a/drivers/usb/storage/isd200.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,11 +1,4 @@
-/* Header File for In-System Design, Inc. ISD200 ASIC
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 In-System Design, Inc. (support@in-system.com)
- *
- * See isd200.c for more information.
+/* Unusual Devices File for the Rio Karma
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -22,10 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_ISD200_H
-#define _USB_ISD200_H
+#if defined(CONFIG_USB_STORAGE_KARMA) || \
+		defined(CONFIG_USB_STORAGE_KARMA_MODULE)
 
-extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us);
-extern int isd200_Initialization(struct us_data *us);
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+		"Rio",
+		"Rio Karma",
+		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
new file mode 100644
index 000000000000..bd9306b637df
--- /dev/null
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -0,0 +1,36 @@
+/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
+		defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
+
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ */
+UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		0),
+
+UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
+		"Maxtor",
+		"OneTouch External Harddrive",
+		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
new file mode 100644
index 000000000000..50cab511a4d7
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -0,0 +1,56 @@
+/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+		defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+		"SCM Microsystems",
+		"eUSB SmartMedia / CompactFlash Adapter",
+		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		0),
+
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
+		"Olympus",
+		"Camedia MAUSB-2",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR-09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
+
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
new file mode 100644
index 000000000000..ae81ef7a1cfd
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -0,0 +1,44 @@
+/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR55) || \
+		defined(CONFIG_USB_STORAGE_SDDR55_MODULE)
+
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+		"Datafab",
+		"MDSM-B reader",
+		US_SC_SCSI, US_PR_SDDR55, NULL,
+		US_FL_FIX_INQUIRY),
+
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+		"Datafab Systems, Inc.",
+		"USB to CF + SM Combo (LC1)",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+		"Acomdata",
+		"SM",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR55",
+		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
new file mode 100644
index 000000000000..80e869f10180
--- /dev/null
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -0,0 +1,43 @@
+/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+		defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ 8200e",
+		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ CD-4e",
+		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
+		"Shuttle/SCM",
+		"USBAT-02",
+		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+		"Sandisk",
+		"ImageMate SDDR-05b",
+		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 4becf495ca2d..8060b85fe1a3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -5,7 +5,7 @@
  *
  * Developed with the assistance of:
  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
- *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
@@ -66,39 +66,6 @@
 #include "debug.h"
 #include "initializers.h"
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-#include "shuttle_usbat.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#include "sddr09.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-#include "sddr55.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_FREECOM
-#include "freecom.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ISD200
-#include "isd200.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#include "datafab.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#include "jumpshot.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-#include "onetouch.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-#include "alauda.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_KARMA
-#include "karma.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-#include "cypress_atacb.h"
-#endif
 #include "sierra_ms.h"
 #include "option_ms.h"
 
@@ -118,36 +85,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 
 /*
  * The entries in this table correspond, line for line,
- * with the entries of us_unusual_dev_list[].
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
-#ifndef CONFIG_USB_LIBUSUAL
-
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV	UNUSUAL_DEV
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = (USB_US_TYPE_STOR<<24) }
-
-static struct usb_device_id storage_usb_ids [] = {
-
-#	include "unusual_devs.h"
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-#undef USUAL_DEV
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE (usb, storage_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/* This is the list of devices we recognize, along with their flag data */
 
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
@@ -179,18 +118,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #	include "unusual_devs.h" 
-#	undef UNUSUAL_DEV
-#	undef COMPLIANT_DEV
-#	undef USUAL_DEV
-
-	/* Terminating entry */
-	{ NULL }
+	{ }		/* Terminating entry */
 };
 
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
-static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -207,8 +145,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
 
-static int storage_resume(struct usb_interface *iface)
+int usb_stor_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -221,8 +160,9 @@ static int storage_resume(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_resume);
 
-static int storage_reset_resume(struct usb_interface *iface)
+int usb_stor_reset_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -235,6 +175,7 @@ static int storage_reset_resume(struct usb_interface *iface)
 	 * the device */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 
 #endif /* CONFIG_PM */
 
@@ -243,7 +184,7 @@ static int storage_reset_resume(struct usb_interface *iface)
  * a USB port reset, whether from this driver or a different one.
  */
 
-static int storage_pre_reset(struct usb_interface *iface)
+int usb_stor_pre_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -253,8 +194,9 @@ static int storage_pre_reset(struct usb_interface *iface)
 	mutex_lock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
 
-static int storage_post_reset(struct usb_interface *iface)
+int usb_stor_post_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -269,6 +211,7 @@ static int storage_post_reset(struct usb_interface *iface)
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 
 /*
  * fill_inquiry_response takes an unsigned char array (which must
@@ -311,6 +254,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
 
 	usb_stor_set_xfer_buf(data, data_len, us->srb);
 }
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
 
 static int usb_stor_control_thread(void * __us)
 {
@@ -551,20 +495,13 @@ static void adjust_quirks(struct us_data *us)
 			vid, pid, f);
 }
 
-/* Find an unusual_dev descriptor (always succeeds in the current code) */
-static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
-{
-	const int id_index = id - storage_usb_ids;
-	return &us_unusual_dev_list[id_index];
-}
-
 /* Get the unusual_devs entries and the string descriptors */
-static int get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
 		&us->pusb_intf->cur_altsetting->desc;
-	struct us_unusual_dev *unusual_dev = find_unusual(id);
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
@@ -629,7 +566,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 }
 
 /* Get the transport settings */
-static int get_transport(struct us_data *us)
+static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
 	case US_PR_CB:
@@ -651,100 +588,11 @@ static int get_transport(struct us_data *us)
 		us->transport = usb_stor_Bulk_transport;
 		us->transport_reset = usb_stor_Bulk_reset;
 		break;
-
-#ifdef CONFIG_USB_STORAGE_USBAT
-	case US_PR_USBAT:
-		us->transport_name = "Shuttle USBAT";
-		us->transport = usbat_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
-	case US_PR_EUSB_SDDR09:
-		us->transport_name = "EUSB/SDDR09";
-		us->transport = sddr09_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR55
-	case US_PR_SDDR55:
-		us->transport_name = "SDDR55";
-		us->transport = sddr55_transport;
-		us->transport_reset = sddr55_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DPCM
-	case US_PR_DPCM_USB:
-		us->transport_name = "Control/Bulk-EUSB/SDDR09";
-		us->transport = dpcm_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-	case US_PR_FREECOM:
-		us->transport_name = "Freecom";
-		us->transport = freecom_transport;
-		us->transport_reset = usb_stor_freecom_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-	case US_PR_DATAFAB:
-		us->transport_name  = "Datafab Bulk-Only";
-		us->transport = datafab_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-	case US_PR_JUMPSHOT:
-		us->transport_name  = "Lexar Jumpshot Control/Bulk";
-		us->transport = jumpshot_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-	case US_PR_ALAUDA:
-		us->transport_name  = "Alauda Control/Bulk";
-		us->transport = alauda_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_KARMA
-	case US_PR_KARMA:
-		us->transport_name = "Rio Karma/Bulk";
-		us->transport = rio_karma_transport;
-		us->transport_reset = usb_stor_Bulk_reset;
-		break;
-#endif
-
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Transport: %s\n", us->transport_name);
-
-	/* fix for single-lun devices */
-	if (us->fflags & US_FL_SINGLE_LUN)
-		us->max_lun = 0;
-	return 0;
 }
 
 /* Get the protocol settings */
-static int get_protocol(struct us_data *us)
+static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
 	case US_SC_RBC:
@@ -779,26 +627,7 @@ static int get_protocol(struct us_data *us)
 		us->protocol_name = "Uniform Floppy Interface (UFI)";
 		us->proto_handler = usb_stor_ufi_command;
 		break;
-
-#ifdef CONFIG_USB_STORAGE_ISD200
-	case US_SC_ISD200:
-		us->protocol_name = "ISD200 ATA/ATAPI";
-		us->proto_handler = isd200_ata_command;
-		break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-	case US_SC_CYP_ATACB:
-		us->protocol_name = "Transparent SCSI with Cypress ATACB";
-		us->proto_handler = cypress_atacb_passthrough;
-		break;
-#endif
-
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Protocol: %s\n", us->protocol_name);
-	return 0;
 }
 
 /* Get the pipe settings */
@@ -846,12 +675,12 @@ static int get_pipes(struct us_data *us)
 	us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 	us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 	us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
-		ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		usb_endpoint_num(ep_out));
 	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 
-		ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		usb_endpoint_num(ep_in));
 	if (ep_int) {
 		us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
-			ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			usb_endpoint_num(ep_int));
 		us->ep_bInterval = ep_int->bInterval;
 	}
 	return 0;
@@ -1012,17 +841,15 @@ static int usb_stor_scan_thread(void * __us)
 }
 
 
-/* Probe to see if we can drive a newly-connected USB device */
-static int storage_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct Scsi_Host *host;
 	struct us_data *us;
 	int result;
-	struct task_struct *th;
-
-	if (usb_usual_check_type(id, USB_US_TYPE_STOR))
-		return -ENXIO;
 
 	US_DEBUGP("USB Mass Storage device detected\n");
 
@@ -1041,7 +868,7 @@ static int storage_probe(struct usb_interface *intf,
 	 * Allow 16-byte CDBs and thus > 2TB
 	 */
 	host->max_cmd_len = 16;
-	us = host_to_us(host);
+	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
 	init_completion(&us->cmnd_ready);
@@ -1054,24 +881,46 @@ static int storage_probe(struct usb_interface *intf,
 	if (result)
 		goto BadDevice;
 
-	/*
-	 * Get the unusual_devs entries and the descriptors
-	 *
-	 * id_index is calculated in the declaration to be the index number
-	 * of the match from the usb_device_id table, so we can find the
-	 * corresponding entry in the private table.
-	 */
-	result = get_device_info(us, id);
+	/* Get the unusual_devs entries and the descriptors */
+	result = get_device_info(us, id, unusual_dev);
 	if (result)
 		goto BadDevice;
 
-	/* Get the transport, protocol, and pipe settings */
-	result = get_transport(us);
-	if (result)
-		goto BadDevice;
-	result = get_protocol(us);
-	if (result)
+	/* Get standard transport and protocol settings */
+	get_transport(us);
+	get_protocol(us);
+
+	/* Give the caller a chance to fill in specialized transport
+	 * or protocol settings.
+	 */
+	return 0;
+
+BadDevice:
+	US_DEBUGP("storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+	struct task_struct *th;
+	int result;
+
+	/* Make sure the transport and protocol have both been set */
+	if (!us->transport || !us->proto_handler) {
+		result = -ENXIO;
 		goto BadDevice;
+	}
+	US_DEBUGP("Transport: %s\n", us->transport_name);
+	US_DEBUGP("Protocol: %s\n", us->protocol_name);
+
+	/* fix for single-lun devices */
+	if (us->fflags & US_FL_SINGLE_LUN)
+		us->max_lun = 0;
+
+	/* Find the endpoints and calculate pipe values */
 	result = get_pipes(us);
 	if (result)
 		goto BadDevice;
@@ -1080,7 +929,7 @@ static int storage_probe(struct usb_interface *intf,
 	result = usb_stor_acquire_resources(us);
 	if (result)
 		goto BadDevice;
-	result = scsi_add_host(host, &intf->dev);
+	result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
 	if (result) {
 		printk(KERN_WARNING USB_STORAGE
 			"Unable to add the scsi host\n");
@@ -1108,9 +957,10 @@ BadDevice:
 	release_everything(us);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
 
-/* Handle a disconnect event from the USB core */
-static void storage_disconnect(struct usb_interface *intf)
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
 {
 	struct us_data *us = usb_get_intfdata(intf);
 
@@ -1118,6 +968,42 @@ static void storage_disconnect(struct usb_interface *intf)
 	quiesce_and_remove_host(us);
 	release_everything(us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	/*
+	 * If libusual is configured, let it decide whether a standard
+	 * device should be handled by usb-storage or by ub.
+	 * If the device isn't standard (is handled by a subdriver
+	 * module) then don't accept it.
+	 */
+	if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
+			usb_usual_ignore_device(intf))
+		return -ENXIO;
+
+	/*
+	 * Call the general probe procedures.
+	 *
+	 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+	 * table, so we use the index of the id entry to find the
+	 * corresponding unusual_devs entry.
+	 */
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usb_storage_usb_ids) + us_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* No special transport or protocol settings in the main module */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
 
 /***********************************************************************
  * Initialization and registration
@@ -1126,15 +1012,13 @@ static void storage_disconnect(struct usb_interface *intf)
 static struct usb_driver usb_storage_driver = {
 	.name =		"usb-storage",
 	.probe =	storage_probe,
-	.disconnect =	storage_disconnect,
-#ifdef CONFIG_PM
-	.suspend =	storage_suspend,
-	.resume =	storage_resume,
-	.reset_resume =	storage_reset_resume,
-#endif
-	.pre_reset =	storage_pre_reset,
-	.post_reset =	storage_post_reset,
-	.id_table =	storage_usb_ids,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usb_storage_usb_ids,
 	.soft_unbind =	1,
 };
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 65e674e4be99..2609efb2bd7e 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
 #endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000000..468bde7d1971
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,116 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+  .driver_info = ((useType)<<24) }
+
+struct usb_device_id usb_storage_usb_ids[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+EXPORT_SYMBOL_GPL(usb_storage_usb_ids);
+
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+	u16	vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{					\
+	.vid	= id_vendor,		\
+	.pid 	= id_product,		\
+	.bcdmin	= bcdDeviceMin,		\
+	.bcdmax = bcdDeviceMax,		\
+}
+
+static struct ignore_entry ignore_ids[] = {
+#	include "unusual_alauda.h"
+#	include "unusual_cypress.h"
+#	include "unusual_datafab.h"
+#	include "unusual_freecom.h"
+#	include "unusual_isd200.h"
+#	include "unusual_jumpshot.h"
+#	include "unusual_karma.h"
+#	include "unusual_onetouch.h"
+#	include "unusual_sddr09.h"
+#	include "unusual_sddr55.h"
+#	include "unusual_usbat.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+	struct usb_device *udev;
+	unsigned vid, pid, bcd;
+	struct ignore_entry *p;
+
+	udev = interface_to_usbdev(intf);
+	vid = le16_to_cpu(udev->descriptor.idVendor);
+	pid = le16_to_cpu(udev->descriptor.idProduct);
+	bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	for (p = ignore_ids; p->vid; ++p) {
+		if (p->vid == vid && p->pid == pid &&
+				p->bcdmin <= bcd && p->bcdmax >= bcd)
+			return -ENXIO;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_usual_ignore_device);