Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

231 files changed, 18837 insertions, 3627 deletions

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f19b762c008d..6f3e1556ce42 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += actions
-subdir-y += al
 subdir-y += allwinner
 subdir-y += altera
+subdir-y += amazon
 subdir-y += amd
 subdir-y += amlogic
 subdir-y += apm
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4d3cd0ac5bb..916d10d5b87c 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index 06a775c41664..3e99a87e9ce5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -9,3 +9,22 @@
 	model = "Pine64 PinePhone Braveheart (1.1)";
 	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
 };
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 000000000000..a9f5b670c9b8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone (1.2)";
+	compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since 1.0,
+	 * and the lowest PWM duty cycle that doesn't lead to backlight being off
+	 * is around 10%. Duty cycle for the lowest brightness level also varries
+	 * quite a bit between individual boards, so the lowest value here was
+	 * chosen as a safe default.
+	 */
+	brightness-levels = <
+		5000 5248 5506 5858 6345
+		6987 7805 8823 10062 11543
+		13287 15317 17654 20319 23336
+		26724 30505 34702 39335 44427
+		50000
+	>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <500>;
+};
+
+&lis3mdl {
+	/*
+	 * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
+	 * enable interrupts.
+	 */
+	interrupt-parent = <&pio>;
+	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index cefda145c3c9..25150aba749d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -16,6 +16,13 @@
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -84,6 +91,28 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -92,11 +121,28 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
 	/* Magnetometer */
-	lis3mdl@1e {
+	lis3mdl: lis3mdl@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
@@ -188,6 +234,10 @@
 	 */
 };
 
+&r_pwm {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -279,7 +329,7 @@
 
 &reg_dldo4 {
 	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vcc-wifi-io";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
index 2e2b14c0ae75..8857a3791593 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 #include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
 
 / {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
new file mode 100644
index 000000000000..b2657201957e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1000000 1000000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1080000 1080000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000 1120000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000 1160000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000 1240000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000 1260000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000 1300000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index 64d35daf2023..d811df332824 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -4,6 +4,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 #include <arm/sunxi-libretech-all-h3-cc.dtsi>
 
 / {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index c95a68541309..de19e68eb84e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -30,6 +30,21 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -48,6 +63,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -92,6 +111,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
@@ -103,3 +126,18 @@
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 4462a68c0681..6735e316a39c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -3,6 +3,8 @@
 
 #include <arm/sunxi-h3-h5.dtsi>
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -13,6 +15,9 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -20,6 +25,9 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -27,6 +35,9 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -34,6 +45,9 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -165,6 +179,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 9498d1de730c..a6fb01c7ab34 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -380,6 +380,7 @@
 			reg = <0xffda4000 0x1000>;
 			interrupts = <0 99 4>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
@@ -393,6 +394,7 @@
 			reg = <0xffda5000 0x1000>;
 			interrupts = <0 100 4>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/amazon/Makefile
index d79822dc30cd..ba9e11544905 100644
--- a/arch/arm64/boot/dts/al/Makefile
+++ b/arch/arm64/boot/dts/amazon/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v3-evp.dtb
diff --git a/arch/arm64/boot/dts/al/alpine-v2-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
index a079d7b3063e..a079d7b3063e 100644
--- a/arch/arm64/boot/dts/al/alpine-v2-evp.dts
+++ b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index d5e7e2bb4e6c..d5e7e2bb4e6c 100644
--- a/arch/arm64/boot/dts/al/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
new file mode 100644
index 000000000000..48078f5ea545
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include "alpine-v3.dtsi"
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)";
+	compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
new file mode 100644
index 000000000000..73a352ea8fd5
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3";
+	compatible = "amazon,al-alpine-v3";
+
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: cache@0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster1_l2: cache@100 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster2_l2: cache@200 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster3_l2: cache@300 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@0 {
+			reg = <0x0 0x0 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f0000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
+			      <0x0 0xf0a00000 0 0x200000>,	/* GICR */
+			      <0x0 0xf0000000 0 0x2000>,	/* GICC */
+			      <0x0 0xf0010000 0 0x1000>,	/* GICH */
+			      <0x0 0xf0020000 0 0x2000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@fbd00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbd00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* 8 x legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <336>;
+			al,msi-num-spis = <959>;
+			interrupt-parent = <&gic>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5cac4d1d487d..4e2239ffcaa5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 8e6281c685fa..b9efc8469265 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -181,8 +181,10 @@
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 593a006f4b7b..1e83ec5b8c91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -52,6 +52,39 @@
 		secure-monitor = <&sm>;
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -185,8 +218,10 @@
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
@@ -2360,21 +2395,7 @@
 			interrupt-names = "job", "mmu", "gpu";
 			clocks = <&clkc CLKID_MALI>;
 			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-
-			/*
-			 * Mali clocking is provided by two identical clock paths
-			 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-			 * free mux to safely change frequency while running.
-			 */
-			assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-					  <&clkc CLKID_MALI_0>,
-					  <&clkc CLKID_MALI>; /* Glitch free mux */
-			assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
-						 <0>, /* Do Nothing */
-						 <&clkc CLKID_MALI_0>;
-			assigned-clock-rates = <0>, /* Do Nothing */
-					       <800000000>,
-					       <0>; /* Do Nothing */
+			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..34fffa6d859d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -9,6 +9,7 @@
 #include "meson-g12b-s922x.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
@@ -20,6 +21,14 @@
 		ethernet0 = &ethmac;
 	};
 
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -209,11 +218,42 @@
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12B-ODROID-N2";
-		audio-aux-devs = <&tdmout_b>;
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dioo2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-				"TDM_B Playback", "TDMOUT_B OUT";
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -236,8 +276,20 @@
 			sound-dai = <&frddr_c>;
 		};
 
-		/* 8ch hdmi interface */
 		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
 			sound-dai = <&tdmif_b>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -246,22 +298,56 @@
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec {
+			codec-0 {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
 		};
 
 		/* hdmi glue */
-		dai-link-4 {
+		dai-link-8 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
 
 			codec {
 				sound-dai = <&hdmi_tx>;
 			};
 		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
 	};
 };
 
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
 &arb {
 	status = "okay";
 };
@@ -476,14 +562,54 @@
 	status = "okay";
 };
 
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
 &tdmout_b {
 	status = "okay";
 };
 
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
 &tohdmitx {
 	status = "okay";
 };
 
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 98b70d216a6f..2802ddbb83ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -336,9 +336,11 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
 	non-removable;
 	disable-wp;
 
@@ -398,7 +400,7 @@
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-	clock-names = "lpo";
+		clock-names = "lpo";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 000000000000..f9771b51c852
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index ba63c36b22e0..0edd137151f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -60,7 +61,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 
@@ -68,7 +69,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 	};
@@ -438,12 +439,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 				reg =  <0x0 0x0 0x0 0x100>;
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-gx-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&sysctrl>;
-				};
-
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-gx-aoclkc";
 					#clock-cells = <1>;
@@ -552,6 +547,12 @@
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
 			};
 
 			mailbox: mailbox@404 {
@@ -574,6 +575,7 @@
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 234490d3ee68..7c029f552a23 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/clock/gxbb-clkc.h>
@@ -264,46 +265,6 @@
 	};
 };
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -333,8 +294,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 };
 
 &gpio_intc {
@@ -385,6 +347,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -747,7 +719,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -760,6 +732,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -866,7 +841,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
index 6aaafff674f9..478e755cc87c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -4,42 +4,14 @@
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
+#include "meson-gx-mali450.dtsi"
 
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
index f9d705648426..29975849822c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
@@ -11,14 +11,13 @@
 };
 
 /* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
 &mali {
-	assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-			  <&clkc CLKID_MALI_0>,
-			  <&clkc CLKID_MALI>; /* Glitch free mux */
-	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-				 <0>, /* Do Nothing */
-				 <&clkc CLKID_MALI_0>;
-	assigned-clock-rates = <0>, /* Do Nothing */
-			       <666666666>,
-			       <0>; /* Do Nothing */
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 6c8b189884ca..c3ac531c4f84 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -131,8 +131,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 
 	mdio0: mdio {
 		#address-cells = <1>;
@@ -787,7 +788,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -800,6 +801,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -906,7 +910,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
new file mode 100644
index 000000000000..ec794c134c15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 40e3e123e05b..fe4145112295 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -82,6 +82,35 @@
 			#cooling-cells = <2>;
 		};
 	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
 };
 
 &apb {
@@ -106,21 +135,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&clkc CLKID_MALI>;
 		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
+		operating-points-v2 = <&gpu_opp_table>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 1ef1e3672b96..94f75b446504 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -183,6 +183,23 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
@@ -222,6 +239,12 @@
 	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
 	pinctrl-names = "default";
 
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
 	gpio_expander: gpio-controller@20 {
 		compatible = "ti,tca6408";
 		reg = <0x20>;
@@ -270,7 +293,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
 	non-removable;
@@ -337,7 +359,7 @@
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";
 
-	w25q32: spi-flash@0 {
+	w25q128: spi-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "winbond,w25q128fw", "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..0da56c051a0e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -8,6 +8,7 @@
 
 #include "meson-sm1.dtsi"
 #include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "khadas,vim3l", "amlogic,sm1";
@@ -31,6 +32,69 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-KHADAS-VIM3L";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -61,6 +125,18 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
@@ -88,8 +164,24 @@
 	status = "okay";
 };
 
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
+
 &usb {
 	phys = <&usb2_phy0>, <&usb2_phy1>;
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
 #include "meson-sm1.dtsi"
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-ODROID-C4";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -237,6 +301,18 @@
 	amlogic,tx-delay-ns = <2>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
@@ -381,6 +457,18 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 6721966140f4..74ac4ac75865 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -24,7 +24,7 @@
 	interrupt-parent = <&gic>;
 
 	arm_a53_pmu {
-		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -33,7 +33,7 @@
 	};
 
 	arm_a57_pmu {
-		compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -256,7 +256,7 @@
 		cpu_on = <0xC4000003>;
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1756,33 +1756,26 @@
 			status = "disabled";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@15610000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15610000 0x1000>;
-				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@15600000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15600000 0x1000>;
-				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@15610000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15610000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@15600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15600000 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		audio-subsystem@11400000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 7af288fa9475..92fecc539c6c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -157,6 +157,7 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
@@ -193,6 +194,7 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo13_reg: LDO13 {
@@ -406,6 +408,10 @@
 	};
 };
 
+&ufs {
+	status = "okay";
+};
+
 &usbdrd_phy {
 	vbus-supply = <&usb30_vbus_reg>;
 	vbus-boost-supply = <&usb3drd_boost_5v>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 5558045637ac..b9ed6a33e290 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -29,7 +29,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,7 +83,7 @@
 		method = "smc";
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -105,33 +105,26 @@
 				<0x11006000 0x2000>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@10e10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10E10000 0x1000>;
-				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@10e10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10E10000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: pdma@10eb0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10EB0000 0x1000>;
-				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: pdma@10eb0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10EB0000 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		clock_topc: clock-controller@10570000 {
@@ -220,9 +213,14 @@
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
 				 <&clock_top1 DOUT_SCLK_MMC0>,
-				 <&clock_top1 DOUT_SCLK_MMC1>;
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
 			clock-names = "fin_pll", "dout_aclk_fsys1_200",
-				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
 		};
 
 		serial_0: serial@13630000 {
@@ -576,6 +574,11 @@
 		pwm: pwm@136c0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
 			clocks = <&clock_peric0 PCLK_PWM>;
@@ -592,13 +595,38 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		thermal-zones {
-			atlas_thermal: cluster0-thermal {
-				polling-delay-passive = <0>; /* milliseconds */
-				polling-delay = <0>; /* milliseconds */
-				thermal-sensors = <&tmuctrl_0>;
-				#include "exynos7-trip-points.dtsi"
-			};
+		ufs: ufs@15570000 {
+			compatible = "samsung,exynos7-ufs";
+			reg = <0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+			clock-names = "ref_clk", "rx1_symbol_clk",
+				      "rx0_symbol_clk",
+				      "tx0_symbol_clk";
 		};
 
 		usbdrd_phy: phy@15500000 {
@@ -636,6 +664,15 @@
 		};
 	};
 
+	thermal-zones {
+		atlas_thermal: cluster0-thermal {
+			polling-delay-passive = <0>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos7-trip-points.dtsi"
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 006e544d1fdb..ff19ec415b60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -17,6 +17,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		rtic-a = &rtic_a;
 		rtic-b = &rtic_b;
 		rtic-c = &rtic_c;
@@ -512,6 +513,20 @@
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index dd69c5b821e9..e4f00c2b6608 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -107,6 +107,91 @@
 	};
 };
 
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 055f114cf848..0efeb8fa773e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -17,6 +17,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,12 +133,32 @@
 	};
 
 	thermal-zones {
-		core-cluster {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
 			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
 				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
@@ -983,6 +1007,19 @@
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	malidp0: display@f080000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 1aac81da7e37..fea167d222cf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -148,4 +148,8 @@
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
 #include "fsl-ls1043-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index bfa9d957e536..3516af4726a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -209,3 +209,11 @@
 		fsl,tdm-interface;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3b641bd43229..5c2e370f6316 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -27,6 +27,7 @@
 		ethernet4 = &enet4;
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -149,19 +150,79 @@
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
 
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_crit: cpu-crit {
+
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -170,7 +231,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -179,6 +240,26 @@
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -677,6 +758,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb1: usb3@3000000 {
@@ -687,6 +769,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb2: usb3@3100000 {
@@ -697,6 +780,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		sata: sata@3200000 {
@@ -829,6 +913,19 @@
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index d4c1da3d4bde..0246d975a206 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -28,6 +28,7 @@
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
 		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -117,19 +118,79 @@
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu-crit {
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -138,7 +199,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -147,6 +208,26 @@
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -765,6 +846,20 @@
 			queue-sizes = <64 64>;
 			big-endian;
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	reserved-memory {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 36a799554620..169f4742ae3b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -18,6 +18,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -781,6 +782,19 @@
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 3944ef16ec60..41102dacc2e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -20,6 +20,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
@@ -763,6 +764,19 @@
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	ddr1: memory-controller@1080000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 3b88e1efe4db..2d1fe6c3797f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -35,6 +35,42 @@
 	status = "okay";
 };
 
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &esdhc0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 22d0308eb13b..54fe8cd3a711 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -121,7 +121,7 @@
 			power-monitor@40 {
 				compatible = "ti,ina220";
 				reg = <0x40>;
-				shunt-resistor = <1000>;
+				shunt-resistor = <500>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index abaeb587de48..d247e4228d60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -2,7 +2,7 @@
 //
 // Device Tree Include file for Layerscape-LX2160A family SoC.
 //
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -16,6 +16,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -777,6 +781,45 @@
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
 		esdhc0: esdhc@2140000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -888,6 +931,20 @@
 			timeout-sec = <30>;
 		};
 
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,lx2160a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
@@ -957,7 +1014,7 @@
 		pcie@3400000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -985,7 +1042,7 @@
 		pcie@3500000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1013,7 +1070,7 @@
 		pcie@3600000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1041,7 +1098,7 @@
 		pcie@3700000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1069,7 +1126,7 @@
 		pcie@3800000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1097,7 +1154,7 @@
 		pcie@3900000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index aaf6e71101a1..76f040e4be5e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -18,10 +18,18 @@
 
 	aliases {
 		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -29,14 +37,6 @@
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
 	};
 
 	cpus {
@@ -467,7 +467,7 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
@@ -775,6 +775,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 61f351958618..b846526a8d8b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -13,6 +13,102 @@
 	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
 };
 
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1{
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &A53_0 {
 	/delete-property/operating-points-v2;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 85fc0aa38c4f..98f5324b1dbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -223,6 +223,12 @@
 		>;
 	};
 
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9a4b65a267d4..9385dd7d1a2f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -374,7 +374,7 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
@@ -675,6 +675,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 45e2c0a4e889..9de2aa1c573c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -23,6 +23,12 @@
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -307,8 +313,8 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx8mp-ocotp", "syscon";
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
 				/* For nvmem subnodes */
@@ -621,6 +627,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -730,5 +744,11 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 6a55165bd76a..0d1088dcaa02 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -131,6 +131,8 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch: switch@0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 978f8122c0d2..f70435cf9ad5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -20,6 +20,7 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -29,6 +30,8 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -539,7 +542,7 @@
 				};
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mq-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
@@ -675,6 +678,7 @@
 					pgc_vpu: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
 					};
 
 					pgc_disp: power-domain@7 {
@@ -959,6 +963,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mq-usdhc",
 				             "fsl,imx7d-usdhc";
@@ -1142,6 +1154,32 @@
 			status = "disabled";
 		};
 
+		vpu: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu";
+			reg = <0x38300000 0x10000>,
+			      <0x38310000 0x10000>,
+			      <0x38320000 0x10000>;
+			reg-names = "g1", "g2", "ctrl";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+			clock-names = "g1", "g2", "bus";
+			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+					  <&clk IMX8MQ_CLK_VPU_G2>,
+					  <&clk IMX8MQ_CLK_VPU_BUS>,
+					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_SYS1_PLL_800M>,
+						 <&clk IMX8MQ_VPU_PLL>;
+			assigned-clock-rates = <600000000>, <600000000>,
+					       <800000000>, <0>;
+			power-domains = <&pgc_vpu>;
+		};
+
 		pcie0: pcie@33800000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33800000 0x400000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index d1c3c98e4b39..e46faac1fe71 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -19,6 +19,8 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		gpio0 = &lsio_gpio0;
 		gpio1 = &lsio_gpio1;
 		gpio2 = &lsio_gpio2;
@@ -27,10 +29,18 @@
 		gpio5 = &lsio_gpio5;
 		gpio6 = &lsio_gpio6;
 		gpio7 = &lsio_gpio7;
+		i2c0 = &adma_i2c0;
+		i2c1 = &adma_i2c1;
+		i2c2 = &adma_i2c2;
+		i2c3 = &adma_i2c3;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
+		mu0 = &lsio_mu0;
 		mu1 = &lsio_mu1;
+		mu2 = &lsio_mu2;
+		mu3 = &lsio_mu3;
+		mu4 = &lsio_mu4;
 		serial0 = &adma_lpuart0;
 		serial1 = &adma_lpuart1;
 		serial2 = &adma_lpuart2;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..c1b614dabb8e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -526,10 +527,63 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
@@ -612,3 +666,32 @@
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 	};
 };
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,lfps_filter_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis_enblslpm_quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rt1711h_ep>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index c39b78989ff9..d25aac5e0bf8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1152,6 +1152,40 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		dwc3: dwc3@ff100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff100000 0x0 0x100000>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "ref", "bus_early";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			interrupts = <0 159 4>, <0 161 4>;
+			phys = <&usb_phy>;
+			phy-names = "usb3-phy";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index c14205cd6bf5..533ed523888d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -122,222 +122,6 @@
 		power-off-delay-us = <10>;
 	};
 
-	soc {
-		spi0: spi@f7106000 {
-			status = "ok";
-		};
-
-		i2c0: i2c@f7100000 {
-			status = "ok";
-		};
-
-		i2c1: i2c@f7101000 {
-			status = "ok";
-		};
-
-		uart1: uart@f7111000 {
-			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
-			assigned-clock-rates = <150000000>;
-			status = "ok";
-
-			bluetooth {
-				compatible = "ti,wl1835-st";
-				enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-				clocks = <&pmic>;
-				clock-names = "ext_clock";
-			};
-		};
-
-		uart2: uart@f7112000 {
-			status = "ok";
-		};
-
-		uart3: uart@f7113000 {
-			status = "ok";
-		};
-
-		/*
-		 * Legend: proper name = the GPIO line is used as GPIO
-		 *         NC = not connected (not routed from the SoC)
-		 *         "[PER]" = pin is muxed for peripheral (not GPIO)
-		 *         "" = no idea, schematic doesn't say, could be
-		 *              unrouted (not connected to any external pin)
-		 *         LSEC = Low Speed External Connector
-		 *         HSEC = High Speed External Connector
-		 *
-		 * Pin assignments taken from LeMaker and CircuitCo Schematics
-		 * Rev A1.
-		 *
-		 * For the lines routed to the external connectors the
-		 * lines are named after the 96Boards CE Specification 1.0,
-		 * Appendix "Expansion Connector Signal Description".
-		 *
-		 * When the 96Board naming of a line and the schematic name of
-		 * the same line are in conflict, the 96Board specification
-		 * takes precedence, which means that the external UART on the
-		 * LSEC is named UART0 while the schematic and SoC names this
-		 * UART2. This is only for the informational lines i.e. "[FOO]",
-		 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
-		 * ones actually used for GPIO.
-		 */
-		gpio0: gpio@f8011000 {
-			gpio-line-names = "PWR_HOLD", "DSI_SEL",
-			"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
-			"PWRON_DET", "5V_HUB_EN";
-		};
-
-		gpio1: gpio@f8012000 {
-			gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
-			"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
-		};
-
-		gpio2: gpio@f8013000 {
-			gpio-line-names =
-				"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
-				"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
-				"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
-				"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
-				"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
-				"USB_ID_DET", "USB_VBUS_DET",
-				"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
-		};
-
-		gpio3: gpio@f8014000 {
-			gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
-			"WLAN_ACTIVE", "NC", "NC";
-		};
-
-		gpio4: gpio@f7020000 {
-			gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
-			"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
-		};
-
-		gpio5: gpio@f7021000 {
-			gpio-line-names = "NC", "NC",
-			"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
-			"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
-			"[AUX_SSI1]", "NC",
-			"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
-			"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
-		};
-
-		gpio6: gpio@f7022000 {
-			gpio-line-names =
-			"[SPI0_DIN]", /* Pin 10: SPI0_DI */
-			"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
-			"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
-			"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
-			"NC", "NC", "NC",
-			"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
-		};
-
-		gpio7: gpio@f7023000 {
-			gpio-line-names = "NC", "NC", "NC", "NC",
-			"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
-			"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
-			"NC", "NC";
-		};
-
-		gpio8: gpio@f7024000 {
-			gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
-			"", "", "", "", "", "";
-		};
-
-		gpio9: gpio@f7025000 {
-			gpio-line-names = "",
-			"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
-			"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
-			"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
-		};
-
-		gpio10: gpio@f7026000 {
-			gpio-line-names = "BOOT_SEL",
-			"[ISP_CCLK1]",
-			"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
-			"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
-			"NC", "NC",
-			"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
-			"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
-		};
-
-		gpio11: gpio@f7027000 {
-			gpio-line-names =
-			"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
-			"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
-			"", "NC", "NC", "NC", "", "";
-		};
-
-		gpio12: gpio@f7028000 {
-			gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
-			"[BT_PCM_DO]",
-			"NC", "NC", "NC", "NC",
-			"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
-		};
-
-		gpio13: gpio@f7029000 {
-			gpio-line-names = "[UART0_RX]", "[UART0_TX]",
-			"[BT_UART1_CTS]", "[BT_UART1_RTS]",
-			"[BT_UART1_RX]", "[BT_UART1_TX]",
-			"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
-			"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
-		};
-
-		gpio14: gpio@f702a000 {
-			gpio-line-names =
-			"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
-			"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
-			"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
-			"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
-			"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
-			"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
-			"[I2C2_SCL]", "[I2C2_SDA]";
-		};
-
-		gpio15: gpio@f702b000 {
-			gpio-line-names = "", "", "", "", "", "", "NC", "";
-		};
-
-		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
-
-		dwmmc_0: dwmmc0@f723d000 {
-			cap-mmc-highspeed;
-			non-removable;
-			bus-width = <0x8>;
-			vmmc-supply = <&ldo19>;
-		};
-
-		dwmmc_1: dwmmc1@f723e000 {
-			card-detect-delay = <200>;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			vqmmc-supply = <&ldo7>;
-			vmmc-supply = <&ldo10>;
-			bus-width = <0x4>;
-			disable-wp;
-			cd-gpios = <&gpio1 0 1>;
-		};
-
-		dwmmc_2: dwmmc2@f723f000 {
-			bus-width = <0x4>;
-			non-removable;
-			cap-power-off-card;
-			vmmc-supply = <&reg_vdd_3v3>;
-			mmc-pwrseq = <&wl1835_pwrseq>;
-
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-			wlcore: wlcore@2 {
-				compatible = "ti,wl1835";
-				reg = <2>;	/* sdio func num */
-				/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
-				interrupt-parent = <&gpio1>;
-				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -480,10 +264,26 @@
 	};
 };
 
+&uart1 {
+	assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+	assigned-clock-rates = <150000000>;
+	status = "ok";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+	};
+};
+
 &uart2 {
+	status = "ok";
 	label = "LS-UART0";
 };
+
 &uart3 {
+	status = "ok";
 	label = "LS-UART1";
 };
 
@@ -506,6 +306,196 @@
 	};
 };
 
+&dwmmc_0 {
+	cap-mmc-highspeed;
+	non-removable;
+	bus-width = <0x8>;
+	vmmc-supply = <&ldo19>;
+};
+
+&dwmmc_1 {
+	card-detect-delay = <200>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vqmmc-supply = <&ldo7>;
+	vmmc-supply = <&ldo10>;
+	bus-width = <0x4>;
+	disable-wp;
+	cd-gpios = <&gpio1 0 1>;
+};
+
+&dwmmc_2 {
+	bus-width = <0x4>;
+	non-removable;
+	cap-power-off-card;
+	vmmc-supply = <&reg_vdd_3v3>;
+	mmc-pwrseq = <&wl1835_pwrseq>;
+
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;	/* sdio func num */
+		/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (not routed from the SoC)
+ *         "[PER]" = pin is muxed for peripheral (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Pin assignments taken from LeMaker and CircuitCo Schematics
+ * Rev A1.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	gpio-line-names = "PWR_HOLD", "DSI_SEL",
+	"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+	"PWRON_DET", "5V_HUB_EN";
+};
+
+&gpio1 {
+	gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+	"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+		"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+		"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+		"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+		"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+		"USB_ID_DET", "USB_VBUS_DET",
+		"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+};
+
+&gpio3 {
+	gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+	"WLAN_ACTIVE", "NC", "NC";
+};
+
+&gpio4 {
+	gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+	"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+};
+
+&gpio5 {
+	gpio-line-names = "NC", "NC",
+	"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+	"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+	"[AUX_SSI1]", "NC",
+	"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+	"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+};
+
+&gpio6 {
+	gpio-line-names =
+	"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+	"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+	"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+	"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+	"NC", "NC", "NC",
+	"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+};
+
+&gpio7 {
+	gpio-line-names = "NC", "NC", "NC", "NC",
+	"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+	"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+	"NC", "NC";
+};
+
+&gpio8 {
+	gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+	"", "", "", "", "", "";
+};
+
+&gpio9 {
+	gpio-line-names = "",
+	"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+	"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+	"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+};
+
+&gpio10 {
+	gpio-line-names = "BOOT_SEL",
+	"[ISP_CCLK1]",
+	"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+	"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+	"NC", "NC",
+	"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+	"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+};
+
+&gpio11 {
+	gpio-line-names =
+	"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+	"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+	"", "NC", "NC", "NC", "", "";
+};
+
+&gpio12 {
+	gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+	"[BT_PCM_DO]",
+	"NC", "NC", "NC", "NC",
+	"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+};
+
+&gpio13 {
+	gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+	"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+	"[BT_UART1_RX]", "[BT_UART1_TX]",
+	"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+	"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+};
+
+&gpio14 {
+	gpio-line-names =
+	"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+	"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+	"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+	"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+	"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+	"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+	"[I2C2_SCL]", "[I2C2_SDA]";
+};
+
+&gpio15 {
+	gpio-line-names = "", "", "", "", "", "", "NC", "";
+};
+
+/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -516,7 +506,7 @@
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
@@ -549,3 +539,7 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 2072b637b5af..3d189d9f0d24 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -302,7 +302,7 @@
 			mboxes = <&mailbox 1 0 11>;
 		};
 
-		uart0: uart@f8015000 {	/* console */
+		uart0: serial@f8015000 {	/* console */
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf8015000 0x0 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,7 +311,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@f7111000 {
+		uart1: serial@f7111000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7111000 0x0 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +325,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart@f7112000 {
+		uart2: serial@f7112000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7112000 0x0 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -337,7 +337,7 @@
 			status = "disabled";
 		};
 
-		uart3: uart@f7113000 {
+		uart3: serial@f7113000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7113000 0x0 0x1000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
 			status = "disabled";
 		};
 
-		uart4: uart@f7114000 {
+		uart4: serial@f7114000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7114000 0x0 0x1000>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index f52de8f7806a..9d7f19e97df7 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include <dt-bindings/reset/altr,rst-mgr-s10.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/agilex-clock.h>
 
 / {
 	compatible = "intel,socfpga-agilex";
@@ -101,6 +102,40 @@
 			fpga-mgr = <&fpga_mgr>;
 		};
 
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,agilex-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clocks {
+			cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			cb_intosc_ls_clk: cb-intosc-ls-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			f2s_free_clk: f2s-free-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			osc1: osc1 {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			qspi_clk: qspi-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <200000000>;
+			};
+		};
+
 		gmac0: ethernet@ff800000 {
 			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
 			reg = <0xff800000 0x2000>;
@@ -114,6 +149,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 1>;
 			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			clocks = <&clkmgr AGILEX_EMAC0_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -130,6 +167,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 2>;
 			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+			clocks = <&clkmgr AGILEX_EMAC1_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -146,6 +185,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 3>;
 			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
+			clocks = <&clkmgr AGILEX_EMAC2_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -196,6 +237,7 @@
 			reg = <0xffc02800 0x100>;
 			interrupts = <0 103 4>;
 			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -206,6 +248,7 @@
 			reg = <0xffc02900 0x100>;
 			interrupts = <0 104 4>;
 			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -216,6 +259,7 @@
 			reg = <0xffc02a00 0x100>;
 			interrupts = <0 105 4>;
 			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -226,6 +270,7 @@
 			reg = <0xffc02b00 0x100>;
 			interrupts = <0 106 4>;
 			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -236,6 +281,7 @@
 			reg = <0xffc02c00 0x100>;
 			interrupts = <0 107 4>;
 			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -248,6 +294,9 @@
 			fifo-depth = <0x400>;
 			resets = <&rst SDMMC_RESET>;
 			reset-names = "reset";
+			clocks = <&clkmgr AGILEX_L4_MP_CLK>,
+				 <&clkmgr AGILEX_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
 			status = "disabled";
 		};
@@ -260,6 +309,10 @@
 			      <0xffb80000 0x1000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0 97 4>;
+			clocks = <&clkmgr AGILEX_NAND_CLK>,
+				 <&clkmgr AGILEX_NAND_X_CLK>,
+				 <&clkmgr AGILEX_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
 			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
 			status = "disabled";
 		};
@@ -286,6 +339,8 @@
 			#dma-requests = <32>;
 			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
 			reset-names = "dma", "dma-ocp";
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
 		};
 
 		rst: rstmgr@ffd11000 {
@@ -312,6 +367,9 @@
 				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
 				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
 			stream-match-mask = <0x7ff0>;
+			clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
+				 <&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
+				 <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -322,8 +380,10 @@
 			reg = <0xffda4000 0x1000>;
 			interrupts = <0 99 4>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -334,8 +394,10 @@
 			reg = <0xffda5000 0x1000>;
 			interrupts = <0 100 4>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -357,24 +419,32 @@
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 113 4>;
 			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc03100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 114 4>;
 			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 115 4>;
 			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 116 4>;
 			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -385,6 +455,7 @@
 			reg-io-width = <4>;
 			resets = <&rst UART0_RESET>;
 			status = "disabled";
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 		};
 
 		uart1: serial1@ffc02100 {
@@ -394,6 +465,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -411,6 +483,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX_USB_CLK>;
 			iommus = <&smmu 6>;
 			status = "disabled";
 		};
@@ -424,6 +497,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			iommus = <&smmu 7>;
+			clocks = <&clkmgr AGILEX_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -432,6 +506,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 117 4>;
 			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -440,6 +515,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 118 4>;
 			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -448,6 +524,7 @@
 			reg = <0xffd00400 0x100>;
 			interrupts = <0 125 4>;
 			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -456,6 +533,7 @@
 			reg = <0xffd00500 0x100>;
 			interrupts = <0 126 4>;
 			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -533,6 +611,7 @@
 			cdns,fifo-depth = <128>;
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 92f478def723..96c50d48289d 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -41,6 +41,14 @@
 		/* We expect the bootloader to fill in the reg */
 		reg = <0 0 0 0>;
 	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+	};
 };
 
 &gpio1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 47247215770d..7a3198cd7a07 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -14,3 +14,31 @@
 	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
 		     "marvell,armada-ap806";
 };
+
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 7699b19224c2..79e8ce59baa8 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -15,6 +15,18 @@
 		     "marvell,armada-ap806";
 };
 
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
@@ -23,3 +35,31 @@
 &cp0_rtc {
 	status = "disabled";
 };
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 7f9b9a647717..12e477f1aeb9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -56,6 +56,24 @@
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
+			smmu: iommu@5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gic: interrupt-controller@210000 {
 				compatible = "arm,gic-400";
 				#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a57af9da9f5c..3ee682c266cc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -11,4 +11,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 9361ada0c497..fa159b20379e 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -16,6 +16,8 @@
 		};
 
 		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
 			mt6358_vdram1_reg: buck_vdram1 {
 				regulator-name = "vdram1";
 				regulator-min-microvolt = <500000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 70b1ffcab7f0..5e046f9d48ce 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -167,7 +167,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu1: cpu@1 {
@@ -182,7 +182,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu2: cpu@100 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index afd6ddbcbdf2..ae405bd8f06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -205,7 +205,7 @@
 		};
 	};
 
-	mmc0_pins_uhs: mmc0@0{
+	mmc0_pins_uhs: mmc0 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -264,7 +264,7 @@
 		};
 	};
 
-	mmc1_pins_uhs: mmc1@0{
+	mmc1_pins_uhs: mmc1 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
new file mode 100644
index 000000000000..47113e275cb5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku176.
+ *
+ * SKU is a 8-bit value (0xb0 == 176):
+ *  - Bits 7..4: Panel ID: 0xb (BOE)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku176 board";
+	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
new file mode 100644
index 000000000000..fbc471ccf805
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen4: touchscreen@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "LE_Krane";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
new file mode 100644
index 000000000000..f0a070535b34
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	it6505_pp18_reg: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "it6505_pp18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 178 0>;
+		enable-active-high;
+	};
+
+	lcd_pp3300: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_pp3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bl_pp5000: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_pp5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mmc1_fixed_power: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc1_fixed_io: regulator4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp1800_alw: regulator5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp3300_alw: regulator6 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	max98357a: codec0 {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&pio 175 0>;
+	};
+
+	btsco: codec1 {
+		compatible = "linux,bt-sco";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_pwrseq>;
+
+		/* Toggle WIFI_ENABLE to reset the chip. */
+		reset-gpios = <&pio 119 1>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_wakeup>;
+
+		wowlan {
+			label = "Wake on WiFi";
+			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 4241
+						0 4063
+						5000 3856
+						10000 3621
+						15000 3364
+						20000 3091
+						25000 2810
+						30000 2526
+						35000 2247
+						40000 1982
+						45000 1734
+						50000 1507
+						55000 1305
+						60000 1122
+						65000 964
+						70000 827
+						75000 710
+						80000 606
+						85000 519
+						90000 445
+						95000 382
+						100000 330
+						105000 284
+						110000 245
+						115000 213
+						120000 183
+						125000 161>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 4241
+						0 4063
+						5000 3856
+						10000 3621
+						15000 3364
+						20000 3091
+						25000 2810
+						30000 2526
+						35000 2247
+						40000 1982
+						45000 1734
+						50000 1507
+						55000 1305
+						60000 1122
+						65000 964
+						70000 827
+						75000 710
+						80000 606
+						85000 519
+						90000 445
+						95000 382
+						100000 330
+						105000 284
+						110000 245
+						115000 213
+						120000 183
+						125000 161>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	vmmc-supply = <&mmc1_fixed_power>;
+	vqmmc-supply = <&mmc1_fixed_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	drv-type = <2>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	cap-sdio-irq;
+	non-removable;
+	no-mmc;
+	no-sd;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_wifi: qca-wifi@1 {
+		compatible = "qcom,ath10k";
+		reg = <1>;
+	};
+};
+
+&mt6358_vdram2_reg {
+	regulator-always-on;
+};
+
+&mt6358codec {
+	Avdd-supply = <&mt6358_vaud28_reg>;
+};
+
+&mt6358_vsim1_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsim2_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pio {
+	bt_pins: bt-pins {
+		pins_bt_en {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-low;
+		};
+	};
+
+	ec_ap_int_odl: ec_ap_int_odl {
+		pins1 {
+			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	h1_int_od_l: h1_int_od_l {
+		pins1 {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c5_pins: i2c5 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
+				 <PINMUX_GPIO12__FUNC_SDA6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
+			bias-disable;
+		};
+		pins_spi_mi {
+			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			mediatek,pull-down-adv = <00>;
+		};
+	};
+
+	spi3_pins: spi3 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi4_pins: spi4 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi5_pins: spi5 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins_default: uart0-pins-default {
+		pins_rx {
+			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_default: uart1-pins-default {
+		pins_rx {
+			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins_rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins_cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart1_pins_sleep: uart1-pins-sleep {
+		pins_rx {
+			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins_rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins_cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	wifi_pins_pwrseq: wifi-pins-pwrseq {
+		pins_wifi_enable {
+			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
+			output-low;
+		};
+	};
+
+	wifi_pins_wakeup: wifi-pins-wakeup {
+		pins_wifi_wakeup {
+			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
+			input-enable;
+		};
+	};
+};
+
+&soc_data {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		interrupt-parent = <&pio>;
+		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	w25q64dw: spi-flash@0 {
+		compatible = "winbond,w25q64dw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_odl>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins_default>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	status = "okay";
+	interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
+			      <&pio 121 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth: bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		status = "okay";
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&pio 120 0>;
+		clocks = <&clk32k>;
+		firmware-name = "nvm_00440302_i2s.bin";
+	};
+};
+
+&usb_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1e03c849dc5d..102105871db2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/phy/phy.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -168,7 +169,7 @@
 				min-residency-us = <800>;
 			};
 
-			CLUSTER_SLEEP0: cluster-sleep@0 {
+			CLUSTER_SLEEP0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -176,7 +177,7 @@
 				exit-latency-us = <400>;
 				min-residency-us = <1000>;
 			};
-			CLUSTER_SLEEP1: cluster-sleep@1 {
+			CLUSTER_SLEEP1: cluster-sleep-1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -285,6 +286,12 @@
 			#reset-cells = <1>;
 		};
 
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8183-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
@@ -642,6 +649,36 @@
 			status = "disabled";
 		};
 
+		ssusb: usb@11201000 {
+			compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: xhci@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -678,6 +715,33 @@
 			reg = <0 0x11f10000 0 0x1000>;
 		};
 
+		u3phy: usb-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#phy-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <15>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@0700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		mfgcfg: syscon@13000000 {
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index bcd018c3162b..2273fc5db19c 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index 9f3206c63900..6e5f8465669e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
@@ -39,6 +39,9 @@
 		sor@54540000 {
 			status = "okay";
 
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
@@ -671,7 +674,7 @@
 					regulator-boot-on;
 				};
 
-				ldo0 {
+				avdd_1v05_run: ldo0 {
 					regulator-name = "+1.05_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -781,7 +784,6 @@
 				battery: smart-battery {
 					compatible = "sbs,sbs-battery";
 					reg = <0xb>;
-					battery-name = "battery";
 					sbs,i2c-retry-count = <2>;
 					sbs,poll-retry-count = <10>;
 				/*	power-supplies = <&charger>; */
@@ -893,13 +895,108 @@
 		nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
 	/* WIFI/BT module */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "disabled";
 	};
 
 	/* external SD/MMC */
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
@@ -909,39 +1006,12 @@
 	};
 
 	/* EMMC 4.51 */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb1_vbus>;
-	};
-
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		vbus-supply = <&vdd_run_cam>;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 
@@ -955,17 +1025,10 @@
 		backlight-boot-off;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -991,146 +1054,144 @@
 
 	panel: panel {
 		compatible = "innolux,n116bge";
+		power-supply = <&vdd_3v3_panel>;
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <19000000>;
+		regulator-max-microvolt = <19000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <19000000>;
-			regulator-max-microvolt = <19000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_usb1_vbus: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb1_vbus: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb3_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb3_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_3v3_panel: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_panel: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_hdmi_pll: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
 
-		vdd_hdmi_pll: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
+	vdd_5v0_hdmi: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_5v0_hdmi: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_ts: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_5v0_ts: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+5V_VDD_TS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_3v3_lp0: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 11a1bb428595..e40281510c0c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -17,9 +17,9 @@
 	pcie@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
-		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
@@ -33,11 +33,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
-			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
-			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
 
 		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
 			 <&tegra_car TEGRA124_CLK_AFI>,
@@ -50,9 +50,6 @@
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
-		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
-		phy-names = "pcie";
-
 		pci@1,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
@@ -83,10 +80,12 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		compatible = "nvidia,tegra132-host1x",
+			     "nvidia,tegra124-host1x";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&tegra_car 28>;
@@ -101,9 +100,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -116,9 +114,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
@@ -144,10 +141,11 @@
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
 				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
 				 <&tegra_car TEGRA124_CLK_PLL_DP>,
 				 <&tegra_car TEGRA124_CLK_CLK_M>;
-			clock-names = "sor", "parent", "dp", "safe";
+			clock-names = "sor", "out", "parent", "dp", "safe";
 			resets = <&tegra_car 182>;
 			reset-names = "sor";
 			status = "disabled";
@@ -163,6 +161,11 @@
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
 			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
@@ -607,7 +610,7 @@
 	};
 
 	emc: external-memory-controller@7001b000 {
-		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
+		compatible = "nvidia,tegra132-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_EMC>;
 		clock-names = "emc";
@@ -629,8 +632,6 @@
 			 <&tegra_car 123>,
 			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
-		phy-names = "sata-phy";
 		status = "disabled";
 	};
 
@@ -650,6 +651,41 @@
 		status = "disabled";
 	};
 
+	usb@70090000 {
+		compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
 	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra132-xusb-padctl",
 			     "nvidia,tegra124-xusb-padctl";
@@ -657,40 +693,130 @@
 		resets = <&tegra_car 142>;
 		reset-names = "padctl";
 
-		#phy-cells = <1>;
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
 
-		phys {
-			pcie-0 {
+			ulpi {
 				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			sata-0 {
+			hsic {
 				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			usb3-0 {
+			pcie {
 				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			usb3-1 {
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
 				status = "disabled";
 			};
 
-			utmi-0 {
+			usb2-1 {
 				status = "disabled";
 			};
 
-			utmi-1 {
+			usb2-2 {
 				status = "disabled";
 			};
 
-			utmi-2 {
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
 				status = "disabled";
 			};
 		};
 	};
 
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -701,7 +827,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0200 {
+	mmc@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -712,7 +838,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -723,7 +849,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -736,12 +862,12 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra132-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
-			0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */
+		      <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
 		reg-names = "soctherm-reg", "ccroc-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
-			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		         <&tegra_car TEGRA124_CLK_SOC_THERM>;
 		clock-names = "tsensor", "soctherm";
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
@@ -992,6 +1118,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1030,6 +1157,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1067,6 +1195,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 1af7f9ffb7b6..802b8c52489a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -103,7 +103,7 @@
 	};
 
 	/* SDMMC1 (SD/MMC) */
-	sdhci@3400000 {
+	mmc@3400000 {
 		status = "okay";
 
 		vmmc-supply = <&vdd_sd>;
@@ -119,10 +119,6 @@
 
 		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
-		dvdd-pex-supply = <&vdd_pex>;
-		dvdd-pex-pll-supply = <&vdd_pex>;
-		hvdd-pex-supply = <&vdd_1v8>;
-		hvdd-pex-pll-supply = <&vdd_1v8>;
 		vclamp-usb-supply = <&vdd_1v8>;
 		vddio-hsic-supply = <&gnd>;
 
@@ -175,19 +171,18 @@
 				status = "okay";
 				mode = "otg";
 				vbus-supply = <&vdd_usb0>;
-
 				usb-role-switch;
+
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio
-						     TEGRA186_MAIN_GPIO(X, 7)
-						     GPIO_ACTIVE_LOW>;
-					id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(X, 7)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
-
 			};
 
 			usb2-1 {
@@ -199,6 +194,7 @@
 
 			usb3-0 {
 				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_usb1>;
 				status = "okay";
 			};
 		};
@@ -227,8 +223,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -286,8 +282,8 @@
 		sor@15580000 {
 			status = "okay";
 
-			avdd-io-supply = <&vdd_hdmi_1v05>;
-			vdd-pll-supply = <&vdd_1v8_ap>;
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&ddc>;
@@ -333,62 +329,51 @@
 		};
 	};
 
-	regulators {
-		vdd_sd: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-
-			regulator-name = "SD_CARD_SW_PWR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+	vdd_sd: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD_CARD_SW_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6)
-				      GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-
-			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_hdmi: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-		vdd_usb0: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_USB0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_usb0: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-		vdd_usb1: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			regulator-name = "VDD_USB1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_usb1: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		vin-supply = <&vdd_5v0_sys>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 2fcaa2e64370..53d92fdd7f06 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -9,9 +9,6 @@
 
 	aliases {
 		ethernet0 = "/ethernet@2490000";
-		sdhci0 = "/sdhci@3460000";
-		sdhci1 = "/sdhci@3400000";
-		serial0 = &uarta;
 		i2c0 = "/bpmp/i2c";
 		i2c1 = "/i2c@3160000";
 		i2c2 = "/i2c@c240000";
@@ -20,6 +17,9 @@
 		i2c5 = "/i2c@31c0000";
 		i2c6 = "/i2c@c250000";
 		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		mmc1 = "/mmc@3400000";
+		serial0 = &uarta;
 	};
 
 	chosen {
@@ -27,7 +27,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x2 0x00000000>;
 	};
@@ -50,6 +50,8 @@
 				interrupt-parent = <&gpio>;
 				interrupts = <TEGRA186_MAIN_GPIO(M, 5)
 					      IRQ_TYPE_LEVEL_LOW>;
+
+				#phy-cells = <0>;
 			};
 		};
 	};
@@ -133,7 +135,7 @@
 	};
 
 	/* SDMMC1 (SD/MMC) */
-	sdhci@3400000 {
+	mmc@3400000 {
 		cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
 
@@ -141,12 +143,12 @@
 	};
 
 	/* SDMMC3 (SDIO) */
-	sdhci@3440000 {
+	mmc@3440000 {
 		status = "okay";
 	};
 
 	/* SDMMC4 (eMMC) */
-	sdhci@3460000 {
+	mmc@3460000 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -172,8 +174,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -390,45 +392,33 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gnd: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-
-			regulator-name = "GND";
-			regulator-min-microvolt = <0>;
-			regulator-max-microvolt = <0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	gnd: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_1v8_ap: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_1V8_AP";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+	vdd_1v8_ap: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_1v8>;
-		};
+		vin-supply = <&vdd_1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58100fb9cd8b..34d249d85da7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -60,6 +60,9 @@
 		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 		resets = <&bpmp TEGRA186_RESET_EQOS>;
 		reset-names = "eqos";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_EQOS>;
 		status = "disabled";
 
@@ -139,12 +142,13 @@
 		};
 	};
 
-	memory-controller@2c00000 {
+	mc: memory-controller@2c00000 {
 		compatible = "nvidia,tegra186-mc";
 		reg = <0x0 0x02c00000 0x0 0xb0000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
+		#interconnect-cells = <1>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 
@@ -163,6 +167,8 @@
 			clocks = <&bpmp TEGRA186_CLK_EMC>;
 			clock-names = "emc";
 
+			#interconnect-cells = <0>;
+
 			nvidia,bpmp = <&bpmp>;
 		};
 	};
@@ -327,7 +333,7 @@
 		status = "disabled";
 	};
 
-	sdmmc1: sdhci@3400000 {
+	sdmmc1: mmc@3400000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03400000 0x0 0x10000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,6 +341,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC1>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc1_3v3>;
@@ -353,7 +362,7 @@
 		status = "disabled";
 	};
 
-	sdmmc2: sdhci@3420000 {
+	sdmmc2: mmc@3420000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03420000 0x0 0x10000>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -361,6 +370,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC2>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc2_3v3>;
@@ -374,7 +386,7 @@
 		status = "disabled";
 	};
 
-	sdmmc3: sdhci@3440000 {
+	sdmmc3: mmc@3440000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03440000 0x0 0x10000>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,6 +394,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC3>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc3_3v3>;
@@ -397,7 +412,7 @@
 		status = "disabled";
 	};
 
-	sdmmc4: sdhci@3460000 {
+	sdmmc4: mmc@3460000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03460000 0x0 0x10000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -408,6 +423,9 @@
 		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
 		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC4>;
 		nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
 		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
@@ -436,6 +454,9 @@
 			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
 		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_HDA>;
 		status = "disabled";
 	};
@@ -547,8 +568,7 @@
 		      <0x0 0x03538000 0x0 0x1000>;
 		reg-names = "hcd", "fpci";
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
 			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
 			 <&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -564,6 +584,9 @@
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
 				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
 		power-domain-names = "xusb_host", "xusb_ss";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -752,9 +775,9 @@
 		compatible = "nvidia,tegra186-pcie";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
 		device_type = "pci";
-		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x40000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
@@ -769,22 +792,26 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000   /* non-prefetchable memory (127 MiB) */
-			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+		ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */
+			 <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0x0        0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */
+			 <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
 
-		clocks = <&bpmp TEGRA186_CLK_AFI>,
-			 <&bpmp TEGRA186_CLK_PCIE>,
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>,
 			 <&bpmp TEGRA186_CLK_PLLE>;
-		clock-names = "afi", "pex", "pll_e";
+		clock-names = "pex", "afi", "pll_e";
 
-		resets = <&bpmp TEGRA186_RESET_AFI>,
-			 <&bpmp TEGRA186_RESET_PCIE>,
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
 			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
-		reset-names = "afi", "pex", "pcie_x";
+		reset-names = "pex", "afi", "pcie_x";
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>;
+		interconnect-names = "dma-mem", "write";
 
 		iommus = <&smmu TEGRA186_SID_AFI>;
 		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
@@ -906,12 +933,13 @@
 	};
 
 	host1x@13e00000 {
-		compatible = "nvidia,tegra186-host1x", "simple-bus";
+		compatible = "nvidia,tegra186-host1x";
 		reg = <0x0 0x13e00000 0x0 0x10000>,
 		      <0x0 0x13e10000 0x0 0x10000>;
 		reg-names = "hypervisor", "vm";
 		interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 		             <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&bpmp TEGRA186_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
@@ -921,6 +949,10 @@
 		#size-cells = <1>;
 
 		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
+		interconnect-names = "dma-mem";
+
 		iommus = <&smmu TEGRA186_SID_HOST1X>;
 
 		dpaux1: dpaux@15040000 {
@@ -958,7 +990,7 @@
 		};
 
 		display-hub@15200000 {
-			compatible = "nvidia,tegra186-display", "simple-bus";
+			compatible = "nvidia,tegra186-display";
 			reg = <0x15200000 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
@@ -992,6 +1024,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1008,6 +1043,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1024,6 +1062,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&sor0 &sor1>;
@@ -1056,6 +1097,9 @@
 			reset-names = "vic";
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>;
+			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu TEGRA186_SID_VIC>;
 		};
 
@@ -1199,8 +1243,8 @@
 		compatible = "nvidia,gp10b";
 		reg = <0x0 0x17000000 0x0 0x1000000>,
 		      <0x0 0x18000000 0x0 0x1000000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "stall", "nonstall";
 
 		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
@@ -1211,25 +1255,28 @@
 		status = "disabled";
 
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>;
+		interconnect-names = "dma-mem", "write-0", "read-1", "write-1";
 	};
 
-	sysram@30000000 {
+	sram@30000000 {
 		compatible = "nvidia,tegra186-sysram", "mmio-sram";
 		reg = <0x0 0x30000000 0x0 0x50000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x30000000 0x50000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4e000 0x0 0x1000>;
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4f000 0x0 0x1000>;
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
 		};
@@ -1237,6 +1284,11 @@
 
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index b96eb4e14556..4c005b811233 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -8,18 +8,18 @@
 	compatible = "nvidia,p2888", "nvidia,tegra194";
 
 	aliases {
-		ethernet0 = "/cbb@0/ethernet@2490000";
-		sdhci0 = "/cbb@0/sdhci@3460000";
-		sdhci1 = "/cbb@0/sdhci@3400000";
-		serial0 = &tcu;
+		ethernet0 = "/bus@0/ethernet@2490000";
 		i2c0 = "/bpmp/i2c";
-		i2c1 = "/cbb@0/i2c@3160000";
-		i2c2 = "/cbb@0/i2c@c240000";
-		i2c3 = "/cbb@0/i2c@3180000";
-		i2c4 = "/cbb@0/i2c@3190000";
-		i2c5 = "/cbb@0/i2c@31c0000";
-		i2c6 = "/cbb@0/i2c@c250000";
-		i2c7 = "/cbb@0/i2c@31e0000";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+		serial0 = &tcu;
 	};
 
 	chosen {
@@ -27,7 +27,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cbb@0 {
+	bus@0 {
 		ethernet@2490000 {
 			status = "okay";
 
@@ -44,6 +44,7 @@
 					reg = <0x0>;
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
 				};
 			};
 		};
@@ -57,12 +58,12 @@
 		};
 
 		/* SDMMC1 (SD/MMC) */
-		sdhci@3400000 {
+		mmc@3400000 {
 			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
 		};
 
 		/* SDMMC4 (eMMC) */
-		sdhci@3460000 {
+		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
 			non-removable;
@@ -292,65 +293,49 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-
-			regulator-name = "VIN_SYS_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_hdmi: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-
-			regulator-name = "VDD_5V0_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_3v3_pcie: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-
-			regulator-name = "PEX_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-			enable-active-high;
-		};
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_12v_pcie: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
+	vdd_hdmi: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			regulator-name = "VDD_12V";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
+	vdd_3v3_pcie: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PEX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
 
-		vdd_5v_sata: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
+	vdd_12v_pcie: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_5V_SATA";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_5v_sata: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index e15d1eac05f5..90b6ea5467fa 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -10,7 +10,7 @@
 	model = "NVIDIA Jetson AGX Xavier Developer Kit";
 	compatible = "nvidia,p2972-0000", "nvidia,tegra194";
 
-	cbb@0 {
+	bus@0 {
 		aconnect@2900000 {
 			status = "okay";
 
@@ -28,7 +28,7 @@
 		};
 
 		/* SDMMC1 (SD/MMC) */
-		sdhci@3400000 {
+		mmc@3400000 {
 			status = "okay";
 		};
 
@@ -93,10 +93,10 @@
 		usb@3610000 {
 			status = "okay";
 
-			phys =	<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
-				<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
-				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
-				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
 			phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
 		};
 
@@ -145,8 +145,8 @@
 			sor@15b80000 {
 				status = "okay";
 
-				avdd-io-supply = <&vdd_1v0>;
-				vdd-pll-supply = <&vdd_1v8hs>;
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
 				hdmi-supply = <&vdd_hdmi>;
 
 				nvidia,ddc-i2c-bus = <&ddc>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
new file mode 100644
index 000000000000..c1c589805d6b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra194-p3668-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit";
+	compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		ddc: i2c@3190000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "jetson-xavier-nx-hda";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-1", "usb2-2", "usb3-2";
+		};
+
+		pwm@32d0000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* HDMI */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+
+	pcie@14160000 {
+		status = "okay";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		phys = <&p2u_hsio_11>;
+		phy-names = "p2u-0";
+	};
+
+	pcie@141a0000 {
+		status = "okay";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
+	pcie_ep@141a0000 {
+		status = "disabled";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+					      GPIO_ACTIVE_HIGH>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
+	fan: fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm6 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_sys: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_ao: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
new file mode 100644
index 000000000000..10cb836aea7e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson Xavier NX";
+	compatible = "nvidia,p3668-0000", "nvidia,tegra194";
+
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
+		rtc1 = "/bus@0/rtc@c2a0000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@c280000 {
+			status = "okay";
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+			vmmc-supply = <&vdd_3v3_sd>;
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+		};
+	};
+
+	vdd_3v3_sd: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 4bc187a4eacd..48160f48003a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -16,7 +16,7 @@
 	#size-cells = <2>;
 
 	/* control backbone */
-	cbb@0 {
+	bus@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -59,6 +59,9 @@
 			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 			resets = <&bpmp TEGRA194_RESET_EQOS>;
 			reset-names = "eqos";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>;
+			interconnect-names = "dma-mem", "write";
 			status = "disabled";
 
 			snps,write-requests = <1>;
@@ -141,8 +144,8 @@
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000
-			       0xc300000 0x4000>;
+			reg = <0x2430000 0x17000>,
+			      <0xc300000 0x4000>;
 
 			status = "okay";
 
@@ -176,6 +179,8 @@
 			reg = <0x02c00000 0x100000>,
 			      <0x02b80000 0x040000>,
 			      <0x01700000 0x100000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
 			status = "disabled";
 
 			#address-cells = <2>;
@@ -209,6 +214,8 @@
 				clocks = <&bpmp TEGRA194_CLK_EMC>;
 				clock-names = "emc";
 
+				#interconnect-cells = <0>;
+
 				nvidia,bpmp = <&bpmp>;
 			};
 		};
@@ -449,14 +456,17 @@
 			#pwm-cells = <2>;
 		};
 
-		sdmmc1: sdhci@3400000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc1: mmc@3400000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03400000 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -471,14 +481,17 @@
 			status = "disabled";
 		};
 
-		sdmmc3: sdhci@3440000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc3: mmc@3440000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03440000 0x10000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -494,8 +507,8 @@
 			status = "disabled";
 		};
 
-		sdmmc4: sdhci@3460000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc4: mmc@3460000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03460000 0x10000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
@@ -506,6 +519,9 @@
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
@@ -534,6 +550,9 @@
 				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
 			reset-names = "hda", "hda2codec_2x", "hda2hdmi";
 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
 			status = "disabled";
 		};
 
@@ -669,8 +688,7 @@
 			reg-names = "hcd", "fpci";
 
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
 				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
@@ -981,10 +999,7 @@
 			reg-names = "security", "gpio";
 			reg = <0xc2f0000 0x1000>,
 			      <0xc2f1000 0x1000>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -1017,12 +1032,13 @@
 		};
 
 		host1x@13e00000 {
-			compatible = "nvidia,tegra194-host1x", "simple-bus";
+			compatible = "nvidia,tegra194-host1x";
 			reg = <0x13e00000 0x10000>,
 			      <0x13e10000 0x10000>;
 			reg-names = "hypervisor", "vm";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt", "host1x";
 			clocks = <&bpmp TEGRA194_CLK_HOST1X>;
 			clock-names = "host1x";
 			resets = <&bpmp TEGRA194_RESET_HOST1X>;
@@ -1032,9 +1048,11 @@
 			#size-cells = <1>;
 
 			ranges = <0x15000000 0x15000000 0x01000000>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
 
 			display-hub@15200000 {
-				compatible = "nvidia,tegra194-display", "simple-bus";
+				compatible = "nvidia,tegra194-display";
 				reg = <0x15200000 0x00040000>;
 				resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
 					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
@@ -1067,6 +1085,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <0>;
@@ -1082,6 +1103,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <1>;
@@ -1097,6 +1121,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <2>;
@@ -1112,6 +1139,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <3>;
@@ -1128,6 +1158,9 @@
 				reset-names = "vic";
 
 				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
 			};
 
 			dpaux0: dpaux@155c0000 {
@@ -1362,15 +1395,49 @@
 				nvidia,interface = <3>;
 			};
 		};
+
+		gpu@17000000 {
+			compatible = "nvidia,gv11b";
+			reg = <0x17000000 0x10000000>,
+			      <0x18000000 0x10000000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "stall", "nonstall";
+			clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+				 <&bpmp TEGRA194_CLK_GPU_PWR>,
+				 <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "gpu", "pwr", "fuse";
+			resets = <&bpmp TEGRA194_RESET_GPU>;
+			reset-names = "gpu";
+			dma-coherent;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>;
+			interconnect-names = "dma-mem", "read-0-hp", "write-0",
+					     "read-1", "read-1-hp", "write-1",
+					     "read-2", "read-2-hp", "write-2",
+					     "read-3", "read-3-hp", "write-3";
+		};
 	};
 
 	pcie@14100000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x30040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1389,8 +1456,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_1>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1404,18 +1471,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x30100000 0x0  0x30100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14120000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x32040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1434,8 +1506,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_2>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1449,18 +1521,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x32100000 0x0  0x32100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14140000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x34040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1479,8 +1556,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_3>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1494,18 +1571,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x34100000 0x0  0x34100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14160000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
-		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1524,8 +1606,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1539,18 +1621,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x36100000 0x0  0x36100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14180000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1569,8 +1656,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1584,18 +1671,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@141a0000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1611,15 +1703,15 @@
 		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>,
-			<&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
+			 <&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
 		clock-names = "core", "core_m";
 
 		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
 			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		nvidia,bpmp = <&bpmp 5>;
@@ -1633,18 +1725,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x3a100000 0x0  0x3a100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie_ep@14160000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
-		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1673,10 +1770,10 @@
 	pcie_ep@14180000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1705,10 +1802,10 @@
 	pcie_ep@141a0000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1737,22 +1834,20 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 	};
 
-	sysram@40000000 {
+	sram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40000000 0x50000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			compatible = "nvidia,tegra194-bpmp-shmem";
+		cpu_bpmp_tx: sram@4e000 {
 			reg = <0x4e000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			compatible = "nvidia,tegra194-bpmp-shmem";
+		cpu_bpmp_rx: sram@4f000 {
 			reg = <0x4f000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
@@ -1767,6 +1862,11 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 
 		bpmp_i2c: i2c {
 			compatible = "nvidia,tegra186-bpmp-i2c";
@@ -1782,6 +1882,8 @@
 	};
 
 	cpus {
+		compatible = "nvidia,tegra194-ccplex";
+		nvidia,bpmp = <&bpmp>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cc6ed45a2b48..6a4b50aaa25d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
@@ -274,8 +274,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -293,24 +293,17 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 		vqmmc-supply = <&vdd_1v8>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -342,18 +335,15 @@
 		method = "smc";
 	};
 
-	regulators {
-		vdd_gpu: regulator@100 {
-			compatible = "pwm-regulator";
-			reg = <100>;
-			pwms = <&pwm 1 4880>;
-			regulator-name = "VDD_GPU";
-			regulator-min-microvolt = <710000>;
-			regulator-max-microvolt = <1320000>;
-			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			regulator-ramp-delay = <80>;
-			regulator-enable-ramp-delay = <2000>;
-			regulator-settling-time-us = <160>;
-		};
+	vdd_gpu: regulator@100 {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 4880>;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index ea0e1efa6973..56adf287a82c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -87,8 +87,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -122,7 +122,7 @@
 			status = "okay";
 		};
 
-		agic@702f9000 {
+		interrupt-controller@702f9000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
index d0dc03923723..58aa0518965e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -14,7 +14,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
@@ -34,23 +34,16 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b57d837d5fc7..e18e1a9a3011 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -27,8 +27,8 @@
 		sor@54580000 {
 			status = "okay";
 
-			avdd-io-supply = <&avdd_1v05>;
-			vdd-pll-supply = <&vdd_1v8>;
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
@@ -1323,6 +1323,14 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
 	};
 
 	/* HDMI DDC */
@@ -1461,17 +1469,17 @@
 			usb2-0 {
 				status = "okay";
 				vbus-supply = <&vdd_usb_vbus_otg>;
+				usb-role-switch;
 				mode = "otg";
 
-				usb-role-switch;
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio TEGRA_GPIO(Z, 0)
-						     GPIO_ACTIVE_LOW>;
-					id-gpio = <&pmic 0 0>;
+					vbus-gpios = <&gpio TEGRA_GPIO(Z, 0)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -1505,7 +1513,7 @@
 	};
 
 	/* MMC/SD */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -1523,152 +1531,6 @@
 		hvdd-usb-supply = <&vdd_1v8>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_sys_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VDD_SYS_MUX";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_sys_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "VDD_3V3_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_sys_mux>;
-
-			regulator-enable-ramp-delay = <160>;
-			regulator-disable-ramp-delay = <10000>;
-		};
-
-		vdd_5v0_io: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "VDD_5V0_IO_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_3v3_sd: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "VDD_3V3_SD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-
-			regulator-enable-ramp-delay = <472>;
-			regulator-disable-ramp-delay = <4880>;
-		};
-
-		vdd_dsi_csi: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "AVDD_DSI_CSI_1V2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			vin-supply = <&vdd_sys_1v2>;
-		};
-
-		vdd_3v3_dis: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDD_DIS_3V3_LCD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_1v8_dis: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "VDD_LCD_1V8_DIS";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_1v8>;
-		};
-
-		vdd_5v0_rtl: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "RTL_5V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb_vbus: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "USB_VBUS_EN1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb_vbus_otg: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "USB_VBUS_EN0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_hdmi: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -1692,4 +1554,162 @@
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+
+	vdd_sys_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS_MUX";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+	};
+
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+
+		regulator-enable-ramp-delay = <160>;
+		regulator-disable-ramp-delay = <10000>;
+	};
+
+	vdd_5v0_io: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_IO_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sd: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+
+		regulator-enable-ramp-delay = <472>;
+		regulator-disable-ramp-delay = <4880>;
+	};
+
+	vdd_dsi_csi: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sys_1v2>;
+	};
+
+	vdd_3v3_dis: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_DIS_3V3_LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_dis: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_1V8_DIS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_5v0_rtl: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "RTL_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus_otg: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cam_1v2: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&exp2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_2v8: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&exp1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_1v8: regulator@13 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&exp2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index 88a4b9333d84..41beab626d95 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -16,7 +16,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
@@ -1328,7 +1328,7 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1343,12 +1343,12 @@
 			pinctrl-0 = <&max77620_default>;
 
 			max77620_default: pinmux@0 {
-				pin_gpio0 {
+				gpio0 {
 					pins = "gpio0";
 					function = "gpio";
 				};
 
-				pin_gpio1 {
+				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
 					drive-push-pull = <1>;
@@ -1357,37 +1357,37 @@
 					maxim,active-fps-power-down-slot = <0>;
 				};
 
-				pin_gpio2_3 {
-					pins = "gpio2", "gpio3";
+				gpio2 {
+					pins = "gpio2";
 					function = "fps-out";
 					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
-				pin_gpio4 {
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};
 
-				pin_gpio5_6_7 {
+				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
-
-				pin_gpio2 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
-
-				pin_gpio3 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
 			};
 
-			spmic-default-output-high {
+			gpio@0 {
 				gpio-hog;
 				output-high;
-				gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>;
+				gpios = <2 GPIO_ACTIVE_HIGH>,
+					<7 GPIO_ACTIVE_HIGH>;
 			};
 
 			fps {
@@ -1580,23 +1580,16 @@
 		status = "okay";
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -1642,223 +1635,198 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		device_type = "fixed-regulators";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		battery_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-ac-bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	battery_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ac-bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd-3v3";
-			regulator-enable-ramp-delay = <160>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-
-			gpio = <&max77620 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3";
+		regulator-enable-ramp-delay = <160>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 
-		max77620_gpio7: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "max77620-gpio7";
-			regulator-enable-ramp-delay = <240>;
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			vin-supply = <&max77620_ldo0>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&max77620 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		lcd_bl_en: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "lcd-bl-en";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
+	max77620_gpio7: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "max77620-gpio7";
+		regulator-enable-ramp-delay = <240>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&max77620_ldo0>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	lcd_bl_en: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-bl-en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 
-		en_vdd_sd: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "en-vdd-sd";
-			regulator-enable-ramp-delay = <472>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3>;
-
-			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		en_vdd_cam: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "en-vdd-cam";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+	en_vdd_sd: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-sd";
+		regulator-enable-ramp-delay = <472>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
 
-			gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_sys_boost: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd-sys-boost";
-			regulator-enable-ramp-delay = <3090>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-
-			gpio = <&max77620 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	en_vdd_cam: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 
-		vdd_hdmi: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "vdd-hdmi";
-			regulator-enable-ramp-delay = <468>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&vdd_sys_boost>;
-			regulator-boot-on;
-
-			gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		en_vdd_cpu_fixed: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "vdd-cpu-fixed";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
+	vdd_sys_boost: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys-boost";
+		regulator-enable-ramp-delay = <3090>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 
-		vdd_aux_3v3: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "aux-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_snsr_pm: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "snsr_pm";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+	vdd_hdmi: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-hdmi";
+		regulator-enable-ramp-delay = <468>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_sys_boost>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			enable-active-high;
-		};
+	en_vdd_cpu_fixed: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-fixed";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
 
-		vdd_usb_5v0: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			status = "disabled";
-			regulator-name = "vdd-usb-5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&vdd_3v3>;
+	vdd_aux_3v3: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "aux-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-			enable-active-high;
-		};
+	vdd_snsr_pm: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "snsr_pm";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_cdc_1v2_aud: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			status = "disabled";
-			regulator-name = "vdd_cdc_1v2_aud";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			startup-delay-us = <250000>;
+		enable-active-high;
+	};
 
-			enable-active-high;
-		};
+	vdd_usb_5v0: regulator@11 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd-usb-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3>;
 
-		vdd_disp_3v0: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "vdd-disp-3v0";
-			regulator-enable-ramp-delay = <232>;
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-
-			gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		enable-active-high;
+	};
 
-		vdd_fan: regulator@13 {
-			compatible = "regulator-fixed";
-			reg = <13>;
-			regulator-name = "vdd-fan";
-			regulator-enable-ramp-delay = <284>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_cdc_1v2_aud: regulator@101 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd_cdc_1v2_aud";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		startup-delay-us = <250000>;
 
-			gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		enable-active-high;
+	};
 
-		usb_vbus1: regulator@14 {
-			compatible = "regulator-fixed";
-			reg = <14>;
-			regulator-name = "usb-vbus1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_disp_3v0: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-disp-3v0";
+		regulator-enable-ramp-delay = <232>;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
 
-			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+		gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		usb_vbus2: regulator@15 {
-			compatible = "regulator-fixed";
-			reg = <15>;
-			regulator-name = "usb-vbus2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_fan: regulator@13 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-fan";
+		regulator-enable-ramp-delay = <284>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+		gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_3v3_eth: regulator@16 {
-			compatible = "regulator-fixed";
-			reg = <16>;
-			regulator-name = "vdd-3v3-eth-a02";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+	usb_vbus1: regulator@14 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	usb_vbus2: regulator@15 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vdd_3v3_eth: regulator@16 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3-eth-a02";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 9bc52fdb393c..2282ea1c6279 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
@@ -64,6 +64,16 @@
 			status = "okay";
 		};
 
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_sys_1v2>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
 		sor@54540000 {
 			status = "okay";
 
@@ -77,8 +87,8 @@
 		sor@54580000 {
 			status = "okay";
 
-			avdd-io-supply = <&avdd_1v05>;
-			vdd-pll-supply = <&vdd_1v8>;
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
@@ -101,6 +111,22 @@
 		status = "okay";
 	};
 
+	pinmux@700008d4 {
+		dvfs_pwm_active_state: dvfs_pwm_active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
 	/* debug port */
 	serial@70006000 {
 		status = "okay";
@@ -119,8 +145,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -130,8 +156,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -513,15 +539,15 @@
 			usb2-0 {
 				status = "okay";
 				mode = "peripheral";
-
 				usb-role-switch;
+
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio TEGRA_GPIO(CC, 4)
-						     GPIO_ACTIVE_LOW>;
+					vbus-gpios = <&gpio TEGRA_GPIO(CC, 4)
+						      GPIO_ACTIVE_LOW>;
 				};
 			};
 
@@ -543,7 +569,7 @@
 		};
 	};
 
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -553,15 +579,7 @@
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
-	usb@700d0000 {
-		status = "okay";
-		phys = <&micro_b>;
-		phy-names = "usb2-0";
-		avddio-usb-supply = <&vdd_3v3_sys>;
-		hvdd-usb-supply = <&vdd_1v8>;
-	};
-
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -574,17 +592,39 @@
 		wakeup-source;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	clock@70110000 {
+		status = "okay";
 
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -698,120 +738,109 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
 
-		vdd_5v0_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
 
-		vdd_3v3_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_3V3_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-enable-ramp-delay = <240>;
-			regulator-disable-ramp-delay = <11340>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <240>;
+		regulator-disable-ramp-delay = <11340>;
+		regulator-always-on;
+		regulator-boot-on;
 
-		vdd_3v3_sd: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_3V3_SD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_3v3_sd: regulator@2 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_3v3_sys>;
-		};
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_hdmi: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
+		gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_hdmi: regulator@3 {
+		compatible = "regulator-fixed";
 
-		vdd_hub_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			regulator-name = "VDD_HUB_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_hub_3v3: regulator@4 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_HUB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_cpu: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
+		gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_CPU";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_cpu: regulator@5 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_CPU";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
 
-		vdd_gpu: regulator@6 {
-			compatible = "pwm-regulator";
-			reg = <6>;
-			pwms = <&pwm 1 4880>;
-			regulator-name = "VDD_GPU";
-			regulator-min-microvolt = <710000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-ramp-delay = <80>;
-			regulator-enable-ramp-delay = <2000>;
-			regulator-settling-time-us = <160>;
-			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-		avdd_io_edp_1v05: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			regulator-name = "AVDD_IO_EDP_1V05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
+	vdd_gpu: regulator@6 {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 4880>;
 
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
 
-			vin-supply = <&avdd_1v05_pll>;
-		};
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	avdd_io_edp_1v05: regulator@7 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "AVDD_IO_EDP_1V05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&avdd_1v05_pll>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 2faab6390552..bd78378248a6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1330,7 +1330,6 @@
 				battery: bq27742@55 {
 					compatible = "ti,bq27742";
 					reg = <0x55>;
-					battery-name = "battery";
 				};
 			};
 		};
@@ -1355,11 +1354,11 @@
 			maxim,enable-active-discharge;
 			maxim,enable-bias-control;
 			maxim,enable-etr;
-			maxim,enable-gpio = <&max77620 5 0>;
+			maxim,enable-gpio = <&pmic 5 0>;
 			maxim,externally-enable;
 		};
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1373,8 +1372,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux@0 {
-				pin_gpio {
+			max77620_default: pinmux {
+				gpio0_1_2_7 {
 					pins = "gpio0", "gpio1", "gpio2", "gpio7";
 					function = "gpio";
 				};
@@ -1384,7 +1383,7 @@
 				 * sequence, So it must be sequenced up (automatically
 				 * set by OTP) and down properly.
 				 */
-				pin_gpio3 {
+				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
 					drive-open-drain = <1>;
@@ -1393,13 +1392,13 @@
 					maxim,active-fps-power-down-slot = <2>;
 				};
 
-				pin_gpio5_6 {
+				gpio5_6 {
 					pins = "gpio5", "gpio6";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
 
-				pin_32k {
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};
@@ -1697,7 +1696,7 @@
 		};
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
@@ -1722,22 +1721,15 @@
 			status = "okay";
 		};
 
-		agic@702f9000 {
+		interrupt-controller@702f9000 {
 			status = "okay";
 		};
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -1815,88 +1807,73 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		device_type = "fixed-regulators";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ppvar_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "PPVAR_SYS";
-			regulator-min-microvolt = <4400000>;
-			regulator-max-microvolt = <4400000>;
-			regulator-always-on;
-		};
+	ppvar_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "PPVAR_SYS";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		regulator-always-on;
+	};
 
-		pplcd_vdd: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "PPLCD_VDD";
-			regulator-min-microvolt = <4400000>;
-			regulator-max-microvolt = <4400000>;
-			gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	pplcd_vdd: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "PPLCD_VDD";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		pp3000_always: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "PP3000_ALWAYS";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
+	pp3000_always: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3000_ALWAYS";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
 
-		pp3300: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PP3300";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-		};
+	pp3300: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
 
-		pp5000: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "PP5000";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	pp5000: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		pp1800_lcdio: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "PP1800_LCDIO";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	pp1800_lcdio: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_LCDIO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		pp1800_cam: regulator@6 {
-			compatible = "regulator-fixed";
-			reg= <6>;
-			regulator-name = "PP1800_CAM";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
-			enable-active-high;
-		};
+	pp1800_cam: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_CAM";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+		enable-active-high;
+	};
 
-		usbc_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "USBC_VBUS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	usbc_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "USBC_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 08655081f72d..829f786af133 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -18,9 +18,9 @@
 	pcie@1003000 {
 		compatible = "nvidia,tegra210-pcie";
 		device_type = "pci";
-		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
@@ -34,11 +34,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
-			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
-			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
 
 		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
 			 <&tegra_car TEGRA210_CLK_AFI>,
@@ -86,10 +86,11 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra210-host1x", "simple-bus";
+		compatible = "nvidia,tegra210-host1x";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&tegra_car 28>;
@@ -186,9 +187,8 @@
 			compatible = "nvidia,tegra210-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA210_CLK_DISP1>,
-				 <&tegra_car TEGRA210_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>;
+			clock-names = "dc";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -201,9 +201,8 @@
 			compatible = "nvidia,tegra210-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA210_CLK_DISP2>,
-				 <&tegra_car TEGRA210_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>;
+			clock-names = "dc";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
@@ -326,7 +325,7 @@
 		};
 
 		dpaux: dpaux@545c0000 {
-			compatible = "nvidia,tegra124-dpaux";
+			compatible = "nvidia,tegra210-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
@@ -362,6 +361,9 @@
 			compatible = "nvidia,tegra210-isp";
 			reg = <0x0 0x54600000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPA>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
 			status = "disabled";
 		};
 
@@ -369,6 +371,9 @@
 			compatible = "nvidia,tegra210-isp";
 			reg = <0x0 0x54680000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPB>;
+			resets = <&tegra_car 3>;
+			reset-names = "isp";
 			status = "disabled";
 		};
 
@@ -376,7 +381,16 @@
 			compatible = "nvidia,tegra210-i2c-vi";
 			reg = <0x0 0x546c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VI_I2C>,
+				 <&tegra_car TEGRA210_CLK_I2CSLOW>;
+			clock-names = "div-clk", "slow";
+			resets = <&tegra_car 208>;
+			reset-names = "i2c";
+			power-domains = <&pd_venc>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 
@@ -998,8 +1012,8 @@
 			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
@@ -1007,7 +1021,7 @@
 			 <&tegra_car TEGRA210_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_ss_src", "xusb_ss_div2",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -1176,8 +1190,8 @@
 		};
 	};
 
-	sdhci@700b0000 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0000 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -1204,8 +1218,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0200 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0200 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
@@ -1221,8 +1235,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0400 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0400 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
@@ -1244,8 +1258,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0600 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0600 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
@@ -1356,7 +1370,7 @@
 			status = "disabled";
 		};
 
-		agic: agic@702f9000 {
+		agic: interrupt-controller@702f9000 {
 			compatible = "nvidia,tegra210-agic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -1547,8 +1561,8 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra210-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
-			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
 		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..d8f1466e6758 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -9,13 +9,21 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8a4b790aa7ff..194343510dcb 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -453,22 +453,23 @@
 
 		*/
 
-                sound: sound {
-                        compatible = "qcom,apq8016-sbc-sndcard";
-                        reg = <0x07702000 0x4>, <0x07702004 0x4>;
-                        reg-names = "mic-iomux", "spkr-iomux";
-
-                        status = "okay";
-                        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-                        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
-                        pinctrl-names = "default", "sleep";
-                        qcom,model = "DB410c";
-                        qcom,audio-routing =
-                                "AMIC2", "MIC BIAS Internal2",
-                                "AMIC3", "MIC BIAS External1";
+		sound: sound {
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+
+			status = "okay";
+			pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+			pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+			pinctrl-names = "default", "sleep";
+			qcom,model = "DB410c";
+			qcom,audio-routing =
+				"AMIC2", "MIC BIAS Internal2",
+				"AMIC3", "MIC BIAS External1";
+
 			external-dai-link@0 {
 				link-name = "ADV7533";
-				cpu { /* QUAT */
+				cpu {
 					sound-dai = <&lpass MI2S_QUATERNARY>;
 				};
 				codec {
@@ -476,26 +477,26 @@
 				};
 			};
 
-                        internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
-                                link-name = "WCD";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_PRIMARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-                                };
-                        };
-
-                        internal-codec-capture-dai-link@0 {             /* I2S - Internal codec */
-                                link-name = "WCD-Capture";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_TERTIARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
-                                };
-                        };
-                };
+			internal-codec-playback-dai-link@0 {
+				link-name = "WCD";
+				cpu {
+					sound-dai = <&lpass MI2S_PRIMARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+				};
+			};
+
+			internal-codec-capture-dai-link@0 {
+				link-name = "WCD-Capture";
+				cpu {
+					sound-dai = <&lpass MI2S_TERTIARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+				};
+			};
+		};
 
 		spmi@200f000 {
 			pm8916@0 {
@@ -650,9 +651,9 @@
 };
 
 &wcd_codec {
-        status = "okay";
-        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-        clock-names = "mclk";
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
@@ -778,135 +779,120 @@
 	};
 };
 
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&i2c2_default {
+	drive-strength = <16>;
+};
+
+&i2c4_default {
+	drive-strength = <16>;
+};
+
+&i2c6_default {
+	drive-strength = <16>;
+};
+
 &msmgpio {
 	msmgpio_leds: msmgpio-leds {
-		pinconf {
-			pins = "gpio21", "gpio120";
-			function = "gpio";
-			output-low;
-		};
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
 	};
 
 	usb_id_default: usb-id-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio121";
-		};
+		pins = "gpio121";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio121";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
 	};
 
 	adv7533_int_active: adv533-int-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	adv7533_int_suspend: adv7533-int-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	adv7533_switch_active: adv7533-switch-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	adv7533_switch_suspend: adv7533-switch-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	msm_key_volp_n_default: msm-key-volp-n-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
 	};
 };
 
 &pm8916_gpios {
 	usb_hub_reset_pm: usb-hub-reset-pm {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-disable;
-			output-high;
-		};
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
 	};
 
 	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
 	};
 
 	usb_sw_sel_pm: usb-sw-sel-pm {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-high;
-		};
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
 	};
 
 	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-low;
-		};
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
 	};
 
 	pm8916_gpios_leds: pm8916-gpios-leds {
-		pinconf {
-			pins = "gpio1", "gpio2";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
 	};
 };
 
@@ -915,19 +901,17 @@
 	pinctrl-0 = <&ls_exp_gpio_f>;
 
 	ls_exp_gpio_f: pm8916-mpp4 {
-		pinconf {
-			pins = "mpp4";
-			function = "digital";
-			output-low;
-			power-source = <PM8916_MPP_L5>;	// 1.8V
-		};
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	// 1.8V
 	};
 
 	pm8916_mpps_leds: pm8916-mpps-leds {
-		pinconf {
-			pins = "mpp2", "mpp3";
-			function = "digital";
-			output-low;
-		};
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6754cb0638f4..f4a76162ab5f 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -82,3 +82,31 @@
 		nand-bus-width = <8>;
 	};
 };
+
+&sdhc_1 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&ssphy_1 {
+	status = "ok";
+};
+
+&usb_0 {
+	status = "ok";
+};
+
+&usb_1 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5303821300b4..96a5ec89b5f0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -82,6 +82,91 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		ssphy_1: phy@58000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB1_PHY_BCR>,
+				<&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb1_ssphy: lane@58200 {
+				reg = <0x00058200 0x130>,       /* Tx */
+				      <0x00058400 0x200>,     /* Rx */
+				      <0x00058800 0x1f8>,     /* PCS  */
+				      <0x00058600 0x044>;     /* PCS misc*/
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb1_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_1: phy@59000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00059000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@78000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB0_PHY_BCR>,
+				<&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: lane@78200 {
+				reg = <0x00078200 0x130>,       /* Tx */
+				      <0x00078400 0x200>,     /* Rx */
+				      <0x00078800 0x1f8>,     /* PCS  */
+				      <0x00078600 0x044>;     /* PCS misc*/
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: phy@79000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+		};
+
 		pcie_phy0: phy@86000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
 			reg = <0x00086000 0x1000>;
@@ -169,6 +254,28 @@
 			#reset-cells = <0x1>;
 		};
 
+		sdhc_1: sdhci@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&xo>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "xo", "iface", "core";
+			max-frequency = <384000000>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
 		blsp_dma: dma@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x2b000>;
@@ -294,6 +401,88 @@
 			status = "disabled";
 		};
 
+		usb_0: usb@8af8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb_1: usb@8cf8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: dwc3@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8c00000 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d5230cb76eb1..9f2c8e94fd26 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -108,31 +108,6 @@
 	};
 };
 
-&msmgpio {
-	gpio_keys_default: gpio-keys-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	usb_vbus_default: usb-vbus-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio62";
-		};
-		pinconf {
-			pins = "gpio62";
-			bias-pull-up;
-		};
-	};
-};
-
 &spmi_bus {
 	pm8916@0 {
 		pon@800 {
@@ -258,3 +233,20 @@
 		regulator-max-microvolt = <2700000>;
 	};
 };
+
+&msmgpio {
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_vbus_default: usb-vbus-default {
+		pins = "gpio62";
+		function = "gpio";
+
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index e9c00367f7fd..4dc437f13fa5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -6,74 +6,49 @@
 &msmgpio {
 
 	blsp1_uart1_default: blsp1-uart1-default {
-		pinmux {
-			function = "blsp_uart1";
-			//	TX, RX, CTS_N, RTS_N
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		//	TX, RX, CTS_N, RTS_N
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	blsp1_uart1_sleep: blsp1-uart1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	blsp1_uart2_default: blsp1-uart2-default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio4", "gpio5";
+		function = "blsp_uart2";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	blsp1_uart2_sleep: blsp1-uart2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio4", "gpio5";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi1_default: spi1-default {
-		pinmux {
-			function = "blsp_spi1";
-			pins = "gpio0", "gpio1", "gpio3";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio2";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1", "gpio3";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio0", "gpio1", "gpio3";
+		function = "blsp_spi1";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio2";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -81,33 +56,24 @@
 	};
 
 	spi1_sleep: spi1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio0", "gpio1", "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1", "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi2_default: spi2-default {
-		pinmux {
-			function = "blsp_spi2";
-			pins = "gpio4", "gpio5", "gpio7";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio6";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5", "gpio7";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio4", "gpio5", "gpio7";
+		function = "blsp_spi2";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio6";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -115,33 +81,24 @@
 	};
 
 	spi2_sleep: spi2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi3_default: spi3-default {
-		pinmux {
-			function = "blsp_spi3";
-			pins = "gpio8", "gpio9", "gpio11";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio10";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9", "gpio11";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio8", "gpio9", "gpio11";
+		function = "blsp_spi3";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio10";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -149,33 +106,24 @@
 	};
 
 	spi3_sleep: spi3-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio8", "gpio9", "gpio10", "gpio11";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi4_default: spi4-default {
-		pinmux {
-			function = "blsp_spi4";
-			pins = "gpio12", "gpio13", "gpio15";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio14";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio12", "gpio13", "gpio15";
+		function = "blsp_spi4";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio14";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -183,33 +131,24 @@
 	};
 
 	spi4_sleep: spi4-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi5_default: spi5-default {
-		pinmux {
-			function = "blsp_spi5";
-			pins = "gpio16", "gpio17", "gpio19";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio18";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17", "gpio19";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio16", "gpio17", "gpio19";
+		function = "blsp_spi5";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio18";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -217,33 +156,24 @@
 	};
 
 	spi5_sleep: spi5-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio16", "gpio17", "gpio18", "gpio19";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi6_default: spi6-default {
-		pinmux {
-			function = "blsp_spi6";
-			pins = "gpio20", "gpio21", "gpio23";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio22";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21", "gpio23";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio20", "gpio21", "gpio23";
+		function = "blsp_spi6";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio22";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -251,466 +181,315 @@
 	};
 
 	spi6_sleep: spi6-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio20", "gpio21", "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	i2c1_default: i2c1-default {
-		pinmux {
-			function = "blsp_i2c1";
-			pins = "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio2", "gpio3";
+		function = "blsp_i2c1";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c1_sleep: i2c1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c2_default: i2c2-default {
-		pinmux {
-			function = "blsp_i2c2";
-			pins = "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio6", "gpio7";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio6", "gpio7";
+		function = "blsp_i2c2";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c2_sleep: i2c2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio6", "gpio7";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio6", "gpio7";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c4_default: i2c4-default {
-		pinmux {
-			function = "blsp_i2c4";
-			pins = "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio14", "gpio15";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio14", "gpio15";
+		function = "blsp_i2c4";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c4_sleep: i2c4-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio14", "gpio15";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio14", "gpio15";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c5_default: i2c5-default {
-		pinmux {
-			function = "blsp_i2c5";
-			pins = "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio18", "gpio19";
+		function = "blsp_i2c5";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c5_sleep: i2c5-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio18", "gpio19";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c6_default: i2c6-default {
-		pinmux {
-			function = "blsp_i2c6";
-			pins = "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio22", "gpio23";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio22", "gpio23";
+		function = "blsp_i2c6";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c6_sleep: i2c6-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio22", "gpio23";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	pmx-sdc1-clk {
 		sdc1_clk_on: clk-on {
-			pinmux {
-				pins = "sdc1_clk";
-			};
-			pinconf {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			pins = "sdc1_clk";
+
+			bias-disable;
+			drive-strength = <16>;
 		};
 		sdc1_clk_off: clk-off {
-			pinmux {
-				pins = "sdc1_clk";
-			};
-			pinconf {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_clk";
+
+			bias-disable;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc1-cmd {
 		sdc1_cmd_on: cmd-on {
-			pinmux {
-				pins = "sdc1_cmd";
-			};
-			pinconf {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc1_cmd";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc1_cmd_off: cmd-off {
-			pinmux {
-				pins = "sdc1_cmd";
-			};
-			pinconf {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_cmd";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc1-data {
 		sdc1_data_on: data-on {
-			pinmux {
-				pins = "sdc1_data";
-			};
-			pinconf {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc1_data";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc1_data_off: data-off {
-			pinmux {
-				pins = "sdc1_data";
-			};
-			pinconf {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_data";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-clk {
 		sdc2_clk_on: clk-on {
-			pinmux {
-				pins = "sdc2_clk";
-			};
-			pinconf {
-				pins = "sdc2_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			pins = "sdc2_clk";
+
+			bias-disable;
+			drive-strength = <16>;
 		};
 		sdc2_clk_off: clk-off {
-			pinmux {
-				pins = "sdc2_clk";
-			};
-			pinconf {
-				pins = "sdc2_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_clk";
+
+			bias-disable;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-cmd {
 		sdc2_cmd_on: cmd-on {
-			pinmux {
-				pins = "sdc2_cmd";
-			};
-			pinconf {
-				pins = "sdc2_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc2_cmd";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc2_cmd_off: cmd-off {
-			pinmux {
-				pins = "sdc2_cmd";
-			};
-			pinconf {
-				pins = "sdc2_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_cmd";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-data {
 		sdc2_data_on: data-on {
-			pinmux {
-				pins = "sdc2_data";
-			};
-			pinconf {
-				pins = "sdc2_data";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc2_data";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc2_data_off: data-off {
-			pinmux {
-				pins = "sdc2_data";
-			};
-			pinconf {
-				pins = "sdc2_data";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_data";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-cd-pin {
 		sdc2_cd_on: cd-on {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			pins = "gpio38";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
 		};
 		sdc2_cd_off: cd-off {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio38";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	cdc-pdm-lines {
 		cdc_pdm_lines_act: pdm-lines-on {
-			pinmux {
-				function = "cdc_pdm0";
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-			};
-			pinconf {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio63", "gpio64", "gpio65", "gpio66",
+			       "gpio67", "gpio68";
+			function = "cdc_pdm0";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		cdc_pdm_lines_sus: pdm-lines-off {
-			pinmux {
-				function = "cdc_pdm0";
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-			};
-			pinconf {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio63", "gpio64", "gpio65", "gpio66",
+			       "gpio67", "gpio68";
+			function = "cdc_pdm0";
+
+			drive-strength = <2>;
+			bias-pull-down;
 		};
 	};
 
 	ext-pri-tlmm-lines {
 		ext_pri_tlmm_lines_act: ext-pa-on {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-			};
-			pinconf {
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
-		};
+			pins = "gpio113", "gpio114", "gpio115", "gpio116";
+			function = "pri_mi2s";
 
+			drive-strength = <8>;
+			bias-disable;
+		};
 		ext_pri_tlmm_lines_sus: ext-pa-off {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-			};
-			pinconf {
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio113", "gpio114", "gpio115", "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	ext-pri-ws-line {
 		ext_pri_ws_act: ext-pa-on {
-			pinmux {
-				function = "pri_mi2s_ws";
-				pins = "gpio110";
-			};
-			pinconf {
-				pins = "gpio110";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
-		};
+			pins = "gpio110";
+			function = "pri_mi2s_ws";
 
+			drive-strength = <8>;
+			bias-disable;
+		};
 		ext_pri_ws_sus: ext-pa-off {
-			pinmux {
-				function = "pri_mi2s_ws";
-				pins = "gpio110";
-			};
-			pinconf {
-				pins = "gpio110";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio110";
+			function = "pri_mi2s_ws";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	ext-mclk-tlmm-lines {
 		ext_mclk_tlmm_lines_act: mclk-lines-on {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio116";
-			};
-			pinconf {
-				pins = "gpio116";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		ext_mclk_tlmm_lines_sus: mclk-lines-off {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio116";
-			};
-			pinconf {
-				pins = "gpio116";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	/* secondary Mi2S */
 	ext-sec-tlmm-lines {
 		ext_sec_tlmm_lines_act: tlmm-lines-on {
-			pinmux {
-				function = "sec_mi2s";
-				pins = "gpio112", "gpio117", "gpio118",
-				       "gpio119";
-			};
-			pinconf {
-				pins = "gpio112", "gpio117", "gpio118",
-					"gpio119";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio112", "gpio117", "gpio118", "gpio119";
+			function = "sec_mi2s";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		ext_sec_tlmm_lines_sus: tlmm-lines-off {
-			pinmux {
-				function = "sec_mi2s";
-				pins = "gpio112", "gpio117", "gpio118",
-				       "gpio119";
-			};
-			pinconf {
-				pins = "gpio112", "gpio117", "gpio118",
-					"gpio119";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio112", "gpio117", "gpio118", "gpio119";
+			function = "sec_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	cdc-dmic-lines {
 		cdc_dmic_lines_act: dmic-lines-on {
-			pinmux-dmic0-clk {
-				function = "dmic0_clk";
+			clk {
 				pins = "gpio0";
+				function = "dmic0_clk";
+
+				drive-strength = <8>;
 			};
-			pinmux-dmic0-data {
-				function = "dmic0_data";
+			data {
 				pins = "gpio1";
-			};
-			pinconf {
-				pins = "gpio0", "gpio1";
+				function = "dmic0_data";
+
 				drive-strength = <8>;
 			};
 		};
 		cdc_dmic_lines_sus: dmic-lines-off {
-			pinmux-dmic0-clk {
-				function = "dmic0_clk";
+			clk {
 				pins = "gpio0";
+				function = "dmic0_clk";
+
+				drive-strength = <2>;
+				bias-disable;
 			};
-			pinmux-dmic0-data {
-				function = "dmic0_data";
+			data {
 				pins = "gpio1";
-			};
-			pinconf {
-				pins = "gpio0", "gpio1";
+				function = "dmic0_data";
+
 				drive-strength = <2>;
 				bias-disable;
 			};
@@ -718,88 +497,64 @@
 	};
 
 	wcnss_pin_a: wcnss-active {
-		pinmux {
-			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "wcss_wlan";
-		};
-		pinconf {
-			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
+		pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+		function = "wcss_wlan";
+
+		drive-strength = <6>;
+		bias-pull-up;
 	};
 
 	cci0_default: cci0-default {
-		pinmux {
-			function = "cci_i2c";
-			pins = "gpio29", "gpio30";
-		};
-		pinconf {
-			pins = "gpio29", "gpio30";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio29", "gpio30";
+		function = "cci_i2c";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	camera_front_default: camera-front-default {
-		pinmux-pwdn {
-			function = "gpio";
-			pins = "gpio33";
-		};
-		pinconf-pwdn {
+		pwdn {
 			pins = "gpio33";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-rst {
-			function = "gpio";
-			pins = "gpio28";
-		};
-		pinconf-rst {
+		rst {
 			pins = "gpio28";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-mclk1 {
-			function = "cam_mclk1";
-			pins = "gpio27";
-		};
-		pinconf-mclk1 {
+		mclk1 {
 			pins = "gpio27";
+			function = "cam_mclk1";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
 	};
 
 	camera_rear_default: camera-rear-default {
-		pinmux-pwdn {
-			function = "gpio";
-			pins = "gpio34";
-		};
-		pinconf-pwdn {
+		pwdn {
 			pins = "gpio34";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-rst {
-			function = "gpio";
-			pins = "gpio35";
-		};
-		pinconf-rst {
+		rst {
 			pins = "gpio35";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-mclk0 {
-			function = "cam_mclk0";
-			pins = "gpio26";
-		};
-		pinconf-mclk0 {
+		mclk0 {
 			pins = "gpio26";
+			function = "cam_mclk0";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index ea52adf07a4b..a0c00d9d62c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -167,77 +167,33 @@
 	};
 };
 
-&msmgpio {
-	gpio_keys_default: gpio-keys-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107", "gpio109";
-		};
-		pinconf {
-			pins = "gpio107", "gpio109";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
+&blsp_i2c2 {
+	status = "okay";
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio52";
-		};
-		pinconf {
-			pins = "gpio52";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
+	accelerometer: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 
-	muic_int_default: muic-int-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio12";
-		};
-		pinconf {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
 	};
 
-	tsp_en_default: tsp-en-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio73";
-		};
-		pinconf {
-			pins = "gpio73";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
 	};
+};
 
-	pmx-mdss {
-		mdss_default: mdss-default {
-			pinmux {
-				function = "gpio";
-				pins = "gpio25";
-			};
-			pinconf {
-				pins = "gpio25";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-
-		mdss_sleep: mdss-sleep {
-			pinmux {
-				function = "gpio";
-				pins = "gpio25";
-			};
-			pinconf {
-				pins = "gpio25";
-				drive-strength = <2>;
-				bias-pull-down;
+&spmi_bus {
+	pm8916@0 {
+		pon@800 {
+			volume-down {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
 			};
 		};
 	};
@@ -356,15 +312,61 @@
 	};
 };
 
-&spmi_bus {
-	pm8916@0 {
-		pon@800 {
-			volume-down {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
+&msmgpio {
+	accel_int_default: accel-int-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss {
+		mdss_default: mdss-default {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-disable;
+		};
+		mdss_sleep: mdss-sleep {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
 		};
 	};
+
+	muic_int_default: muic-int-default {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index b46c87289033..410c7d199f96 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -22,6 +22,12 @@
 	};
 };
 
+&accelerometer {
+	mount-matrix = "0", "1", "0",
+		       "1", "0", "0",
+		       "0", "0", "1";
+};
+
 &dsi0 {
 	panel@0 {
 		reg = <0>;
@@ -51,14 +57,10 @@
 
 &msmgpio {
 	panel_vdd3_default: panel-vdd3-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio9";
-		};
-		pinconf {
-			pins = "gpio9";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio9";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index a555db8f6b34..e39c04d977c2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -9,6 +9,12 @@
 	compatible = "samsung,a5u-eur", "qcom,msm8916";
 };
 
+&accelerometer {
+	mount-matrix = "-1", "0", "0",
+			"0", "1", "0",
+			"0", "0", "1";
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -38,14 +44,10 @@
 
 &msmgpio {
 	ts_int_default: ts-int-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio13";
-		};
-		pinconf {
-			pins = "gpio13";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 32bd140ac9fd..67cae5f9e47e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
@@ -406,11 +407,38 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		restart@4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0x4ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
 		msmgpio: pinctrl@1000000 {
 			compatible = "qcom,msm8916-pinctrl";
 			reg = <0x1000000 0x300000>;
@@ -700,6 +728,9 @@
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x07708000 0x10000>;
 			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
                 lpass_codec: codec{
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -11,6 +11,7 @@
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
 	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0>, <252 0>;
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
@@ -22,15 +23,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -47,4 +39,237 @@
 	};
 };
 
-#include "msm8994-smd-rpm.dtsi"
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* TODO */
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* TODO */
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			/* TODO: value from downstream
+			regulator-min-microvolt = <987500>;
+			fails to apply */
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			/* TODO: Unsupported voltage range.
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			qcom,init-voltage = <2800000>;
+			*/
+		};
+
+		pm8994_l30: l30 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
new file mode 100644
index 000000000000..3cc01f02219d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Microsoft Lumia 950";
+	compatible = "microsoft,talkman", "qcom,msm8992";
+
+	/* Most Lumia 950 users use GRUB to load their kernels,
+	 * hence there is no need for msm-id and friends.
+	 */
+
+	/* This enables graphical output via bootloader-enabled display.
+	 * acpi=no is required due to WP platforms having ACPI support, but
+	 * only for Windows-based OSes.
+	 */
+	chosen {
+		bootargs = "earlycon=efifb console=efifb acpi=no";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs200-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
deleted file mode 100644
index c543c718c22d..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-	blsp1_uart2_default: blsp1_uart2_default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	/* 0-3 for sdc1 4-6 for sdc2 */
-	/* Order of pins */
-	/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
-	/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
-	sdc1_clk_on: clk-on {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <16>; /* 16mA */
-		};
-	};
-
-	sdc1_clk_off: clk-off {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_cmd_on: cmd-on {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-	};
-
-	sdc1_cmd_off: cmd-off {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up = <0x3>; /* same as 3.10 ?? */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_data_on: data-on {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <8>; /* 8mA */
-		};
-	};
-
-	sdc1_data_off: data-off {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_rclk_on: rclk-on {
-		bias-pull-down; /* pull down */
-	};
-
-	sdc1_rclk_off: rclk-off {
-		bias-pull-down; /* pull down */
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 000000000000..4f64ca3ea1ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0 252 0>;
+	qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3404000 {
+			status= "okay";
+			compatible = "simple-framebuffer";
+			reg = <0 0x3404000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xdfc00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp_i2c7 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp_i2c13 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s2: s2 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 2021795c99ad..188fff2095f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -6,10 +6,6 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 
 / {
-	model = "Qualcomm Technologies, Inc. MSM 8992";
-	compatible = "qcom,msm8992";
-	// msm-id needed by bootloader for selecting correct blob
-	qcom,msm-id = <251 0>, <252 0>;
 	interrupt-parent = <&intc>;
 
 	#address-cells = <2>;
@@ -20,55 +16,139 @@
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-			};
-		};
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 			};
 		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+			};
+		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
 	};
 
-	xo_board: xo_board {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
 	};
 
-	sleep_clk: sleep_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		status = "okay";
-		regulator-name = "vph-pwr";
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
 
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		regulator-always-on;
+		smem_region: smem@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
 	};
 
 	sfpb_mutex: hwmutex {
@@ -98,9 +178,10 @@
 				<0xf9002000 0x1000>;
 		};
 
-		apcs: syscon@f900d000 {
-			compatible = "syscon";
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
 			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
 		};
 
 		timer@f9020000 {
@@ -161,63 +242,147 @@
 			};
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
+		sdhc_1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8994-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				<&gcc GCC_SDCC1_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
+					&sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
+					&sdc1_rclk_off>;
+
+			regulator-always-on;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
 		};
 
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
-			status = "disabled";
 			clock-names = "core", "iface";
-			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
-				<&clock_gcc GCC_BLSP1_AHB_CLK>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
 		};
 
-		clock_gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8994";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x2000>;
+		blsp_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
-		sdhci1: mmc@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+		/* Somebody was very creative with their numbering scheme downstream... */
 
-			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
-					<GIC_SPI 138 IRQ_TYPE_NONE>;
-			interrupt-names = "hc_irq", "pwr_irq";
+		blsp_i2c13: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9927000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c13_default>;
+			pinctrl-1 = <&i2c13_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
-				<&clock_gcc GCC_SDCC1_AHB_CLK>;
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
 			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
+		};
 
+		blsp_i2c7: i2c@f9963000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9963000 0x500>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
-					&sdc1_rclk_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
-					&sdc1_rclk_off>;
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			regulator-always-on;
-			bus-width = <8>;
-			mmc-hs400-1_8v;
-			status = "okay";
+		blsp_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <100000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
 		};
 
 		rpm_msg_ram: memory@fc428000 {
@@ -225,27 +390,189 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4c0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		sfpb_mutex_regs: syscon@fd484000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "syscon";
 			reg = <0xfd484000 0x400>;
 		};
-	};
 
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>; // bootloader will update
-	};
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+			blsp1_uart2_default: blsp1-uart2-default {
+				function = "blsp_uart2";
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
 
-		smem_region: smem@6a00000 {
-			reg = <0x0 0x6a00000 0x0 0x200000>;
-			no-map;
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				function = "gpio";
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default {
+				function = "blsp_uart8";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep {
+				function = "gpio";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <6>;
+			};
+
+			sdc1_clk_off: clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_cmd_off: cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_data_off: data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			i2c2_default: i2c2-default {
+				function = "blsp_i2c2";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				function = "gpio";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_default: i2c5-default {
+				/* Don't be fooled! Nobody knows the reason why though... */
+				function = "blsp_i2c11";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				function = "gpio";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default {
+				function = "blsp_i2c6";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				function = "gpio";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_default: i2c7-default {
+				function = "blsp_i2c7";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				function = "gpio";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_default: i2c13-default {
+				/* Not a typo either. */
+				function = "blsp_i2c5";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_sleep: i2c13-sleep {
+				function = "gpio";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 	};
 
@@ -258,58 +585,35 @@
 			qcom,local-pid = <0>;
 			qcom,remote-pid = <6>;
 
-			rpm-requests {
+			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8994";
 				qcom,smd-channels = "rpm_requests";
 
-				pm8994-regulators {
-					compatible = "qcom,rpm-pm8994-regulators";
-
-					pm8994_s1: s1 {};
-					pm8994_s2: s2 {};
-					pm8994_s3: s3 {};
-					pm8994_s4: s4 {};
-					pm8994_s5: s5 {};
-					pm8994_s6: s6 {};
-					pm8994_s7: s7 {};
-
-					pm8994_l1: l1 {};
-					pm8994_l2: l2 {};
-					pm8994_l3: l3 {};
-					pm8994_l4: l4 {};
-					pm8994_l6: l6 {};
-					pm8994_l8: l8 {};
-					pm8994_l9: l9 {};
-					pm8994_l10: l10 {};
-					pm8994_l11: l11 {};
-					pm8994_l12: l12 {};
-					pm8994_l13: l13 {};
-					pm8994_l14: l14 {};
-					pm8994_l15: l15 {};
-					pm8994_l16: l16 {};
-					pm8994_l17: l17 {};
-					pm8994_l18: l18 {};
-					pm8994_l19: l19 {};
-					pm8994_l20: l20 {};
-					pm8994_l21: l21 {};
-					pm8994_l22: l22 {};
-					pm8994_l23: l23 {};
-					pm8994_l24: l24 {};
-					pm8994_l25: l25 {};
-					pm8994_l26: l26 {};
-					pm8994_l27: l27 {};
-					pm8994_l28: l28 {};
-					pm8994_l29: l29 {};
-					pm8994_l30: l30 {};
-					pm8994_l31: l31 {};
-					pm8994_l32: l32 {};
-
-					pm8994_lvs1: lvs1 {};
-					pm8994_lvs2: lvs2 {};
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8992";
+					#clock-cells = <1>;
 				};
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
-#include "msm8992-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index a5f9a6ab512c..baa55643b40f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -11,6 +11,8 @@
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";
 	/* required for bootloader to select correct board */
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 	qcom,board-id = <8026 0>;
 
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
deleted file mode 100644
index 2e118d967f53..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-	blsp1_uart2_default: blsp1_uart2_default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
-	rpm {
-		rpm_requests {
-			pm8994-regulators {
-
-				vdd_l1-supply = <&pm8994_s1>;
-				vdd_l2_26_28-supply = <&pm8994_s3>;
-				vdd_l3_11-supply = <&pm8994_s3>;
-				vdd_l4_27_31-supply = <&pm8994_s3>;
-				vdd_l5_7-supply = <&pm8994_s3>;
-				vdd_l6_12_32-supply = <&pm8994_s5>;
-				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
-				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
-				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
-				vdd_l14_15-supply = <&pm8994_s5>;
-				vdd_l17_29-supply = <&vreg_vph_pwr>;
-				vdd_l20_21-supply = <&vreg_vph_pwr>;
-				vdd_l25-supply = <&pm8994_s5>;
-				vdd_lvs1_2 = <&pm8994_s4>;
-
-				s1 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				s2 {
-					/* TODO */
-				};
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-set-load;
-					regulator-system-load = <325000>;
-				};
-
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				l5 {
-					/* TODO */
-				};
-
-				l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l7 {
-					/* TODO */
-				};
-
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l11 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					proxy-supply = <&pm8994_l12>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					qcom,init-voltage = <2950000>;
-					status = "okay";
-				};
-
-				l14 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-					proxy-supply = <&pm8994_l14>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l17 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l18 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					qcom,init-voltage = <3000000>;
-					qcom,init-ldo-mode = <1>;
-				};
-
-				l19 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-set-load;
-					regulator-system-load = <570000>;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l22 {
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					qcom,init-voltage = <3100000>;
-				};
-
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-				};
-
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3150000>;
-					qcom,init-voltage = <3075000>;
-				};
-
-				l25 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l26 {
-					/* TODO: value from downstream
-					regulator-min-microvolt = <987500>;
-					fails to apply */
-				};
-
-				l27 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					qcom,init-voltage = <1050000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					qcom,init-voltage = <1000000>;
-					proxy-supply = <&pm8994_l28>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-				};
-
-				l29 {
-					/* TODO: Unsupported voltage range.
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-					*/
-				};
-
-				l30 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-
-				l31 {
-					regulator-min-microvolt = <1262500>;
-					regulator-max-microvolt = <1262500>;
-					qcom,init-voltage = <1262500>;
-				};
-
-				l32 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000000..5d6bbbf6c119
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5";
+	compatible = "sony,sumire-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 000000000000..4032b7478f04
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0xcf 0x20001>;
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x1fe00000 0x0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0x00 0x40000000 0x00 0x1000000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_spi0 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	/* Empty but active */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994_regulators: pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {};
+		pm8994_s2: s2 {};
+		pm8994_s3: s3 {};
+		pm8994_s4: s4 {};
+		pm8994_s5: s5 {};
+		pm8994_s6: s6 {};
+		pm8994_s7: s7 {};
+
+		pm8994_l1: l1 {};
+		pm8994_l2: l2 {};
+		pm8994_l3: l3 {};
+		pm8994_l4: l4 {};
+		pm8994_l6: l6 {};
+		pm8994_l8: l8 {};
+		pm8994_l9: l9 {};
+		pm8994_l10: l10 {};
+		pm8994_l11: l11 {};
+		pm8994_l12: l12 {};
+		pm8994_l13: l13 {};
+		pm8994_l14: l14 {};
+		pm8994_l15: l15 {};
+		pm8994_l16: l16 {};
+		pm8994_l17: l17 {};
+		pm8994_l18: l18 {};
+		pm8994_l19: l19 {};
+		pm8994_l20: l20 {};
+		pm8994_l21: l21 {};
+		pm8994_l22: l22 {};
+		pm8994_l23: l23 {};
+		pm8994_l24: l24 {};
+		pm8994_l25: l25 {};
+		pm8994_l26: l26 {};
+		pm8994_l27: l27 {};
+		pm8994_l28: l28 {};
+		pm8994_l29: l29 {};
+		pm8994_l30: l30 {};
+		pm8994_l31: l31 {};
+		pm8994_l32: l32 {};
+
+		pm8994_lvs1: lvs1 {};
+		pm8994_lvs2: lvs2 {};
+	};
+
+	pmi8994_regulators: pmi8994-regulators {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		pmi8994_s1: s1 {};
+		pmi8994_s2: s2 {};
+		pmi8994_s3: s3 {};
+		pmi8994_bby: boost-bypass {};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	/* Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index b1c2d7d6a0f2..6707f898607f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -6,12 +6,6 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 
 / {
-	model = "Qualcomm Technologies, Inc. MSM 8994";
-	compatible = "qcom,msm8994";
-	// msm-id and pmic-id are required by bootloader for
-	// proper selection of dt blob
-	qcom,msm-id = <207 0x20000>;
-	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 	interrupt-parent = <&intc>;
 
 	#address-cells = <2>;
@@ -19,35 +13,194 @@
 
 	chosen { };
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	cpus {
-		#address-cells = <1>;
+		#address-cells = <2>;
 		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
 		cpu-map {
 			cluster0 {
 				core0 {
 					cpu = <&CPU0>;
 				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
 			};
 		};
+	};
 
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,local-pid = <0>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8994";
+					#clock-cells = <1>;
+				};
 			};
 		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 2 0xff08>,
-			     <1 3 0xff08>,
-			     <1 4 0xff08>,
-			     <1 1 0xff08>;
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&tcsr_mutex 3>;
 	};
 
 	soc: soc {
@@ -62,7 +215,13 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			reg = <0xf9000000 0x1000>,
-				  <0xf9002000 0x1000>;
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
 		};
 
 		timer@f9020000 {
@@ -123,72 +282,407 @@
 			};
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
+		sdhc1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+			         <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
 		};
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8994-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+		blsp1_dma: dma@f9904000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9904000 0x19000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
 		};
 
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
 			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi0: spi@f9923000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
-				 <&clock_gcc GCC_BLSP1_AHB_CLK>;
+			spi-max-frequency = <19200000>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			pinctrl-1 = <&blsp1_spi0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
+		blsp_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C3 doesn't exist */
+
+		blsp_i2c4: i2c@f9926000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9926000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma@f9944000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		/* According to downstream kernels, i2c6
+		 * comes before i2c5 address-wise...
+		 */
+
+		blsp_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+					<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
 		};
 
-		clock_gcc: clock-controller@fc400000 {
+		blsp_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+						<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8994";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x2000>;
 		};
-	};
 
-	memory {
-		device_type = "memory";
-		// We expect the bootloader to fill in the reg
-		reg = <0 0 0 0>;
-	};
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
 
-	xo_board: xo_board {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-	};
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
 
-	sleep_clk: sleep_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
+		spmi_bus: spmi@fc4c0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
 
-		smem_mem: smem_region@6a00000 {
-			reg = <0x0 0x6a00000 0x0 0x200000>;
-			no-map;
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				function = "blsp_uart2";
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				function = "gpio";
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default {
+				function = "blsp_uart8";
+				pins = "gpio45", "gpio46";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep {
+				function = "gpio";
+				pins = "gpio45", "gpio46";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			i2c1_default: i2c1-default {
+				function = "blsp_i2c1";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				function = "gpio";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_default: i2c2-default {
+				function = "blsp_i2c2";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				function = "gpio";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_default: i2c4-default {
+				function = "blsp_i2c4";
+				pins = "gpio19", "gpio20";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep {
+				function = "gpio";
+				pins = "gpio19", "gpio20";
+				drive-strength = <2>;
+				bias-pull-down;
+				input-enable;
+			};
+
+			i2c5_default: i2c5-default {
+				function = "blsp_i2c5";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				function = "gpio";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default {
+				function = "blsp_i2c6";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				function = "gpio";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi0_default: blsp1-spi0-default {
+				default {
+					function = "blsp_spi1";
+					pins = "gpio0", "gpio1", "gpio3";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+				cs {
+					function = "gpio";
+					pins = "gpio8";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi0_sleep: blsp1-spi0-sleep {
+				pins = "gpio0", "gpio1", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_clk_on: clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_cmd_off: cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
 		};
 	};
 
@@ -198,12 +692,22 @@
 		#hwlock-cells = <1>;
 	};
 
-	qcom,smem@6a00000 {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
 	};
-};
 
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
 
-#include "msm8994-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 6ab830d01867..00d84fb21798 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -202,7 +202,7 @@
 			regulator-min-microvolt = <1880000>;
 			regulator-max-microvolt = <1880000>;
 		};
-		vreg_15a_1p8: l15 {
+		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index 407c6a32911c..89492ed5196c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -25,6 +25,11 @@
 	};
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/LENOVO/81F1/qcdsp28998.mbn";
+};
+
 &sdhc2 {
 	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 8a14b2bf7bca..cec42437b302 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -235,7 +235,7 @@
 			regulator-min-microvolt = <1880000>;
 			regulator-max-microvolt = <1880000>;
 		};
-		vreg_15a_1p8: l15 {
+		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000000..ea0e9558d0f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+		};
+
+		pm660_gpios: gpios@c000 {
+			compatible = "qcom,pm660-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660_gpios 0 0 13>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			interrupt-cells =<2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000000..edba6de02084
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_gpios: gpios@c000 {
+			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 000000000000..b126d7e7e4fb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8009_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index c0b197458665..1b6406927509 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -9,6 +9,37 @@
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 
+/ {
+	thermal-zones {
+		pm8150 {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm8150_0: pmic@0 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
@@ -30,6 +61,15 @@
 			};
 		};
 
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm8150_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -38,8 +78,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 40b5d75a4a1d..e112e8876db6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150b {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@2 {
 		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index cf05e0685d10..62139538b7d9 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150l {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@4 {
 		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..d016b12967eb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,17 @@
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index c685a1664810..b654b802e95c 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1097,6 +1097,21 @@
 			status = "disabled";
 		};
 
+		imem@8600000 {
+			compatible = "simple-mfd";
+			reg = <0x08600000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d82d09..d8b550723b32 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -21,6 +21,7 @@
 		bluetooth0 = &bluetooth;
 		hsuart0 = &uart3;
 		serial0 = &uart8;
+		wifi0 = &wifi;
 	};
 
 	chosen {
@@ -287,6 +288,10 @@
 	};
 };
 
+&qfprom {
+	vcc-supply = <&vreg_l11a_1p8>;
+};
+
 &qspi {
 	status = "okay";
 	pinctrl-names = "default";
@@ -312,7 +317,7 @@
 &remoteproc_mpss {
 	status = "okay";
 	compatible = "qcom,sc7180-mss-pil";
-	iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>;
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
 	memory-region = <&mba_mem &mpss_mem>;
 };
 
@@ -389,6 +394,18 @@
 	};
 };
 
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 31b9217bb5bf..d46b3833e52f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -130,6 +131,9 @@
 					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -153,6 +157,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
@@ -172,6 +179,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
@@ -191,6 +201,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
@@ -210,6 +223,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_400: l2-cache {
@@ -229,6 +245,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_500: l2-cache {
@@ -248,6 +267,9 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
@@ -267,6 +289,9 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_700: l2-cache {
@@ -366,6 +391,141 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp3: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu6_opp_table: cpu6_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp5: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp8: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp10: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp11: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp12: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp13: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp14: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp15: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -498,9 +658,15 @@
 			#power-domain-cells = <1>;
 		};
 
-		qfprom@784000 {
+		qfprom: efuse@784000 {
 			compatible = "qcom,qfprom";
-			reg = <0 0x00784000 0 0x8ff>;
+			reg = <0 0x00784000 0 0x8ff>,
+			      <0 0x00780000 0 0x7a0>,
+			      <0 0x00782000 0 0x100>,
+			      <0 0x00786000 0 0x1fff>;
+
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -524,6 +690,8 @@
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 					<&gcc GCC_SDCC1_AHB_CLK>;
 			clock-names = "core", "iface";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 
 			bus-width = <8>;
 			non-removable;
@@ -535,6 +703,39 @@
 			mmc-hs400-enhanced-strobe;
 
 			status = "disabled";
+
+			sdhc1_opp_table: sdhc1-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qup_opp_table: qup-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-128000000 {
+				opp-hz = /bits/ 64 <128000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -547,6 +748,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -559,6 +762,11 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -572,6 +780,11 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -583,6 +796,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -596,6 +814,11 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -609,6 +832,11 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -620,6 +848,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -633,6 +866,11 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -644,6 +882,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -657,6 +900,11 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -670,6 +918,11 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -681,6 +934,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -694,6 +952,11 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -705,6 +968,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -718,6 +986,11 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -731,6 +1004,11 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -742,6 +1020,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -756,6 +1039,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c6: i2c@a80000 {
@@ -768,6 +1053,11 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -781,6 +1071,11 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -792,6 +1087,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -805,6 +1105,11 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -816,6 +1121,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -829,6 +1139,11 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -842,6 +1157,11 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -853,6 +1173,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart8_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -866,6 +1191,11 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -877,6 +1207,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -890,6 +1225,11 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -903,6 +1243,11 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -914,6 +1259,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart10_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -927,6 +1277,11 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -940,6 +1295,11 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -951,6 +1311,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart11_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1459,6 +1824,57 @@
 			};
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7180-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_NAV_AXI_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "nav", "snoc_axi",
+				      "mnoc_axi", "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
+					<&rpmhpd SC7180_MSS>;
+			power-domain-names = "load_state", "cx", "mx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-618.0", "qcom,adreno";
 			#stream-id-cells = <16>;
@@ -1470,42 +1886,52 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-267000000 {
 					opp-hz = /bits/ 64 <267000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-180000000 {
 					opp-hz = /bits/ 64 <180000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
 				};
 			};
 		};
@@ -1711,6 +2137,7 @@
 		etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1783,6 +2210,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
 
 			out-ports {
 				port {
@@ -1810,6 +2238,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1829,6 +2258,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1848,6 +2278,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1867,6 +2298,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1886,6 +2318,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1905,6 +2338,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1924,6 +2358,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1943,6 +2378,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2054,57 +2490,6 @@
 			};
 		};
 
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sc7180-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_NAV_AXI_CLK>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "bus", "nav", "snoc_axi",
-				      "mnoc_axi", "xo";
-
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
-					<&rpmhpd SC7180_MX>,
-					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
-
-			memory-region = <&mpss_mem>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
-				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
-			reset-names = "mss_restart", "pdc_reset";
-
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
-			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-				label = "modem";
-				qcom,remote-pid = <1>;
-				mboxes = <&apss_shared 12>;
-			};
-		};
-
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -2117,10 +2502,45 @@
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 					<&gcc GCC_SDCC2_AHB_CLK>;
 			clock-names = "core", "iface";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
 
 			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qspi: spi@88dc000 {
@@ -2132,6 +2552,11 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC
+					&config_noc SLAVE_QSPI_0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
@@ -2257,6 +2682,7 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
 			};
 		};
 
@@ -2355,6 +2781,8 @@
 						       <19200000>,
 						       <19200000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -2372,6 +2800,31 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 			};
 
 			dsi0: dsi@ae94000 {
@@ -2395,6 +2848,9 @@
 					      "iface",
 					      "bus";
 
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
 				phys = <&dsi_phy>;
 				phy-names = "dsi";
 
@@ -2420,6 +2876,25 @@
 						};
 					};
 				};
+
+				dsi_opp_table: dsi-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
 			};
 
 			dsi_phy: dsi-phy@ae94400 {
@@ -2814,6 +3289,29 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
new file mode 100644
index 000000000000..46a7f2b26e6b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+	model = "Sony Xperia 10";
+	compatible = "sony,kirin-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
new file mode 100644
index 000000000000..cf2e8b5d60e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Ganges is very similar to Nile, but
+ * there are some differences that will need
+ * to be addresed when more peripherals are
+ * enabled upstream. Hence the separate DTSI.
+ */
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+			height = <2520>;
+		};
+	};
+
+	/* Yes, this is intentional.
+	 * Ganges devices only use gpio-keys for
+	 * Volume Down, but currently there's an
+	 * issue with it that has to be resolved.
+	 * Until then, let's not make the kernel panic
+	 */
+	/delete-node/ gpio-keys;
+
+	soc {
+
+		i2c@c175000 {
+			status = "okay";
+
+			/* Novatek touchscreen */
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000000..8fca0b69fa01
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Ultra";
+	compatible = "sony,discovery-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000000..90dcd4ebaaed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000000..fae5f1bb6834
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Plus";
+	compatible = "sony,voyager-row", "qcom,sdm630";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+			height = <2160>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000000..9ba359c848d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status= "okay";
+		};
+	};
+
+	gpio_keys {
+		status = "okay";
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		camera_snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		vol_down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug_region@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		removed_region@85800000 {
+			reg = <0x00 0x85800000 0x00 0x3700000>;
+			no-map;
+		};
+	};
+
+	soc {
+		sdhci@c0c4000 {
+			status = "okay";
+
+			mmc-ddr-1_8v;
+			/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+			mmc-hs400-1_8v;
+		};
+
+		i2c@c175000 {
+			status = "okay";
+
+			/* Synaptics touchscreen */
+		};
+
+		i2c@c176000 {
+			status = "okay";
+
+			/* SMB1351 charger */
+		};
+
+		serial@c1af000 {
+			status = "okay";
+		};
+
+		/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+		i2c@c1b6000 {
+			status = "okay";
+
+			/* NXP NFC */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000000..88efe8200c80
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,1174 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <200>;
+			};
+
+			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <154>;
+				exit-latency-us = <87>;
+				min-residency-us = <200>;
+			};
+
+			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <262>;
+				exit-latency-us = <301>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <284>;
+				exit-latency-us = <384>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <272>;
+				exit-latency-us = <329>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <332>;
+				exit-latency-us = <368>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <545>;
+				exit-latency-us = <1609>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_msa_guard: wlan-msa-guard@85600000 {
+			reg = <0x0 0x85600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa-mem@85700000 {
+			reg = <0x0 0x85700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qhee_code: qhee-code@85800000 {
+			reg = <0x0 0x85800000 0x0 0x3700000>;
+			no-map;
+		};
+
+		smem_region: smem-mem@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3300000>;
+			no-map;
+		};
+
+		modem_fw_mem: modem-fw-region@8ac00000 {
+			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp-fw-region@92a00000 {
+			reg = <0x0 0x92a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_mba_mem: pil-mba-region@94800000 {
+			reg = <0x0 0x94800000 0x0 0x200000>;
+			no-map;
+		};
+
+		buffer_mem: buffer-region@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_fw_mem: venus-fw-region@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+
+		secure_region2: secure-region2@f7c00000 {
+			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@f6000000 {
+			reg = <0x0 0xf6000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: qseecom-ta-region@fec00000 {
+			reg = <0x0 0xfec00000 0x0 0x1000000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom-region@f6800000 {
+			reg = <0x0 0xf6800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		secure_display_memory: secure-region@f5c00000 {
+			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash-region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sdm660";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>,
+					<&sleep_clk>;
+		};
+
+		rpm_msg_ram: memory@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@780000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00780000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00793000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@10ac000 {
+			compatible = "qcom,pshold";
+			reg = <0x010ac000 0x4>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0x01f40000 0x20000>;
+		};
+
+		tlmm: pinctrl@3000000 {
+			compatible = "qcom,sdm630-pinctrl";
+			reg = <0x03000000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+
+			blsp1_uart1_default: blsp1-uart1-default {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_tx_active: blsp2-uart1-tx-active {
+				pins = "gpio16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
+				pins = "gpio16";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
+				pins = "gpio17", "gpio18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
+				pins = "gpio17", "gpio18";
+				drive-strength = <2>;
+				bias-no-pull;
+			};
+
+			blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-no-pull;
+			};
+
+			i2c1_default: i2c1-default {
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c2_default: i2c2-default {
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c3_default: i2c3-default {
+				pins = "gpio10", "gpio11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c3_sleep: i2c3-sleep {
+				pins = "gpio10", "gpio11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c4_default: i2c4-default {
+				pins = "gpio14", "gpio15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep {
+				pins = "gpio14", "gpio15";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c5_default: i2c5-default {
+				pins = "gpio18", "gpio19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				pins = "gpio18", "gpio19";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c6_default: i2c6-default {
+				pins = "gpio22", "gpio23";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				pins = "gpio22", "gpio23";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c7_default: i2c7-default {
+				pins = "gpio26", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				pins = "gpio26", "gpio27";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c8_default: i2c8-default {
+				pins = "gpio30", "gpio31";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c8_sleep: i2c8-sleep {
+				pins = "gpio30", "gpio31";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_clk_on: sdc1-clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: sdc1-clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: sdc1-cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc1_cmd_off: sdc1-cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: sdc1-data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: sdc1-data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: sdc1-rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: sdc1-rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+		};
+
+		kgsl_smmu: iommu@5040000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lpass_smmu: iommu@5100000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg =	<0x0800f000 0x1000>,
+				<0x08400000 0x1000000>,
+				<0x09400000 0x1000000>,
+				<0x0a400000 0x220000>,
+				<0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		sdhc_1: sdhci@c0c4000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c0c4000 0x1000>,
+				<0x0c0c5000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+					<&gcc GCC_SDCC1_AHB_CLK>,
+					<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		blsp1_dma: dma@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart1: serial@c16f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c16f000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+					<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_default>;
+			pinctrl-1 = <&i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1af000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
+				&blsp2_uart1_rfr_active>;
+			pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
+				&blsp2_uart1_rfr_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c7: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c8: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c8_default>;
+			pinctrl-1 = <&i2c8_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,sdm660-apcs-hmss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+						<0 7 0x4>;
+				reg = <0x17921000 0x1000>,
+					<0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,	   /* GICD */
+				  <0x17b00000 0x100000>;	  /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+				 <GIC_PPI 2 0xf08>,
+				 <GIC_PPI 3 0xf08>,
+				 <GIC_PPI 0 0xf08>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
new file mode 100644
index 000000000000..7c0830e6a48c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Mermaid uses sdm636, but it's different ever so slightly
+ * that we can ignore it for the time being. Sony also commonizes
+ * the Ganges platform as a whole in downstream kernels.
+ */
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+	model = "Sony Xperia 10 Plus";
+	compatible = "sony,mermaid-row", "qcom,sdm636";
+
+	qcom,msm-id = <345 0>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 70466cc4b405..64fc1bfd66fa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -634,7 +634,7 @@ ap_ts_i2c: &i2c14 {
 };
 
 &mss_pil {
-	iommus = <&apps_smmu 0x780 0x1>,
+	iommus = <&apps_smmu 0x781 0x0>,
 		 <&apps_smmu 0x724 0x3>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c00797bd3b07..a2a98680ccf5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -74,6 +74,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	lt9611_1v8: lt9611-vdd18-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V8";
@@ -382,6 +393,25 @@
 	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -395,6 +425,48 @@
 	};
 };
 
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+	};
+};
+
 &i2c11 {
 	/* On Low speed expansion */
 	label = "LS-I2C1";
@@ -407,6 +479,14 @@
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
@@ -612,6 +692,21 @@
 		};
 	};
 
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&lt9611_codec 0>;
+		};
+	};
+
 	slim-dai-link {
 		link-name = "SLIM Playback";
 		cpu {
@@ -686,6 +781,21 @@
 		};
 	};
 
+	dsi_sw_sel: dsi-sw-sel {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
 	pcie0_default_state: pcie0-default {
 		clkreq {
 			pins = "gpio36";
@@ -943,6 +1053,14 @@
 	};
 };
 
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
 &qup_uart6_default {
 	pinmux {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31346d2..2884577dcb77 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -198,6 +199,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
@@ -220,6 +224,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
@@ -239,6 +246,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
@@ -258,6 +268,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
@@ -277,6 +290,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
 			L2_400: l2-cache {
@@ -296,6 +312,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
 			L2_500: l2-cache {
@@ -315,6 +334,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
 			L2_600: l2-cache {
@@ -334,6 +356,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
 			L2_700: l2-cache {
@@ -433,6 +458,266 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 7680000>;
+		};
+
+		cpu0_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <1804000 10444800>;
+		};
+
+		cpu0_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp12: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <2188000 15052800>;
+		};
+
+		cpu0_opp13: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 16588800>;
+		};
+
+		cpu0_opp14: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <3072000 18124800>;
+		};
+
+		cpu0_opp15: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 19353600>;
+		};
+
+		cpu0_opp16: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 19353600>;
+		};
+
+		cpu0_opp17: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <4068000 20889600>;
+		};
+
+		cpu0_opp18: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu4_opp_table: cpu4_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 9216000>;
+		};
+
+		cpu4_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <3072000 11980800>;
+		};
+
+		cpu4_opp12: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp13: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp14: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp15: opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp16: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp17: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp18: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <5412000 19353600>;
+		};
+
+		cpu4_opp19: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp20: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp21: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <7216000 19353600>;
+		};
+
+		cpu4_opp22: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp23: opp-2092800000 {
+			opp-hz = /bits/ 64 <2092800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp24: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp25: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp26: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp27: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp28: opp-2476800000 {
+			opp-hz = /bits/ 64 <2476800000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp29: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp30: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp31: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+
+		cpu4_opp32: opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -805,6 +1090,25 @@
 			clock-names = "core";
 		};
 
+		qup_opp_table: qup-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x6000>;
@@ -826,6 +1130,8 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -850,6 +1156,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -863,6 +1171,8 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -887,6 +1197,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -900,6 +1212,8 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -924,6 +1238,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -937,6 +1253,8 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -961,6 +1279,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -974,6 +1294,8 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -998,6 +1320,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1011,6 +1335,8 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1035,6 +1361,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1048,6 +1376,8 @@
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1072,6 +1402,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1085,6 +1417,8 @@
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1109,6 +1443,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -1134,6 +1470,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1158,6 +1496,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart8_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1171,6 +1511,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1195,6 +1537,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1552,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1232,6 +1578,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart10_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1245,6 +1593,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1269,6 +1619,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart11_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1282,6 +1634,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1306,6 +1660,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1319,6 +1675,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1343,6 +1701,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart13_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1356,6 +1716,8 @@
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1380,6 +1742,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>;
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1393,6 +1757,8 @@
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1417,6 +1783,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart15_default>;
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -1692,7 +2060,9 @@
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x2500>;
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
 			phy-names = "ufsphy";
@@ -1712,7 +2082,8 @@
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk";
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
 			clocks =
 				<&gcc GCC_UFS_PHY_AXI_CLK>,
 				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -1721,7 +2092,8 @@
 				<&rpmhcc RPMH_CXO_CLK>,
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 			freq-table-hz =
 				<50000000 200000000>,
 				<0 0>,
@@ -1730,7 +2102,8 @@
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 0>;
+				<0 0>,
+				<0 300000000>;
 
 			status = "disabled";
 		};
@@ -2643,6 +3016,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2662,6 +3036,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2681,6 +3056,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2700,6 +3076,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2719,6 +3096,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2738,6 +3116,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2757,6 +3136,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2776,6 +3156,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2911,8 +3292,58 @@
 				 <&gcc GCC_SDCC2_APPS_CLK>;
 			clock-names = "iface", "core";
 			iommus = <&apps_smmu 0xa0 0xf>;
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
 
 			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-9600000 {
+					opp-hz = /bits/ 64 <9600000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qspi: spi@88df000 {
@@ -2924,6 +3355,8 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
@@ -3296,6 +3729,35 @@
 			#power-domain-cells = <1>;
 		};
 
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-275000000 {
+				opp-hz = /bits/ 64 <275000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-328580000 {
+				opp-hz = /bits/ 64 <328580000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3340,6 +3802,8 @@
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				assigned-clock-rates = <300000000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -3364,6 +3828,30 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-344000000 {
+						opp-hz = /bits/ 64 <344000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
 			};
 
 			dsi0: dsi@ae94000 {
@@ -3386,6 +3874,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
 				phy-names = "dsi";
@@ -3450,6 +3940,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
 				phy-names = "dsi";
@@ -3515,42 +4007,52 @@
 
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-710000000 {
 					opp-hz = /bits/ 64 <710000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-596000000 {
 					opp-hz = /bits/ 64 <596000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-520000000 {
 					opp-hz = /bits/ 64 <520000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-414000000 {
 					opp-hz = /bits/ 64 <414000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
 				};
 
 				opp-342000000 {
 					opp-hz = /bits/ 64 <342000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
 				};
 			};
 		};
@@ -3724,6 +4226,21 @@
 			cell-index = <0>;
 		};
 
+		imem@146bf000 {
+			compatible = "simple-mfd";
+			reg = <0 0x146bf000 0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 8ab16611ebe8..6c6325c3af59 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -408,3 +408,24 @@
 	vdda-pll-supply = <&vreg_l3c_1p2>;
 	vdda-pll-max-microamp = <19000>;
 };
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 141c21dfa68c..b86a7ead3006 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -46,6 +47,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -62,6 +64,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -76,6 +79,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -89,6 +93,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -102,6 +107,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -115,6 +121,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -128,6 +135,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -141,6 +149,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -538,6 +547,141 @@
 			};
 		};
 
+		gpu: gpu@2c00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-640.1",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 675 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-585000000 {
+					opp-hz = /bits/ 64 <585000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-499200000 {
+					opp-hz = /bits/ 64 <499200000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-427000000 {
+					opp-hz = /bits/ 64 <427000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sm8150-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
@@ -621,6 +765,98 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+							"qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8150-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x10>;
+			reg-names = "reg-base", "dp_com";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: lanes@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: dwc3@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -631,6 +867,28 @@
 			#power-domain-cells = <1>;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x0001100>,
@@ -864,4 +1122,784 @@
 			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index cff7a85890ee..6894f8490dae 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -7,6 +7,10 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8250 MTP";
@@ -51,6 +55,11 @@
 	};
 };
 
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
 &apps_rsc {
 	pm8150-rpmh-regulators {
 		compatible = "qcom,pm8150-rpmh-regulators";
@@ -136,13 +145,6 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11a_0p75: ldo11 {
-			regulator-name = "vreg_l11a_0p75";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
 		vreg_l12a_1p8: ldo12 {
 			regulator-name = "vreg_l12a_1p8";
 			regulator-min-microvolt = <1800000>;
@@ -351,10 +353,24 @@
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7050adba7995..377172e8967b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -6,6 +6,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -15,6 +17,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c16;
+		i2c17 = &i2c17;
+		i2c18 = &i2c18;
+		i2c19 = &i2c19;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+		spi16 = &spi16;
+		spi17 = &spi17;
+		spi18 = &spi18;
+		spi19 = &spi19;
+	};
+
 	chosen { };
 
 	clocks {
@@ -144,12 +189,6 @@
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -269,6 +308,78 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -286,27 +397,581 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 133>, <&gcc 134>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			status = "disabled";
 
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart2: serial@a90000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
-				clocks = <&gcc 113>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
@@ -376,13 +1041,229 @@
 			};
 		};
 
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpu: gpu@3d00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-650.2",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x03d00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-670000000 {
+					opp-hz = /bits/ 64 <670000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-587000000 {
+					opp-hz = /bits/ 64 <587000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-525000000 {
+					opp-hz = /bits/ 64 <525000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-490000000 {
+					opp-hz = /bits/ 64 <490000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-441600000 {
+					opp-hz = /bits/ 64 <441600000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-305000000 {
+					opp-hz = /bits/ 64 <305000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x30000>,
+			      <0 0x3de0000 0 0x10000>,
+			      <0 0xb290000 0 0x10000>,
+			      <0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8250-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8250-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8250-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd SM8250_CX>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <5>;
+			};
 		};
 
 		pdc: interrupt-controller@b220000 {
@@ -395,7 +1276,20 @@
 			interrupt-controller;
 		};
 
-		spmi: qcom,spmi@c440000 {
+		aoss_qmp: qmp@c300000 {
+			compatible = "qcom,sm8250-aoss-qmp";
+			reg = <0 0x0c300000 0 0x100000>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x0001100>,
 			      <0x0 0x0c600000 0x0 0x2000000>,
@@ -413,82 +1307,633 @@
 			#interrupt-cells = <4>;
 		};
 
-		apps_rsc: rsc@18200000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x0 0x18200000 0x0 0x10000>,
-				<0x0 0x18210000 0x0 0x10000>,
-				<0x0 0x18220000 0x0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8250-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>,
+			      <0 0x0f500000 0 0x300000>,
+			      <0 0x0f900000 0 0x300000>;
+			reg-names = "west", "south", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 180>;
+			wakeup-parent = <&pdc>;
 
-			rpmhcc: clock-controller {
-				compatible = "qcom,sm8250-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
+			qup_i2c0_default: qup-i2c0-default {
+				mux {
+					pins = "gpio28", "gpio29";
+					function = "qup0";
+				};
+
+				config {
+					pins = "gpio28", "gpio29";
+					drive-strength = <2>;
+					bias-disable;
+				};
 			};
 
-			rpmhpd: power-controller {
-				compatible = "qcom,sm8250-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio4", "gpio5";
+					function = "qup1";
+				};
 
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
+				config {
+					pins = "gpio4", "gpio5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
+			qup_i2c2_default: qup-i2c2-default {
+				mux {
+					pins = "gpio115", "gpio116";
+					function = "qup2";
+				};
 
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
+				config {
+					pins = "gpio115", "gpio116";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
+			qup_i2c3_default: qup-i2c3-default {
+				mux {
+					pins = "gpio119", "gpio120";
+					function = "qup3";
+				};
 
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
+				config {
+					pins = "gpio119", "gpio120";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
+			qup_i2c4_default: qup-i2c4-default {
+				mux {
+					pins = "gpio8", "gpio9";
+					function = "qup4";
+				};
 
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
+				config {
+					pins = "gpio8", "gpio9";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
+			qup_i2c5_default: qup-i2c5-default {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "qup5";
+				};
 
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
+				config {
+					pins = "gpio12", "gpio13";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
+			qup_i2c6_default: qup-i2c6-default {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "qup6";
+				};
 
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
+				config {
+					pins = "gpio16", "gpio17";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "qup7";
+				};
+
+				config {
+					pins = "gpio20", "gpio21";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				mux {
+					pins = "gpio24", "gpio25";
+					function = "qup8";
+				};
+
+				config {
+					pins = "gpio24", "gpio25";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				mux {
+					pins = "gpio125", "gpio126";
+					function = "qup9";
+				};
+
+				config {
+					pins = "gpio125", "gpio126";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				mux {
+					pins = "gpio129", "gpio130";
+					function = "qup10";
+				};
+
+				config {
+					pins = "gpio129", "gpio130";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				mux {
+					pins = "gpio60", "gpio61";
+					function = "qup11";
+				};
+
+				config {
+					pins = "gpio60", "gpio61";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c12_default: qup-i2c12-default {
+				mux {
+					pins = "gpio32", "gpio33";
+					function = "qup12";
+				};
+
+				config {
+					pins = "gpio32", "gpio33";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c13_default: qup-i2c13-default {
+				mux {
+					pins = "gpio36", "gpio37";
+					function = "qup13";
+				};
+
+				config {
+					pins = "gpio36", "gpio37";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c14_default: qup-i2c14-default {
+				mux {
+					pins = "gpio40", "gpio41";
+					function = "qup14";
+				};
+
+				config {
+					pins = "gpio40", "gpio41";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c15_default: qup-i2c15-default {
+				mux {
+					pins = "gpio44", "gpio45";
+					function = "qup15";
+				};
+
+				config {
+					pins = "gpio44", "gpio45";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c16_default: qup-i2c16-default {
+				mux {
+					pins = "gpio48", "gpio49";
+					function = "qup16";
+				};
+
+				config {
+					pins = "gpio48", "gpio49";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c17_default: qup-i2c17-default {
+				mux {
+					pins = "gpio52", "gpio53";
+					function = "qup17";
+				};
+
+				config {
+					pins = "gpio52", "gpio53";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c18_default: qup-i2c18-default {
+				mux {
+					pins = "gpio56", "gpio57";
+					function = "qup18";
+				};
+
+				config {
+					pins = "gpio56", "gpio57";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c19_default: qup-i2c19-default {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "qup19";
+				};
+
+				config {
+					pins = "gpio0", "gpio1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				mux {
+					pins = "gpio28", "gpio29",
+					       "gpio30", "gpio31";
+					function = "qup0";
+				};
+
+				config {
+					pins = "gpio28", "gpio29",
+					       "gpio30", "gpio31";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				mux {
+					pins = "gpio4", "gpio5",
+					       "gpio6", "gpio7";
+					function = "qup1";
+				};
+
+				config {
+					pins = "gpio4", "gpio5",
+					       "gpio6", "gpio7";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi2_default: qup-spi2-default {
+				mux {
+					pins = "gpio115", "gpio116",
+					       "gpio117", "gpio118";
+					function = "qup2";
+				};
+
+				config {
+					pins = "gpio115", "gpio116",
+					       "gpio117", "gpio118";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				mux {
+					pins = "gpio119", "gpio120",
+					       "gpio121", "gpio122";
+					function = "qup3";
+				};
+
+				config {
+					pins = "gpio119", "gpio120",
+					       "gpio121", "gpio122";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi4_default: qup-spi4-default {
+				mux {
+					pins = "gpio8", "gpio9",
+					       "gpio10", "gpio11";
+					function = "qup4";
+				};
+
+				config {
+					pins = "gpio8", "gpio9",
+					       "gpio10", "gpio11";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				mux {
+					pins = "gpio12", "gpio13",
+					       "gpio14", "gpio15";
+					function = "qup5";
+				};
+
+				config {
+					pins = "gpio12", "gpio13",
+					       "gpio14", "gpio15";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				mux {
+					pins = "gpio16", "gpio17",
+					       "gpio18", "gpio19";
+					function = "qup6";
+				};
+
+				config {
+					pins = "gpio16", "gpio17",
+					       "gpio18", "gpio19";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi7_default: qup-spi7-default {
+				mux {
+					pins = "gpio20", "gpio21",
+					       "gpio22", "gpio23";
+					function = "qup7";
+				};
+
+				config {
+					pins = "gpio20", "gpio21",
+					       "gpio22", "gpio23";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				mux {
+					pins = "gpio24", "gpio25",
+					       "gpio26", "gpio27";
+					function = "qup8";
+				};
+
+				config {
+					pins = "gpio24", "gpio25",
+					       "gpio26", "gpio27";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi9_default: qup-spi9-default {
+				mux {
+					pins = "gpio125", "gpio126",
+					       "gpio127", "gpio128";
+					function = "qup9";
+				};
+
+				config {
+					pins = "gpio125", "gpio126",
+					       "gpio127", "gpio128";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				mux {
+					pins = "gpio129", "gpio130",
+					       "gpio131", "gpio132";
+					function = "qup10";
+				};
+
+				config {
+					pins = "gpio129", "gpio130",
+					       "gpio131", "gpio132";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				mux {
+					pins = "gpio60", "gpio61",
+					       "gpio62", "gpio63";
+					function = "qup11";
+				};
+
+				config {
+					pins = "gpio60", "gpio61",
+					       "gpio62", "gpio63";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi12_default: qup-spi12-default {
+				mux {
+					pins = "gpio32", "gpio33",
+					       "gpio34", "gpio35";
+					function = "qup12";
+				};
+
+				config {
+					pins = "gpio32", "gpio33",
+					       "gpio34", "gpio35";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi13_default: qup-spi13-default {
+				mux {
+					pins = "gpio36", "gpio37",
+					       "gpio38", "gpio39";
+					function = "qup13";
+				};
+
+				config {
+					pins = "gpio36", "gpio37",
+					       "gpio38", "gpio39";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi14_default: qup-spi14-default {
+				mux {
+					pins = "gpio40", "gpio41",
+					       "gpio42", "gpio43";
+					function = "qup14";
+				};
+
+				config {
+					pins = "gpio40", "gpio41",
+					       "gpio42", "gpio43";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi15_default: qup-spi15-default {
+				mux {
+					pins = "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "qup15";
+				};
+
+				config {
+					pins = "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi16_default: qup-spi16-default {
+				mux {
+					pins = "gpio48", "gpio49",
+					       "gpio50", "gpio51";
+					function = "qup16";
+				};
+
+				config {
+					pins = "gpio48", "gpio49",
+					       "gpio50", "gpio51";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi17_default: qup-spi17-default {
+				mux {
+					pins = "gpio52", "gpio53",
+					       "gpio54", "gpio55";
+					function = "qup17";
+				};
+
+				config {
+					pins = "gpio52", "gpio53",
+					       "gpio54", "gpio55";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi18_default: qup-spi18-default {
+				mux {
+					pins = "gpio56", "gpio57",
+					       "gpio58", "gpio59";
+					function = "qup18";
+				};
+
+				config {
+					pins = "gpio56", "gpio57",
+					       "gpio58", "gpio59";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi19_default: qup-spi19-default {
+				mux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup19";
+				};
+
+				config {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					drive-strength = <6>;
+					bias-disable;
 				};
 			};
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
-			reg = <0x0 0x01f40000 0x0 0x40000>;
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8250-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
 		};
 
 		timer@17c20000 {
@@ -550,6 +1995,78 @@
 			};
 		};
 
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8250-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d17351cdbce0..d7902294faf3 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,23 +1,55 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
-			       r8a774c0-ek874-idk-2121wr.dtb \
-			       r8a774c0-ek874-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
+
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb
+
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
-dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb
+
 dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
+
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
new file mode 100644
index 000000000000..66c9153b3101
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,758 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	backlight_rgb: backlight-rgb {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm0 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "Switch-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "Switch-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "Switch-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "Switch-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-5 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_5>;
+			label = "Switch-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+			linux,default-trigger = "heartbeat";
+		};
+		led1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	lvds {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd_reset>;
+		width-mm = <223>;
+		height-mm = <125>;
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 800x480@60Hz */
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hsync-len = <48>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <13>;
+			vback-porch = <29>;
+			vsync-len = <3>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	rgb {
+		/* Different LCD with compatible timings */
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_rgb>;
+		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd>;
+		port {
+			rgb_panel: endpoint {
+				remote-endpoint = <&du_out_rgb>;
+			};
+		};
+	};
+
+	reg_audio: regulator_audio {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+
+	reg_cam0: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_cam1: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+		dais = <&rsnd_port0>, <&rsnd_port1>;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-always-on;
+	};
+
+	/* External DU dot clocks */
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <24576000>;
+	assigned-clocks = <&versaclock6_bb 4>;
+	assigned-clock-rates = <24576000>;
+};
+
+&audio_clk_b {
+	clock-frequency = <22579200>;
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 722>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		"dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&du_out_rgb {
+	remote-endpoint = <&rgb_panel>;
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+};
+
+&ehci1 {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dw_hdmi0_in: endpoint {
+				remote-endpoint = <&du_out_hdmi0>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	gpio_exp2: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp3: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp4: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	versaclock6_bb: clock-controller@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+		assigned-clocks = <&versaclock6_bb 1>,
+				   <&versaclock6_bb 2>,
+				   <&versaclock6_bb 3>,
+				   <&versaclock6_bb 4>;
+		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:Default */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:Default */
+			0x0000 /* 5:Default */
+		>;
+		port {
+			wm8962_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	/* 0 - lcd_reset */
+	/* 1 - lcd_pwr */
+	/* 2 - lcd_select */
+	/* 3 - backlight-enable */
+	/* 4 - Touch_shdwn */
+	/* 5 - LCD_H_pol */
+	/* 6 - lcd_V_pol */
+	gpio_exp1: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		wakeup-source;
+	};
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					hd3ss3220_ep: endpoint {
+						remote-endpoint = <&usb3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+		function = "du";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	led_pins: leds {
+		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
+		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+		bias-pull-down;
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	pwm2_pins: pwm2 {
+		groups = "pwm2_a";
+		function = "pwm2_a";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		mux {
+			groups = "usb0";
+			function = "usb0";
+		};
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+	};
+
+	usb30_pins: usb30 {
+		mux {
+			groups = "usb30";
+			function = "usb30";
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&wm8962_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi1 &dvc1 &src1>;
+				capture = <&ssi0>;
+			};
+		};
+		rsnd_port1: port@1 {
+		    reg = <0x01>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&tmu1 {
+	status = "okay";
+};
+
+&tmu2 {
+	status = "okay";
+};
+
+&tmu3 {
+	status = "okay";
+};
+
+&tmu4 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	port {
+		usb3_role_switch: endpoint {
+			remote-endpoint = <&hd3ss3220_ep>;
+		};
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&vin0 {
+	status = "okay";
+};
+&vin1 {
+	status = "okay";
+};
+&vin2 {
+	status = "okay";
+};
+&vin3 {
+	status = "okay";
+};
+&vin4 {
+	status = "okay";
+};
+&vin5 {
+	status = "okay";
+};
+&vin6 {
+	status = "okay";
+};
+&vin7 {
+	status = "okay";
+};
+
+&xhci0
+{
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
new file mode 100644
index 000000000000..97272f5fa0ab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+
+	osc_32k: osc_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: wlan_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb_hub_reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+	max-speed = <4000000>;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+	};
+};
+
+&hscif2 {
+	status = "okay";
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_20_0",
+			"wl_reg_on",
+			"bt_reg_on",
+			"i2c4_20_3",
+			"i2c4_20_4",
+			"bt_dev_wake",
+			"i2c4_20_6",
+			"i2c4_20_7";
+	};
+
+	pca9654_lte: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_21_0",
+			"zoe_pwr_on",
+			"zoe_extint",
+			"zoe_reset_n",
+			"sara_reset",
+			"i2c4_21_5",
+			"sara_pwr_off",
+			"sara_networking_status";
+	};
+
+	eeprom@50 {
+		compatible = "microchip,at24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	versaclock5: versaclock_som@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+		assigned-clocks = <&versaclock5 1>,
+				   <&versaclock5 2>,
+				   <&versaclock5 3>,
+				   <&versaclock5 4>;
+		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a";
+		function = "hscif2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_a";
+		function = "scif5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi2_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&vspb {
+	status = "okay";
+};
+
+&vspi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index aaefc3ae56d5..33daa9570684 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -18,7 +18,6 @@
 	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index bd056904e8bd..2eda9f66ae81 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
  *
  * Copyright (C) 2019 Renesas Electronics Corp.
  */
@@ -32,17 +33,6 @@
 	leds {
 		compatible = "gpio-leds";
 
-		bt_active_led {
-			label = "blue:bt";
-			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "hci0-power";
-			default-state = "off";
-		};
-
-		led0 {
-			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
-		};
-
 		led1 {
 			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -55,11 +45,8 @@
 			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
 		};
 
-		wlan_active_led {
-			label = "yellow:wlan";
-			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -112,17 +99,6 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	wlan_en_reg: regulator-wlan_en {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <70000>;
-
-		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	x302_clk: x302-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -194,11 +170,6 @@
 
 	uart-has-rtscts;
 	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1837-st";
-		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &hsusb {
@@ -210,13 +181,6 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	gpio_expander: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	versaclock5: clock-generator@6a {
 		compatible = "idt,5p49v5923";
 		reg = <0x6a>;
@@ -281,11 +245,6 @@
 		power-source = <1800>;
 	};
 
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a_a";
-		function = "audio_clk";
-	};
-
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -309,28 +268,6 @@
 	};
 };
 
-&rcar_sound {
-	pinctrl-0 = <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rsnd_port: port {
-		rsnd_endpoint: endpoint {
-			remote-endpoint = <&dw_hdmi0_snd_in>;
-
-			dai-format = "i2s";
-			bitclock-master = <&rsnd_endpoint>;
-			frame-master = <&rsnd_endpoint>;
-
-			playback = <&ssi2>;
-		};
-	};
-};
-
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
new file mode 100644
index 000000000000..8e2db1d6ca81
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c4 {
+	gpio_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pfc {
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
new file mode 100644
index 000000000000..3046c07a288b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
new file mode 100644
index 000000000000..40c5e8d6d841
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-gpio {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 28fe17e3bc4e..178401a34cbf 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
  *
  * Copyright (C) 2019 Renesas Electronics Corp.
  */
@@ -13,14 +13,6 @@
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 50000>;
-
-		brightness-levels = <0 2 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &avb {
@@ -51,35 +43,6 @@
 	status = "okay";
 };
 
-&gpio1 {
-	/*
-	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
-	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
-	 */
-	lvds-connector-en-gpio {
-		gpio-hog;
-		gpios = <20 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "lvds-connector-en-gpio";
-	};
-};
-
-&lvds0 {
-	/*
-	 * Please include the LVDS panel .dtsi file and uncomment the below line
-	 * to enable LVDS panel connected to RZ/G2[MN] boards.
-	 */
-
-	/* status = "okay"; */
-
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
 &pciec0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 000000000000..2c5b057c30c6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+	compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
index 2ab5edd84e9b..06c04c59cc78 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -1,52 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M sub board connected to an
- * Advantech IDK-1110WR 10.1" LVDS panel
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
  *
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
 #include "rzg2-advantech-idk-1110wr-panel.dtsi"
 
-/ {
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 50000>;
-
-		brightness-levels = <0 2 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-};
-
-&gpio1 {
-	/*
-	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
-	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
-	 */
-	lvds-connector-en-gpio {
-		gpio-hog;
-		gpios = <20 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "lvds-connector-en-gpio";
-	};
-};
-
 &lvds0 {
 	status = "okay";
 };
-
-&pfc {
-	pwm0_pins: pwm0 {
-		groups = "pwm0";
-		function = "pwm0";
-	};
-};
-
-&pwm0 {
-	pinctrl-0 = <&pwm0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
index c754fca239d9..a5ca86196a7b 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M sub board
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774a1-hihope-rzg2m.dts"
@@ -14,6 +15,7 @@
 		     "renesas,r8a774a1";
 };
 
+/* SW43 should be OFF, if in ON state SATA port will be activated */
 &pciec1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..c0e9d8ca4a8c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
new file mode 100644
index 000000000000..2221cf6aed21
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
new file mode 100644
index 000000000000..bb18f6ee2048
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
index 96f2fb080a1a..25ae255de0f2 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M main board
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 /dts-v1/;
 #include "r8a774a1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev4.dtsi"
 
 / {
 	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index a603d947970e..8e80f50132ad 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774a1-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a774a1";
 	#address-cells = <2>;
@@ -2250,7 +2252,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2262,7 +2264,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2274,7 +2276,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2286,7 +2288,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..4b5154f029a5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
index ab47c0bd9c19..a3edd55113df 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2N sub board
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
+ * sub board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774b1-hihope-rzg2n.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..e730b3b25dbe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
new file mode 100644
index 000000000000..2e5e1de04049
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
new file mode 100644
index 000000000000..c69ca5cf6f77
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
index 9910c1aa0a61..f1883cbd1a82 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2N main board
+ * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 /dts-v1/;
 #include "r8a774b1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev4.dtsi"
 
 / {
 	model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 1e51855c7cd3..49e5addcfd97 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774b1-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a774b1";
 	#address-cells = <2>;
@@ -2108,7 +2110,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2120,7 +2122,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2132,7 +2134,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2144,7 +2146,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 5c72a7efbb03..42171190cce4 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1618,7 +1618,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1630,7 +1630,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1642,7 +1642,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
new file mode 100644
index 000000000000..265355e0de5f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
+		     "renesas,r8a774e1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
new file mode 100644
index 000000000000..cdbe527e9340
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
new file mode 100644
index 000000000000..0f86cfd52425
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -0,0 +1,1664 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774e1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774e1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a774e1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774e1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774e1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774e1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774e1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774e1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774e1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			reg = <0 0xe6590000 0 0x200>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			reg = <0 0xe65ee000 0 0x90>;
+			#phy-cells = <0>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+				 <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+				 <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+				 <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+				 <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+				 <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+				 <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+				 <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+				 <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+				 <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+				 <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+				 <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+				 <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+				 <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+				 <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774e1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774e1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			status = "disabled";
+
+			/* placeholder */
+
+			rcar_sound,ssi {
+				ssi2: ssi-2 {
+					/* placeholder */
+				};
+			};
+		};
+
+		xhci0: usb@ee000000 {
+			reg = <0 0xee000000 0 0xc00>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb3_peri0: usb@ee020000 {
+			reg = <0 0xee020000 0 0x400>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ohci0: usb@ee080000 {
+			reg = <0 0xee080000 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ohci1: usb@ee0a0000 {
+			reg = <0 0xee0a0000 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ehci0: usb@ee080100 {
+			reg = <0 0xee080100 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ehci1: usb@ee0a0100 {
+			reg = <0 0xee0a0100 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			reg = <0 0xee080200 0 0x700>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			reg = <0 0xee0a0200 0 0x700>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		hdmi0: hdmi@fead0000 {
+			reg = <0 0xfead0000 0 0x10000>;
+			status = "disabled";
+
+			/* placeholder */
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			reg = <0 0xfeb00000 0 0x80000>;
+			status = "disabled";
+
+			/* placeholder */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <6313>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 61d67d9714ab..9beb8e76d923 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -2590,7 +2590,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2603,7 +2603,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2616,7 +2616,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2629,7 +2629,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 33bf62acffbb..4dfb7f076787 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2394,7 +2394,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2407,7 +2407,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2420,7 +2420,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2433,7 +2433,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 760e738b75b3..542c44c7dbca 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -883,6 +883,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77961_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77961",
 				     "renesas,etheravb-rcar-gen3";
@@ -1257,7 +1346,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1269,7 +1358,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1281,7 +1370,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -1293,7 +1382,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 6f7ab39fd282..fe4dc12e2bdf 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2120,7 +2120,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2133,7 +2133,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2146,7 +2146,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2159,7 +2159,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index ac2156ab3e62..5c28f303e911 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -187,12 +187,79 @@
 		function = "i2c0";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 01c4ba0f7be1..668a1ece9af0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -212,12 +212,79 @@
 		power-source = <3300>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index bd95ecb1b40d..2b9124a5ca86 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1039,6 +1039,23 @@
 			status = "disabled";
 		};
 
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77970-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index ef8350a062af..422ec53740cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -262,6 +262,11 @@
 		power-source = <1800>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
@@ -273,6 +278,68 @@
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index 6dff04693223..7838dcee3136 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -187,6 +187,11 @@
 		function = "i2c0";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
@@ -198,6 +203,68 @@
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 387e6d99f2f3..59f5bbd72161 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1344,6 +1344,23 @@
 			status = "disabled";
 		};
 
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77980-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index dc24cec46ae1..7402cfa8d4e4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -715,6 +715,7 @@
 	mmc-hs400-1_8v;
 	bus-width = <8>;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index cd11f24744d4..1991bdc36792 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1595,7 +1595,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1608,7 +1608,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1621,7 +1621,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e5617ec0f49c..2c2272f5f5b5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -916,7 +916,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77995",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 98bbcafc8c0d..1bf77957d2c2 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -833,6 +833,7 @@
 	mmc-hs400-1_8v;
 	non-removable;
 	fixed-emmc-driver-type = <1>;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 0a680257d9c2..5fe905fae9a8 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -145,7 +145,6 @@
 };
 
 &emmc {
-	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
@@ -499,7 +498,6 @@
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <800>;
@@ -513,7 +511,6 @@
 };
 
 &sdio {
-	bus-width = <4>;
 	cap-sd-highspeed;
 	keep-power-in-suspend;
 	non-removable;
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index a6b8427156d5..2695ea8cda14 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -714,6 +714,7 @@
 			reg = <0x0 0xff240000 0x0 0x4000>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -733,9 +734,9 @@
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <120000>;
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-0 = <&tsadc_otp_pin>;
 		pinctrl-1 = <&tsadc_otp_out>;
-		pinctrl-2 = <&tsadc_otp_gpio>;
+		pinctrl-2 = <&tsadc_otp_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
@@ -1373,7 +1374,7 @@
 		};
 
 		tsadc {
-			tsadc_otp_gpio: tsadc-otp-gpio {
+			tsadc_otp_pin: tsadc-otp-pin {
 				rockchip,pins =
 					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index ac7f694079d0..e8b754d415d8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -524,6 +524,7 @@
 			reg = <0x0 0xff2c0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -534,6 +535,7 @@
 			reg = <0x0 0xff2d0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -1629,7 +1631,7 @@
 		};
 
 		tsadc {
-			tsadc_otp_gpio: tsadc-otp-gpio {
+			tsadc_otp_pin: tsadc-otp-pin {
 				rockchip,pins =
 					<0 RK_PB2 0 &pcfg_pull_none>;
 			};
@@ -1657,7 +1659,7 @@
 					<2 RK_PA3 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins =
 					<2 RK_PA3 0 &pcfg_pull_none>;
 			};
@@ -1730,7 +1732,7 @@
 					<4 RK_PA7 1 &pcfg_pull_none>;
 			};
 
-			uart4_rts_gpio: uart4-rts-gpio {
+			uart4_rts_pin: uart4-rts-pin {
 				rockchip,pins =
 					<4 RK_PA7 0 &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index b3a8f936578f..35bd6b904b9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -445,7 +445,6 @@
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index ac29c2744d08..1969dab84138 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -41,7 +41,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 34db48c274e5..b70ffb1c6a63 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -34,7 +34,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-boot-on;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 6e09c223ed57..86cfb5c50a94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -25,7 +25,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index d399883d4b75..bbdb19a3e85d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -153,6 +153,7 @@
 			reg = <0x0 0xff1f0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -552,9 +553,9 @@
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
 		clock-names = "tsadc", "apb_pclk";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		rockchip,grf = <&grf>;
@@ -1154,7 +1155,7 @@
 				rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
 						<0 RK_PA6 2 &pcfg_pull_none>;
 			};
-			i2c3_gpio: i2c3-gpio {
+			i2c3_pins: i2c3-pins {
 				rockchip,pins =
 					<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
 					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -1225,7 +1226,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
@@ -1248,7 +1249,7 @@
 				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -1267,7 +1268,7 @@
 				rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
 			};
 
-			uart1_rts_gpio: uart1-rts-gpio {
+			uart1_rts_pin: uart1-rts-pin {
 				rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -1493,7 +1494,7 @@
 				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0m0_gpio: sdmmc0m0-gpio {
+			sdmmc0m0_pin: sdmmc0m0-pin {
 				rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
 			};
 		};
@@ -1503,7 +1504,7 @@
 				rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0m1_gpio: sdmmc0m1-gpio {
+			sdmmc0m1_pin: sdmmc0m1-pin {
 				rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
 			};
 		};
@@ -1536,7 +1537,7 @@
 						<1 RK_PA3 1 &pcfg_pull_up_8ma>;
 			};
 
-			sdmmc0_gpio: sdmmc0-gpio {
+			sdmmc0_pins: sdmmc0-pins {
 				rockchip,pins =
 					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1578,7 +1579,7 @@
 					<3 RK_PA7 3 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0ext_gpio: sdmmc0ext-gpio {
+			sdmmc0ext_pins: sdmmc0ext-pins {
 				rockchip,pins =
 					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1623,7 +1624,7 @@
 						<1 RK_PC1 1 &pcfg_pull_up_8ma>;
 			};
 
-			sdmmc1_gpio: sdmmc1-gpio {
+			sdmmc1_pins: sdmmc1-pins {
 				rockchip,pins =
 					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1817,7 +1818,7 @@
 			tsadc_int: tsadc-int {
 				rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
 			};
-			tsadc_gpio: tsadc-gpio {
+			tsadc_pin: tsadc-pin {
 				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index cbde279ae81d..7fcb1eacea8a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -25,9 +25,9 @@
 	};
 
 	leds {
-		pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
+		pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
 
-		sd-card-led {
+		sd_card_led: led-3 {
 			label = "sd_card_led";
 			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -118,14 +118,14 @@
 	};
 
 	leds {
-		led_sd_haikou: led-sd-gpio {
+		sd_card_led_pin: sd-card-led-pin {
 			rockchip,pins =
 				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	sdmmc {
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins =
 				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index e17311e09082..24d28be4736c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -76,16 +76,16 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_module>;
+		pinctrl-0 = <&module_led_pins>;
 
-		module_led1 {
+		module_led1: led-1 {
 			label = "module_led1";
 			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			panic-indicator;
 		};
 
-		module_led2 {
+		module_led2: led-2 {
 			label = "module_led2";
 			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -156,7 +156,7 @@
 	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
 	tx_delay = <0x10>;
 	rx_delay = <0x10>;
 	status = "okay";
@@ -270,7 +270,7 @@
 
 &pinctrl {
 	leds {
-		led_pins_module: led-module-gpio {
+		module_led_pins: module-led-pins {
 			rockchip,pins =
 				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
 				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 1ebb0eef42da..3746f23dc3df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -149,6 +149,7 @@
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC_PERI>;
 			clock-names = "apb_pclk";
 		};
@@ -160,6 +161,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC_BUS>;
 			clock-names = "apb_pclk";
 		};
@@ -483,9 +485,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1145,7 +1147,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 20b5599f5e78..6db18808b9c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -589,11 +589,11 @@
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 4373ed732af7..60cd1c18cd4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -499,7 +499,7 @@ camera: &i2c7 {
 };
 
 /* there is no external pull up, so need to set this pin pull up */
-&sdmmc_cd_gpio {
+&sdmmc_cd_pin {
 	rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 2f3997740068..32dcaf210085 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -516,7 +516,7 @@ ap_i2c_audio: &i2c8 {
 	 * configured as SDMMC and not JTAG.
 	 */
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
 		     &sdmmc_bus4>;
 
 	bus-width = <4>;
@@ -767,7 +767,7 @@ ap_i2c_audio: &i2c8 {
 		};
 
 		/* This is where we actually hook up CD; has external pull */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index bf87fa32d3b1..341d074ed996 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -205,7 +205,7 @@
 		compatible = "silergy,syr827";
 		reg = <0x40>;
 		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -223,7 +223,7 @@
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -521,12 +521,12 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins =
 				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins =
 				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index e87a04477440..e36837c04dc7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -141,15 +141,15 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
 
-		sys-led {
+		sys_led: led-0 {
 			label = "sys_led";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led {
+		user_led: led-1 {
 			label = "user_led";
 			default-state = "off";
 			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -586,11 +586,11 @@
 	};
 
 	leds {
-		sys_led_gpio: sys_led-gpio {
+		sys_led_pin: sys-led-pin {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led_gpio: user_led-gpio {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 73be38a53796..1fa80ac15464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -341,7 +341,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -360,7 +360,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -447,11 +447,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 1d246c2caa3c..76a8b40a93c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -117,9 +117,9 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&leds_gpio>;
+		pinctrl-0 = <&status_led_pin>;
 
-		status {
+		status_led: led-0 {
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			label = "status_led";
 			linux,default-trigger = "heartbeat";
@@ -520,7 +520,7 @@
 	};
 
 	gpio-leds {
-		leds_gpio: leds-gpio {
+		status_led_pin: status-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index cb0245d2226d..06d48338c836 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -28,12 +28,19 @@
 		pwms = <&pwm0 0 740740 0>;
 	};
 
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
 	edp_panel: edp-panel {
 		compatible = "boe,nv140fhmn49";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_gpio>;
+		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
 		ports {
@@ -60,7 +67,7 @@
 	gpio-key-lid {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lidbtn_gpio>;
+		pinctrl-0 = <&lidbtn_pin>;
 
 		lid {
 			debounce-interval = <20>;
@@ -76,7 +83,7 @@
 	gpio-key-power {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_gpio>;
+		pinctrl-0 = <&pwrbtn_pin>;
 
 		power {
 			debounce-interval = <20>;
@@ -117,7 +124,7 @@
 		clocks = <&rk808 1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_gpio>;
+		pinctrl-0 = <&wifi_enable_h_pin>;
 		post-power-on-delay-ms = <100>;
 		power-off-delay-us = <500000>;
 
@@ -129,7 +136,7 @@
 	es8316-sound {
 		compatible = "simple-audio-card";
 		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_gpio>;
+		pinctrl-0 = <&hp_det_pin>;
 		simple-audio-card,name = "rockchip,es8316-codec";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,mclk-fs = <256>;
@@ -213,7 +220,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_5v_gpio>;
+		pinctrl-0 = <&pwr_5v_pin>;
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -270,7 +277,7 @@
 		enable-active-high;
 		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
 		regulator-name = "vcc3v0_sd";
 		regulator-always-on;
 		regulator-min-microvolt = <3000000>;
@@ -288,7 +295,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&lcdvcc_en_gpio>;
+		pinctrl-0 = <&lcdvcc_en_pin>;
 		regulator-name = "vcc3v3_panel";
 		regulator-always-on;
 		regulator-min-microvolt = <3300000>;
@@ -317,7 +324,7 @@
 		enable-active-high;
 		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
 		regulator-name = "vcc5v0_otg";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -336,7 +343,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
 		regulator-name = "vbus_5vout";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -368,7 +375,7 @@
 
 		/* Also triggered by USB charger */
 		pinctrl-names = "default";
-		pinctrl-0 = <&dc_det_gpio>;
+		pinctrl-0 = <&dc_det_pin>;
 	};
 };
 
@@ -447,7 +454,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l_gpio>;
+		pinctrl-0 = <&pmic_int_l_pin>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -627,7 +634,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-always-on;
 		regulator-boot-on;
@@ -646,7 +653,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-always-on;
 		regulator-boot-on;
@@ -693,7 +700,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int_gpio>;
+		pinctrl-0 = <&fusb0_int_pin>;
 		vbus-supply = <&vbus_typec>;
 
 		connector {
@@ -741,11 +748,29 @@
 			};
 		};
 	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
 };
 
 &i2s1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
 	rockchip,playback-channels = <8>;
 	status = "okay";
@@ -777,49 +802,49 @@
 
 &pinctrl {
 	buttons {
-		pwrbtn_gpio: pwrbtn-gpio {
+		pwrbtn_pin: pwrbtn-pin {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		lidbtn_gpio: lidbtn-gpio {
+		lidbtn_pin: lidbtn-pin {
 			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dc-charger {
-		dc_det_gpio: dc-det-gpio {
+		dc_det_pin: dc-det-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
-		hp_det_gpio: hp-det-gpio {
+		hp_det_pin: hp-det-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	fusb302x {
-		fusb0_int_gpio: fusb0-int-gpio {
+		fusb0_int_pin: fusb0-int-pin {
 			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	i2s1 {
-		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
 			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
 		};
 	};
 
 	lcd-panel {
-		lcdvcc_en_gpio: lcdvcc-en-gpio {
+		lcdvcc_en_pin: lcdvcc-en-pin {
 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		panel_en_gpio: panel-en-gpio {
+		panel_en_pin: panel-en-pin {
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
 			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
@@ -835,58 +860,58 @@
 	};
 
 	pmic {
-		pmic_int_l_gpio: pmic-int-l-gpio {
+		pmic_int_l_pin: pmic-int-l-pin {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	sdcard {
-		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 	};
 
 	sdio-pwrseq {
-		wifi_enable_h_gpio: wifi-enable-h-gpio {
+		wifi_enable_h_pin: wifi-enable-h-pin {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb-typec {
-		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
 			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb2 {
-		pwr_5v_gpio: pwr-5v-gpio {
+		pwr_5v_pin: pwr-5v-pin {
 			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	wireless-bluetooth {
-		bt_wake_gpio: bt-wake-gpio {
+		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_host_wake_gpio: bt-host-wake-gpio {
+		bt_host_wake_pin: bt-host-wake-pin {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_reset_gpio: bt-reset-gpio {
+		bt_reset_pin: bt-reset-pin {
 			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -1034,7 +1059,7 @@
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		max-speed = <1500000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&wifi_bat>;
 		vddio-supply = <&vcc_wl>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index d80d6b726820..a8d363568fd6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -15,9 +15,9 @@
 	};
 
 	leds {
-		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
-		sd-card-led {
+		sd_card_led: led-1 {
 			label = "sd_card_led";
 			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -179,7 +179,7 @@
 	};
 
 	leds {
-		led_sd_haikou: led-sd-gpio {
+		sd_card_led_pin: sd-card-led-pin {
 			rockchip,pins =
 			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 07694b196fdb..4660416c8f38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -11,9 +11,9 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_module>;
+		pinctrl-0 = <&module_led_pin>;
 
-		module-led {
+		module_led: led-0 {
 			label = "module_led";
 			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -101,7 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
@@ -157,7 +157,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
@@ -450,7 +450,7 @@
 	};
 
 	leds {
-		led_pin_module: led-module-gpio {
+		module_led_pin: module-led-pin {
 			rockchip,pins =
 			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 9f225e9c3d54..b85ec31cd283 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -61,23 +61,23 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "green:work";
 			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc1";
 		};
 
-		yellow-led {
+		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -456,7 +456,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -475,7 +475,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -595,25 +595,25 @@
 	};
 
 	leds {
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		yellow_led_gpio: yellow_led-gpio {
+		yellow_led_pin: yellow-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 3923ec01ef66..60f98a3e19d8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -390,7 +390,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -409,7 +409,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -532,11 +532,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index ba7c75c9f2a1..5e3ac589bc54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -470,12 +470,12 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins =
 				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins =
 				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6788ab28f89a..6e553ff47534 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -39,15 +39,15 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "work";
 			default-state = "on";
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "diy";
 			default-state = "off";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -445,7 +445,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -464,7 +464,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -588,11 +588,11 @@
 	};
 
 	leds {
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -612,11 +612,11 @@
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
@@ -795,7 +795,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 1bc1579674e5..701a567d7638 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -481,11 +481,11 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 2581e9cc7a1d..ada724b12f01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -209,6 +209,7 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC0_PERILP>;
 			clock-names = "apb_pclk";
 		};
@@ -219,6 +220,7 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1_PERILP>;
 			clock-names = "apb_pclk";
 		};
@@ -845,9 +847,9 @@
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
@@ -1397,6 +1399,17 @@
 			status = "disabled";
 		};
 
+		mipi_dphy_rx0: mipi-dphy-rx0 {
+			compatible = "rockchip,rk3399-mipi-dphy-rx0";
+			clocks = <&cru SCLK_MIPIDPHY_REF>,
+				 <&cru SCLK_DPHY_RX0_CFG>,
+				 <&cru PCLK_VIO_GRF>;
+			clock-names = "dphy-ref", "dphy-cfg", "grf";
+			power-domains = <&power RK3399_PD_VIO>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		u2phy0: usb2-phy@e450 {
 			compatible = "rockchip,rk3399-usb2phy";
 			reg = <0xe450 0x10>;
@@ -2485,7 +2498,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index a1783e7f769a..369de5dc0ebd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -8,11 +8,15 @@
 /dts-v1/;
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
-#include "rk3399pro-vmarc-som.dtsi"
 #include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
 
 / {
 	model = "Radxa ROCK Pi N10";
 	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
 		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 0a516334f15f..5d087be04af8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -12,30 +12,16 @@
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc3v3_pcie: vcc-pcie-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -61,23 +47,20 @@
 
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
 	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
 };
 
 &i2c0 {
 	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <180>;
 	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
 	status = "okay";
 
 	rk809: pmic@20 {
@@ -171,7 +154,8 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <900000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
 				};
 			};
 
@@ -206,7 +190,8 @@
 				regulator-min-microvolt = <1850000>;
 				regulator-max-microvolt = <1850000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
 				};
 			};
 
@@ -297,11 +282,88 @@
 	};
 };
 
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcca_1v8>;
-	sdmmc-supply = <&vccio_sd>;
 	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =	<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -317,17 +379,79 @@
 	status = "okay";
 };
 
-&tsadc {
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
 	status = "okay";
+};
+
+&tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
 };
 
-&pinctrl {
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC2 0 &pcfg_pull_up>;
-		};
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 816ac25fa1eb..da44a15a8adf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -157,7 +157,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index 693171f82ff1..617d2b1e9b1e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -42,6 +42,10 @@
 	interrupts = <0 8>;
 };
 
+&serialsc {
+	interrupts = <0 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -76,7 +80,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index 816919b42d2e..aa159a11292c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -153,7 +153,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 2c000082667c..a01579cb3b79 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -141,7 +141,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index eeb976e7892d..39ee279a1eb9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -42,6 +42,10 @@
 	interrupts = <0 8>;
 };
 
+&serialsc {
+	interrupts = <0 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -64,7 +68,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index f4a56b208837..a87b8a678719 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -936,7 +936,9 @@
 			compatible = "socionext,uniphier-ld20-pcie-phy";
 			reg = <0x66038000 0x4000>;
 			#phy-cells = <0>;
+			clock-names = "link";
 			clocks = <&sys_clk 24>;
+			reset-names = "link";
 			resets = <&sys_rst 24>;
 			socionext,syscon = <&soc_glue>;
 		};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 7c30c6b56b57..086040306fb3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -19,7 +19,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -43,6 +43,10 @@
 	interrupts = <4 8>;
 };
 
+&serialsc {
+	interrupts = <4 8>;
+};
+
 &spi0 {
 	status = "okay";
 };
@@ -97,7 +101,7 @@
 };
 
 &mdio0 {
-	ethphy0: ethphy@0 {
+	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
@@ -108,7 +112,7 @@
 };
 
 &mdio1 {
-	ethphy1: ethphy@0 {
+	ethphy1: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 72f16881cf53..0e52dadf54b3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -833,7 +833,9 @@
 			compatible = "socionext,uniphier-pxs3-pcie-phy";
 			reg = <0x66038000 0x4000>;
 			#phy-cells = <0>;
+			clock-names = "link";
 			clocks = <&sys_clk 24>;
+			reset-names = "link";
 			resets = <&sys_rst 24>;
 			socionext,syscon = <&soc_glue>;
 		};
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index b397945fdf73..05c0bebf65d4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -3,7 +3,7 @@
 # Make file to build device tree binaries for boards based on
 # Texas Instruments Inc processors
 #
-# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
 #
 
 dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 61815228e230..9edfae5944f7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy-am654-serdes.h>
 
@@ -42,7 +42,7 @@
 		 */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@1820000 {
+		gic_its: msi-controller@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -244,9 +244,43 @@
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	sdhci1: sdhci@4fa0000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,otap-del-sel-ddr52 = <0x4>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel = <0x2>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		no-1-8-v;
 	};
 
 	scm_conf: scm_conf@100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index ae5f813d0cac..8c1abcfe0860 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 54a133fa1bf2..5f55b9e82cf1 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_wakeup {
@@ -34,6 +34,11 @@
 		};
 	};
 
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x43000014 0x4>;
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		reg = <0x4301c000 0x118>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 5be75e430965..27c0406b10ba 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 2f3d3316a1cf..611e66207010 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -167,6 +167,19 @@
 		>;
 	};
 
+	main_mmc1_pins_default: main_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+		>;
+	};
+
 	usb1_pins_default: usb1_pins_default {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
@@ -300,6 +313,18 @@
 	disable-wp;
 };
 
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
 &dwc3_1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
index b221abf43ac2..f0a6541b8042 100644
--- a/arch/arm64/boot/dts/ti/k3-am654.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC family in Quad core configuration
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "k3-am65.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 6df823aaa37c..8bc1e6ecc50e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -34,6 +34,55 @@
 			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound0: sound@0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
 };
 
 &main_pmx0 {
@@ -60,6 +109,7 @@
 	main_usbss0_pins_default: main_usbss0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
 		>;
 	};
 
@@ -103,10 +153,24 @@
 		>;
 	};
 
-	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+	mcasp10_pins_default: mcasp10_pins_default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
-		 >;
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
 	};
 };
 
@@ -335,16 +399,44 @@
 	status = "disabled";
 };
 
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+		      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+		      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+		      <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
+		      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
 &usbss0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_usbss0_pins_default>;
-	ti,usb2-only;
 	ti,vbus-divider;
 };
 
 &usb0 {
 	dr_mode = "otg";
-	maximum-speed = "high-speed";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
 };
 
 &usbss1 {
@@ -407,6 +499,22 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		p09 {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10 {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
 	};
 };
 
@@ -429,6 +537,12 @@
 	};
 };
 
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
 &main_i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
@@ -440,6 +554,31 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
 };
 
 &main_i2c6 {
@@ -492,3 +631,23 @@
 				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
 				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
 };
+
+&mcasp10 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 96c929da639d..d14060207f00 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -2,8 +2,11 @@
 /*
  * Device Tree Source for J721E SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/mux/mux-j721e-wiz.h>
 
 &cbass_main {
 	msmc_ram: sram@70000000 {
@@ -18,6 +21,38 @@
 		};
 	};
 
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+				      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+				      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
+				      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+	    };
+	};
+
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
 		#address-cells = <2>;
@@ -31,7 +66,7 @@
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@1820000 {
+		gic_its: msi-controller@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -95,7 +130,7 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		smmu0: smmu@36600000 {
+		smmu0: iommu@36600000 {
 			compatible = "arm,smmu-v3";
 			reg = <0x0 0x36600000 0x0 0x100000>;
 			interrupt-parent = <&gic500>;
@@ -277,6 +312,246 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	dummy_cmn_refclk: dummy-cmn-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	dummy_cmn_refclk1: dummy-cmn-refclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	serdes_wiz0: wiz@5000000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 0>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz0_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5000000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz0 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz1: wiz@5010000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+		wiz1_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 293 0>;
+		};
+
+		wiz1_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{
+			clocks = <&wiz1_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz1_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes1: serdes@5010000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz1 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+		wiz2_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 294 0>;
+		};
+
+		wiz2_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz2_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz2_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz2 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz3: wiz@5030000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+		wiz3_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 295 0>;
+		};
+
+		wiz3_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz3_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz3_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes3: serdes@5030000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz3 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index dc31bd0434cb..30a735bcd0c8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -48,6 +48,11 @@
 		};
 	};
 
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 7680109ca60a..8fa3361e5e45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 2f9a56d9b114..d035b61e0e16 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for J721E SoC Family
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>