Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 270 insertions, 147 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e5b6cb1a77f9..b33e55a7364e 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -242,11 +242,11 @@ unsigned int phy_supported_speeds(struct phy_device *phy,
  *
  * Description: Returns true if there is a valid setting, false otherwise.
  */
-static inline bool phy_check_valid(int speed, int duplex,
-				   unsigned long *features)
+bool phy_check_valid(int speed, int duplex, unsigned long *features)
 {
 	return !!phy_lookup_setting(speed, duplex, features, true);
 }
+EXPORT_SYMBOL(phy_check_valid);
 
 /**
  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
@@ -544,6 +544,198 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
 EXPORT_SYMBOL(phy_ethtool_get_stats);
 
 /**
+ * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: where to store the retrieved configuration
+ *
+ * Retrieve the PLCA configuration from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
+			     struct phy_plca_cfg *plca_cfg)
+{
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
+ * plca_check_valid - Check PLCA configuration before enabling
+ * @phydev: the phy_device struct
+ * @plca_cfg: current PLCA configuration
+ * @extack: extack for reporting useful error messages
+ *
+ * Checks whether the PLCA and PHY configuration are consistent and it is safe
+ * to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY
+ * configuration is not consistent.
+ */
+static int plca_check_valid(struct phy_device *phydev,
+			    const struct phy_plca_cfg *plca_cfg,
+			    struct netlink_ext_ack *extack)
+{
+	int ret = 0;
+
+	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+			       phydev->advertising)) {
+		ret = -EOPNOTSUPP;
+		NL_SET_ERR_MSG(extack,
+			       "Point to Multi-Point mode is not enabled");
+	} else if (plca_cfg->node_id >= 255) {
+		NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: new PLCA configuration to apply
+ * @extack: extack for reporting useful error messages
+ *
+ * Sets the PLCA configuration in the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
+			     const struct phy_plca_cfg *plca_cfg,
+			     struct netlink_ext_ack *extack)
+{
+	struct phy_plca_cfg *curr_plca_cfg;
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->set_plca_cfg ||
+	    !phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
+	if (!curr_plca_cfg) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+
+	ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+	if (ret)
+		goto out_drv;
+
+	if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'enable' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'local node ID' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'node count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'TO timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	// if enabling PLCA, perform a few sanity checks
+	if (plca_cfg->enabled > 0) {
+		// allow setting node_id concurrently with enabled
+		if (plca_cfg->node_id >= 0)
+			curr_plca_cfg->node_id = plca_cfg->node_id;
+
+		ret = plca_check_valid(phydev, curr_plca_cfg, extack);
+		if (ret)
+			goto out_drv;
+	}
+
+	ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+
+out_drv:
+	kfree(curr_plca_cfg);
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
+ * phy_ethtool_get_plca_status - Get PLCA RS status information
+ * @phydev: the phy_device struct
+ * @plca_st: where to store the retrieved status information
+ *
+ * Retrieve the PLCA status information from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
+				struct phy_plca_status *plca_st)
+{
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_status) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_status(phydev, plca_st);
+
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+}
+
+/**
  * phy_start_cable_test - Start a cable test
  *
  * @phydev: the phy_device struct
@@ -877,27 +1069,35 @@ EXPORT_SYMBOL(phy_ethtool_ksettings_set);
 int phy_speed_down(struct phy_device *phydev, bool sync)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
-	int ret;
+	int ret = 0;
+
+	mutex_lock(&phydev->lock);
 
 	if (phydev->autoneg != AUTONEG_ENABLE)
-		return 0;
+		goto out;
 
 	linkmode_copy(adv_tmp, phydev->advertising);
 
 	ret = phy_speed_down_core(phydev);
 	if (ret)
-		return ret;
+		goto out;
 
 	linkmode_copy(phydev->adv_old, adv_tmp);
 
-	if (linkmode_equal(phydev->advertising, adv_tmp))
-		return 0;
+	if (linkmode_equal(phydev->advertising, adv_tmp)) {
+		ret = 0;
+		goto out;
+	}
 
 	ret = phy_config_aneg(phydev);
 	if (ret)
-		return ret;
+		goto out;
+
+	ret = sync ? phy_poll_aneg_done(phydev) : 0;
+out:
+	mutex_unlock(&phydev->lock);
 
-	return sync ? phy_poll_aneg_done(phydev) : 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(phy_speed_down);
 
@@ -910,21 +1110,28 @@ EXPORT_SYMBOL_GPL(phy_speed_down);
 int phy_speed_up(struct phy_device *phydev)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
+	int ret = 0;
+
+	mutex_lock(&phydev->lock);
 
 	if (phydev->autoneg != AUTONEG_ENABLE)
-		return 0;
+		goto out;
 
 	if (linkmode_empty(phydev->adv_old))
-		return 0;
+		goto out;
 
 	linkmode_copy(adv_tmp, phydev->advertising);
 	linkmode_copy(phydev->advertising, phydev->adv_old);
 	linkmode_zero(phydev->adv_old);
 
 	if (linkmode_equal(phydev->advertising, adv_tmp))
-		return 0;
+		goto out;
+
+	ret = phy_config_aneg(phydev);
+out:
+	mutex_unlock(&phydev->lock);
 
-	return phy_config_aneg(phydev);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(phy_speed_up);
 
@@ -1265,30 +1472,6 @@ void phy_mac_interrupt(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_mac_interrupt);
 
-static void mmd_eee_adv_to_linkmode(unsigned long *advertising, u16 eee_adv)
-{
-	linkmode_zero(advertising);
-
-	if (eee_adv & MDIO_EEE_100TX)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-				 advertising);
-	if (eee_adv & MDIO_EEE_1000T)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-				 advertising);
-	if (eee_adv & MDIO_EEE_10GT)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-				 advertising);
-	if (eee_adv & MDIO_EEE_1000KX)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
-				 advertising);
-	if (eee_adv & MDIO_EEE_10GKX4)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
-				 advertising);
-	if (eee_adv & MDIO_EEE_10GKR)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
-				 advertising);
-}
-
 /**
  * phy_init_eee - init and check the EEE feature
  * @phydev: target phy_device struct
@@ -1301,62 +1484,25 @@ static void mmd_eee_adv_to_linkmode(unsigned long *advertising, u16 eee_adv)
  */
 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 {
+	int ret;
+
 	if (!phydev->drv)
 		return -EIO;
 
-	/* According to 802.3az,the EEE is supported only in full duplex-mode.
-	 */
-	if (phydev->duplex == DUPLEX_FULL) {
-		__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
-		__ETHTOOL_DECLARE_LINK_MODE_MASK(lp);
-		__ETHTOOL_DECLARE_LINK_MODE_MASK(adv);
-		int eee_lp, eee_cap, eee_adv;
-		int status;
-		u32 cap;
-
-		/* Read phy status to properly get the right settings */
-		status = phy_read_status(phydev);
-		if (status)
-			return status;
-
-		/* First check if the EEE ability is supported */
-		eee_cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
-		if (eee_cap <= 0)
-			goto eee_exit_err;
-
-		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
-		if (!cap)
-			goto eee_exit_err;
-
-		/* Check which link settings negotiated and verify it in
-		 * the EEE advertising registers.
-		 */
-		eee_lp = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
-		if (eee_lp <= 0)
-			goto eee_exit_err;
-
-		eee_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-		if (eee_adv <= 0)
-			goto eee_exit_err;
-
-		mmd_eee_adv_to_linkmode(adv, eee_adv);
-		mmd_eee_adv_to_linkmode(lp, eee_lp);
-		linkmode_and(common, adv, lp);
-
-		if (!phy_check_valid(phydev->speed, phydev->duplex, common))
-			goto eee_exit_err;
+	ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return -EPROTONOSUPPORT;
 
-		if (clk_stop_enable)
-			/* Configure the PHY to stop receiving xMII
-			 * clock while it is signaling LPI.
-			 */
-			phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
-					 MDIO_PCS_CTRL1_CLKSTOP_EN);
+	if (clk_stop_enable)
+		/* Configure the PHY to stop receiving xMII
+		 * clock while it is signaling LPI.
+		 */
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+				       MDIO_PCS_CTRL1_CLKSTOP_EN);
 
-		return 0; /* EEE supported */
-	}
-eee_exit_err:
-	return -EPROTONOSUPPORT;
+	return ret < 0 ? ret : 0;
 }
 EXPORT_SYMBOL(phy_init_eee);
 
@@ -1369,10 +1515,16 @@ EXPORT_SYMBOL(phy_init_eee);
  */
 int phy_get_eee_err(struct phy_device *phydev)
 {
+	int ret;
+
 	if (!phydev->drv)
 		return -EIO;
 
-	return phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
+	mutex_lock(&phydev->lock);
+	ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
 }
 EXPORT_SYMBOL(phy_get_eee_err);
 
@@ -1386,33 +1538,16 @@ EXPORT_SYMBOL(phy_get_eee_err);
  */
 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
-	int val;
+	int ret;
 
 	if (!phydev->drv)
 		return -EIO;
 
-	/* Get Supported EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
-	if (val < 0)
-		return val;
-	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
-
-	/* Get advertisement EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (val < 0)
-		return val;
-	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
-	data->eee_enabled = !!data->advertised;
-
-	/* Get LP advertisement EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
-	if (val < 0)
-		return val;
-	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
-
-	data->eee_active = !!(data->advertised & data->lp_advertised);
+	mutex_lock(&phydev->lock);
+	ret = genphy_c45_ethtool_get_eee(phydev, data);
+	mutex_unlock(&phydev->lock);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_get_eee);
 
@@ -1425,43 +1560,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
  */
 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
-	int cap, old_adv, adv = 0, ret;
+	int ret;
 
 	if (!phydev->drv)
 		return -EIO;
 
-	/* Get Supported EEE */
-	cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
-	if (cap < 0)
-		return cap;
-
-	old_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (old_adv < 0)
-		return old_adv;
-
-	if (data->eee_enabled) {
-		adv = !data->advertised ? cap :
-		      ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
-		/* Mask prohibited EEE modes */
-		adv &= ~phydev->eee_broken_modes;
-	}
-
-	if (old_adv != adv) {
-		ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
-		if (ret < 0)
-			return ret;
-
-		/* Restart autonegotiation so the new modes get sent to the
-		 * link partner.
-		 */
-		if (phydev->autoneg == AUTONEG_ENABLE) {
-			ret = phy_restart_aneg(phydev);
-			if (ret < 0)
-				return ret;
-		}
-	}
+	mutex_lock(&phydev->lock);
+	ret = genphy_c45_ethtool_set_eee(phydev, data);
+	mutex_unlock(&phydev->lock);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);
 
@@ -1473,8 +1581,15 @@ EXPORT_SYMBOL(phy_ethtool_set_eee);
  */
 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
 {
-	if (phydev->drv && phydev->drv->set_wol)
-		return phydev->drv->set_wol(phydev, wol);
+	int ret;
+
+	if (phydev->drv && phydev->drv->set_wol) {
+		mutex_lock(&phydev->lock);
+		ret = phydev->drv->set_wol(phydev, wol);
+		mutex_unlock(&phydev->lock);
+
+		return ret;
+	}
 
 	return -EOPNOTSUPP;
 }
@@ -1488,8 +1603,11 @@ EXPORT_SYMBOL(phy_ethtool_set_wol);
  */
 void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
 {
-	if (phydev->drv && phydev->drv->get_wol)
+	if (phydev->drv && phydev->drv->get_wol) {
+		mutex_lock(&phydev->lock);
 		phydev->drv->get_wol(phydev, wol);
+		mutex_unlock(&phydev->lock);
+	}
 }
 EXPORT_SYMBOL(phy_ethtool_get_wol);
 
@@ -1526,6 +1644,7 @@ EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
 int phy_ethtool_nway_reset(struct net_device *ndev)
 {
 	struct phy_device *phydev = ndev->phydev;
+	int ret;
 
 	if (!phydev)
 		return -ENODEV;
@@ -1533,6 +1652,10 @@ int phy_ethtool_nway_reset(struct net_device *ndev)
 	if (!phydev->drv)
 		return -EIO;
 
-	return phy_restart_aneg(phydev);
+	mutex_lock(&phydev->lock);
+	ret = phy_restart_aneg(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_nway_reset);