target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors

In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.

1.

The request queue values and what we do are a mismatch of
things:

max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.

discard_granularity - This is in bytes. We are converting it
to Linux block layer 512 byte sectors.

discard_alignment - This is in bytes. We are just copying
this over.

The problem is that the core LIO code exports these values in
spc_emulate_evpd_b0 and we use them to test request arguments
in sbc_execute_unmap, but we never convert to the block size
we export to the initiator. If we are not using 512 byte sectors
then we are exporting the wrong values or are checks are off.
And, for the discard_alignment/bytes case we are just plain messed
up.

2.

blkdev_issue_discard's start and number of sector arguments
are supposed to be in linux block layer 512 byte sectors. We are
currently passing in the values we get from the initiator which
might be based on some other sector size.

There is a similar problem in iblock_execute_write_same where
the bio functions want values in 512 byte sectors but we are
passing in what we got from the initiator.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

1 files changed, 14 insertions, 44 deletions

diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 5a2899f9f50b..abe4eb997a84 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -121,29 +121,11 @@ static int iblock_configure_device(struct se_device *dev)
 	dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
 	dev->dev_attrib.hw_queue_depth = q->nr_requests;
 
-	/*
-	 * Check if the underlying struct block_device request_queue supports
-	 * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
-	 * in ATA and we need to set TPE=1
-	 */
-	if (blk_queue_discard(q)) {
-		dev->dev_attrib.max_unmap_lba_count =
-				q->limits.max_discard_sectors;
-
-		/*
-		 * Currently hardcoded to 1 in Linux/SCSI code..
-		 */
-		dev->dev_attrib.max_unmap_block_desc_count = 1;
-		dev->dev_attrib.unmap_granularity =
-				q->limits.discard_granularity >> 9;
-		dev->dev_attrib.unmap_granularity_alignment =
-				q->limits.discard_alignment;
-		dev->dev_attrib.unmap_zeroes_data =
-				q->limits.discard_zeroes_data;
-
+	if (target_configure_unmap_from_queue(&dev->dev_attrib, q,
+					      dev->dev_attrib.hw_block_size))
 		pr_debug("IBLOCK: BLOCK Discard support available,"
-				" disabled by default\n");
-	}
+			 " disabled by default\n");
+
 	/*
 	 * Enable write same emulation for IBLOCK and use 0xFFFF as
 	 * the smaller WRITE_SAME(10) only has a two-byte block count.
@@ -415,9 +397,13 @@ static sense_reason_t
 iblock_execute_unmap(struct se_cmd *cmd, sector_t lba, sector_t nolb)
 {
 	struct block_device *bdev = IBLOCK_DEV(cmd->se_dev)->ibd_bd;
+	struct se_device *dev = cmd->se_dev;
 	int ret;
 
-	ret = blkdev_issue_discard(bdev, lba, nolb, GFP_KERNEL, 0);
+	ret = blkdev_issue_discard(bdev,
+				   target_to_linux_sector(dev, lba),
+				   target_to_linux_sector(dev,  nolb),
+				   GFP_KERNEL, 0);
 	if (ret < 0) {
 		pr_err("blkdev_issue_discard() failed: %d\n", ret);
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -433,8 +419,10 @@ iblock_execute_write_same(struct se_cmd *cmd)
 	struct scatterlist *sg;
 	struct bio *bio;
 	struct bio_list list;
-	sector_t block_lba = cmd->t_task_lba;
-	sector_t sectors = sbc_get_write_same_sectors(cmd);
+	struct se_device *dev = cmd->se_dev;
+	sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
+	sector_t sectors = target_to_linux_sector(dev,
+					sbc_get_write_same_sectors(cmd));
 
 	if (cmd->prot_op) {
 		pr_err("WRITE_SAME: Protection information with IBLOCK"
@@ -648,12 +636,12 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 		  enum dma_data_direction data_direction)
 {
 	struct se_device *dev = cmd->se_dev;
+	sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
 	struct iblock_req *ibr;
 	struct bio *bio, *bio_start;
 	struct bio_list list;
 	struct scatterlist *sg;
 	u32 sg_num = sgl_nents;
-	sector_t block_lba;
 	unsigned bio_cnt;
 	int rw = 0;
 	int i;
@@ -679,24 +667,6 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 		rw = READ;
 	}
 
-	/*
-	 * Convert the blocksize advertised to the initiator to the 512 byte
-	 * units unconditionally used by the Linux block layer.
-	 */
-	if (dev->dev_attrib.block_size == 4096)
-		block_lba = (cmd->t_task_lba << 3);
-	else if (dev->dev_attrib.block_size == 2048)
-		block_lba = (cmd->t_task_lba << 2);
-	else if (dev->dev_attrib.block_size == 1024)
-		block_lba = (cmd->t_task_lba << 1);
-	else if (dev->dev_attrib.block_size == 512)
-		block_lba = cmd->t_task_lba;
-	else {
-		pr_err("Unsupported SCSI -> BLOCK LBA conversion:"
-				" %u\n", dev->dev_attrib.block_size);
-		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
-	}
-
 	ibr = kzalloc(sizeof(struct iblock_req), GFP_KERNEL);
 	if (!ibr)
 		goto fail;