Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

1 files changed, 6 insertions, 5 deletions

diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
index 2fd2b77e12ce..ab9e791070b4 100644
--- a/arch/sh/drivers/pci/common.c
+++ b/arch/sh/drivers/pci/common.c
@@ -50,20 +50,21 @@ int __init pci_is_66mhz_capable(struct pci_channel *hose,
 				int top_bus, int current_bus)
 {
 	u32 pci_devfn;
-	unsigned short vid;
+	u16 vid;
 	int cap66 = -1;
 	u16 stat;
+	int ret;
 
 	pr_info("PCI: Checking 66MHz capabilities...\n");
 
 	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
 		if (PCI_FUNC(pci_devfn))
 			continue;
-		if (early_read_config_word(hose, top_bus, current_bus,
-					   pci_devfn, PCI_VENDOR_ID, &vid) !=
-		    PCIBIOS_SUCCESSFUL)
+		ret = early_read_config_word(hose, top_bus, current_bus,
+					     pci_devfn, PCI_VENDOR_ID, &vid);
+		if (ret != PCIBIOS_SUCCESSFUL)
 			continue;
-		if (vid == 0xffff)
+		if (PCI_POSSIBLE_ERROR(vid))
 			continue;
 
 		/* check 66MHz capability */