From fa89f53bd7288d6aa7a982841119e7123faf5a53 Mon Sep 17 00:00:00 2001 From: Evan Wang Date: Fri, 13 Apr 2018 12:32:30 +0800 Subject: libahci: Allow drivers to override stop_engine Marvell armada37xx, armada7k and armada8k share the same AHCI sata controller IP, and currently there is an issue (Errata Ref#226)that the SATA can not be detected via SATA Port-MultiPlayer(PMP). After debugging, the reason is found that the value of Port-x FIS-based Switching Control (PxFBS@0x40) became wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs save the port PxFBS register before PxCMD ST write and restore the port PxFBS register afterwards in ahci_stop_engine(). This commit allows drivers to override ahci_stop_engine behavior for use by the Marvell AHCI driver(and potentially other drivers in the future). Signed-off-by: Evan Wang Cc: Ofer Heifetz Cc: Tejun Heo Cc: Thomas Petazzoni Signed-off-by: Tejun Heo --- drivers/ata/ahci_qoriq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata/ahci_qoriq.c') diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index 2685f28160f7..cfdef4d44ae9 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, DPRINTK("ENTER\n"); - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: -- cgit v1.2.3