isci: Intel(R) C600 Series Chipset Storage Control Unit Driver

Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.

This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.

   git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 1472 insertions, 0 deletions

diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
new file mode 100644
index 000000000000..e564121b6726
--- /dev/null
+++ b/drivers/scsi/isci/request.c
@@ -0,0 +1,1472 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "isci.h"
+#include "scic_remote_device.h"
+#include "scic_io_request.h"
+#include "scic_task_request.h"
+#include "scic_port.h"
+#include "task.h"
+#include "request.h"
+#include "sata.h"
+#include "scu_completion_codes.h"
+
+
+static enum sci_status isci_request_ssp_request_construct(
+	struct isci_request *request)
+{
+	enum sci_status status;
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request = %p\n",
+		__func__,
+		request);
+	status = scic_io_request_construct_basic_ssp(
+		request->sci_request_handle
+		);
+	return status;
+}
+
+static enum sci_status isci_request_stp_request_construct(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+	enum sci_status status;
+	struct host_to_dev_fis *register_fis;
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request = %p\n",
+		__func__,
+		request);
+
+	/* Get the host_to_dev_fis from the core and copy
+	 * the fis from the task into it.
+	 */
+	register_fis = isci_sata_task_to_fis_copy(task);
+
+	status = scic_io_request_construct_basic_sata(
+		request->sci_request_handle
+		);
+
+	/* Set the ncq tag in the fis, from the queue
+	 * command in the task.
+	 */
+	if (isci_sata_is_task_ncq(task)) {
+
+		isci_sata_set_ncq_tag(
+			register_fis,
+			task
+			);
+	}
+
+	return status;
+}
+
+/**
+ * isci_smp_request_build() - This function builds the smp request object.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @request: This parameter points to the isci_request object allocated in the
+ *    request construct function.
+ * @sci_device: This parameter is the handle for the sci core's remote device
+ *    object that is the destination for this request.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static enum sci_status isci_smp_request_build(
+	struct isci_request *request)
+{
+	enum sci_status status = SCI_FAILURE;
+	struct sas_task *task = isci_request_access_task(request);
+
+	void *command_iu_address =
+		scic_io_request_get_command_iu_address(
+			request->sci_request_handle
+			);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request = %p\n",
+		__func__,
+		request);
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: smp_req len = %d\n",
+		__func__,
+		task->smp_task.smp_req.length);
+
+	/* copy the smp_command to the address; */
+	sg_copy_to_buffer(&task->smp_task.smp_req, 1,
+			  (char *)command_iu_address,
+			  sizeof(struct smp_request)
+			  );
+
+	status = scic_io_request_construct_smp(request->sci_request_handle);
+	if (status != SCI_SUCCESS)
+		dev_warn(&request->isci_host->pdev->dev,
+			 "%s: scic_io_request_construct_smp failed with "
+			 "status = %d\n",
+			 __func__,
+			 status);
+
+	return status;
+}
+
+/**
+ * isci_io_request_build() - This function builds the io request object.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @request: This parameter points to the isci_request object allocated in the
+ *    request construct function.
+ * @sci_device: This parameter is the handle for the sci core's remote device
+ *    object that is the destination for this request.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static enum sci_status isci_io_request_build(
+	struct isci_host *isci_host,
+	struct isci_request *request,
+	struct isci_remote_device *isci_device)
+{
+	struct smp_discover_response_protocols dev_protocols;
+	enum sci_status status = SCI_SUCCESS;
+	struct sas_task *task = isci_request_access_task(request);
+	struct scic_sds_remote_device *sci_device =
+		isci_device->sci_device_handle;
+
+	dev_dbg(&isci_host->pdev->dev,
+		"%s: isci_device = 0x%p; request = %p, "
+		"num_scatter = %d\n",
+		__func__,
+		isci_device,
+		request,
+		task->num_scatter);
+
+	/* map the sgl addresses, if present.
+	 * libata does the mapping for sata devices
+	 * before we get the request.
+	 */
+	if (task->num_scatter &&
+	    !sas_protocol_ata(task->task_proto) &&
+	    !(SAS_PROTOCOL_SMP & task->task_proto)) {
+
+		request->num_sg_entries = dma_map_sg(
+			&isci_host->pdev->dev,
+			task->scatter,
+			task->num_scatter,
+			task->data_dir
+			);
+
+		if (request->num_sg_entries == 0)
+			return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+	}
+
+	/* build the common request object. For now,
+	 * we will let the core allocate the IO tag.
+	 */
+	status = scic_io_request_construct(
+		isci_host->core_controller,
+		sci_device,
+		SCI_CONTROLLER_INVALID_IO_TAG,
+		request,
+		request->sci_request_mem_ptr,
+		(struct scic_sds_request **)&request->sci_request_handle
+		);
+
+	if (status != SCI_SUCCESS) {
+		dev_warn(&isci_host->pdev->dev,
+			 "%s: failed request construct\n",
+			 __func__);
+		return SCI_FAILURE;
+	}
+
+	sci_object_set_association(request->sci_request_handle, request);
+
+	/* Determine protocol and call the appropriate basic constructor */
+	scic_remote_device_get_protocols(sci_device, &dev_protocols);
+	if (dev_protocols.u.bits.attached_ssp_target)
+		status = isci_request_ssp_request_construct(request);
+	else if (dev_protocols.u.bits.attached_stp_target)
+		status = isci_request_stp_request_construct(request);
+	else if (dev_protocols.u.bits.attached_smp_target)
+		status = isci_smp_request_build(request);
+	else {
+		dev_warn(&isci_host->pdev->dev,
+			 "%s: unknown protocol\n", __func__);
+		return SCI_FAILURE;
+	}
+
+	return SCI_SUCCESS;
+}
+
+
+/**
+ * isci_request_alloc_core() - This function gets the request object from the
+ *    isci_host dma cache.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @isci_request: This parameter will contain the pointer to the new
+ *    isci_request object.
+ * @isci_device: This parameter is the pointer to the isci remote device object
+ *    that is the destination for this request.
+ * @gfp_flags: This parameter specifies the os allocation flags.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static int isci_request_alloc_core(
+	struct isci_host *isci_host,
+	struct isci_request **isci_request,
+	struct isci_remote_device *isci_device,
+	gfp_t gfp_flags)
+{
+	int ret = 0;
+	dma_addr_t handle;
+	struct isci_request *request;
+
+
+	/* get pointer to dma memory. This actually points
+	 * to both the isci_remote_device object and the
+	 * sci object. The isci object is at the beginning
+	 * of the memory allocated here.
+	 */
+	request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle);
+	if (!request) {
+		dev_warn(&isci_host->pdev->dev,
+			 "%s: dma_pool_alloc returned NULL\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* initialize the request object.	*/
+	spin_lock_init(&request->state_lock);
+	isci_request_change_state(request, allocated);
+	request->sci_request_mem_ptr = ((u8 *)request) +
+				       sizeof(struct isci_request);
+	request->request_daddr = handle;
+	request->isci_host = isci_host;
+	request->isci_device = isci_device;
+	request->io_request_completion = NULL;
+
+	request->request_alloc_size = isci_host->dma_pool_alloc_size;
+	request->num_sg_entries = 0;
+
+	request->complete_in_target = false;
+
+	INIT_LIST_HEAD(&request->completed_node);
+	INIT_LIST_HEAD(&request->dev_node);
+
+	*isci_request = request;
+
+	return ret;
+}
+
+static int isci_request_alloc_io(
+	struct isci_host *isci_host,
+	struct sas_task *task,
+	struct isci_request **isci_request,
+	struct isci_remote_device *isci_device,
+	gfp_t gfp_flags)
+{
+	int retval = isci_request_alloc_core(isci_host, isci_request,
+					     isci_device, gfp_flags);
+
+	if (!retval) {
+		(*isci_request)->ttype_ptr.io_task_ptr = task;
+		(*isci_request)->ttype                 = io_task;
+
+		task->lldd_task = *isci_request;
+	}
+	return retval;
+}
+
+/**
+ * isci_request_alloc_tmf() - This function gets the request object from the
+ *    isci_host dma cache and initializes the relevant fields as a sas_task.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @sas_task: This parameter is the task struct from the upper layer driver.
+ * @isci_request: This parameter will contain the pointer to the new
+ *    isci_request object.
+ * @isci_device: This parameter is the pointer to the isci remote device object
+ *    that is the destination for this request.
+ * @gfp_flags: This parameter specifies the os allocation flags.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+int isci_request_alloc_tmf(
+	struct isci_host *isci_host,
+	struct isci_tmf *isci_tmf,
+	struct isci_request **isci_request,
+	struct isci_remote_device *isci_device,
+	gfp_t gfp_flags)
+{
+	int retval = isci_request_alloc_core(isci_host, isci_request,
+					     isci_device, gfp_flags);
+
+	if (!retval) {
+
+		(*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf;
+		(*isci_request)->ttype = tmf_task;
+	}
+	return retval;
+}
+
+/**
+ * isci_request_signal_device_reset() - This function will set the "device
+ *    needs target reset" flag in the given sas_tasks' task_state_flags, and
+ *    then cause the task to be added into the SCSI error handler queue which
+ *    will eventually be escalated to a target reset.
+ *
+ *
+ */
+static void isci_request_signal_device_reset(
+	struct isci_request *isci_request)
+{
+	unsigned long flags;
+	struct sas_task *task = isci_request_access_task(isci_request);
+
+	dev_dbg(&isci_request->isci_host->pdev->dev,
+		"%s: request=%p, task=%p\n", __func__, isci_request, task);
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	/* Cause this task to be scheduled in the SCSI error handler
+	 * thread.
+	 */
+	sas_task_abort(task);
+}
+
+/**
+ * isci_request_execute() - This function allocates the isci_request object,
+ *    all fills in some common fields.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @sas_task: This parameter is the task struct from the upper layer driver.
+ * @isci_request: This parameter will contain the pointer to the new
+ *    isci_request object.
+ * @gfp_flags: This parameter specifies the os allocation flags.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+int isci_request_execute(
+	struct isci_host *isci_host,
+	struct sas_task *task,
+	struct isci_request **isci_request,
+	gfp_t gfp_flags)
+{
+	int ret = 0;
+	struct scic_sds_remote_device *sci_device;
+	enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+	struct isci_remote_device *isci_device;
+	struct isci_request *request;
+	unsigned long flags;
+
+	isci_device = isci_dev_from_domain_dev(task->dev);
+	sci_device = isci_device->sci_device_handle;
+
+	/* do common allocation and init of request object. */
+	ret = isci_request_alloc_io(
+		isci_host,
+		task,
+		&request,
+		isci_device,
+		gfp_flags
+		);
+
+	if (ret)
+		goto out;
+
+	status = isci_io_request_build(isci_host, request, isci_device);
+	if (status == SCI_SUCCESS) {
+
+		spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+		/* send the request, let the core assign the IO TAG.	*/
+		status = scic_controller_start_io(
+			isci_host->core_controller,
+			sci_device,
+			request->sci_request_handle,
+			SCI_CONTROLLER_INVALID_IO_TAG
+			);
+
+		if (status == SCI_SUCCESS ||
+		    status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+
+			/* Either I/O started OK, or the core has signaled that
+			 * the device needs a target reset.
+			 *
+			 * In either case, hold onto the I/O for later.
+			 *
+			 * Update it's status and add it to the list in the
+			 * remote device object.
+			 */
+			isci_request_change_state(request, started);
+			list_add(&request->dev_node,
+				 &isci_device->reqs_in_process);
+
+			if (status ==
+				SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+				/* Signal libsas that we need the SCSI error
+				 * handler thread to work on this I/O and that
+				 * we want a device reset.
+				 */
+				isci_request_signal_device_reset(request);
+
+				/* Change the status, since we are holding
+				 * the I/O until it is managed by the SCSI
+				 * error handler.
+				 */
+				status = SCI_SUCCESS;
+			}
+		} else
+			dev_warn(&isci_host->pdev->dev,
+				 "%s: failed request start\n",
+				 __func__);
+
+		spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+	} else
+		dev_warn(&isci_host->pdev->dev,
+			 "%s: request_construct failed - status = 0x%x\n",
+			 __func__,
+			 status);
+
+ out:
+	if (status != SCI_SUCCESS) {
+
+		/* release dma memory on failure. */
+		isci_request_free(isci_host, request);
+		request = NULL;
+		ret = SCI_FAILURE;
+	}
+
+	*isci_request = request;
+	return ret;
+}
+
+
+/**
+ * isci_request_process_response_iu() - This function sets the status and
+ *    response iu, in the task struct, from the request object for the upper
+ *    layer driver.
+ * @sas_task: This parameter is the task struct from the upper layer driver.
+ * @resp_iu: This parameter points to the response iu of the completed request.
+ * @dev: This parameter specifies the linux device struct.
+ *
+ * none.
+ */
+static void isci_request_process_response_iu(
+	struct sas_task *task,
+	struct ssp_response_iu *resp_iu,
+	struct device *dev)
+{
+	dev_dbg(dev,
+		"%s: resp_iu = %p "
+		"resp_iu->status = 0x%x,\nresp_iu->datapres = %d "
+		"resp_iu->response_data_len = %x, "
+		"resp_iu->sense_data_len = %x\nrepsonse data: ",
+		__func__,
+		resp_iu,
+		resp_iu->status,
+		resp_iu->datapres,
+		resp_iu->response_data_len,
+		resp_iu->sense_data_len);
+
+	task->task_status.stat = resp_iu->status;
+
+	/* libsas updates the task status fields based on the response iu. */
+	sas_ssp_task_response(dev, task, resp_iu);
+}
+
+/**
+ * isci_request_set_open_reject_status() - This function prepares the I/O
+ *    completion for OPEN_REJECT conditions.
+ * @request: This parameter is the completed isci_request object.
+ * @response_ptr: This parameter specifies the service response for the I/O.
+ * @status_ptr: This parameter specifies the exec status for the I/O.
+ * @complete_to_host_ptr: This parameter specifies the action to be taken by
+ *    the LLDD with respect to completing this request or forcing an abort
+ *    condition on the I/O.
+ * @open_rej_reason: This parameter specifies the encoded reason for the
+ *    abandon-class reject.
+ *
+ * none.
+ */
+static void isci_request_set_open_reject_status(
+	struct isci_request *request,
+	struct sas_task *task,
+	enum service_response *response_ptr,
+	enum exec_status *status_ptr,
+	enum isci_completion_selection *complete_to_host_ptr,
+	enum sas_open_rej_reason open_rej_reason)
+{
+	/* Task in the target is done. */
+	request->complete_in_target       = true;
+	*response_ptr                     = SAS_TASK_UNDELIVERED;
+	*status_ptr                       = SAS_OPEN_REJECT;
+	*complete_to_host_ptr             = isci_perform_normal_io_completion;
+	task->task_status.open_rej_reason = open_rej_reason;
+}
+
+/**
+ * isci_request_handle_controller_specific_errors() - This function decodes
+ *    controller-specific I/O completion error conditions.
+ * @request: This parameter is the completed isci_request object.
+ * @response_ptr: This parameter specifies the service response for the I/O.
+ * @status_ptr: This parameter specifies the exec status for the I/O.
+ * @complete_to_host_ptr: This parameter specifies the action to be taken by
+ *    the LLDD with respect to completing this request or forcing an abort
+ *    condition on the I/O.
+ *
+ * none.
+ */
+static void isci_request_handle_controller_specific_errors(
+	struct isci_remote_device *isci_device,
+	struct isci_request *request,
+	struct sas_task *task,
+	enum service_response *response_ptr,
+	enum exec_status *status_ptr,
+	enum isci_completion_selection *complete_to_host_ptr)
+{
+	unsigned int cstatus;
+
+	cstatus = scic_request_get_controller_status(
+		request->sci_request_handle
+		);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR "
+		"- controller status = 0x%x\n",
+		__func__, request, cstatus);
+
+	/* Decode the controller-specific errors; most
+	 * important is to recognize those conditions in which
+	 * the target may still have a task outstanding that
+	 * must be aborted.
+	 *
+	 * Note that there are SCU completion codes being
+	 * named in the decode below for which SCIC has already
+	 * done work to handle them in a way other than as
+	 * a controller-specific completion code; these are left
+	 * in the decode below for completeness sake.
+	 */
+	switch (cstatus) {
+	case SCU_TASK_DONE_DMASETUP_DIRERR:
+	/* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */
+	case SCU_TASK_DONE_XFERCNT_ERR:
+		/* Also SCU_TASK_DONE_SMP_UFI_ERR: */
+		if (task->task_proto == SAS_PROTOCOL_SMP) {
+			/* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */
+			*response_ptr = SAS_TASK_COMPLETE;
+
+			/* See if the device has been/is being stopped. Note
+			 * that we ignore the quiesce state, since we are
+			 * concerned about the actual device state.
+			 */
+			if ((isci_device->status == isci_stopping) ||
+			    (isci_device->status == isci_stopped))
+				*status_ptr = SAS_DEVICE_UNKNOWN;
+			else
+				*status_ptr = SAS_ABORTED_TASK;
+
+			request->complete_in_target = true;
+
+			*complete_to_host_ptr =
+				isci_perform_normal_io_completion;
+		} else {
+			/* Task in the target is not done. */
+			*response_ptr = SAS_TASK_UNDELIVERED;
+
+			if ((isci_device->status == isci_stopping) ||
+			    (isci_device->status == isci_stopped))
+				*status_ptr = SAS_DEVICE_UNKNOWN;
+			else
+				*status_ptr = SAM_STAT_TASK_ABORTED;
+
+			request->complete_in_target = false;
+
+			*complete_to_host_ptr =
+				isci_perform_error_io_completion;
+		}
+
+		break;
+
+	case SCU_TASK_DONE_CRC_ERR:
+	case SCU_TASK_DONE_NAK_CMD_ERR:
+	case SCU_TASK_DONE_EXCESS_DATA:
+	case SCU_TASK_DONE_UNEXP_FIS:
+	/* Also SCU_TASK_DONE_UNEXP_RESP: */
+	case SCU_TASK_DONE_VIIT_ENTRY_NV:       /* TODO - conditions? */
+	case SCU_TASK_DONE_IIT_ENTRY_NV:        /* TODO - conditions? */
+	case SCU_TASK_DONE_RNCNV_OUTBOUND:      /* TODO - conditions? */
+		/* These are conditions in which the target
+		 * has completed the task, so that no cleanup
+		 * is necessary.
+		 */
+		*response_ptr = SAS_TASK_COMPLETE;
+
+		/* See if the device has been/is being stopped. Note
+		 * that we ignore the quiesce state, since we are
+		 * concerned about the actual device state.
+		 */
+		if ((isci_device->status == isci_stopping) ||
+		    (isci_device->status == isci_stopped))
+			*status_ptr = SAS_DEVICE_UNKNOWN;
+		else
+			*status_ptr = SAS_ABORTED_TASK;
+
+		request->complete_in_target = true;
+
+		*complete_to_host_ptr = isci_perform_normal_io_completion;
+		break;
+
+
+	/* Note that the only open reject completion codes seen here will be
+	 * abandon-class codes; all others are automatically retried in the SCU.
+	 */
+	case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_WRONG_DEST);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION:
+
+		/* Note - the return of AB0 will change when
+		 * libsas implements detection of zone violations.
+		 */
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_RESV_AB0);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_RESV_AB1);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_RESV_AB2);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_RESV_AB3);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_BAD_DESTINATION:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_BAD_DEST);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_STP_NORES);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_EPROTO);
+		break;
+
+	case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED:
+
+		isci_request_set_open_reject_status(
+			request, task, response_ptr, status_ptr,
+			complete_to_host_ptr, SAS_OREJ_CONN_RATE);
+		break;
+
+	case SCU_TASK_DONE_LL_R_ERR:
+	/* Also SCU_TASK_DONE_ACK_NAK_TO: */
+	case SCU_TASK_DONE_LL_PERR:
+	case SCU_TASK_DONE_LL_SY_TERM:
+	/* Also SCU_TASK_DONE_NAK_ERR:*/
+	case SCU_TASK_DONE_LL_LF_TERM:
+	/* Also SCU_TASK_DONE_DATA_LEN_ERR: */
+	case SCU_TASK_DONE_LL_ABORT_ERR:
+	case SCU_TASK_DONE_SEQ_INV_TYPE:
+	/* Also SCU_TASK_DONE_UNEXP_XR: */
+	case SCU_TASK_DONE_XR_IU_LEN_ERR:
+	case SCU_TASK_DONE_INV_FIS_LEN:
+	/* Also SCU_TASK_DONE_XR_WD_LEN: */
+	case SCU_TASK_DONE_SDMA_ERR:
+	case SCU_TASK_DONE_OFFSET_ERR:
+	case SCU_TASK_DONE_MAX_PLD_ERR:
+	case SCU_TASK_DONE_LF_ERR:
+	case SCU_TASK_DONE_SMP_RESP_TO_ERR:  /* Escalate to dev reset? */
+	case SCU_TASK_DONE_SMP_LL_RX_ERR:
+	case SCU_TASK_DONE_UNEXP_DATA:
+	case SCU_TASK_DONE_UNEXP_SDBFIS:
+	case SCU_TASK_DONE_REG_ERR:
+	case SCU_TASK_DONE_SDB_ERR:
+	case SCU_TASK_DONE_TASK_ABORT:
+	default:
+		/* Task in the target is not done. */
+		*response_ptr = SAS_TASK_UNDELIVERED;
+		*status_ptr = SAM_STAT_TASK_ABORTED;
+		request->complete_in_target = false;
+
+		*complete_to_host_ptr = isci_perform_error_io_completion;
+		break;
+	}
+}
+
+/**
+ * isci_task_save_for_upper_layer_completion() - This function saves the
+ *    request for later completion to the upper layer driver.
+ * @host: This parameter is a pointer to the host on which the the request
+ *    should be queued (either as an error or success).
+ * @request: This parameter is the completed request.
+ * @response: This parameter is the response code for the completed task.
+ * @status: This parameter is the status code for the completed task.
+ *
+ * none.
+ */
+static void isci_task_save_for_upper_layer_completion(
+	struct isci_host *host,
+	struct isci_request *request,
+	enum service_response response,
+	enum exec_status status,
+	enum isci_completion_selection task_notification_selection)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+	isci_task_set_completion_status(task, response, status,
+					 task_notification_selection);
+
+
+	/* Tasks aborted specifically by a call to the lldd_abort_task
+	 * function should not be completed to the host in the regular path.
+	 */
+	switch (task_notification_selection) {
+
+	case isci_perform_normal_io_completion:
+
+		/* Normal notification (task_done) */
+		dev_dbg(&host->pdev->dev,
+			"%s: Normal - task = %p, response=%d, status=%d\n",
+			__func__,
+			task,
+			response,
+			status);
+		/* Add to the completed list. */
+		list_add(&request->completed_node,
+			 &host->requests_to_complete);
+		break;
+
+	case isci_perform_aborted_io_completion:
+		/*
+		 * No notification because this request is already
+		 * in the abort path.
+		 */
+		dev_warn(&host->pdev->dev,
+			 "%s: Aborted - task = %p, response=%d, status=%d\n",
+			 __func__,
+			 task,
+			 response,
+			 status);
+		break;
+
+	case isci_perform_error_io_completion:
+		/* Use sas_task_abort */
+		dev_warn(&host->pdev->dev,
+			 "%s: Error - task = %p, response=%d, status=%d\n",
+			 __func__,
+			 task,
+			 response,
+			 status);
+		/* Add to the aborted list. */
+		list_add(&request->completed_node,
+			 &host->requests_to_abort);
+		break;
+
+	default:
+		dev_warn(&host->pdev->dev,
+			 "%s: Unknown - task = %p, response=%d, status=%d\n",
+			 __func__,
+			 task,
+			 response,
+			 status);
+
+		/* Add to the aborted list. */
+		list_add(&request->completed_node,
+			 &host->requests_to_abort);
+		break;
+	}
+}
+
+/**
+ * isci_request_io_request_complete() - This function is called by the sci core
+ *    when an io request completes.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @request: This parameter is the completed isci_request object.
+ * @completion_status: This parameter specifies the completion status from the
+ *    sci core.
+ *
+ * none.
+ */
+void isci_request_io_request_complete(
+	struct        isci_host *isci_host,
+	struct        isci_request *request,
+	enum sci_io_status completion_status)
+{
+	struct sas_task *task = isci_request_access_task(request);
+	struct ssp_response_iu *resp_iu;
+	void *resp_buf;
+	unsigned long task_flags;
+	unsigned long state_flags;
+	struct completion *io_request_completion;
+	struct isci_remote_device *isci_device   = request->isci_device;
+	enum service_response response       = SAS_TASK_UNDELIVERED;
+	enum exec_status status         = SAS_ABORTED_TASK;
+	enum isci_request_status request_status;
+	enum isci_completion_selection complete_to_host
+		= isci_perform_normal_io_completion;
+
+	dev_dbg(&isci_host->pdev->dev,
+		"%s: request = %p, task = %p,\n"
+		"task->data_dir = %d completion_status = 0x%x\n",
+		__func__,
+		request,
+		task,
+		task->data_dir,
+		completion_status);
+
+	spin_lock_irqsave(&request->state_lock, state_flags);
+	request_status = isci_request_get_state(request);
+	spin_unlock_irqrestore(&request->state_lock, state_flags);
+
+	/* Decode the request status.  Note that if the request has been
+	 * aborted by a task management function, we don't care
+	 * what the status is.
+	 */
+	switch (request_status) {
+
+	case aborted:
+		/* "aborted" indicates that the request was aborted by a task
+		 * management function, since once a task management request is
+		 * perfomed by the device, the request only completes because
+		 * of the subsequent driver terminate.
+		 *
+		 * Aborted also means an external thread is explicitly managing
+		 * this request, so that we do not complete it up the stack.
+		 *
+		 * The target is still there (since the TMF was successful).
+		 */
+		request->complete_in_target = true;
+		response = SAS_TASK_COMPLETE;
+
+		/* See if the device has been/is being stopped. Note
+		 * that we ignore the quiesce state, since we are
+		 * concerned about the actual device state.
+		 */
+		if ((isci_device->status == isci_stopping)
+		    || (isci_device->status == isci_stopped)
+		    )
+			status = SAS_DEVICE_UNKNOWN;
+		else
+			status = SAS_ABORTED_TASK;
+
+		complete_to_host = isci_perform_aborted_io_completion;
+		/* This was an aborted request. */
+		break;
+
+	case aborting:
+		/* aborting means that the task management function tried and
+		 * failed to abort the request. We need to note the request
+		 * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the
+		 * target as down.
+		 *
+		 * Aborting also means an external thread is explicitly managing
+		 * this request, so that we do not complete it up the stack.
+		 */
+		request->complete_in_target = true;
+		response = SAS_TASK_UNDELIVERED;
+
+		if ((isci_device->status == isci_stopping) ||
+		    (isci_device->status == isci_stopped))
+			/* The device has been /is being stopped. Note that
+			 * we ignore the quiesce state, since we are
+			 * concerned about the actual device state.
+			 */
+			status = SAS_DEVICE_UNKNOWN;
+		else
+			status = SAS_PHY_DOWN;
+
+		complete_to_host = isci_perform_aborted_io_completion;
+
+		/* This was an aborted request. */
+		break;
+
+	case terminating:
+
+		/* This was an terminated request.  This happens when
+		 * the I/O is being terminated because of an action on
+		 * the device (reset, tear down, etc.), and the I/O needs
+		 * to be completed up the stack.
+		 */
+		request->complete_in_target = true;
+		response = SAS_TASK_UNDELIVERED;
+
+		/* See if the device has been/is being stopped. Note
+		 * that we ignore the quiesce state, since we are
+		 * concerned about the actual device state.
+		 */
+		if ((isci_device->status == isci_stopping) ||
+		    (isci_device->status == isci_stopped))
+			status = SAS_DEVICE_UNKNOWN;
+		else
+			status = SAS_ABORTED_TASK;
+
+		complete_to_host = isci_perform_normal_io_completion;
+
+		/* This was a terminated request. */
+		break;
+
+	default:
+
+		/* This is an active request being completed from the core. */
+		switch (completion_status) {
+
+		case SCI_IO_FAILURE_RESPONSE_VALID:
+			dev_dbg(&isci_host->pdev->dev,
+				"%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n",
+				__func__,
+				request,
+				task);
+
+			if (sas_protocol_ata(task->task_proto)) {
+				resp_buf
+					= scic_stp_io_request_get_d2h_reg_address(
+					request->sci_request_handle
+					);
+				isci_request_process_stp_response(task,
+								  resp_buf
+								  );
+
+			} else if (SAS_PROTOCOL_SSP == task->task_proto) {
+
+				/* crack the iu response buffer. */
+				resp_iu
+					= scic_io_request_get_response_iu_address(
+					request->sci_request_handle
+					);
+
+				isci_request_process_response_iu(task, resp_iu,
+								 &isci_host->pdev->dev
+								 );
+
+			} else if (SAS_PROTOCOL_SMP == task->task_proto) {
+
+				dev_err(&isci_host->pdev->dev,
+					"%s: SCI_IO_FAILURE_RESPONSE_VALID: "
+					"SAS_PROTOCOL_SMP protocol\n",
+					__func__);
+
+			} else
+				dev_err(&isci_host->pdev->dev,
+					"%s: unknown protocol\n", __func__);
+
+			/* use the task status set in the task struct by the
+			 * isci_request_process_response_iu call.
+			 */
+			request->complete_in_target = true;
+			response = task->task_status.resp;
+			status = task->task_status.stat;
+			break;
+
+		case SCI_IO_SUCCESS:
+		case SCI_IO_SUCCESS_IO_DONE_EARLY:
+
+			response = SAS_TASK_COMPLETE;
+			status   = SAM_STAT_GOOD;
+			request->complete_in_target = true;
+
+			if (task->task_proto == SAS_PROTOCOL_SMP) {
+
+				u8 *command_iu_address
+					= scic_io_request_get_command_iu_address(
+					request->sci_request_handle
+					);
+
+				dev_dbg(&isci_host->pdev->dev,
+					"%s: SMP protocol completion\n",
+					__func__);
+
+				sg_copy_from_buffer(
+					&task->smp_task.smp_resp, 1,
+					command_iu_address
+					+ sizeof(struct smp_request),
+					sizeof(struct smp_resp)
+					);
+			} else if (completion_status
+				   == SCI_IO_SUCCESS_IO_DONE_EARLY) {
+
+				/* This was an SSP / STP / SATA transfer.
+				 * There is a possibility that less data than
+				 * the maximum was transferred.
+				 */
+				u32 transferred_length
+					= scic_io_request_get_number_of_bytes_transferred(
+					request->sci_request_handle);
+
+				task->task_status.residual
+					= task->total_xfer_len - transferred_length;
+
+				/* If there were residual bytes, call this an
+				 * underrun.
+				 */
+				if (task->task_status.residual != 0)
+					status = SAS_DATA_UNDERRUN;
+
+				dev_dbg(&isci_host->pdev->dev,
+					"%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n",
+					__func__,
+					status);
+
+			} else
+				dev_dbg(&isci_host->pdev->dev,
+					"%s: SCI_IO_SUCCESS\n",
+					__func__);
+
+			break;
+
+		case SCI_IO_FAILURE_TERMINATED:
+			dev_dbg(&isci_host->pdev->dev,
+				"%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n",
+				__func__,
+				request,
+				task);
+
+			/* The request was terminated explicitly.  No handling
+			 * is needed in the SCSI error handler path.
+			 */
+			request->complete_in_target = true;
+			response = SAS_TASK_UNDELIVERED;
+
+			/* See if the device has been/is being stopped. Note
+			 * that we ignore the quiesce state, since we are
+			 * concerned about the actual device state.
+			 */
+			if ((isci_device->status == isci_stopping) ||
+			    (isci_device->status == isci_stopped))
+				status = SAS_DEVICE_UNKNOWN;
+			else
+				status = SAS_ABORTED_TASK;
+
+			complete_to_host = isci_perform_normal_io_completion;
+			break;
+
+		case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR:
+
+			isci_request_handle_controller_specific_errors(
+				isci_device, request, task, &response, &status,
+				&complete_to_host);
+
+			break;
+
+		case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED:
+			/* This is a special case, in that the I/O completion
+			 * is telling us that the device needs a reset.
+			 * In order for the device reset condition to be
+			 * noticed, the I/O has to be handled in the error
+			 * handler.  Set the reset flag and cause the
+			 * SCSI error thread to be scheduled.
+			 */
+			spin_lock_irqsave(&task->task_state_lock, task_flags);
+			task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+			spin_unlock_irqrestore(&task->task_state_lock, task_flags);
+
+			complete_to_host = isci_perform_error_io_completion;
+			request->complete_in_target = false;
+			break;
+
+		default:
+			/* Catch any otherwise unhandled error codes here. */
+			dev_warn(&isci_host->pdev->dev,
+				 "%s: invalid completion code: 0x%x - "
+				 "isci_request = %p\n",
+				 __func__, completion_status, request);
+
+			response = SAS_TASK_UNDELIVERED;
+
+			/* See if the device has been/is being stopped. Note
+			 * that we ignore the quiesce state, since we are
+			 * concerned about the actual device state.
+			 */
+			if ((isci_device->status == isci_stopping) ||
+			    (isci_device->status == isci_stopped))
+				status = SAS_DEVICE_UNKNOWN;
+			else
+				status = SAS_ABORTED_TASK;
+
+			complete_to_host = isci_perform_error_io_completion;
+			request->complete_in_target = false;
+			break;
+		}
+		break;
+	}
+
+	isci_request_unmap_sgl(request, isci_host->pdev);
+
+	/* Put the completed request on the correct list */
+	isci_task_save_for_upper_layer_completion(isci_host, request, response,
+						  status, complete_to_host
+						  );
+
+	/* complete the io request to the core. */
+	scic_controller_complete_io(
+		isci_host->core_controller,
+		isci_device->sci_device_handle,
+		request->sci_request_handle
+		);
+	/* NULL the request handle so it cannot be completed or
+	 * terminated again, and to cause any calls into abort
+	 * task to recognize the already completed case.
+	 */
+	request->sci_request_handle = NULL;
+
+	/* Only remove the request from the remote device list
+	 * of pending requests if we have not requested error
+	 * handling on this request.
+	 */
+	if (complete_to_host != isci_perform_error_io_completion)
+		list_del_init(&request->dev_node);
+
+
+	/* Save possible completion ptr. */
+	io_request_completion = request->io_request_completion;
+
+	if (io_request_completion) {
+
+		/* This is inherantly a regular I/O request,
+		 * since we are currently in the regular
+		 * I/O completion callback function.
+		 * Signal whoever is waiting that this
+		 * request is complete.
+		 */
+		complete(io_request_completion);
+	}
+
+	isci_host_can_dequeue(isci_host, 1);
+}
+
+/**
+ * isci_request_io_request_get_transfer_length() - This function is called by
+ *    the sci core to retrieve the transfer length for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * length of transfer for specified request.
+ */
+u32 isci_request_io_request_get_transfer_length(struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: total_xfer_len: %d\n",
+		__func__,
+		task->total_xfer_len);
+	return task->total_xfer_len;
+}
+
+
+/**
+ * isci_request_io_request_get_data_direction() - This function is called by
+ *    the sci core to retrieve the data direction for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * data direction for specified request.
+ */
+SCI_IO_REQUEST_DATA_DIRECTION isci_request_io_request_get_data_direction(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+	SCI_IO_REQUEST_DATA_DIRECTION ret;
+
+	switch (task->data_dir) {
+
+	case DMA_FROM_DEVICE:
+		ret = SCI_IO_REQUEST_DATA_IN;
+		dev_dbg(&request->isci_host->pdev->dev,
+			"%s: request=%p, FROM_DEVICE\n",
+			__func__,
+			request);
+		break;
+
+	case DMA_TO_DEVICE:
+		ret = SCI_IO_REQUEST_DATA_OUT;
+		dev_dbg(&request->isci_host->pdev->dev,
+			"%s: request=%p, TO_DEVICE\n",
+			__func__,
+			request);
+		break;
+
+	case DMA_BIDIRECTIONAL:
+	case DMA_NONE:
+	default:
+		ret = SCI_IO_REQUEST_NO_DATA;
+		dev_dbg(&request->isci_host->pdev->dev,
+			"%s: request=%p, unhandled direction case, "
+			"data_dir=%d\n",
+			__func__,
+			request,
+			task->data_dir);
+		break;
+
+	}
+	return ret;
+}
+
+/**
+ * isci_request_sge_get_address_field() - This function is called by the sci
+ *    core to retrieve the address field contents for a given sge.
+ * @request: This parameter is the isci_request object.
+ * @sge_address: This parameter is the sge.
+ *
+ * physical address in the specified sge.
+ */
+dma_addr_t isci_request_sge_get_address_field(
+	struct isci_request *request,
+	void *sge_address)
+{
+	struct sas_task *task = isci_request_access_task(request);
+	dma_addr_t ret;
+	struct isci_host *isci_host = isci_host_from_sas_ha(
+		task->dev->port->ha);
+
+	dev_dbg(&isci_host->pdev->dev,
+		"%s: request = %p, sge_address = %p\n",
+		__func__,
+		request,
+		sge_address);
+
+	if (task->data_dir == PCI_DMA_NONE)
+		return 0;
+
+	/* the case where num_scatter == 0 is special, in that
+	 * task->scatter is the actual buffer address, not an sgl.
+	 * so a map single is required here.
+	 */
+	if ((task->num_scatter == 0) &&
+	    !sas_protocol_ata(task->task_proto)) {
+		ret = dma_map_single(
+			&isci_host->pdev->dev,
+			task->scatter,
+			task->total_xfer_len,
+			task->data_dir
+			);
+		request->zero_scatter_daddr = ret;
+	} else
+		ret = sg_dma_address(((struct scatterlist *)sge_address));
+
+	dev_dbg(&isci_host->pdev->dev,
+		"%s: bus address = %lx\n",
+		__func__,
+		(unsigned long)ret);
+
+	return ret;
+}
+
+
+/**
+ * isci_request_sge_get_length_field() - This function is called by the sci
+ *    core to retrieve the length field contents for a given sge.
+ * @request: This parameter is the isci_request object.
+ * @sge_address: This parameter is the sge.
+ *
+ * length field value in the specified sge.
+ */
+u32 isci_request_sge_get_length_field(
+	struct isci_request *request,
+	void *sge_address)
+{
+	struct sas_task *task = isci_request_access_task(request);
+	int ret;
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request = %p, sge_address = %p\n",
+		__func__,
+		request,
+		sge_address);
+
+	if (task->data_dir == PCI_DMA_NONE)
+		return 0;
+
+	/* the case where num_scatter == 0 is special, in that
+	 * task->scatter is the actual buffer address, not an sgl.
+	 * so we return total_xfer_len here.
+	 */
+	if (task->num_scatter == 0)
+		ret = task->total_xfer_len;
+	else
+		ret = sg_dma_len((struct scatterlist *)sge_address);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: len = %d\n",
+		__func__,
+		ret);
+
+	return ret;
+}
+
+
+/**
+ * isci_request_ssp_io_request_get_cdb_address() - This function is called by
+ *    the sci core to retrieve the cdb address for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * cdb address for specified request.
+ */
+void *isci_request_ssp_io_request_get_cdb_address(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request->task->ssp_task.cdb = %p\n",
+		__func__,
+		task->ssp_task.cdb);
+	return task->ssp_task.cdb;
+}
+
+
+/**
+ * isci_request_ssp_io_request_get_cdb_length() - This function is called by
+ *    the sci core to retrieve the cdb length for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * cdb length for specified request.
+ */
+u32 isci_request_ssp_io_request_get_cdb_length(
+	struct isci_request *request)
+{
+	return 16;
+}
+
+
+/**
+ * isci_request_ssp_io_request_get_lun() - This function is called by the sci
+ *    core to retrieve the lun for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * lun for specified request.
+ */
+u32 isci_request_ssp_io_request_get_lun(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+#ifdef DEBUG
+	int i;
+
+	for (i = 0; i < 8; i++)
+		dev_dbg(&request->isci_host->pdev->dev,
+			"%s: request->task->ssp_task.LUN[%d] = %x\n",
+			__func__, i, request->task->ssp_task.LUN[i]);
+
+#endif
+
+	return task->ssp_task.LUN[0];
+}
+
+
+/**
+ * isci_request_ssp_io_request_get_task_attribute() - This function is called
+ *    by the sci core to retrieve the task attribute for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * task attribute for specified request.
+ */
+u32 isci_request_ssp_io_request_get_task_attribute(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request->task->ssp_task.task_attr = %x\n",
+		__func__,
+		task->ssp_task.task_attr);
+
+	return task->ssp_task.task_attr;
+}
+
+
+/**
+ * isci_request_ssp_io_request_get_command_priority() - This function is called
+ *    by the sci core to retrieve the command priority for a given request.
+ * @request: This parameter is the isci_request object.
+ *
+ * command priority for specified request.
+ */
+u32 isci_request_ssp_io_request_get_command_priority(
+	struct isci_request *request)
+{
+	struct sas_task *task = isci_request_access_task(request);
+
+	dev_dbg(&request->isci_host->pdev->dev,
+		"%s: request->task->ssp_task.task_prio = %x\n",
+		__func__,
+		task->ssp_task.task_prio);
+
+	return task->ssp_task.task_prio;
+}