phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY

Added new structure for overriding tuning parameters in QUSB2 V2 PHY as the
override params are increased due to usage of generic QUSB2 V2 phy table.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 43 insertions, 32 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 70c9da693eec..44841c9550b4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -277,6 +277,28 @@ static const char * const qusb2_phy_vreg_names[] = {
 
 #define QUSB2_NUM_VREGS		ARRAY_SIZE(qusb2_phy_vreg_names)
 
+/* struct override_param - structure holding qusb2 v2 phy overriding param
+ * set override true if the  device tree property exists and read and assign
+ * to value
+ */
+struct override_param {
+	bool override;
+	u8 value;
+};
+
+/*struct override_params - structure holding qusb2 v2 phy overriding params
+ * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register
+ * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register
+ * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register
+ * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
+ */
+struct override_params {
+	struct override_param imp_res_offset;
+	struct override_param hstx_trim;
+	struct override_param preemphasis;
+	struct override_param preemphasis_width;
+};
+
 /**
  * struct qusb2_phy - structure holding qusb2 phy attributes
  *
@@ -292,14 +314,7 @@ static const char * const qusb2_phy_vreg_names[] = {
  * @tcsr: TCSR syscon register map
  * @cell: nvmem cell containing phy tuning value
  *
- * @override_imp_res_offset: PHY should use different rescode offset
- * @imp_res_offset_value: rescode offset to be updated in IMP_CTRL1 register
- * @override_hstx_trim: PHY should use different HSTX o/p current value
- * @hstx_trim_value: HSTX_TRIM value to be updated in TUNE1 register
- * @override_preemphasis: PHY should use different pre-amphasis amplitude
- * @preemphasis_level: Amplitude Pre-Emphasis to be updated in TUNE1 register
- * @override_preemphasis_width: PHY should use different pre-emphasis duration
- * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
+ * @overrides: pointer to structure for all overriding tuning params
  *
  * @cfg: phy config data
  * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
@@ -319,14 +334,7 @@ struct qusb2_phy {
 	struct regmap *tcsr;
 	struct nvmem_cell *cell;
 
-	bool override_imp_res_offset;
-	u8 imp_res_offset_value;
-	bool override_hstx_trim;
-	u8 hstx_trim_value;
-	bool override_preemphasis;
-	u8 preemphasis_level;
-	bool override_preemphasis_width;
-	u8 preemphasis_width;
+	struct override_params overrides;
 
 	const struct qusb2_phy_cfg *cfg;
 	bool has_se_clk_scheme;
@@ -394,24 +402,25 @@ void qcom_qusb2_phy_configure(void __iomem *base,
 static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
 {
 	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	struct override_params *or = &qphy->overrides;
 
-	if (qphy->override_imp_res_offset)
+	if (or->imp_res_offset.override)
 		qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1,
-			     qphy->imp_res_offset_value << IMP_RES_OFFSET_SHIFT,
+		or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT,
 			     IMP_RES_OFFSET_MASK);
 
-	if (qphy->override_hstx_trim)
+	if (or->hstx_trim.override)
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-				 qphy->hstx_trim_value << HSTX_TRIM_SHIFT,
+		or->hstx_trim.value << HSTX_TRIM_SHIFT,
 				 HSTX_TRIM_MASK);
 
-	if (qphy->override_preemphasis)
+	if (or->preemphasis.override)
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-				qphy->preemphasis_level << PREEMPHASIS_EN_SHIFT,
+		or->preemphasis.value << PREEMPHASIS_EN_SHIFT,
 				PREEMPHASIS_EN_MASK);
 
-	if (qphy->override_preemphasis_width) {
-		if (qphy->preemphasis_width ==
+	if (or->preemphasis_width.override) {
+		if (or->preemphasis_width.value ==
 		    QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT)
 			qusb2_setbits(qphy->base,
 				      cfg->regs[QUSB2PHY_PORT_TUNE1],
@@ -796,10 +805,12 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 	int ret, i;
 	int num;
 	u32 value;
+	struct override_params *or;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
 	if (!qphy)
 		return -ENOMEM;
+	or = &qphy->overrides;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	qphy->base = devm_ioremap_resource(dev, res);
@@ -864,26 +875,26 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 
 	if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value",
 				  &value)) {
-		qphy->imp_res_offset_value = (u8)value;
-		qphy->override_imp_res_offset = true;
+		or->imp_res_offset.value = (u8)value;
+		or->imp_res_offset.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value",
 				  &value)) {
-		qphy->hstx_trim_value = (u8)value;
-		qphy->override_hstx_trim = true;
+		or->hstx_trim.value = (u8)value;
+		or->hstx_trim.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level",
 				     &value)) {
-		qphy->preemphasis_level = (u8)value;
-		qphy->override_preemphasis = true;
+		or->preemphasis.value = (u8)value;
+		or->preemphasis.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width",
 				     &value)) {
-		qphy->preemphasis_width = (u8)value;
-		qphy->override_preemphasis_width = true;
+		or->preemphasis_width.value = (u8)value;
+		or->preemphasis_width.override = true;
 	}
 
 	pm_runtime_set_active(dev);