Merge tag 'drm-misc-next-2019-10-09-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.5:

UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
    not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)

Cross-subsystem Changes:
-MAINTAINERS:
 -Add Alyssa & Steven as panfrost reviewers (Rob)
 -Add Jernej as DE2 reviewer (Maxime)
 -Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)

Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
 -Add lazy unmapping for gem bo's (Thomas)
 -Unify and rationalize vram mm and gem vram (Thomas)
 -Expose vmap and vunmap for gem vram objects (Thomas)
 -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)

Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
 -Add error event printing (behind CONFIG) and reg dump support (Lowry)
 -Add suspend/resume support (Lowry)
 -Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
 -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
 -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
 -Add module param to switch resource reuse workaround on/off (Gerd)
 -Avoid calling vmexit while holding spinlock (Gerd)
 -Use gem shmem helpers instead of ttm (Gerd)
 -Accommodate command buffer allocations too big for cma (David)

Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg:                using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found

# Conflicts:
#	drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
#	drivers/gpu/drm/i915/i915_drv.c
#	drivers/gpu/drm/i915/i915_gem.c
#	drivers/gpu/drm/i915/i915_gem_gtt.c
#	drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay

1 files changed, 59 insertions, 11 deletions

diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
index b12ae3a4c5f1..f4e293e7cf64 100644
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -5,6 +5,7 @@
  */
 
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_modeset_helper_vtables.h>
@@ -133,8 +134,6 @@ static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
  * just calls the appropriate functions from &drm_panel.
  *
  * @panel: The drm_panel being wrapped.  Must be non-NULL.
- * @connector_type: The DRM_MODE_CONNECTOR_* for the connector to be
- * created.
  *
  * For drivers converting from directly using drm_panel: The expected
  * usage pattern is that during either encoder module probe or DSI
@@ -148,11 +147,37 @@ static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
  * drm_mode_config_cleanup() if the bridge has already been attached), then
  * drm_panel_bridge_remove() to free it.
  *
+ * The connector type is set to @panel->connector_type, which must be set to a
+ * known type. Calling this function with a panel whose connector type is
+ * DRM_MODE_CONNECTOR_Unknown will return NULL.
+ *
  * See devm_drm_panel_bridge_add() for an automatically manged version of this
  * function.
  */
-struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
-					u32 connector_type)
+struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel)
+{
+	if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown))
+		return NULL;
+
+	return drm_panel_bridge_add_typed(panel, panel->connector_type);
+}
+EXPORT_SYMBOL(drm_panel_bridge_add);
+
+/**
+ * drm_panel_bridge_add_typed - Creates a &drm_bridge and &drm_connector with
+ * an explicit connector type.
+ * @panel: The drm_panel being wrapped.  Must be non-NULL.
+ * @connector_type: The connector type (DRM_MODE_CONNECTOR_*)
+ *
+ * This is just like drm_panel_bridge_add(), but forces the connector type to
+ * @connector_type instead of infering it from the panel.
+ *
+ * This function is deprecated and should not be used in new drivers. Use
+ * drm_panel_bridge_add() instead, and fix panel drivers as necessary if they
+ * don't report a connector type.
+ */
+struct drm_bridge *drm_panel_bridge_add_typed(struct drm_panel *panel,
+					      u32 connector_type)
 {
 	struct panel_bridge *panel_bridge;
 
@@ -176,7 +201,7 @@ struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
 
 	return &panel_bridge->bridge;
 }
-EXPORT_SYMBOL(drm_panel_bridge_add);
+EXPORT_SYMBOL(drm_panel_bridge_add_typed);
 
 /**
  * drm_panel_bridge_remove - Unregisters and frees a drm_bridge
@@ -213,15 +238,38 @@ static void devm_drm_panel_bridge_release(struct device *dev, void *res)
  * that just calls the appropriate functions from &drm_panel.
  * @dev: device to tie the bridge lifetime to
  * @panel: The drm_panel being wrapped.  Must be non-NULL.
- * @connector_type: The DRM_MODE_CONNECTOR_* for the connector to be
- * created.
  *
  * This is the managed version of drm_panel_bridge_add() which automatically
  * calls drm_panel_bridge_remove() when @dev is unbound.
  */
 struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
-					     struct drm_panel *panel,
-					     u32 connector_type)
+					     struct drm_panel *panel)
+{
+	if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown))
+		return NULL;
+
+	return devm_drm_panel_bridge_add_typed(dev, panel,
+					       panel->connector_type);
+}
+EXPORT_SYMBOL(devm_drm_panel_bridge_add);
+
+/**
+ * devm_drm_panel_bridge_add_typed - Creates a managed &drm_bridge and
+ * &drm_connector with an explicit connector type.
+ * @dev: device to tie the bridge lifetime to
+ * @panel: The drm_panel being wrapped.  Must be non-NULL.
+ * @connector_type: The connector type (DRM_MODE_CONNECTOR_*)
+ *
+ * This is just like devm_drm_panel_bridge_add(), but forces the connector type
+ * to @connector_type instead of infering it from the panel.
+ *
+ * This function is deprecated and should not be used in new drivers. Use
+ * devm_drm_panel_bridge_add() instead, and fix panel drivers as necessary if
+ * they don't report a connector type.
+ */
+struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev,
+						   struct drm_panel *panel,
+						   u32 connector_type)
 {
 	struct drm_bridge **ptr, *bridge;
 
@@ -230,7 +278,7 @@ struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
 	if (!ptr)
 		return ERR_PTR(-ENOMEM);
 
-	bridge = drm_panel_bridge_add(panel, connector_type);
+	bridge = drm_panel_bridge_add_typed(panel, connector_type);
 	if (!IS_ERR(bridge)) {
 		*ptr = bridge;
 		devres_add(dev, ptr);
@@ -240,4 +288,4 @@ struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
 
 	return bridge;
 }
-EXPORT_SYMBOL(devm_drm_panel_bridge_add);
+EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed);