Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

7 files changed, 17 insertions, 17 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 9659ce5b0712..f3d2b2b3bad5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -2216,7 +2216,7 @@ int qed_resc_alloc(struct qed_dev *cdev)
 		}
 
 		/* CID map / ILT shadow table / T2
-		 * The talbes sizes are determined by the computations above
+		 * The table sizes are determined by the computations above
 		 */
 		rc = qed_cxt_tables_alloc(p_hwfn);
 		if (rc)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ptp.c b/drivers/net/ethernet/qlogic/qed/qed_ptp.c
index 295ce435a1a4..4df8a97b717e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ptp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ptp.c
@@ -307,7 +307,7 @@ static int qed_ptp_hw_adjfreq(struct qed_dev *cdev, s32 ppb)
 	} else if (ppb == 1) {
 		/* This is a special case as its the only value which wouldn't
 		 * fit in a s64 variable. In order to prevent castings simple
-		 * handle it seperately.
+		 * handle it separately.
 		 */
 		best_val = 4;
 		best_period = 0xee6b27f;
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
index e50e1df0a433..23982704273c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
@@ -1168,8 +1168,11 @@ static int qede_set_phys_id(struct net_device *dev,
 	return 0;
 }
 
-static int qede_get_rss_flags(struct qede_dev *edev, struct ethtool_rxnfc *info)
+static int qede_get_rxfh_fields(struct net_device *dev,
+				struct ethtool_rxfh_fields *info)
 {
+	struct qede_dev *edev = netdev_priv(dev);
+
 	info->data = RXH_IP_SRC | RXH_IP_DST;
 
 	switch (info->flow_type) {
@@ -1206,9 +1209,6 @@ static int qede_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
 	case ETHTOOL_GRXRINGS:
 		info->data = QEDE_RSS_COUNT(edev);
 		break;
-	case ETHTOOL_GRXFH:
-		rc = qede_get_rss_flags(edev, info);
-		break;
 	case ETHTOOL_GRXCLSRLCNT:
 		info->rule_cnt = qede_get_arfs_filter_count(edev);
 		info->data = QEDE_RFS_MAX_FLTR;
@@ -1227,14 +1227,17 @@ static int qede_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
 	return rc;
 }
 
-static int qede_set_rss_flags(struct qede_dev *edev, struct ethtool_rxnfc *info)
+static int qede_set_rxfh_fields(struct net_device *dev,
+				const struct ethtool_rxfh_fields *info,
+				struct netlink_ext_ack *extack)
 {
 	struct qed_update_vport_params *vport_update_params;
+	struct qede_dev *edev = netdev_priv(dev);
 	u8 set_caps = 0, clr_caps = 0;
 	int rc = 0;
 
 	DP_VERBOSE(edev, QED_MSG_DEBUG,
-		   "Set rss flags command parameters: flow type = %d, data = %llu\n",
+		   "Set rss flags command parameters: flow type = %d, data = %u\n",
 		   info->flow_type, info->data);
 
 	switch (info->flow_type) {
@@ -1337,9 +1340,6 @@ static int qede_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info)
 	int rc;
 
 	switch (info->cmd) {
-	case ETHTOOL_SRXFH:
-		rc = qede_set_rss_flags(edev, info);
-		break;
 	case ETHTOOL_SRXCLSRLINS:
 		rc = qede_add_cls_rule(edev, info);
 		break;
@@ -2293,6 +2293,8 @@ static const struct ethtool_ops qede_ethtool_ops = {
 	.get_rxfh_key_size		= qede_get_rxfh_key_size,
 	.get_rxfh			= qede_get_rxfh,
 	.set_rxfh			= qede_set_rxfh,
+	.get_rxfh_fields		= qede_get_rxfh_fields,
+	.set_rxfh_fields		= qede_set_rxfh_fields,
 	.get_ts_info			= qede_get_ts_info,
 	.get_channels			= qede_get_channels,
 	.set_channels			= qede_set_channels,
@@ -2335,6 +2337,8 @@ static const struct ethtool_ops qede_vf_ethtool_ops = {
 	.get_rxfh_key_size		= qede_get_rxfh_key_size,
 	.get_rxfh			= qede_get_rxfh,
 	.set_rxfh			= qede_set_rxfh,
+	.get_rxfh_fields		= qede_get_rxfh_fields,
+	.set_rxfh_fields		= qede_set_rxfh_fields,
 	.get_channels			= qede_get_channels,
 	.set_channels			= qede_set_channels,
 	.get_per_queue_coalesce		= qede_get_per_coalesce,
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 985026dd816f..7e341e026489 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -987,20 +987,17 @@ static int qede_udp_tunnel_sync(struct net_device *dev, unsigned int table)
 
 static const struct udp_tunnel_nic_info qede_udp_tunnels_both = {
 	.sync_table	= qede_udp_tunnel_sync,
-	.flags		= UDP_TUNNEL_NIC_INFO_MAY_SLEEP,
 	.tables		= {
 		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN,  },
 		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_GENEVE, },
 	},
 }, qede_udp_tunnels_vxlan = {
 	.sync_table	= qede_udp_tunnel_sync,
-	.flags		= UDP_TUNNEL_NIC_INFO_MAY_SLEEP,
 	.tables		= {
 		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN,  },
 	},
 }, qede_udp_tunnels_geneve = {
 	.sync_table	= qede_udp_tunnel_sync,
-	.flags		= UDP_TUNNEL_NIC_INFO_MAY_SLEEP,
 	.tables		= {
 		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_GENEVE, },
 	},
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index aee4e63b4b82..fca94a69c777 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -1501,7 +1501,7 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev)
 				     "Remote error detected. Calling ql_port_start()\n");
 			/*
 			 * ql_port_start() is shared code and needs
-			 * to lock the PHY on it's own.
+			 * to lock the PHY on its own.
 			 */
 			ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
 			if (ql_port_start(qdev))	/* Restart port */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index b733374b4dc5..6145252d8ff8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2051,7 +2051,7 @@ static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev)
 		dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
 }
 
-/* POST FW related definations*/
+/* POST FW related definitions*/
 #define QLC_83XX_POST_SIGNATURE_REG	0x41602014
 #define QLC_83XX_POST_MODE_REG		0x41602018
 #define QLC_83XX_POST_FAST_MODE		0
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index eb69121df726..53cdd36c4123 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -486,7 +486,6 @@ static int qlcnic_udp_tunnel_sync(struct net_device *dev, unsigned int table)
 
 static const struct udp_tunnel_nic_info qlcnic_udp_tunnels = {
 	.sync_table	= qlcnic_udp_tunnel_sync,
-	.flags		= UDP_TUNNEL_NIC_INFO_MAY_SLEEP,
 	.tables		= {
 		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
 	},