Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...

1 files changed, 8 insertions, 20 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_display_driver.c b/drivers/gpu/drm/i915/display/intel_display_driver.c
index 87dd07e0d138..89bd032ed995 100644
--- a/drivers/gpu/drm/i915/display/intel_display_driver.c
+++ b/drivers/gpu/drm/i915/display/intel_display_driver.c
@@ -11,6 +11,7 @@
 #include <acpi/video.h>
 #include <drm/display/drm_dp_mst_helper.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_client.h>
 #include <drm/drm_mode_config.h>
 #include <drm/drm_privacy_screen_consumer.h>
 #include <drm/drm_probe_helper.h>
@@ -98,7 +99,6 @@ void intel_display_driver_init_hw(struct drm_i915_private *i915)
 static const struct drm_mode_config_funcs intel_mode_funcs = {
 	.fb_create = intel_user_framebuffer_create,
 	.get_format_info = intel_fb_get_format_info,
-	.output_poll_changed = intel_fbdev_output_poll_changed,
 	.mode_valid = intel_mode_valid,
 	.atomic_check = intel_atomic_check,
 	.atomic_commit = intel_atomic_commit,
@@ -198,11 +198,13 @@ void intel_display_driver_early_probe(struct drm_i915_private *i915)
 	intel_dpll_init_clock_hook(i915);
 	intel_init_display_hooks(i915);
 	intel_fdi_init_hook(i915);
+	intel_dmc_wl_init(&i915->display);
 }
 
 /* part #1: call before irq install */
 int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
 {
+	struct intel_display *display = &i915->display;
 	int ret;
 
 	if (i915_inject_probe_failure(i915))
@@ -261,7 +263,7 @@ int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
 	if (ret)
 		goto cleanup_vga_client_pw_domain_dmc;
 
-	intel_init_quirks(i915);
+	intel_init_quirks(display);
 
 	intel_fbc_init(i915);
 
@@ -514,10 +516,6 @@ int intel_display_driver_probe(struct drm_i915_private *i915)
 
 	intel_overlay_setup(i915);
 
-	ret = intel_fbdev_init(&i915->drm);
-	if (ret)
-		return ret;
-
 	/* Only enable hotplug handling once the fbdev is fully set up. */
 	intel_hpd_init(i915);
 
@@ -545,16 +543,6 @@ void intel_display_driver_register(struct drm_i915_private *i915)
 	intel_display_debugfs_register(i915);
 
 	/*
-	 * Some ports require correctly set-up hpd registers for
-	 * detection to work properly (leading to ghost connected
-	 * connector status), e.g. VGA on gm45.  Hence we can only set
-	 * up the initial fbdev config after hpd irqs are fully
-	 * enabled. We do it last so that the async config cannot run
-	 * before the connectors are registered.
-	 */
-	intel_fbdev_initial_config_async(i915);
-
-	/*
 	 * We need to coordinate the hotplugs with the asynchronous
 	 * fbdev configuration, for which we use the
 	 * fbdev->async_cookie.
@@ -562,6 +550,8 @@ void intel_display_driver_register(struct drm_i915_private *i915)
 	drm_kms_helper_poll_init(&i915->drm);
 	intel_hpd_poll_disable(i915);
 
+	intel_fbdev_setup(i915);
+
 	intel_display_device_info_print(DISPLAY_INFO(i915),
 					DISPLAY_RUNTIME_INFO(i915), &p);
 }
@@ -597,9 +587,6 @@ void intel_display_driver_remove_noirq(struct drm_i915_private *i915)
 	 */
 	intel_hpd_poll_fini(i915);
 
-	/* poll work can call into fbdev, hence clean that up afterwards */
-	intel_fbdev_fini(i915);
-
 	intel_unregister_dsm_handler();
 
 	/* flush any delayed tasks or pending work */
@@ -638,7 +625,8 @@ void intel_display_driver_unregister(struct drm_i915_private *i915)
 	if (!HAS_DISPLAY(i915))
 		return;
 
-	intel_fbdev_unregister(i915);
+	drm_client_dev_unregister(&i915->drm);
+
 	/*
 	 * After flushing the fbdev (incl. a late async config which
 	 * will have delayed queuing of a hotplug event), then flush