Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

1 files changed, 198 insertions, 0 deletions

diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h
index 79f8e05d92dd..4399d1873e2d 100644
--- a/drivers/slimbus/slimbus.h
+++ b/drivers/slimbus/slimbus.h
@@ -17,6 +17,8 @@
 
 /* SLIMbus message types. Related to interpretation of message code. */
 #define SLIM_MSG_MT_CORE			0x0
+#define SLIM_MSG_MT_DEST_REFERRED_USER		0x2
+#define SLIM_MSG_MT_SRC_REFERRED_USER		0x6
 
 /*
  * SLIM Broadcast header format
@@ -43,11 +45,28 @@
 #define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS       0x2
 #define SLIM_MSG_MC_REPORT_ABSENT                0xF
 
+/* Data channel management messages */
+#define SLIM_MSG_MC_CONNECT_SOURCE		0x10
+#define SLIM_MSG_MC_CONNECT_SINK		0x11
+#define SLIM_MSG_MC_DISCONNECT_PORT		0x14
+#define SLIM_MSG_MC_CHANGE_CONTENT		0x18
+
 /* Clock pause Reconfiguration messages */
 #define SLIM_MSG_MC_BEGIN_RECONFIGURATION        0x40
 #define SLIM_MSG_MC_NEXT_PAUSE_CLOCK             0x4A
+#define SLIM_MSG_MC_NEXT_DEFINE_CHANNEL          0x50
+#define SLIM_MSG_MC_NEXT_DEFINE_CONTENT          0x51
+#define SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL        0x54
+#define SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL      0x55
+#define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL          0x58
 #define SLIM_MSG_MC_RECONFIGURE_NOW              0x5F
 
+/*
+ * Clock pause flag to indicate that the reconfig message
+ * corresponds to clock pause sequence
+ */
+#define SLIM_MSG_CLK_PAUSE_SEQ_FLG		(1U << 8)
+
 /* Clock pause values per SLIMbus spec */
 #define SLIM_CLK_FAST				0
 #define SLIM_CLK_CONST_PHASE			1
@@ -61,7 +80,15 @@
 /* Standard values per SLIMbus spec needed by controllers and devices */
 #define SLIM_MAX_CLK_GEAR		10
 #define SLIM_MIN_CLK_GEAR		1
+#define SLIM_SLOT_LEN_BITS		4
+
+/* Indicate that the frequency of the flow and the bus frequency are locked */
+#define SLIM_CHANNEL_CONTENT_FL		BIT(7)
 
+/* Standard values per SLIMbus spec needed by controllers and devices */
+#define SLIM_CL_PER_SUPERFRAME		6144
+#define SLIM_SLOTS_PER_SUPERFRAME	(SLIM_CL_PER_SUPERFRAME >> 2)
+#define SLIM_SL_PER_SUPERFRAME		(SLIM_CL_PER_SUPERFRAME >> 2)
 /* Manager's logical address is set to 0xFF per spec */
 #define SLIM_LA_MANAGER 0xFF
 
@@ -160,6 +187,169 @@ struct slim_sched {
 };
 
 /**
+ * enum slim_port_direction: SLIMbus port direction
+ *
+ * @SLIM_PORT_SINK: SLIMbus port is a sink
+ * @SLIM_PORT_SOURCE: SLIMbus port is a source
+ */
+enum slim_port_direction {
+	SLIM_PORT_SINK = 0,
+	SLIM_PORT_SOURCE,
+};
+/**
+ * enum slim_port_state: SLIMbus Port/Endpoint state machine
+ *	according to SLIMbus Spec 2.0
+ * @SLIM_PORT_DISCONNECTED: SLIMbus port is disconnected
+ *	entered from Unconfigure/configured state after
+ *	DISCONNECT_PORT or REMOVE_CHANNEL core command
+ * @SLIM_PORT_UNCONFIGURED: SLIMbus port is in unconfigured state.
+ *	entered from disconnect state after CONNECT_SOURCE/SINK core command
+ * @SLIM_PORT_CONFIGURED: SLIMbus port is in configured state.
+ *	entered from unconfigured state after DEFINE_CHANNEL, DEFINE_CONTENT
+ *	and ACTIVATE_CHANNEL core commands. Ready for data transmission.
+ */
+enum slim_port_state {
+	SLIM_PORT_DISCONNECTED = 0,
+	SLIM_PORT_UNCONFIGURED,
+	SLIM_PORT_CONFIGURED,
+};
+
+/**
+ * enum slim_channel_state: SLIMbus channel state machine used by core.
+ * @SLIM_CH_STATE_DISCONNECTED: SLIMbus channel is disconnected
+ * @SLIM_CH_STATE_ALLOCATED: SLIMbus channel is allocated
+ * @SLIM_CH_STATE_ASSOCIATED: SLIMbus channel is associated with port
+ * @SLIM_CH_STATE_DEFINED: SLIMbus channel parameters are defined
+ * @SLIM_CH_STATE_CONTENT_DEFINED: SLIMbus channel content is defined
+ * @SLIM_CH_STATE_ACTIVE: SLIMbus channel is active and ready for data
+ * @SLIM_CH_STATE_REMOVED: SLIMbus channel is inactive and removed
+ */
+enum slim_channel_state {
+	SLIM_CH_STATE_DISCONNECTED = 0,
+	SLIM_CH_STATE_ALLOCATED,
+	SLIM_CH_STATE_ASSOCIATED,
+	SLIM_CH_STATE_DEFINED,
+	SLIM_CH_STATE_CONTENT_DEFINED,
+	SLIM_CH_STATE_ACTIVE,
+	SLIM_CH_STATE_REMOVED,
+};
+
+/**
+ * enum slim_ch_data_fmt: SLIMbus channel data Type identifiers according to
+ *	Table 60 of SLIMbus Spec 1.01.01
+ * @SLIM_CH_DATA_FMT_NOT_DEFINED: Undefined
+ * @SLIM_CH_DATA_FMT_LPCM_AUDIO: LPCM audio
+ * @SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO: IEC61937 Compressed audio
+ * @SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO: Packed PDM audio
+ */
+enum slim_ch_data_fmt {
+	SLIM_CH_DATA_FMT_NOT_DEFINED = 0,
+	SLIM_CH_DATA_FMT_LPCM_AUDIO = 1,
+	SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO = 2,
+	SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO = 3,
+};
+
+/**
+ * enum slim_ch_aux_fmt: SLIMbus channel Aux Field format IDs according to
+ *	Table 63 of SLIMbus Spec 2.0
+ * @SLIM_CH_AUX_FMT_NOT_APPLICABLE: Undefined
+ * @SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958: ZCUV for tunneling IEC60958
+ * @SLIM_CH_AUX_FMT_USER_DEFINED: User defined
+ */
+enum slim_ch_aux_bit_fmt {
+	SLIM_CH_AUX_FMT_NOT_APPLICABLE = 0,
+	SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958 = 1,
+	SLIM_CH_AUX_FMT_USER_DEFINED = 0xF,
+};
+
+/**
+ * struct slim_channel  - SLIMbus channel, used for state machine
+ *
+ * @id: ID of channel
+ * @prrate: Presense rate of channel from Table 66 of SLIMbus 2.0 Specs
+ * @seg_dist: segment distribution code from Table 20 of SLIMbus 2.0 Specs
+ * @data_fmt: Data format of channel.
+ * @aux_fmt: Aux format for this channel.
+ * @state: channel state machine
+ */
+struct slim_channel {
+	int id;
+	int prrate;
+	int seg_dist;
+	enum slim_ch_data_fmt data_fmt;
+	enum slim_ch_aux_bit_fmt aux_fmt;
+	enum slim_channel_state state;
+};
+
+/**
+ * struct slim_port  - SLIMbus port
+ *
+ * @id: Port id
+ * @direction: Port direction, Source or Sink.
+ * @state: state machine of port.
+ * @ch: channel associated with this port.
+ */
+struct slim_port {
+	int id;
+	enum slim_port_direction direction;
+	enum slim_port_state state;
+	struct slim_channel ch;
+};
+
+/**
+ * enum slim_transport_protocol: SLIMbus Transport protocol list from
+ *	Table 47 of SLIMbus 2.0 specs.
+ * @SLIM_PROTO_ISO: Isochronous Protocol, no flow control as data rate match
+ *		channel rate flow control embedded in the data.
+ * @SLIM_PROTO_PUSH: Pushed Protocol, includes flow control, Used to carry
+ *		data whose rate	is equal to, or lower than the channel rate.
+ * @SLIM_PROTO_PULL: Pulled Protocol, similar usage as pushed protocol
+ *		but pull is a unicast.
+ * @SLIM_PROTO_LOCKED: Locked Protocol
+ * @SLIM_PROTO_ASYNC_SMPLX: Asynchronous Protocol-Simplex
+ * @SLIM_PROTO_ASYNC_HALF_DUP: Asynchronous Protocol-Half-duplex
+ * @SLIM_PROTO_EXT_SMPLX: Extended Asynchronous Protocol-Simplex
+ * @SLIM_PROTO_EXT_HALF_DUP: Extended Asynchronous Protocol-Half-duplex
+ */
+enum slim_transport_protocol {
+	SLIM_PROTO_ISO = 0,
+	SLIM_PROTO_PUSH,
+	SLIM_PROTO_PULL,
+	SLIM_PROTO_LOCKED,
+	SLIM_PROTO_ASYNC_SMPLX,
+	SLIM_PROTO_ASYNC_HALF_DUP,
+	SLIM_PROTO_EXT_SMPLX,
+	SLIM_PROTO_EXT_HALF_DUP,
+};
+
+/**
+ * struct slim_stream_runtime  - SLIMbus stream runtime instance
+ *
+ * @name: Name of the stream
+ * @dev: SLIM Device instance associated with this stream
+ * @direction: direction of stream
+ * @prot: Transport protocol used in this stream
+ * @rate: Data rate of samples *
+ * @bps: bits per sample
+ * @ratem: rate multipler which is super frame rate/data rate
+ * @num_ports: number of ports
+ * @ports: pointer to instance of ports
+ * @node: list head for stream associated with slim device.
+ */
+struct slim_stream_runtime {
+	const char *name;
+	struct slim_device *dev;
+	int direction;
+	enum slim_transport_protocol prot;
+	unsigned int rate;
+	unsigned int bps;
+	unsigned int ratem;
+	int num_ports;
+	struct slim_port *ports;
+	struct list_head node;
+};
+
+/**
  * struct slim_controller  - Controls every instance of SLIMbus
  *				(similar to 'master' on SPI)
  * @dev: Device interface to this driver
@@ -188,6 +378,10 @@ struct slim_sched {
  * @wakeup: This function pointer implements controller-specific procedure
  *	to wake it up from clock-pause. Framework will call this to bring
  *	the controller out of clock pause.
+ * @enable_stream: This function pointer implements controller-specific procedure
+ *	to enable a stream.
+ * @disable_stream: This function pointer implements controller-specific procedure
+ *	to disable stream.
  *
  *	'Manager device' is responsible for  device management, bandwidth
  *	allocation, channel setup, and port associations per channel.
@@ -229,6 +423,8 @@ struct slim_controller {
 					     struct slim_eaddr *ea, u8 laddr);
 	int			(*get_laddr)(struct slim_controller *ctrl,
 					     struct slim_eaddr *ea, u8 *laddr);
+	int		(*enable_stream)(struct slim_stream_runtime *rt);
+	int		(*disable_stream)(struct slim_stream_runtime *rt);
 	int			(*wakeup)(struct slim_controller *ctrl);
 };
 
@@ -240,6 +436,8 @@ int slim_unregister_controller(struct slim_controller *ctrl);
 void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l);
 int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn);
 int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart);
+int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
+void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
 
 static inline bool slim_tid_txn(u8 mt, u8 mc)
 {