Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf7fdf58384bb06df634f7531ca3a97e.

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 33 insertions, 25 deletions

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d98aa56710a9..2aa7b2e60046 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -253,36 +253,20 @@ static int at803x_config_init(struct phy_device *phydev)
 	 *   after HW reset: RX delay enabled and TX delay disabled
 	 *   after SW reset: RX delay enabled, while TX delay retains the
 	 *   value before reset.
-	 *
-	 * So let's first disable the RX and TX delays in PHY and enable
-	 * them based on the mode selected (this also takes care of RGMII
-	 * mode where we expect delays to be disabled)
 	 */
-
-	ret = at803x_disable_rx_delay(phydev);
-	if (ret < 0)
-		return ret;
-	ret = at803x_disable_tx_delay(phydev);
-	if (ret < 0)
-		return ret;
-
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
-		/* If RGMII_ID or RGMII_RXID are specified enable RX delay,
-		 * otherwise keep it disabled
-		 */
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 		ret = at803x_enable_rx_delay(phydev);
-		if (ret < 0)
-			return ret;
-	}
+	else
+		ret = at803x_disable_rx_delay(phydev);
+	if (ret < 0)
+		return ret;
 
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
-		/* If RGMII_ID or RGMII_TXID are specified enable TX delay,
-		 * otherwise keep it disabled
-		 */
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 		ret = at803x_enable_tx_delay(phydev);
-	}
+	else
+		ret = at803x_disable_tx_delay(phydev);
 
 	return ret;
 }
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index b9d4145781ca..58bb25e4af10 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -219,6 +219,20 @@ int genphy_c45_read_link(struct phy_device *phydev)
 	int val, devad;
 	bool link = true;
 
+	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+		if (val < 0)
+			return val;
+
+		/* Autoneg is being started, therefore disregard current
+		 * link status and report link as down.
+		 */
+		if (val & MDIO_AN_CTRL1_RESTART) {
+			phydev->link = 0;
+			return 0;
+		}
+	}
+
 	while (mmd_mask && link) {
 		devad = __ffs(mmd_mask);
 		mmd_mask &= ~BIT(devad);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d5db7604d7c4..d347ddcac45b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1741,7 +1741,17 @@ EXPORT_SYMBOL(genphy_aneg_done);
  */
 int genphy_update_link(struct phy_device *phydev)
 {
-	int status;
+	int status = 0, bmcr;
+
+	bmcr = phy_read(phydev, MII_BMCR);
+	if (bmcr < 0)
+		return bmcr;
+
+	/* Autoneg is being started, therefore disregard BMSR value and
+	 * report link as down.
+	 */
+	if (bmcr & BMCR_ANRESTART)
+		goto done;
 
 	/* The link state is latched low so that momentary link
 	 * drops can be detected. Do not double-read the status