diff options
| author | Evan Wang <xswang@marvell.com> | 2018-04-13 12:32:30 +0800 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2018-04-26 11:25:04 -0700 |
| commit | fa89f53bd7288d6aa7a982841119e7123faf5a53 (patch) | |
| tree | edcd32381580db6a29a58a681df8ee70dd7d8a68 /drivers/ata/ahci_qoriq.c | |
| parent | fd17ed684b6e33312cdcd9270b1fece9df266103 (diff) | |
| download | lwn-fa89f53bd7288d6aa7a982841119e7123faf5a53.tar.gz lwn-fa89f53bd7288d6aa7a982841119e7123faf5a53.zip | |
libahci: Allow drivers to override stop_engine
Marvell armada37xx, armada7k and armada8k share the same
AHCI sata controller IP, and currently there is an issue
(Errata Ref#226)that the SATA can not be detected via SATA
Port-MultiPlayer(PMP). After debugging, the reason is
found that the value of Port-x FIS-based Switching Control
(PxFBS@0x40) became wrong.
According to design, the bits[11:8, 0] of register PxFBS
are cleared when Port Command and Status (0x18) bit[0]
changes its value from 1 to 0, i.e. falling edge of Port
Command and Status bit[0] sends PULSE that resets PxFBS
bits[11:8; 0].
So it needs save the port PxFBS register before PxCMD
ST write and restore the port PxFBS register afterwards
in ahci_stop_engine().
This commit allows drivers to override ahci_stop_engine
behavior for use by the Marvell AHCI driver(and potentially
other drivers in the future).
Signed-off-by: Evan Wang <xswang@marvell.com>
Cc: Ofer Heifetz <oferh@marvell.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/ahci_qoriq.c')
| -rw-r--r-- | drivers/ata/ahci_qoriq.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index 2685f28160f7..cfdef4d44ae9 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: |